! Started logfile: J1120+0704_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:25:24 2017 obs J1120+0704_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1120+0704_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1120+0704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1120+0704_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894958Jy sigma=0.012309 ! Fit after self-cal, rms=0.816620Jy sigma=0.011390 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=5.715 mas, bpa=1.839 degrees ! Estimated noise=883.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14378 Jy ! Component: 100 - total flux cleaned = 0.176053 Jy ! Total flux subtracted in 100 components = 0.176053 Jy ! Clean residual min=-0.010843 max=0.016581 Jy/beam ! Clean residual mean=-0.000182 rms=0.003116 Jy/beam ! Combined flux in latest and established models = 0.176054 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.176054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090539Jy sigma=0.001057 ! Fit after self-cal, rms=0.090553Jy sigma=0.001057 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=6.479 mas, bpa=-1.604 degrees ! Estimated noise=535.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191287 Jy ! Component: 100 - total flux cleaned = 0.0305463 Jy ! Component: 150 - total flux cleaned = 0.0380436 Jy ! Component: 200 - total flux cleaned = 0.0432076 Jy ! Total flux subtracted in 200 components = 0.0432076 Jy ! Clean residual min=-0.008714 max=0.014455 Jy/beam ! Clean residual mean=-0.000097 rms=0.002461 Jy/beam ! Combined flux in latest and established models = 0.219261 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.219261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085417Jy sigma=0.000994 ! Fit after self-cal, rms=0.085451Jy sigma=0.000994 ! Inverting map ! Added new window around map position (-7, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131673 Jy ! Component: 100 - total flux cleaned = 0.0164578 Jy ! Component: 150 - total flux cleaned = 0.0187756 Jy ! Component: 200 - total flux cleaned = 0.0208846 Jy ! Total flux subtracted in 200 components = 0.0208846 Jy ! Clean residual min=-0.006825 max=0.007909 Jy/beam ! Clean residual mean=-0.000041 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.240146 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 0.240146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083002Jy sigma=0.000960 ! Fit after self-cal, rms=0.082690Jy sigma=0.000957 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 1.04 ! MK 0.99 NL 0.98 OV 1.00 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.98 ! MK 1.00 NL 1.04 OV 1.03 PT 1.00 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.83 ! MK 1.02 NL 0.98 OV 0.96 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.88 ! MK 1.03 NL 1.10 OV 1.00 PT 1.00 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.082690Jy sigma=0.000957 ! Fit after self-cal, rms=0.080039Jy sigma=0.000928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=6.527 mas, bpa=-1.724 degrees ! Estimated noise=531.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006239 Jy ! Component: 100 - total flux cleaned = 0.000749835 Jy ! Component: 150 - total flux cleaned = 0.000658905 Jy ! Component: 200 - total flux cleaned = 0.00075004 Jy ! Total flux subtracted in 200 components = 0.00075004 Jy ! Clean residual min=-0.006007 max=0.005972 Jy/beam ! Clean residual mean=0.000010 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.240896 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.240896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079659Jy sigma=0.000925 ! Fit after self-cal, rms=0.079609Jy sigma=0.000925 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079609Jy sigma=0.000925 ! Fit after self-cal, rms=0.093019Jy sigma=0.000904 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=6.484 mas, bpa=-1.623 degrees ! Estimated noise=538.