! Started logfile: J1125+2610_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:23:00 2017 obs J1125+2610_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1125+2610_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.522222 visibilities/baseline/integration-bin. ! Found source: J1125+2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1125+2610_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.300892Jy sigma=0.003631 ! Fit after self-cal, rms=0.288826Jy sigma=0.003477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=6.938 mas, bpa=17.36 degrees ! Estimated noise=1897.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.605987 Jy ! Component: 100 - total flux cleaned = 0.771527 Jy ! Total flux subtracted in 100 components = 0.771527 Jy ! Clean residual min=-0.043826 max=0.072444 Jy/beam ! Clean residual mean=0.000045 rms=0.013822 Jy/beam ! Combined flux in latest and established models = 0.771527 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.771527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184963Jy sigma=0.002011 ! Fit after self-cal, rms=0.184620Jy sigma=0.002008 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=7.111 mas, bpa=17.29 degrees ! Estimated noise=1591.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877493 Jy ! Component: 100 - total flux cleaned = 0.132263 Jy ! Component: 150 - total flux cleaned = 0.159258 Jy ! Component: 200 - total flux cleaned = 0.177904 Jy ! Total flux subtracted in 200 components = 0.177904 Jy ! Clean residual min=-0.030241 max=0.030976 Jy/beam ! Clean residual mean=0.000039 rms=0.007779 Jy/beam ! Combined flux in latest and established models = 0.949431 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.949431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131626Jy sigma=0.001432 ! Fit after self-cal, rms=0.131268Jy sigma=0.001427 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.10 ! LA 0.97 MK 1.06 NL 0.98 OV 1.00* ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.03 KP 1.01 ! LA 0.96 MK 1.07 NL 1.00 OV 1.00* ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.02 KP 0.87 ! LA 0.77 MK 1.08 NL 1.17 OV 1.00* ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.97 KP 0.82 ! LA 0.80 MK 1.06 NL 1.06 OV 1.00* ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.131268Jy sigma=0.001427 ! Fit after self-cal, rms=0.067994Jy sigma=0.000809 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.165 mas, bpa=17.42 degrees ! Estimated noise=1584.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829859 Jy ! Component: 100 - total flux cleaned = 0.00822583 Jy ! Component: 150 - total flux cleaned = 0.00824644 Jy ! Component: 200 - total flux cleaned = 0.00825266 Jy ! Total flux subtracted in 200 components = 0.00825266 Jy ! Clean residual min=-0.006020 max=0.006105 Jy/beam ! Clean residual mean=-0.000002 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.957684 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.957684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064985Jy sigma=0.000774 ! Fit after self-cal, rms=0.064853Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064853Jy sigma=0.000772 ! Fit after self-cal, rms=0.064570Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.166 mas, bpa=17.29 degrees ! Estimated noise=1582.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352106 Jy ! Component: 100 - total flux cleaned = 0.00330822 Jy ! Component: 150 - total flux cleaned = 0.00309123 Jy ! Component: 200 - total flux cleaned = 0.00281238 Jy ! Total flux subtracted in 200 components = 0.00281238 Jy ! Clean residual min=-0.004989 max=0.004707 Jy/beam ! Clean residual mean=-0.000002 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.960496 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.960496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064028Jy sigma=0.000764 ! Fit after self-cal, rms=0.064010Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.1883e-05 Jy ! Component: 100 - total flux cleaned = -0.000220435 Jy ! Component: 150 - total flux cleaned = -0.000283349 Jy ! Component: 200 - total flux cleaned = -0.000285505 Jy ! Total flux subtracted in 200 components = -0.000285505 Jy ! Clean residual min=-0.004628 max=0.004566 Jy/beam ! Clean residual mean=-0.000001 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.960211 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.960211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063861Jy sigma=0.000762 ! Fit after self-cal, rms=0.063860Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063860Jy sigma=0.000762 ! Fit after self-cal, rms=0.063787Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=7.167 mas, bpa=17.25 degrees ! Estimated noise=1581.