! Started logfile: J1116+0829_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:25:15 2017 obs J1116+0829_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1116+0829_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1116+0829 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1116+0829_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906100Jy sigma=0.012763 ! Fit after self-cal, rms=0.885816Jy sigma=0.012519 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=5.789 mas, bpa=-3.215 degrees ! Estimated noise=993.287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924802 Jy ! Component: 100 - total flux cleaned = 0.115486 Jy ! Total flux subtracted in 100 components = 0.115486 Jy ! Clean residual min=-0.006855 max=0.009751 Jy/beam ! Clean residual mean=-0.000122 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.115487 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.115487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080033Jy sigma=0.000948 ! Fit after self-cal, rms=0.079897Jy sigma=0.000947 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=6.454 mas, bpa=-1.423 degrees ! Estimated noise=746.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145684 Jy ! Component: 100 - total flux cleaned = 0.0235458 Jy ! Component: 150 - total flux cleaned = 0.029722 Jy ! Component: 200 - total flux cleaned = 0.0343013 Jy ! Total flux subtracted in 200 components = 0.0343013 Jy ! Clean residual min=-0.004778 max=0.005087 Jy/beam ! Clean residual mean=-0.000067 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.149788 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 45 components and 0.149788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076187Jy sigma=0.000906 ! Fit after self-cal, rms=0.076262Jy sigma=0.000905 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 1.00 ! MK 1.04 NL 0.96 OV 1.00 PT 0.97 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.00 ! MK 1.03 NL 1.03 OV 1.01 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.78 ! MK 1.03 NL 1.02 OV 0.96 PT 0.96 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.89 ! MK 1.04 NL 1.07 OV 1.02 PT 0.97 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.076262Jy sigma=0.000905 ! Fit after self-cal, rms=0.076557Jy sigma=0.000891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=6.579 mas, bpa=-1.857 degrees ! Estimated noise=745.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436639 Jy ! Component: 100 - total flux cleaned = 0.000786888 Jy ! Component: 150 - total flux cleaned = 0.00101809 Jy ! Component: 200 - total flux cleaned = 0.00129984 Jy ! Total flux subtracted in 200 components = 0.00129984 Jy ! Clean residual min=-0.003523 max=0.002956 Jy/beam ! Clean residual mean=-0.000017 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.151088 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.151088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076273Jy sigma=0.000890 ! Fit after self-cal, rms=0.076299Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076299Jy sigma=0.000889 ! Fit after self-cal, rms=0.083272Jy sigma=0.000886 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=6.56 mas, bpa=-1.405 degrees ! Estimated noise=751.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241976 Jy ! Component: 100 - total flux cleaned = 0.000289549 Jy ! Component: 150 - total flux cleaned = 0.000331949 Jy ! Component: 200 - total flux cleaned = 0.000293257 Jy ! Total flux subtracted in 200 components = 0.000293257 Jy ! Clean residual min=-0.002567 max=0.002593 Jy/beam ! Clean residual mean=-0.000006 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.151381 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.151381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083198Jy sigma=0.000886 ! Fit after self-cal, rms=0.083271Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010566 Jy ! Component: 100 - total flux cleaned = 3.60616e-05 Jy ! Component: 150 - total flux cleaned = 3.9712e-06 Jy ! Component: 200 - total flux cleaned = -2.73118e-05 Jy ! Total flux subtracted in 200 components = -2.73118e-05 Jy ! Clean residual min=-0.002550 max=0.002599 Jy/beam ! Clean residual mean=-0.000006 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.151354 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.151354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083227Jy sigma=0.000885 ! Fit after self-cal, rms=0.083265Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083265Jy sigma=0.000885 ! Fit after self-cal, rms=0.083750Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=6.579 mas, bpa=-1.514 degrees ! Estimated noise=751.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475562 Jy ! Component: 100 - total flux cleaned = -0.000687172 Jy ! Component: 150 - total flux cleaned = -0.00078096 Jy ! Component: 200 - total flux cleaned = -0.000864992 Jy ! Total flux subtracted in 200 components = -0.000864992 Jy ! Clean residual min=-0.002513 max=0.002558 Jy/beam ! Clean residual mean=-0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.150489 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.150489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083707Jy sigma=0.000885 ! Fit after self-cal, rms=0.083751Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13768e-05 Jy ! Component: 100 - total flux cleaned = -9.19918e-05 Jy ! Component: 150 - total flux cleaned = -0.000165964 Jy ! Component: 200 - total flux cleaned = -0.00018933 Jy ! Total flux subtracted in 200 components = -0.00018933 Jy ! Clean residual min=-0.002495 max=0.002563 Jy/beam ! Clean residual mean=-0.000003 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.150299 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.150299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083725Jy sigma=0.000885 ! Fit after self-cal, rms=0.083753Jy sigma=0.000885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083753Jy sigma=0.000885 ! Fit after self-cal, rms=0.083963Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.651 mas, bmaj=10.9 mas, bpa=8.244 degrees ! Estimated noise=864.