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155906 Jy ! Component: 100 - total flux cleaned = 0.000862212 Jy ! Component: 150 - total flux cleaned = 0.000234213 Jy ! Component: 200 - total flux cleaned = -0.000165123 Jy ! Total flux subtracted in 200 components = -0.000165123 Jy ! Clean residual min=-0.003743 max=0.002940 Jy/beam ! Clean residual mean=0.000041 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.240731 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.240731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092806Jy sigma=0.000901 ! Fit after self-cal, rms=0.092977Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179942 Jy ! Component: 100 - total flux cleaned = 1.28216e-05 Jy ! Component: 150 - total flux cleaned = -0.000139503 Jy ! Component: 200 - total flux cleaned = -0.00018587 Jy ! Total flux subtracted in 200 components = -0.00018587 Jy ! Clean residual min=-0.003587 max=0.002755 Jy/beam ! Clean residual mean=0.000041 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.240545 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.240545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092927Jy sigma=0.000900 ! Fit after self-cal, rms=0.092943Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092943Jy sigma=0.000900 ! Fit after self-cal, rms=0.095257Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=6.48 mas, bpa=-1.548 degrees ! Estimated noise=536.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033071 Jy ! Component: 100 - total flux cleaned = -0.000763756 Jy ! Component: 150 - total flux cleaned = -0.00119012 Jy ! Component: 200 - total flux cleaned = -0.00156865 Jy ! Total flux subtracted in 200 components = -0.00156865 Jy ! Clean residual min=-0.003266 max=0.002346 Jy/beam ! Clean residual mean=0.000036 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.238976 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.238976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095200Jy sigma=0.000898 ! Fit after self-cal, rms=0.095210Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.07807e-05 Jy ! Component: 100 - total flux cleaned = -0.000309814 Jy ! Component: 150 - total flux cleaned = -0.000376148 Jy ! Component: 200 - total flux cleaned = -0.000438186 Jy ! Total flux subtracted in 200 components = -0.000438186 Jy ! Clean residual min=-0.003191 max=0.002168 Jy/beam ! Clean residual mean=0.000035 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.238538 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 122 components and 0.238538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095183Jy sigma=0.000898 ! Fit after self-cal, rms=0.095199Jy sigma=0.000898 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095199Jy sigma=0.000898 ! Fit after self-cal, rms=0.096484Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=10.87 mas, bpa=7.371 degrees ! Estimated noise=631.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126129 Jy ! Component: 100 - total flux cleaned = -0.00196877 Jy ! Component: 150 - total flux cleaned = -0.00222875 Jy ! Component: 200 - total flux cleaned = -0.00235098 Jy ! Total flux subtracted in 200 components = -0.00235098 Jy ! Clean residual min=-0.003086 max=0.002779 Jy/beam ! Clean residual mean=0.000062 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.236187 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 127 components and 0.236187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096479Jy sigma=0.000897 ! Fit after self-cal, rms=0.096449Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017524 Jy ! Component: 100 - total flux cleaned = -0.000176145 Jy ! Component: 150 - total flux cleaned = -0.000176655 Jy ! Component: 200 - total flux cleaned = -0.000209095 Jy ! Total flux subtracted in 200 components = -0.000209095 Jy ! Clean residual min=-0.002983 max=0.002738 Jy/beam ! Clean residual mean=0.000061 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.235978 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 131 components and 0.235978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096445Jy sigma=0.000897 ! Fit after self-cal, rms=0.096448Jy sigma=0.000897 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=6.482 mas, bpa=-1.544 degrees ! Estimated noise=536.074 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.53 x 6.482 at -1.544 degrees (North through East) ! Clean map min=-0.0050482 max=0.18451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=5.689 mas, bpa=2.296 degrees ! Estimated noise=896.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145816 Jy ! Component: 100 - total flux cleaned = 0.178761 Jy ! Component: 150 - total flux cleaned = 0.192481 Jy ! Component: 200 - total flux cleaned = 0.200855 Jy ! Total flux subtracted in 200 components = 0.200855 Jy ! Clean residual min=-0.004578 max=0.006255 Jy/beam ! Clean residual mean=-0.000061 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.200855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.200855 Jy ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=6.482 mas, bpa=-1.544 degrees ! Estimated noise=536.