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340794 Jy ! Component: 100 - total flux cleaned = 0.000236805 Jy ! Component: 150 - total flux cleaned = 0.000149948 Jy ! Component: 200 - total flux cleaned = 0.00011111 Jy ! Total flux subtracted in 200 components = 0.00011111 Jy ! Clean residual min=-0.004336 max=0.004331 Jy/beam ! Clean residual mean=-0.000001 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.960322 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 112 components and 0.960322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063710Jy sigma=0.000761 ! Fit after self-cal, rms=0.063708Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244747 Jy ! Component: 100 - total flux cleaned = 0.000243471 Jy ! Component: 150 - total flux cleaned = 0.000213266 Jy ! Component: 200 - total flux cleaned = 0.00018493 Jy ! Total flux subtracted in 200 components = 0.00018493 Jy ! Clean residual min=-0.004208 max=0.004288 Jy/beam ! Clean residual mean=-0.000000 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.960507 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 120 components and 0.960507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063679Jy sigma=0.000761 ! Fit after self-cal, rms=0.063679Jy sigma=0.000761 ! Inverting map ! Added new window around map position (-100, -43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001282 Jy ! Component: 100 - total flux cleaned = 0.00203348 Jy ! Component: 150 - total flux cleaned = 0.00277046 Jy ! Component: 200 - total flux cleaned = 0.00337223 Jy ! Total flux subtracted in 200 components = 0.00337223 Jy ! Clean residual min=-0.003657 max=0.003229 Jy/beam ! Clean residual mean=0.000001 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.963879 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.963879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063355Jy sigma=0.000757 ! Fit after self-cal, rms=0.063357Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063357Jy sigma=0.000757 ! Fit after self-cal, rms=0.063338Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.02 mas, bmaj=9.21 mas, bpa=3.427 degrees ! Estimated noise=2016.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120515 Jy ! Component: 100 - total flux cleaned = 0.00173992 Jy ! Component: 150 - total flux cleaned = 0.00199348 Jy ! Component: 200 - total flux cleaned = 0.00218384 Jy ! Total flux subtracted in 200 components = 0.00218384 Jy ! Clean residual min=-0.003004 max=0.002645 Jy/beam ! Clean residual mean=0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.966063 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 155 components and 0.966063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063324Jy sigma=0.000757 ! Fit after self-cal, rms=0.063323Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020255 Jy ! Component: 100 - total flux cleaned = 0.000400732 Jy ! Component: 150 - total flux cleaned = 0.00048712 Jy ! Component: 200 - total flux cleaned = 0.000566692 Jy ! Total flux subtracted in 200 components = 0.000566692 Jy ! Clean residual min=-0.002933 max=0.002542 Jy/beam ! Clean residual mean=0.000003 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.966629 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 164 components and 0.96663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063322Jy sigma=0.000757 ! Fit after self-cal, rms=0.063322Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.169 mas, bpa=17.25 degrees ! Estimated noise=1581.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 7.169 at 17.25 degrees (North through East) ! Clean map min=-0.0048311 max=0.78177 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063322Jy sigma=0.000757 ! Fit after self-cal, rms=0.057716Jy sigma=0.000685 ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.17 mas, bpa=17.24 degrees ! Estimated noise=1580.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.39521e-05 Jy ! Component: 100 - total flux cleaned = 0.000324357 Jy ! Component: 150 - total flux cleaned = 0.000325133 Jy ! Component: 200 - total flux cleaned = 0.00028637 Jy ! Total flux subtracted in 200 components = 0.00028637 Jy ! Clean residual min=-0.002979 max=0.002951 Jy/beam ! Clean residual mean=0.000001 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.966916 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 178 components and 0.966916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057637Jy sigma=0.000685 ! Fit after self-cal, rms=0.057639Jy sigma=0.000684 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193864 Jy ! Component: 100 - total flux cleaned = 0.000128783 Jy ! Component: 150 - total flux cleaned = 0.000129617 Jy ! Component: 200 - total flux cleaned = 7.17943e-05 Jy ! Total flux subtracted in 200 components = 7.17943e-05 Jy ! Clean residual min=-0.002928 max=0.002926 Jy/beam ! Clean residual mean=0.000001 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.966988 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 193 components and 0.966988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057604Jy sigma=0.000684 ! Fit after self-cal, rms=0.057605Jy sigma=0.000684 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057605Jy sigma=0.000684 ! Fit after self-cal, rms=0.057612Jy sigma=0.000684 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=6.976 mas, bpa=17.3 degrees ! Estimated noise=1870.