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518495 Jy ! Component: 100 - total flux cleaned = -0.000589476 Jy ! Component: 150 - total flux cleaned = -0.000630933 Jy ! Component: 200 - total flux cleaned = -0.000667236 Jy ! Total flux subtracted in 200 components = -0.000667236 Jy ! Clean residual min=-0.002287 max=0.002483 Jy/beam ! Clean residual mean=0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.149632 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.149632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083953Jy sigma=0.000884 ! Fit after self-cal, rms=0.083961Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.2896e-05 Jy ! Component: 100 - total flux cleaned = -7.30738e-05 Jy ! Component: 150 - total flux cleaned = -8.82483e-05 Jy ! Component: 200 - total flux cleaned = -0.000101501 Jy ! Total flux subtracted in 200 components = -0.000101501 Jy ! Clean residual min=-0.002201 max=0.002400 Jy/beam ! Clean residual mean=0.000001 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.149531 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.149531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083954Jy sigma=0.000884 ! Fit after self-cal, rms=0.083965Jy sigma=0.000884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.597 mas, bpa=-1.609 degrees ! Estimated noise=751.301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.597 at -1.609 degrees (North through East) ! Clean map min=-0.0028926 max=0.11318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=5.882 mas, bpa=-3.323 degrees ! Estimated noise=1015.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0943493 Jy ! Component: 100 - total flux cleaned = 0.116913 Jy ! Component: 150 - total flux cleaned = 0.126503 Jy ! Component: 200 - total flux cleaned = 0.132836 Jy ! Total flux subtracted in 200 components = 0.132836 Jy ! Clean residual min=-0.005001 max=0.005161 Jy/beam ! Clean residual mean=-0.000042 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.132836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.132836 Jy ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.597 mas, bpa=-1.609 degrees ! Estimated noise=751.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648619 Jy ! Component: 100 - total flux cleaned = 0.0105701 Jy ! Component: 150 - total flux cleaned = 0.0129101 Jy ! Component: 200 - total flux cleaned = 0.0138279 Jy ! Total flux subtracted in 200 components = 0.0138279 Jy ! Clean residual min=-0.002797 max=0.002909 Jy/beam ! Clean residual mean=-0.000012 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.146663 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.146663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.651 mas, bmaj=10.9 mas, bpa=8.244 degrees ! Estimated noise=864.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258482 Jy ! Component: 100 - total flux cleaned = 0.00284995 Jy ! Component: 150 - total flux cleaned = 0.00285314 Jy ! Component: 200 - total flux cleaned = 0.00280905 Jy ! Total flux subtracted in 200 components = 0.00280905 Jy ! Clean residual min=-0.002358 max=0.002713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.149473 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.09799e-05 Jy ! Component: 100 - total flux cleaned = 7.94576e-05 Jy ! Component: 150 - total flux cleaned = 0.000149805 Jy ! Component: 200 - total flux cleaned = 0.000183249 Jy ! Total flux subtracted in 200 components = 0.000183249 Jy ! Clean residual min=-0.002253 max=0.002569 Jy/beam ! Clean residual mean=0.000002 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.149656 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 0.149656 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.597 mas, bpa=-1.609 degrees ! Estimated noise=751.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107602 Jy ! Component: 100 - total flux cleaned = -0.00101043 Jy ! Component: 150 - total flux cleaned = -0.000778631 Jy ! Component: 200 - total flux cleaned = -0.000674917 Jy ! Total flux subtracted in 200 components = -0.000674917 Jy ! Clean residual min=-0.002415 max=0.002587 Jy/beam ! Clean residual mean=-0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.148981 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.148981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084150Jy sigma=0.000885 ! Fit after self-cal, rms=0.084021Jy sigma=0.000884 wmodel J1116+0829_S_2014_01_04_pus_map.mod ! Writing 106 model components to file: J1116+0829_S_2014_01_04_pus_map.mod wobs J1116+0829_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1116+0829_S_2014_01_04_pus_uvs.fits wwins J1116+0829_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1116+0829_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535741 Jy ! Component: 100 - total