! Started logfile: J1124+2307_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:25:29 2017 obs J1124+2307_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1124+2307_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1124+2307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1124+2307_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919004Jy sigma=0.013944 ! Fit after self-cal, rms=0.901415Jy sigma=0.013673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=4.813 mas, bpa=5.42 degrees ! Estimated noise=857.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075448 Jy ! Component: 100 - total flux cleaned = 0.0922003 Jy ! Total flux subtracted in 100 components = 0.0922003 Jy ! Clean residual min=-0.004587 max=0.006113 Jy/beam ! Clean residual mean=-0.000011 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.0922003 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0922003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066754Jy sigma=0.000912 ! Fit after self-cal, rms=0.066754Jy sigma=0.000912 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=5.685 mas, bpa=3.889 degrees ! Estimated noise=622.367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822566 Jy ! Component: 100 - total flux cleaned = 0.012412 Jy ! Component: 150 - total flux cleaned = 0.0149674 Jy ! Component: 200 - total flux cleaned = 0.0166025 Jy ! Total flux subtracted in 200 components = 0.0166025 Jy ! Clean residual min=-0.003615 max=0.004134 Jy/beam ! Clean residual mean=-0.000012 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.108803 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.108803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065539Jy sigma=0.000900 ! Fit after self-cal, rms=0.065566Jy sigma=0.000900 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.03 ! MK 0.96 NL 1.03 OV 0.92 PT 1.02 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.94 ! MK 1.01 NL 1.05 OV 1.03 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.80 ! MK 1.00 NL 1.04 OV 0.95 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.92 ! MK 1.00 NL 1.16 OV 1.00 PT 1.05 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.065566Jy sigma=0.000900 ! Fit after self-cal, rms=0.064370Jy sigma=0.000886 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=5.722 mas, bpa=3.784 degrees ! Estimated noise=625.156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882686 Jy ! Component: 100 - total flux cleaned = 0.00100864 Jy ! Component: 150 - total flux cleaned = 0.00105781 Jy ! Component: 200 - total flux cleaned = 0.00104507 Jy ! Total flux subtracted in 200 components = 0.00104507 Jy ! Clean residual min=-0.003155 max=0.003483 Jy/beam ! Clean residual mean=-0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.109848 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.109848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064346Jy sigma=0.000886 ! Fit after self-cal, rms=0.064244Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064244Jy sigma=0.000886 ! Fit after self-cal, rms=0.063133Jy sigma=0.000879 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=5.714 mas, bpa=3.882 degrees ! Estimated noise=624.531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224537 Jy ! Component: 100 - total flux cleaned = -0.00015184 Jy ! Component: 150 - total flux cleaned = -0.000132374 Jy ! Component: 200 - total flux cleaned = -0.000132558 Jy ! Total flux subtracted in 200 components = -0.000132558 Jy ! Clean residual min=-0.001941 max=0.002268 Jy/beam ! Clean residual mean=-0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.109715 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.109715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063114Jy sigma=0.000878 ! Fit after self-cal, rms=0.063109Jy sigma=0.000878 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, -71.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000753328 Jy ! Component: 100 - total flux cleaned = 0.000579506 Jy ! Component: 150 - total flux cleaned = 0.000482731 Jy ! Component: 200 - total flux cleaned = 0.000352868 Jy ! Total flux subtracted in 200 components = 0.000352868 Jy ! Clean residual min=-0.001684 max=0.001712 Jy/beam ! Clean residual mean=-0.000003 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.110068 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.110068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063035Jy sigma=0.000877 ! Fit after self-cal, rms=0.063025Jy sigma=0.000877 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063025Jy sigma=0.000877 ! Fit after self-cal, rms=0.062933Jy sigma=0.000877 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=5.719 mas, bpa=4.161 degrees ! Estimated noise=624.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.84235e-05 Jy ! Component: 100 - total flux cleaned = 0.000101255 Jy ! Component: 150 - total flux cleaned = 8.09487e-05 Jy ! Component: 200 - total flux cleaned = 6.16914e-05 Jy ! Total flux subtracted in 200 components = 6.16914e-05 Jy ! Clean residual min=-0.001583 max=0.001502 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.11013 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.11013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062914Jy sigma=0.000877 ! Fit after self-cal, rms=0.062906Jy sigma=0.000876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67645e-05 Jy ! Component: 100 - total flux cleaned = -8.66155e-06 Jy ! Component: 150 - total flux cleaned = -8.53425e-06 Jy ! Component: 200 - total flux cleaned = -4.13333e-05 Jy ! Total flux subtracted in 200 components = -4.13333e-05 Jy ! Clean residual min=-0.001576 max=0.001477 Jy/beam ! Clean residual mean=-0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.110089 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.110089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062895Jy sigma=0.000876 ! Fit after self-cal, rms=0.062896Jy sigma=0.000876 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062896Jy sigma=0.000876 ! Fit after self-cal, rms=0.062849Jy sigma=0.000876 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.918 mas, bmaj=10.06 mas, bpa=4.659 degrees ! Estimated noise=745.