! Started logfile: J1118-1232_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:22:54 2017 obs J1118-1232_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1118-1232_S_2015_01_23_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858859 visibilities/baseline/integration-bin. ! Found source: J1118-1232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 11440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1118-1232_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.705751Jy sigma=0.006966 ! Fit after self-cal, rms=0.651120Jy sigma=0.006435 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=6.686 mas, bpa=-8.312 degrees ! Estimated noise=884.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275455 Jy ! Component: 100 - total flux cleaned = 0.346927 Jy ! Total flux subtracted in 100 components = 0.346927 Jy ! Clean residual min=-0.039777 max=0.121342 Jy/beam ! Clean residual mean=0.000210 rms=0.011577 Jy/beam ! Combined flux in latest and established models = 0.346927 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.346927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297009Jy sigma=0.002272 ! Fit after self-cal, rms=0.296617Jy sigma=0.002270 ! Inverting map ! Added new window around map position (6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103984 Jy ! Component: 100 - total flux cleaned = 0.148993 Jy ! Total flux subtracted in 100 components = 0.148993 Jy ! Clean residual min=-0.033043 max=0.052049 Jy/beam ! Clean residual mean=0.000112 rms=0.007569 Jy/beam ! Combined flux in latest and established models = 0.49592 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.49592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243838Jy sigma=0.001645 ! Fit after self-cal, rms=0.236536Jy sigma=0.001544 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430201 Jy ! Component: 100 - total flux cleaned = 0.068179 Jy ! Total flux subtracted in 100 components = 0.068179 Jy ! Clean residual min=-0.022904 max=0.022723 Jy/beam ! Clean residual mean=0.000067 rms=0.005448 Jy/beam ! Combined flux in latest and established models = 0.564099 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.564099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220489Jy sigma=0.001361 ! Fit after self-cal, rms=0.219557Jy sigma=0.001347 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=7.994 mas, bpa=-9.073 degrees ! Estimated noise=716.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371363 Jy ! Component: 100 - total flux cleaned = 0.0586601 Jy ! Component: 150 - total flux cleaned = 0.0723289 Jy ! Component: 200 - total flux cleaned = 0.0812818 Jy ! Total flux subtracted in 200 components = 0.0812818 Jy ! Clean residual min=-0.022456 max=0.021142 Jy/beam ! Clean residual mean=0.000021 rms=0.006294 Jy/beam ! Combined flux in latest and established models = 0.645381 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 81 components and 0.645381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209142Jy sigma=0.001258 ! Fit after self-cal, rms=0.208630Jy sigma=0.001252 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.86 HN 1.03 KP 1.07 ! LA 1.33 MK 1.02 NL 1.09 OV 0.95 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.08 KP 0.99 ! LA 1.27 MK 1.01 NL 1.06 OV 0.99 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 1.06 KP 0.86 ! LA 1.05 MK 1.02 NL 1.26 OV 0.90 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.00 KP 0.80 ! LA 1.12 MK 1.00 NL 0.98 OV 0.96 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.208630Jy sigma=0.001252 ! Fit after self-cal, rms=0.203719Jy sigma=0.001081 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.941 mas, bpa=-8.726 degrees ! Estimated noise=727.477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009497 Jy ! Component: 100 - total flux cleaned = 0.0113547 Jy ! Component: 150 - total flux cleaned = 0.011945 Jy ! Component: 200 - total flux cleaned = 0.0122926 Jy ! Total flux subtracted in 200 components = 0.0122926 Jy ! Clean residual min=-0.018841 max=0.018245 Jy/beam ! Clean residual mean=-0.000015 rms=0.004776 Jy/beam ! Combined flux in latest and established models = 0.657673 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.657673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202597Jy sigma=0.001074 ! Fit after self-cal, rms=0.202716Jy sigma=0.001074 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202716Jy sigma=0.001074 ! Fit after self-cal, rms=0.164236Jy sigma=0.000853 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.907 mas, bpa=-8.828 degrees ! Estimated noise=733.