flux cleaned = 0.000785976 Jy ! Component: 150 - total flux cleaned = 0.000941398 Jy ! Component: 200 - total flux cleaned = 0.00116304 Jy ! Component: 250 - total flux cleaned = 0.00151656 Jy ! Component: 300 - total flux cleaned = 0.00179013 Jy ! Component: 350 - total flux cleaned = 0.00202175 Jy ! Component: 400 - total flux cleaned = 0.00208625 Jy ! Component: 450 - total flux cleaned = 0.00221209 Jy ! Component: 500 - total flux cleaned = 0.00233453 Jy ! Component: 550 - total flux cleaned = 0.0024536 Jy ! Component: 600 - total flux cleaned = 0.00251159 Jy ! Component: 650 - total flux cleaned = 0.00251106 Jy ! Component: 700 - total flux cleaned = 0.0025397 Jy ! Component: 750 - total flux cleaned = 0.00253994 Jy ! Component: 800 - total flux cleaned = 0.002676 Jy ! Component: 850 - total flux cleaned = 0.00267584 Jy ! Component: 900 - total flux cleaned = 0.00278153 Jy ! Component: 950 - total flux cleaned = 0.00285889 Jy ! Component: 1000 - total flux cleaned = 0.00283312 Jy ! Component: 1050 - total flux cleaned = 0.00290838 Jy ! Component: 1100 - total flux cleaned = 0.00288338 Jy ! Component: 1150 - total flux cleaned = 0.002835 Jy ! Component: 1200 - total flux cleaned = 0.00281158 Jy ! Component: 1250 - total flux cleaned = 0.00276479 Jy ! Component: 1300 - total flux cleaned = 0.00271838 Jy ! Component: 1350 - total flux cleaned = 0.00262655 Jy ! Component: 1400 - total flux cleaned = 0.00253604 Jy ! Component: 1450 - total flux cleaned = 0.00244631 Jy ! Component: 1500 - total flux cleaned = 0.00229193 Jy ! Component: 1550 - total flux cleaned = 0.00224817 Jy ! Component: 1600 - total flux cleaned = 0.00222657 Jy ! Component: 1650 - total flux cleaned = 0.0021414 Jy ! Component: 1700 - total flux cleaned = 0.00207808 Jy ! Component: 1750 - total flux cleaned = 0.00197398 Jy ! Component: 1800 - total flux cleaned = 0.00193281 Jy ! Component: 1850 - total flux cleaned = 0.00178999 Jy ! Component: 1900 - total flux cleaned = 0.00164874 Jy ! Component: 1950 - total flux cleaned = 0.00162839 Jy ! Component: 2000 - total flux cleaned = 0.00143057 Jy ! Component: 2050 - total flux cleaned = 0.00133297 Jy ! Component: 2100 - total flux cleaned = 0.00125547 Jy ! Component: 2150 - total flux cleaned = 0.00114025 Jy ! Component: 2200 - total flux cleaned = 0.00108327 Jy ! Component: 2250 - total flux cleaned = 0.000932329 Jy ! Component: 2300 - total flux cleaned = 0.000838664 Jy ! Component: 2350 - total flux cleaned = 0.000672018 Jy ! Component: 2400 - total flux cleaned = 0.000617141 Jy ! Component: 2450 - total flux cleaned = 0.000489613 Jy ! Component: 2500 - total flux cleaned = 0.000417267 Jy ! Component: 2550 - total flux cleaned = 0.000345804 Jy ! Component: 2600 - total flux cleaned = 0.000256826 Jy ! Component: 2650 - total flux cleaned = 0.000239118 Jy ! Component: 2700 - total flux cleaned = 0.00011674 Jy ! Component: 2750 - total flux cleaned = 9.95206e-05 Jy ! Component: 2800 - total flux cleaned = -3.83073e-05 Jy ! Component: 2850 - total flux cleaned = -8.96955e-05 Jy ! Component: 2900 - total flux cleaned = -0.000174815 Jy ! Component: 2950 - total flux cleaned = -0.000276087 Jy ! Component: 3000 - total flux cleaned = -0.000326457 Jy ! Component: 3050 - total flux cleaned = -0.000426199 Jy ! Component: 3100 - total flux cleaned = -0.000492264 Jy ! Component: 3150 - total flux cleaned = -0.000558031 Jy ! Component: 3200 - total flux cleaned = -0.000639653 Jy ! Component: 3250 - total flux cleaned = -0.000769448 Jy ! Component: 3300 - total flux cleaned = -0.000850108 Jy ! Component: 3350 - total flux cleaned = -0.000978368 Jy ! Component: 3400 - total flux cleaned = -0.00108996 Jy ! Component: 3450 - total flux cleaned = -0.00116926 Jy ! Component: 3500 - total flux cleaned = -0.00124818 Jy ! Component: 3550 - total flux cleaned = -0.00131112 Jy ! Component: 3600 - total flux cleaned = -0.00140503 Jy ! Component: 3650 - total flux cleaned = -0.00146733 Jy ! Component: 3700 - total flux cleaned = -0.0015294 Jy ! Component: 3750 - total flux cleaned = -0.00157577 Jy ! Component: 3800 - total flux cleaned = -0.00165285 Jy ! Component: 3850 - total flux cleaned = -0.00174499 Jy ! Component: 3900 - total flux cleaned = -0.00183681 Jy ! Component: 3950 - total flux cleaned = -0.00191297 Jy ! Component: 4000 - total flux cleaned = -0.00197373 Jy ! Component: 4050 - total flux cleaned = -0.00201923 Jy ! Total flux subtracted in 4096 components = -0.002125 Jy ! Clean residual min=-0.000809 max=0.000844 Jy/beam ! Clean residual mean=0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.146856 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 357 components and 0.146856 Jy ![Exited script file: muppet] wmap "J1116+0829_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.597 at -1.609 degrees (North through East) ! Clean map min=-0.0018706 max=0.11649 Jy/beam ! Writing clean map to FITS file: J1116+0829_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116492 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260968 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.672066 0.672066 1.34413 2.68826 5.37653 10.7531 21.5061 43.0122 86.0245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.597 at -1.609 degrees (North through East) ! Clean map min=-0.0018706 max=0.11649 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1116+0829_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:19 2017