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502283 Jy ! Component: 100 - total flux cleaned = 0.000758581 Jy ! Component: 150 - total flux cleaned = 0.000858383 Jy ! Component: 200 - total flux cleaned = 0.000954942 Jy ! Total flux subtracted in 200 components = 0.000954942 Jy ! Clean residual min=-0.001321 max=0.001135 Jy/beam ! Clean residual mean=-0.000001 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.111043 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.111043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062847Jy sigma=0.000876 ! Fit after self-cal, rms=0.062842Jy sigma=0.000876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.93359e-05 Jy ! Component: 100 - total flux cleaned = 0.000146758 Jy ! Component: 150 - total flux cleaned = 0.000205361 Jy ! Component: 200 - total flux cleaned = 0.000237382 Jy ! Total flux subtracted in 200 components = 0.000237382 Jy ! Clean residual min=-0.001318 max=0.001130 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.111281 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.111281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062841Jy sigma=0.000876 ! Fit after self-cal, rms=0.062842Jy sigma=0.000876 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.72 mas, bpa=4.219 degrees ! Estimated noise=624.165 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 5.72 at 4.219 degrees (North through East) ! Clean map min=-0.0016126 max=0.097522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=4.823 mas, bpa=5.429 degrees ! Estimated noise=870.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0764889 Jy ! Component: 100 - total flux cleaned = 0.0939375 Jy ! Component: 150 - total flux cleaned = 0.100622 Jy ! Component: 200 - total flux cleaned = 0.102984 Jy ! Total flux subtracted in 200 components = 0.102984 Jy ! Clean residual min=-0.003390 max=0.003476 Jy/beam ! Clean residual mean=-0.000005 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.102984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.102984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.72 mas, bpa=4.219 degrees ! Estimated noise=624.165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038806 Jy ! Component: 100 - total flux cleaned = 0.005199 Jy ! Component: 150 - total flux cleaned = 0.00591792 Jy ! Component: 200 - total flux cleaned = 0.00644008 Jy ! Total flux subtracted in 200 components = 0.00644008 Jy ! Clean residual min=-0.001626 max=0.001471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.109424 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.109424 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.918 mas, bmaj=10.06 mas, bpa=4.659 degrees ! Estimated noise=745.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090115 Jy ! Component: 100 - total flux cleaned = 0.00131698 Jy ! Component: 150 - total flux cleaned = 0.00162747 Jy ! Component: 200 - total flux cleaned = 0.00189669 Jy ! Total flux subtracted in 200 components = 0.00189669 Jy ! Clean residual min=-0.001341 max=0.001094 Jy/beam ! Clean residual mean=-0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.11132 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198883 Jy ! Component: 100 - total flux cleaned = 0.000371366 Jy ! Component: 150 - total flux cleaned = 0.000511987 Jy ! Component: 200 - total flux cleaned = 0.000626782 Jy ! Total flux subtracted in 200 components = 0.000626782 Jy ! Clean residual min=-0.001343 max=0.001120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.111947 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 103 components and 0.111947 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.72 mas, bpa=4.219 degrees ! Estimated noise=624.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447952 Jy ! Component: 100 - total flux cleaned = -0.000641449 Jy ! Component: 150 - total flux cleaned = -0.000763838 Jy ! Component: 200 - total flux cleaned = -0.000786288 Jy ! Total flux subtracted in 200 components = -0.000786288 Jy ! Clean residual min=-0.001545 max=0.001485 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.111161 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.111161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062845Jy sigma=0.000876 ! Fit after self-cal, rms=0.062846Jy sigma=0.000876 wmodel J1124+2307_S_2014_01_04_pus_map.mod ! Writing 123 model components to file: J1124+2307_S_2014_01_04_pus_map.mod wobs J1124+2307_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1124+2307_S_2014_01_04_pus_uvs.fits wwins J1124+2307_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1124+2307_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.52896e-05 Jy ! Component: 100 - total flux cleaned = -0.000265066 