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.597381 Jy ! Component: 100 - total flux cleaned = 0.754833 Jy ! Component: 150 - total flux cleaned = 0.829297 Jy ! Component: 200 - total flux cleaned = 0.869055 Jy ! Total flux subtracted in 200 components = 0.869055 Jy ! Clean residual min=-0.014974 max=0.022386 Jy/beam ! Clean residual mean=0.000017 rms=0.004639 Jy/beam ! Combined flux in latest and established models = 0.869056 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.869056 Jy ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.17 mas, bpa=17.24 degrees ! Estimated noise=1580.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294704 Jy ! Component: 100 - total flux cleaned = 0.048214 Jy ! Component: 150 - total flux cleaned = 0.0612488 Jy ! Component: 200 - total flux cleaned = 0.0705532 Jy ! Total flux subtracted in 200 components = 0.0705532 Jy ! Clean residual min=-0.006524 max=0.006495 Jy/beam ! Clean residual mean=0.000006 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.939609 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 48 components and 0.939609 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.019 mas, bmaj=9.211 mas, bpa=3.414 degrees ! Estimated noise=2015.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105216 Jy ! Component: 100 - total flux cleaned = 0.0155544 Jy ! Component: 150 - total flux cleaned = 0.0188954 Jy ! Component: 200 - total flux cleaned = 0.0210128 Jy ! Total flux subtracted in 200 components = 0.0210128 Jy ! Clean residual min=-0.004212 max=0.003468 Jy/beam ! Clean residual mean=-0.000001 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.960622 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115526 Jy ! Component: 100 - total flux cleaned = 0.00200576 Jy ! Component: 150 - total flux cleaned = 0.00275785 Jy ! Component: 200 - total flux cleaned = 0.00318901 Jy ! Total flux subtracted in 200 components = 0.00318901 Jy ! Clean residual min=-0.003642 max=0.002865 Jy/beam ! Clean residual mean=-0.000001 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.963811 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 108 components and 0.963811 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.17 mas, bpa=17.24 degrees ! Estimated noise=1580.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423631 Jy ! Component: 100 - total flux cleaned = 0.00028035 Jy ! Component: 150 - total flux cleaned = 0.000766228 Jy ! Component: 200 - total flux cleaned = 0.000767737 Jy ! Total flux subtracted in 200 components = 0.000767737 Jy ! Clean residual min=-0.003690 max=0.003368 Jy/beam ! Clean residual mean=-0.000000 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.964578 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.964578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057962Jy sigma=0.000688 ! Fit after self-cal, rms=0.057907Jy sigma=0.000687 wmodel J1125+2610_S_2015_01_23_pus_map.mod ! Writing 130 model components to file: J1125+2610_S_2015_01_23_pus_map.mod wobs J1125+2610_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1125+2610_S_2015_01_23_pus_uvs.fits wwins J1125+2610_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J1125+2610_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.12369e-05 Jy ! Component: 100 - total flux cleaned = 0.00030041 Jy ! Component: 150 - total flux cleaned = 0.000459237 Jy ! Component: 200 - total flux cleaned = 0.000312469 Jy ! Component: 250 - total flux cleaned = 0.000265062 Jy ! Component: 300 - total flux cleaned = 0.000263845 Jy ! Component: 350 - total flux cleaned = 0.000305475 Jy ! Component: 400 - total flux cleaned = 0.000263685 Jy ! Component: 450 - total flux cleaned = 0.000385702 Jy ! Component: 500 - total flux cleaned = 0.000424333 Jy ! Component: 550 - total flux cleaned = 0.000461345 Jy ! Component: 600 - total flux cleaned = 0.000496442 Jy ! Component: 650 - total flux cleaned = 0.00053153 Jy ! Component: 700 - total flux cleaned = 0.000635368 Jy ! Component: 750 - total flux cleaned = 0.000702699 Jy ! Component: 800 - total flux cleaned = 0.000768638 Jy ! Component: 850 - total flux