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703145 Jy ! Component: 100 - total flux cleaned = 0.00918176 Jy ! Component: 150 - total flux cleaned = 0.00990651 Jy ! Component: 200 - total flux cleaned = 0.010096 Jy ! Total flux subtracted in 200 components = 0.010096 Jy ! Clean residual min=-0.006210 max=0.008738 Jy/beam ! Clean residual mean=0.000006 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.667769 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.667769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163776Jy sigma=0.000848 ! Fit after self-cal, rms=0.163815Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761315 Jy ! Component: 100 - total flux cleaned = 0.0115569 Jy ! Component: 150 - total flux cleaned = 0.0138759 Jy ! Component: 200 - total flux cleaned = 0.0151398 Jy ! Total flux subtracted in 200 components = 0.0151398 Jy ! Clean residual min=-0.005419 max=0.006253 Jy/beam ! Clean residual mean=-0.000002 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.682909 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 0.682909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163318Jy sigma=0.000841 ! Fit after self-cal, rms=0.163273Jy sigma=0.000840 ! Inverting map ! Added new window around map position (12, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633969 Jy ! Component: 100 - total flux cleaned = 0.00872829 Jy ! Component: 150 - total flux cleaned = 0.00933477 Jy ! Component: 200 - total flux cleaned = 0.00987556 Jy ! Total flux subtracted in 200 components = 0.00987556 Jy ! Clean residual min=-0.005268 max=0.004863 Jy/beam ! Clean residual mean=-0.000007 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.692785 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 176 components and 0.692785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162984Jy sigma=0.000836 ! Fit after self-cal, rms=0.162947Jy sigma=0.000836 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162947Jy sigma=0.000836 ! Fit after self-cal, rms=0.160080Jy sigma=0.000825 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.907 mas, bpa=-8.838 degrees ! Estimated noise=731.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271603 Jy ! Component: 100 - total flux cleaned = 0.00336326 Jy ! Component: 150 - total flux cleaned = 0.00343786 Jy ! Component: 200 - total flux cleaned = 0.00343749 Jy ! Total flux subtracted in 200 components = 0.00343749 Jy ! Clean residual min=-0.003439 max=0.003720 Jy/beam ! Clean residual mean=-0.000007 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.696222 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 200 components and 0.696222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159993Jy sigma=0.000824 ! Fit after self-cal, rms=0.159984Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (95, -118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351653 Jy ! Component: 100 - total flux cleaned = 0.00504392 Jy ! Component: 150 - total flux cleaned = 0.00601893 Jy ! Component: 200 - total flux cleaned = 0.00651113 Jy ! Total flux subtracted in 200 components = 0.00651113 Jy ! Clean residual min=-0.003311 max=0.003049 Jy/beam ! Clean residual mean=-0.000011 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.702733 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 216 components and 0.702733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159842Jy sigma=0.000822 ! Fit after self-cal, rms=0.159848Jy sigma=0.000822 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159848Jy sigma=0.000822 ! Fit after self-cal, rms=0.159913Jy sigma=0.000822 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=14.7 mas, bpa=-7.276 degrees ! Estimated noise=972.108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278764 Jy ! Component: 100 - total flux cleaned = 0.00452323 Jy ! Component: 150 - total flux cleaned = 0.00492565 Jy ! Component: 200 - total flux cleaned = 0.00505355 Jy ! Total flux subtracted in 200 components = 0.00505355 Jy ! Clean residual min=-0.003476 max=0.003339 Jy/beam ! Clean residual mean=-0.000024 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.707787 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 231 components and 0.707787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159870Jy sigma=0.000821 ! Fit after self-cal, rms=0.159869Jy sigma=0.000821 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893356 Jy ! Component: 100 - total flux cleaned = 0.00110811 Jy ! Component: 150 - total flux cleaned = 0.00114544 Jy ! Component: 200 - total flux cleaned = 0.0011446 Jy ! Total flux subtracted in 200 components = 0.0011446 Jy ! Clean residual min=-0.003404 max=0.003204 Jy/beam ! Clean residual mean=-0.000025 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.708931 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 247 components and 0.708931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159855Jy sigma=0.000821 ! Fit after self-cal, rms=0.159855Jy sigma=0.000821 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.911 mas, bpa=-8.852 degrees ! Estimated noise=730.813 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 7.911 at -8.852 degrees (North through East) ! Clean map min=-0.0028308 max=0.35419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.616 mas, bpa=-7.939 degrees ! Estimated noise=894.