! Started logfile: J1119+6004_X_2014_08_09_pus_uvs.log on Wed Nov 30 14:08:49 2016 obs J1119+6004_X_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1119+6004_X_2014_08_09_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78547 visibilities/baseline/integration-bin. ! Found source: J1119+6004 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 324 lines of history. ! ! Reading 44112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1119+6004_X_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977190Jy sigma=0.011288 ! Fit after self-cal, rms=0.956735Jy sigma=0.011069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.463 mas, bpa=54.65 degrees ! Estimated noise=697.645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335988 Jy ! Component: 100 - total flux cleaned = 0.0428782 Jy ! Total flux subtracted in 100 components = 0.0428782 Jy ! Clean residual min=-0.002483 max=0.004231 Jy/beam ! Clean residual mean=-0.000021 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0428783 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0428783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070153Jy sigma=0.000776 ! Fit after self-cal, rms=0.069805Jy sigma=0.000773 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521511 Jy ! Component: 100 - total flux cleaned = 0.00824854 Jy ! Total flux subtracted in 100 components = 0.00824854 Jy ! Clean residual min=-0.002485 max=0.002339 Jy/beam ! Clean residual mean=-0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0511268 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.0511268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069309Jy sigma=0.000767 ! Fit after self-cal, rms=0.069301Jy sigma=0.000767 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.287 mas, bmaj=1.731 mas, bpa=56.08 degrees ! Estimated noise=293.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310189 Jy ! Component: 100 - total flux cleaned = 0.00462134 Jy ! Component: 150 - total flux cleaned = 0.0052353 Jy ! Component: 200 - total flux cleaned = 0.00565242 Jy ! Total flux subtracted in 200 components = 0.00565242 Jy ! Clean residual min=-0.001858 max=0.001493 Jy/beam ! Clean residual mean=0.000023 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0567792 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.0567792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069152Jy sigma=0.000765 ! Fit after self-cal, rms=0.069141Jy sigma=0.000765 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 1.10 KP 0.90 ! LA 0.98 MK 1.00* NL 1.04 OV 1.03 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.01 KP 0.97 ! LA 1.01 MK 1.00* NL 1.01 OV 0.99 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.12 HN 1.07 KP 0.82 ! LA 1.01 MK 1.00* NL 1.09 OV 1.00 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.07 KP 0.78 ! LA 1.07 MK 1.00* NL 1.05 OV 1.01 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 1.00 KP 0.77 ! LA 0.99 MK 1.00* NL 1.07 OV 1.02 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.12 HN 1.02 KP 0.74 ! LA 1.08 MK 1.00* NL 1.01 OV 1.00 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.12 HN 0.98 KP 0.83 ! LA 1.16 MK 1.00* NL 1.07 OV 1.13 ! PT 1.12 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.14 HN 1.04 KP 0.77 ! LA 1.02 MK 1.00* NL 1.07 OV 1.05 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 HN 0.97 KP 0.80 ! LA 0.97 MK 1.00* NL 1.04 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.08 KP 0.80 ! LA 1.04 MK 1.00* NL 1.00 OV 1.04 ! PT 1.04 SC 0.83 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 0.87 KP 0.86 ! LA 1.08 MK 1.00* NL 1.01 OV 1.02 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.95 KP 0.86 ! LA 1.06 MK 1.00* NL 0.99 OV 0.98 ! PT 0.88 SC 0.93 ! ! ! Fit before self-cal, rms=0.069141Jy sigma=0.000765 ! Fit after self-cal, rms=0.067317Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.285 mas, bmaj=1.728 mas, bpa=56.11 degrees ! Estimated noise=290.897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364788 Jy ! Component: 100 - total flux cleaned = 0.000262163 Jy ! Component: 150 - total flux cleaned = 0.000197735 Jy ! Component: 200 - total flux cleaned = 0.000141471 Jy ! Total flux subtracted in 200 components = 0.000141471 Jy ! Clean residual min=-0.000827 max=0.001061 Jy/beam ! Clean residual mean=-0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0569207 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0569207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067300Jy sigma=0.000762 ! Fit after self-cal, rms=0.067293Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067293Jy sigma=0.000761 ! Fit after self-cal, rms=0.067345Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.283 mas, bmaj=1.719 mas, bpa=55.5 degrees ! Estimated noise=289.