Jy ! Component: 150 - total flux cleaned = -0.000456643 Jy ! Component: 200 - total flux cleaned = -0.000682621 Jy ! Component: 250 - total flux cleaned = -0.000768897 Jy ! Component: 300 - total flux cleaned = -0.000852606 Jy ! Component: 350 - total flux cleaned = -0.000972886 Jy ! Component: 400 - total flux cleaned = -0.00103124 Jy ! Component: 450 - total flux cleaned = -0.00112538 Jy ! Component: 500 - total flux cleaned = -0.00121638 Jy ! Component: 550 - total flux cleaned = -0.0012696 Jy ! Component: 600 - total flux cleaned = -0.00133878 Jy ! Component: 650 - total flux cleaned = -0.00135538 Jy ! Component: 700 - total flux cleaned = -0.00137209 Jy ! Component: 750 - total flux cleaned = -0.00145305 Jy ! Component: 800 - total flux cleaned = -0.00146898 Jy ! Component: 850 - total flux cleaned = -0.00145348 Jy ! Component: 900 - total flux cleaned = -0.00149958 Jy ! Component: 950 - total flux cleaned = -0.0015145 Jy ! Component: 1000 - total flux cleaned = -0.00154376 Jy ! Component: 1050 - total flux cleaned = -0.00161549 Jy ! Component: 1100 - total flux cleaned = -0.00164362 Jy ! Component: 1150 - total flux cleaned = -0.00162975 Jy ! Component: 1200 - total flux cleaned = -0.0016574 Jy ! Component: 1250 - total flux cleaned = -0.00168463 Jy ! Component: 1300 - total flux cleaned = -0.00172475 Jy ! Component: 1350 - total flux cleaned = -0.0016723 Jy ! Component: 1400 - total flux cleaned = -0.0016986 Jy ! Component: 1450 - total flux cleaned = -0.00172418 Jy ! Component: 1500 - total flux cleaned = -0.00171155 Jy ! Component: 1550 - total flux cleaned = -0.0017365 Jy ! Component: 1600 - total flux cleaned = -0.00172431 Jy ! Component: 1650 - total flux cleaned = -0.00177272 Jy ! Component: 1700 - total flux cleaned = -0.00174882 Jy ! Component: 1750 - total flux cleaned = -0.00177252 Jy ! Component: 1800 - total flux cleaned = -0.00180742 Jy ! Component: 1850 - total flux cleaned = -0.00180753 Jy ! Component: 1900 - total flux cleaned = -0.0018417 Jy ! Component: 1950 - total flux cleaned = -0.00185294 Jy ! Component: 2000 - total flux cleaned = -0.001842 Jy ! Component: 2050 - total flux cleaned = -0.00186398 Jy ! Component: 2100 - total flux cleaned = -0.00190736 Jy ! Component: 2150 - total flux cleaned = -0.0019181 Jy ! Component: 2200 - total flux cleaned = -0.00194973 Jy ! Component: 2250 - total flux cleaned = -0.00199141 Jy ! Component: 2300 - total flux cleaned = -0.0019914 Jy ! Component: 2350 - total flux cleaned = -0.00201192 Jy ! Component: 2400 - total flux cleaned = -0.00204232 Jy ! Component: 2450 - total flux cleaned = -0.00207245 Jy ! Component: 2500 - total flux cleaned = -0.00208233 Jy ! Component: 2550 - total flux cleaned = -0.00210209 Jy ! Component: 2600 - total flux cleaned = -0.00210217 Jy ! Component: 2650 - total flux cleaned = -0.00212155 Jy ! Component: 2700 - total flux cleaned = -0.00212158 Jy ! Component: 2750 - total flux cleaned = -0.00217854 Jy ! Component: 2800 - total flux cleaned = -0.00217852 Jy ! Component: 2850 - total flux cleaned = -0.00221566 Jy ! Component: 2900 - total flux cleaned = -0.00221556 Jy ! Component: 2950 - total flux cleaned = -0.00222481 Jy ! Component: 3000 - total flux cleaned = -0.00224298 Jy ! Component: 3050 - total flux cleaned = -0.00225206 Jy ! Component: 3100 - total flux cleaned = -0.00226996 Jy ! Component: 3150 - total flux cleaned = -0.00228755 Jy ! Component: 3200 - total flux cleaned = -0.00229635 Jy ! Component: 3250 - total flux cleaned = -0.00228774 Jy ! Component: 3300 - total flux cleaned = -0.00231373 Jy ! Component: 3350 - total flux cleaned = -0.00233089 Jy ! Component: 3400 - total flux cleaned = -0.00234787 Jy ! Component: 3450 - total flux cleaned = -0.00234784 Jy ! Component: 3500 - total flux cleaned = -0.00235626 Jy ! Component: 3550 - total flux cleaned = -0.00237296 Jy ! Component: 3600 - total flux cleaned = -0.00238952 Jy ! Component: 3650 - total flux cleaned = -0.0023978 Jy ! Component: 3700 - total flux cleaned = -0.00243883 Jy ! Component: 3750 - total flux cleaned = -0.0024551 Jy ! Component: 3800 - total flux cleaned = -0.0024632 Jy ! Component: 3850 - total flux cleaned = -0.00249534 Jy ! Component: 3900 - total flux cleaned = -0.0025193 Jy ! Component: 3950 - total flux cleaned = -0.00251926 Jy ! Component: 4000 - total flux cleaned = -0.0025509 Jy ! Component: 4050 - total flux cleaned = -0.00258235 Jy ! Total flux subtracted in 4096 components = -0.00261356 Jy ! Clean residual min=-0.000411 max=0.000507 Jy/beam ! Clean residual mean=0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.108547 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 361 components and 0.108547 Jy ![Exited script file: muppet] wmap "J1124+2307_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 5.72 at 4.219 degrees (North through East) ! Clean map min=-0.001599 max=0.098299 Jy/beam ! Writing clean map to FITS file: J1124+2307_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0982993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127613 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.389464 0.389464 0.778927 1.55785 3.11571 6.23142 12.4628 24.9257 49.8513 99.7027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 5.72 at 4.219 degrees (North through East) ! Clean map min=-0.001599 max=0.098299 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1124+2307_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:33 2017