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291964 Jy ! Component: 100 - total flux cleaned = 0.412394 Jy ! Component: 150 - total flux cleaned = 0.479971 Jy ! Component: 200 - total flux cleaned = 0.524572 Jy ! Total flux subtracted in 200 components = 0.524572 Jy ! Clean residual min=-0.014955 max=0.024608 Jy/beam ! Clean residual mean=0.000095 rms=0.003887 Jy/beam ! Combined flux in latest and established models = 0.524571 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.524571 Jy ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.911 mas, bpa=-8.852 degrees ! Estimated noise=730.813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515482 Jy ! Component: 100 - total flux cleaned = 0.082858 Jy ! Component: 150 - total flux cleaned = 0.103119 Jy ! Component: 200 - total flux cleaned = 0.117175 Jy ! Total flux subtracted in 200 components = 0.117175 Jy ! Clean residual min=-0.005904 max=0.008172 Jy/beam ! Clean residual mean=0.000026 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.641746 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 85 components and 0.641746 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=14.7 mas, bpa=-7.276 degrees ! Estimated noise=972.108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173581 Jy ! Component: 100 - total flux cleaned = 0.0279796 Jy ! Component: 150 - total flux cleaned = 0.0355839 Jy ! Component: 200 - total flux cleaned = 0.0413435 Jy ! Total flux subtracted in 200 components = 0.0413435 Jy ! Clean residual min=-0.004456 max=0.004275 Jy/beam ! Clean residual mean=-0.000009 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.68309 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455591 Jy ! Component: 100 - total flux cleaned = 0.00823915 Jy ! Component: 150 - total flux cleaned = 0.0112469 Jy ! Component: 200 - total flux cleaned = 0.01373 Jy ! Total flux subtracted in 200 components = 0.01373 Jy ! Clean residual min=-0.003707 max=0.003976 Jy/beam ! Clean residual mean=-0.000021 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.69682 Jy ! Adding 156 model components to the UV plane model. ! The established model now contains 224 components and 0.69682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.911 mas, bpa=-8.852 degrees ! Estimated noise=730.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305892 Jy ! Component: 100 - total flux cleaned = 0.00452743 Jy ! Component: 150 - total flux cleaned = 0.0055892 Jy ! Component: 200 - total flux cleaned = 0.00652151 Jy ! Total flux subtracted in 200 components = 0.00652151 Jy ! Clean residual min=-0.003027 max=0.002991 Jy/beam ! Clean residual mean=-0.000012 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.703341 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 248 components and 0.703341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159851Jy sigma=0.000821 ! Fit after self-cal, rms=0.159817Jy sigma=0.000820 wmodel J1118-1232_S_2015_01_23_pus_map.mod ! Writing 248 model components to file: J1118-1232_S_2015_01_23_pus_map.mod wobs J1118-1232_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1118-1232_S_2015_01_23_pus_uvs.fits wwins J1118-1232_S_2015_01_23_pus_map.win ! wwins: Wrote 5 windows to J1118-1232_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.53952e-05 Jy ! Component: 100 - total flux cleaned = 0.000362485 Jy ! Component: 150 - total flux cleaned = 0.000681001 Jy ! Component: 200 - total flux cleaned = 0.000987586 Jy ! Component: 250 - total flux cleaned = 0.00119884 Jy ! Component: 300 - total flux cleaned = 0.00136365 Jy ! Component: 350 - total flux cleaned = 0.00140457 Jy ! Component: 400 - total flux cleaned = 0.00148151 Jy ! Component: 450 - total flux cleaned = 0.00144408 Jy ! Component: 500 - total flux cleaned = 0.00148153 Jy ! Component: 550 - total flux cleaned = 0.0016241 Jy ! Component: 600 - total flux cleaned = 0.00172791 Jy ! Component: 650 - total flux cleaned = 0.00176137 Jy ! Component: 700 - total flux cleaned = 0.00186243 Jy ! Component: 750 - total flux cleaned = 0.00192826 Jy ! Component: 800 - total flux cleaned = 0.00199308 Jy ! Component: 850 - total flux cleaned = 0.0019933 Jy ! Component: 900 - total flux cleaned = 0.00208815 Jy ! Component: 950 - total flux cleaned = 0.00218058 Jy ! Component: 1000 - total flux cleaned = 0.0021803 Jy ! Component: 1050 - total flux cleaned = 0.00215059 Jy ! Component: 1100 - total flux cleaned = 0.0021215 Jy ! Component: 1150 - total flux cleaned = 0.00212196 Jy ! Component: 1200 - total flux cleaned = 0.00226352 Jy ! Component: 1250 - total flux cleaned = 0.00231908 Jy ! Component: 1300 - total flux cleaned = 0.0022361 Jy ! Component: 1350 - total flux cleaned = 0.00234504 Jy ! Component: 1400 - total flux cleaned = 0.00234516 Jy ! Component: 1450 - total flux cleaned = 0.00234545 Jy ! Component: 1500 - total flux cleaned = 0.00245107 Jy ! Component: 1550 - total flux cleaned = 0.00239922 Jy ! Component: 1600 - total flux cleaned = 0.00242484 Jy ! Component: 1650 - total flux cleaned = 0.00242483 Jy ! Component: 1700 - total flux cleaned = 0.00239965 Jy ! Component: 1750 - total flux cleaned = 0.00242415 Jy ! Component: 1800 - total flux cleaned = 0.00237491 Jy ! Component: 1850 - total flux cleaned = 0.0023749 Jy ! Component: 1900 - total flux cleaned = 0.00239929 Jy ! Component: 1950 - total flux cleaned = 0.00251893 Jy ! Component: 2000 - total flux cleaned = 0.00251878 Jy ! Component: 2050 - total flux cleaned = 0.00254203 Jy ! Component: 2100 - total flux cleaned = 0.0025886 Jy ! Component: 2150 - total flux cleaned = 0.0026808 Jy ! Component: 2200 - total flux cleaned = 0.00277215 Jy ! Component: 2250 - total flux cleaned = 0.00277239 Jy ! Component: 2300 - total flux cleaned = 0.00286233 Jy ! Component: 2350 - total flux cleaned = 0.00301793 Jy ! Component: 2400 - total flux cleaned = 0.00310582 Jy ! Component: 2450 - total flux cleaned = 0.00319325 Jy ! Component: 2500 - total flux cleaned = 0.00334516 Jy ! Component: 2550 - total flux cleaned = 0.00349549 Jy ! Component: 2600 - total flux cleaned = 0.00355933 Jy ! Component: 2650 - total flux cleaned = 0.00366518 Jy ! Component: 2700 - total flux cleaned = 0.00383321 Jy ! Component: 2750 - total flux cleaned = 0.0039583 Jy ! Component: 2800 - total flux cleaned = 0.00406171 Jy ! Component: 2850 - total flux cleaned = 0.00422618 Jy ! Component: 2900 - total flux cleaned = 0.00428729 Jy ! Component: 2950 - total flux cleaned = 0.00436837 Jy ! Component: 3000 - total flux cleaned = 0.00446879 Jy ! Component: 3050 - total flux cleaned = 0.00458857 Jy ! Component: 3100 - total flux cleaned = 0.00470771 Jy ! Component: 3150 - total flux cleaned = 0.00480626 Jy ! Component: 3200 - total flux cleaned = 0.00488482 Jy ! Component: 3250 - total flux cleaned = 0.00504047 Jy ! Component: 3300 - total flux cleaned = 0.00513705 Jy ! Component: 3350 - total flux cleaned = 0.00523304 Jy ! Component: 3400 - total flux cleaned = 0.00538577 Jy ! Component: 3450 - total flux cleaned = 0.00548064 Jy ! Component: 3500 - total flux cleaned = 0.00555616 Jy ! Component: 3550 - total flux cleaned = 0.00570608 Jy ! Component: 3600 - total flux cleaned = 0.00579923 Jy ! Component: 3650 - total flux cleaned = 0.00589186 Jy ! Component: 3700 - total flux cleaned = 0.00598381 Jy ! Component: 3750 - total flux cleaned = 0.00609363 Jy ! Component: 3800 - total flux cleaned = 0.0062028 Jy ! Component: 3850 - total flux cleaned = 0.00625683 Jy ! Component: 3900 - total flux cleaned = 0.00632885 Jy ! Component: 3950 - total flux cleaned = 0.00641818 Jy ! Component: 4000 - total flux cleaned = 0.00643581 Jy ! Component: 4050 - total flux cleaned = 0.00648879 Jy ! Total flux subtracted in 4096 components = 0.00652397 Jy ! Clean residual min=-0.001103 max=0.001011 Jy/beam ! Clean residual mean=-0.000004 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.709865 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 542 components and 0.709865 Jy ![Exited script file: muppet] wmap "J1118-1232_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 7.911 at -8.852 degrees (North through East) ! Clean map min=-0.0022187 max=0.35704 Jy/beam ! Writing clean map to FITS file: J1118-1232_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.357039 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000330294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.277528 0.277528 0.555055 1.11011 2.22022 4.44044 8.88088 17.7618 35.5235 71.0471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.357 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 7.911 at -8.852 degrees (North through East) ! Clean map min=-0.0022187 max=0.35704 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1118-1232_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:22:59 2017