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209615 Jy ! Component: 100 - total flux cleaned = 0.000155909 Jy ! Component: 150 - total flux cleaned = 0.000127714 Jy ! Component: 200 - total flux cleaned = 0.000115631 Jy ! Total flux subtracted in 200 components = 0.000115631 Jy ! Clean residual min=-0.000777 max=0.000888 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0570363 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.0570363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067335Jy sigma=0.000760 ! Fit after self-cal, rms=0.067358Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.46141e-05 Jy ! Component: 100 - total flux cleaned = -1.78625e-05 Jy ! Component: 150 - total flux cleaned = -4.13661e-05 Jy ! Component: 200 - total flux cleaned = -6.24599e-05 Jy ! Total flux subtracted in 200 components = -6.24599e-05 Jy ! Clean residual min=-0.000788 max=0.000906 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0569739 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.0569739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067353Jy sigma=0.000760 ! Fit after self-cal, rms=0.067351Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067351Jy sigma=0.000760 ! Fit after self-cal, rms=0.067185Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.283 mas, bmaj=1.708 mas, bpa=55.53 degrees ! Estimated noise=288.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144696 Jy ! Component: 100 - total flux cleaned = 9.09122e-05 Jy ! Component: 150 - total flux cleaned = 7.96582e-05 Jy ! Component: 200 - total flux cleaned = 6.99069e-05 Jy ! Total flux subtracted in 200 components = 6.99069e-05 Jy ! Clean residual min=-0.000780 max=0.000862 Jy/beam ! Clean residual mean=-0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0570438 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0570438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067181Jy sigma=0.000760 ! Fit after self-cal, rms=0.067186Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.99475e-06 Jy ! Component: 100 - total flux cleaned = -4.42116e-05 Jy ! Component: 150 - total flux cleaned = -7.22034e-05 Jy ! Component: 200 - total flux cleaned = -8.95411e-05 Jy ! Total flux subtracted in 200 components = -8.95411e-05 Jy ! Clean residual min=-0.000770 max=0.000861 Jy/beam ! Clean residual mean=-0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0569542 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.0569542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067183Jy sigma=0.000760 ! Fit after self-cal, rms=0.067181Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067181Jy sigma=0.000760 ! Fit after self-cal, rms=0.067032Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=2.657 mas, bpa=-85.66 degrees ! Estimated noise=338.524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.4639e-05 Jy ! Component: 100 - total flux cleaned = -7.98955e-05 Jy ! Component: 150 - total flux cleaned = -9.23327e-05 Jy ! Component: 200 - total flux cleaned = -9.75263e-05 Jy ! Total flux subtracted in 200 components = -9.75263e-05 Jy ! Clean residual min=-0.000711 max=0.000804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0568567 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 0.0568567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067031Jy sigma=0.000760 ! Fit after self-cal, rms=0.067034Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.70426e-05 Jy ! Component: 100 - total flux cleaned = -3.45626e-05 Jy ! Component: 150 - total flux cleaned = -4.47696e-05 Jy ! Component: 200 - total flux cleaned = -4.43904e-05 Jy ! Total flux subtracted in 200 components = -4.43904e-05 Jy ! Clean residual min=-0.000712 max=0.000807 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0568123 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0568123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067033Jy sigma=0.000760 ! Fit after self-cal, rms=0.067033Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.284 mas, bmaj=1.7 mas, bpa=55.64 degrees ! Estimated noise=288.187 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.284 x 1.7 at 55.64 degrees (North through East) ! Clean map min=-0.00097925 max=0.045106 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.046 mas, bmaj=1.434 mas, bpa=54.14 degrees ! Estimated noise=675.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320285 Jy ! Component: 100 - total flux cleaned = 0.043137 Jy ! Component: 150 - total flux cleaned = 0.049092 Jy ! Component: 200 - total flux cleaned = 0.0526659 Jy ! Total flux subtracted in 200 components = 0.0526659 Jy ! Clean residual min=-0.002022 max=0.002174 Jy/beam ! Clean residual mean=-0.000011 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0526659 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0526659 Jy ! Inverting map and beam ! Estimated beam: bmin=1.284 mas, bmaj=1.7 mas, bpa=55.64 degrees ! Estimated noise=288.187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269537 Jy ! Component: 100 - total flux cleaned = 0.00345383 Jy ! Component: 150 - total flux cleaned = 0.00349261 Jy ! Component: 200 - total flux cleaned = 0.00358429 Jy ! Total flux subtracted in 200 components = 0.00358429 Jy ! Clean residual min=-0.000917 max=0.001083 Jy/beam ! Clean residual mean=-0.000003 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0562502 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 0.0562502 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=2.657 mas, bpa=-85.66 degrees ! Estimated noise=338.524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416483 Jy ! Component: 100 - total flux cleaned = 0.000434173 