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00871009 Jy ! Component: 100 - total flux cleaned = 0.0147406 Jy ! Component: 150 - total flux cleaned = 0.0192993 Jy ! Component: 200 - total flux cleaned = 0.0228709 Jy ! Total flux subtracted in 200 components = 0.0228709 Jy ! Clean residual min=-0.003219 max=0.004661 Jy/beam ! Clean residual mean=-0.000008 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.223726 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.223726 Jy ! Inverting map ! Added new window around map position (30.5, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408172 Jy ! Component: 100 - total flux cleaned = 0.00661413 Jy ! Component: 150 - total flux cleaned = 0.00786511 Jy ! Component: 200 - total flux cleaned = 0.00877723 Jy ! Total flux subtracted in 200 components = 0.00877723 Jy ! Clean residual min=-0.002642 max=0.002538 Jy/beam ! Clean residual mean=0.000018 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.232503 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.232503 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=10.87 mas, bpa=7.371 degrees ! Estimated noise=631.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170918 Jy ! Component: 100 - total flux cleaned = 0.00209127 Jy ! Component: 150 - total flux cleaned = 0.00224409 Jy ! Component: 200 - total flux cleaned = 0.00237137 Jy ! Total flux subtracted in 200 components = 0.00237137 Jy ! Clean residual min=-0.003226 max=0.002611 Jy/beam ! Clean residual mean=0.000052 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.234874 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109114 Jy ! Component: 100 - total flux cleaned = 0.000203088 Jy ! Component: 150 - total flux cleaned = 0.000286307 Jy ! Component: 200 - total flux cleaned = 0.000359373 Jy ! Total flux subtracted in 200 components = 0.000359373 Jy ! Clean residual min=-0.002973 max=0.002765 Jy/beam ! Clean residual mean=0.000054 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.235234 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 158 components and 0.235234 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=6.482 mas, bpa=-1.544 degrees ! Estimated noise=536.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263412 Jy ! Component: 100 - total flux cleaned = 0.000516687 Jy ! Component: 150 - total flux cleaned = 0.000677226 Jy ! Component: 200 - total flux cleaned = 0.000765032 Jy ! Total flux subtracted in 200 components = 0.000765032 Jy ! Clean residual min=-0.002353 max=0.002070 Jy/beam ! Clean residual mean=0.000027 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.235999 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.235999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096504Jy sigma=0.000896 ! Fit after self-cal, rms=0.096453Jy sigma=0.000896 wmodel J1120+0704_S_2014_01_04_pus_map.mod ! Writing 177 model components to file: J1120+0704_S_2014_01_04_pus_map.mod wobs J1120+0704_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1120+0704_S_2014_01_04_pus_uvs.fits wwins J1120+0704_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1120+0704_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000834021 Jy ! Component: 100 - total flux cleaned = -0.000912057 Jy ! Component: 150 - total flux cleaned = -0.000716553 Jy ! Component: 200 - total flux cleaned = -0.000499499 Jy ! Component: 250 - total flux cleaned = -0.000410415 Jy ! Component: 300 - total flux cleaned = -0.00035389 Jy ! Component: 350 - total flux cleaned = -0.000300518 Jy ! Component: 400 - total flux cleaned = -0.000326701 Jy ! Component: 450 - total flux cleaned = -0.000352228 Jy ! Component: 500 - total flux cleaned = -0.000400628 Jy ! Component: 550 - total flux cleaned = -0.000377028 Jy ! Component: 600 - total flux cleaned = -0.000241189 Jy ! Component: 650 - total flux cleaned = -0.000218837 Jy ! Component: 700 - total flux cleaned = -0.000133049 Jy ! Component: 750 - total flux cleaned = -0.000132814 Jy ! Component: 800 - total flux cleaned = -5.12641e-05 Jy ! Component: 850 - total flux cleaned = 2.80622e-05 Jy ! Component: 900 - total flux cleaned = 0.00010557 Jy ! Component: 950 - total flux cleaned = 0.000200401 Jy ! Component: 1000 - total flux cleaned = 0.000237538 Jy ! Component: 1050 - total flux cleaned = 0.00029229 Jy ! Component: 1100 - total flux cleaned = 0.000345375 Jy ! Component: 1150 - total flux cleaned = 0.000380282 Jy ! Component: 1200 - total flux cleaned = 0.000449001 Jy ! Component: 1250 - total flux cleaned = 0.000381495 Jy ! Component: 1300 - total flux cleaned = 0.000498054 Jy ! Component: 1350 - total flux cleaned = 0.000498119 Jy ! Component: 1400 - total flux cleaned = 0.000530487 Jy ! Component: 1450 - total flux cleaned = 0.000609661 Jy ! Component: 1500 - total flux cleaned = 0.000656315 Jy ! Component: 1550 - total flux cleaned = 0.000656648 Jy ! Component: 1600 - total flux cleaned = 0.000702356 Jy ! Component: 1650 - total flux cleaned = 0.000702486 Jy ! Component: 1700 - total flux cleaned = 0.000732159 Jy ! Component: 1750 - total flux cleaned = 0.000761525 Jy ! Component: 1800 - total flux cleaned = 0.000761577 Jy ! Component: 1850 - total flux cleaned = 0.000790028 Jy ! Component: 1900 - total flux cleaned = 0.000818136 Jy ! Component: 1950 - total flux cleaned = 0.000831982 Jy ! Component: 2000 - total flux cleaned = 0.000873206 Jy ! Component: 2050 - total flux cleaned = 0.000913974 Jy ! Component: 2100 - total flux cleaned = 0.000967818 Jy ! Component: 2150 - total flux cleaned = 0.000967758 Jy ! Component: 2200 - total flux cleaned = 0.000994225 Jy ! Component: 2250 - total flux cleaned = 0.00102061 Jy ! Component: 2300 - total flux cleaned = 0.0010338 Jy ! Component: 2350 - total flux cleaned = 0.00109784 Jy ! Component: 2400 - total flux cleaned = 0.00112326 Jy ! Component: 2450 - total flux cleaned = 0.00116095 Jy ! Component: 2500 - total flux cleaned = 0.00122322 Jy ! Component: 2550 - total flux cleaned = 0.00127264 Jy ! Component: 2600 - total flux cleaned = 0.00132159 Jy ! Component: 2650 - total flux cleaned = 0.00137009 Jy ! Component: 2700 - total flux cleaned = 0.00144211 Jy ! Component: 2750 - total flux cleaned = 0.00147776 Jy ! Component: 2800 - total flux cleaned = 0.0015366 Jy ! Component: 2850 - total flux cleaned = 0.00159485 Jy ! Component: 2900 - total flux cleaned = 0.00164108 Jy ! Component: 2950 - total flux cleaned = 0.00168693 Jy ! Component: 3000 - total flux cleaned = 0.00172113 Jy ! Component: 3050 - total flux cleaned = 0.00173245 Jy ! Component: 3100 - total flux cleaned = 0.00178827 Jy ! Component: 3150 - total flux cleaned = 0.00175486 Jy ! Component: 3200 - total flux cleaned = 0.00177676 Jy ! Component: 3250 - total flux cleaned = 0.0017548 Jy ! Component: 3300 - total flux cleaned = 0.00173298 Jy ! Component: 3350 - total flux cleaned = 0.00172223 Jy ! Component: 3400 - total flux cleaned = 0.00172229 Jy ! Component: 3450 - total flux cleaned = 0.00171165 Jy ! Component: 3500 - total flux cleaned = 0.00166933 Jy ! Component: 3550 - total flux cleaned = 0.00170091 Jy ! Component: 3600 - total flux cleaned = 0.0016904 Jy ! Component: 3650 - total flux cleaned = 0.00164895 Jy ! Component: 3700 - total flux cleaned = 0.00165933 Jy ! Component: 3750 - total flux cleaned = 0.0016594 Jy ! Component: 3800 - total flux cleaned = 0.00165934 Jy ! Component: 3850 - total flux cleaned = 0.00163907 Jy ! Component: 3900 - total flux cleaned = 0.00161887 Jy ! Component: 3950 - total flux cleaned = 0.00161888 Jy ! Component: 4000 - total flux cleaned = 0.00160883 Jy ! Component: 4050 - total flux cleaned = 0.00157901 Jy ! Total flux subtracted in 4096 components = 0.00154935 Jy ! Clean residual min=-0.000634 max=0.000642 Jy/beam ! Clean residual mean=0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.237548 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 434 components and 0.237548 Jy ![Exited script file: muppet] wmap "J1120+0704_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.53 x 6.482 at -1.544 degrees (North through East) ! Clean map min=-0.0017526 max=0.18641 Jy/beam ! Writing clean map to FITS file: J1120+0704_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186413 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017158 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.276128 0.276128 0.552256 1.10451 2.20902 4.41805 8.8361 17.6722 35.3444 70.6888 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.53 x 6.482 at -1.544 degrees (North through East) ! Clean map min=-0.0017526 max=0.18641 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1120+0704_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:29 2017