cleaned = 0.000801443 Jy ! Component: 900 - total flux cleaned = 0.000894979 Jy ! Component: 950 - total flux cleaned = 0.000925124 Jy ! Component: 1000 - total flux cleaned = 0.00101375 Jy ! Component: 1050 - total flux cleaned = 0.00101338 Jy ! Component: 1100 - total flux cleaned = 0.000985038 Jy ! Component: 1150 - total flux cleaned = 0.000928813 Jy ! Component: 1200 - total flux cleaned = 0.000901033 Jy ! Component: 1250 - total flux cleaned = 0.000819038 Jy ! Component: 1300 - total flux cleaned = 0.000685762 Jy ! Component: 1350 - total flux cleaned = 0.000633531 Jy ! Component: 1400 - total flux cleaned = 0.000530521 Jy ! Component: 1450 - total flux cleaned = 0.000479671 Jy ! Component: 1500 - total flux cleaned = 0.000355252 Jy ! Component: 1550 - total flux cleaned = 0.000281737 Jy ! Component: 1600 - total flux cleaned = 0.000184785 Jy ! Component: 1650 - total flux cleaned = 8.95316e-05 Jy ! Component: 1700 - total flux cleaned = 6.62606e-05 Jy ! Component: 1750 - total flux cleaned = 2.00819e-05 Jy ! Component: 1800 - total flux cleaned = -2.69878e-06 Jy ! Component: 1850 - total flux cleaned = -7.01238e-05 Jy ! Component: 1900 - total flux cleaned = -7.01116e-05 Jy ! Component: 1950 - total flux cleaned = -0.000179923 Jy ! Component: 2000 - total flux cleaned = -0.000288321 Jy ! Component: 2050 - total flux cleaned = -0.000374104 Jy ! Component: 2100 - total flux cleaned = -0.000458954 Jy ! Component: 2150 - total flux cleaned = -0.000626896 Jy ! Component: 2200 - total flux cleaned = -0.000647497 Jy ! Component: 2250 - total flux cleaned = -0.000791919 Jy ! Component: 2300 - total flux cleaned = -0.000853245 Jy ! Component: 2350 - total flux cleaned = -0.000975396 Jy ! Component: 2400 - total flux cleaned = -0.00101568 Jy ! Component: 2450 - total flux cleaned = -0.00111561 Jy ! Component: 2500 - total flux cleaned = -0.00117504 Jy ! Component: 2550 - total flux cleaned = -0.00119473 Jy ! Component: 2600 - total flux cleaned = -0.00127304 Jy ! Component: 2650 - total flux cleaned = -0.00129252 Jy ! Component: 2700 - total flux cleaned = -0.00133109 Jy ! Component: 2750 - total flux cleaned = -0.00136958 Jy ! Component: 2800 - total flux cleaned = -0.00133141 Jy ! Component: 2850 - total flux cleaned = -0.00140762 Jy ! Component: 2900 - total flux cleaned = -0.00138866 Jy ! Component: 2950 - total flux cleaned = -0.00138877 Jy ! Component: 3000 - total flux cleaned = -0.0013513 Jy ! Component: 3050 - total flux cleaned = -0.00135139 Jy ! Component: 3100 - total flux cleaned = -0.00129573 Jy ! Component: 3150 - total flux cleaned = -0.00124017 Jy ! Component: 3200 - total flux cleaned = -0.00118462 Jy ! Component: 3250 - total flux cleaned = -0.00111057 Jy ! Component: 3300 - total flux cleaned = -0.00101834 Jy ! Component: 3350 - total flux cleaned = -0.000999802 Jy ! Component: 3400 - total flux cleaned = -0.000962853 Jy ! Component: 3450 - total flux cleaned = -0.000889257 Jy ! Component: 3500 - total flux cleaned = -0.000870795 Jy ! Component: 3550 - total flux cleaned = -0.000778393 Jy ! Component: 3600 - total flux cleaned = -0.000723108 Jy ! Component: 3650 - total flux cleaned = -0.000667482 Jy ! Component: 3700 - total flux cleaned = -0.000630303 Jy ! Component: 3750 - total flux cleaned = -0.000593114 Jy ! Component: 3800 - total flux cleaned = -0.000518387 Jy ! Component: 3850 - total flux cleaned = -0.000462041 Jy ! Component: 3900 - total flux cleaned = -0.000424522 Jy ! Component: 3950 - total flux cleaned = -0.000386699 Jy ! Component: 4000 - total flux cleaned = -0.000367599 Jy ! Component: 4050 - total flux cleaned = -0.000348636 Jy ! Total flux subtracted in 4096 components = -0.000348691 Jy ! Clean residual min=-0.001112 max=0.001094 Jy/beam ! Clean residual mean=0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.96423 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 351 components and 0.964229 Jy ![Exited script file: muppet] wmap "J1125+2610_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 7.17 at 17.24 degrees (North through East) ! Clean map min=-0.0033948 max=0.78209 Jy/beam ! Writing clean map to FITS file: J1125+2610_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.782088 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000286352 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.109841 0.109841 0.219683 0.439366 0.878731 1.75746 3.51492 7.02985 14.0597 28.1194 56.2388 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.782 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 7.17 at 17.24 degrees (North through East) ! Clean map min=-0.0033948 max=0.78209 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1125+2610_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:23:05 2017