Jy ! Component: 150 - total flux cleaned = 0.000416999 Jy ! Component: 200 - total flux cleaned = 0.000431487 Jy ! Total flux subtracted in 200 components = 0.000431487 Jy ! Clean residual min=-0.000735 max=0.000823 Jy/beam ! Clean residual mean=-0.000002 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0566817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.24086e-05 Jy ! Component: 100 - total flux cleaned = -7.17324e-07 Jy ! Component: 150 - total flux cleaned = -1.10062e-05 Jy ! Component: 200 - total flux cleaned = -1.0808e-05 Jy ! Total flux subtracted in 200 components = -1.0808e-05 Jy ! Clean residual min=-0.000721 max=0.000829 Jy/beam ! Clean residual mean=-0.000002 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.0566709 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.0566709 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.284 mas, bmaj=1.7 mas, bpa=55.64 degrees ! Estimated noise=288.187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40209e-05 Jy ! Component: 100 - total flux cleaned = -7.95053e-05 Jy ! Component: 150 - total flux cleaned = -7.97916e-05 Jy ! Component: 200 - total flux cleaned = -8.00198e-05 Jy ! Total flux subtracted in 200 components = -8.00198e-05 Jy ! Clean residual min=-0.000839 max=0.000910 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0565909 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.0565909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067043Jy sigma=0.000760 ! Fit after self-cal, rms=0.067038Jy sigma=0.000760 wmodel J1119+6004_X_2014_08_09_pus_map.mod ! Writing 67 model components to file: J1119+6004_X_2014_08_09_pus_map.mod wobs J1119+6004_X_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1119+6004_X_2014_08_09_pus_uvs.fits wwins J1119+6004_X_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J1119+6004_X_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208816 Jy ! Component: 100 - total flux cleaned = 0.000181653 Jy ! Component: 150 - total flux cleaned = 0.000234618 Jy ! Component: 200 - total flux cleaned = 0.000246943 Jy ! Component: 250 - total flux cleaned = 0.000258882 Jy ! Component: 300 - total flux cleaned = 0.000293271 Jy ! Component: 350 - total flux cleaned = 0.0003379 Jy ! Component: 400 - total flux cleaned = 0.000370388 Jy ! Component: 450 - total flux cleaned = 0.000380991 Jy ! Component: 500 - total flux cleaned = 0.000401332 Jy ! Component: 550 - total flux cleaned = 0.000421151 Jy ! Component: 600 - total flux cleaned = 0.000430627 Jy ! Component: 650 - total flux cleaned = 0.000430539 Jy ! Component: 700 - total flux cleaned = 0.000402533 Jy ! Component: 750 - total flux cleaned = 0.000402673 Jy ! Component: 800 - total flux cleaned = 0.000402536 Jy ! Component: 850 - total flux cleaned = 0.000393774 Jy ! Component: 900 - total flux cleaned = 0.000419478 Jy ! Component: 950 - total flux cleaned = 0.000402527 Jy ! Component: 1000 - total flux cleaned = 0.000419111 Jy ! Component: 1050 - total flux cleaned = 0.000410995 Jy ! Component: 1100 - total flux cleaned = 0.000411179 Jy ! Component: 1150 - total flux cleaned = 0.000419208 Jy ! Component: 1200 - total flux cleaned = 0.000419315 Jy ! Component: 1250 - total flux cleaned = 0.000411772 Jy ! Component: 1300 - total flux cleaned = 0.000426646 Jy ! Component: 1350 - total flux cleaned = 0.000404386 Jy ! Component: 1400 - total flux cleaned = 0.000425909 Jy ! Component: 1450 - total flux cleaned = 0.000404379 Jy ! Component: 1500 - total flux cleaned = 0.000383205 Jy ! Component: 1550 - total flux cleaned = 0.000390139 Jy ! Component: 1600 - total flux cleaned = 0.00038339 Jy ! Component: 1650 - total flux cleaned = 0.000383393 Jy ! Component: 1700 - total flux cleaned = 0.00039681 Jy ! Component: 1750 - total flux cleaned = 0.000390319 Jy ! Component: 1800 - total flux cleaned = 0.00042262 Jy ! Component: 1850 - total flux cleaned = 0.000416244 Jy ! Component: 1900 - total flux cleaned = 0.000416287 Jy ! Component: 1950 - total flux cleaned = 0.000410103 Jy ! Component: 2000 - total flux cleaned = 0.000404008 Jy ! Total flux subtracted in 2048 components = 0.000397967 Jy ! Clean residual min=-0.000366 max=0.000362 Jy/beam ! Clean residual mean=-0.000000 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.0569888 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 203 components and 0.0569888 Jy ![Exited script file: muppet] wmap "J1119+6004_X_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.284 x 1.7 at 55.64 degrees (North through East) ! Clean map min=-0.0010615 max=0.044389 Jy/beam ! Writing clean map to FITS file: J1119+6004_X_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0443892 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000114619 device "J1119+6004_X_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1119+6004_X_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.774643 0.774643 1.54929 3.09857 6.19714 12.3943 24.7886 49.5771 99.1543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.284 x 1.7 at 55.64 degrees (North through East) ! Clean map min=-0.0010615 max=0.044389 Jy/beam quit ! Quitting program ! Log file J1119+6004_X_2014_08_09_pus_uvs.log closed on Wed Nov 30 14:08:53 2016