! Started logfile: J1113+1442_X_2015_01_23_pus_uvs.log on Sun Jan 1 22:15:10 2017 obs J1113+1442_X_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1113+1442_X_2015_01_23_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.876628 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 350 lines of history. ! ! Reading 13728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1113+1442_X_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.749893Jy sigma=0.009194 ! Fit after self-cal, rms=0.747112Jy sigma=0.009160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7347 mas, bmaj=1.735 mas, bpa=-4.681 degrees ! Estimated noise=750.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.19416 Jy ! Component: 100 - total flux cleaned = 0.247743 Jy ! Total flux subtracted in 100 components = 0.247743 Jy ! Clean residual min=-0.012629 max=0.020908 Jy/beam ! Clean residual mean=0.000013 rms=0.002969 Jy/beam ! Combined flux in latest and established models = 0.247743 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.247743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090319Jy sigma=0.001018 ! Fit after self-cal, rms=0.090261Jy sigma=0.001017 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212064 Jy ! Component: 100 - total flux cleaned = 0.0305815 Jy ! Total flux subtracted in 100 components = 0.0305815 Jy ! Clean residual min=-0.012167 max=0.009802 Jy/beam ! Clean residual mean=0.000011 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.278324 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.278324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084259Jy sigma=0.000943 ! Fit after self-cal, rms=0.084223Jy sigma=0.000942 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=1.984 mas, bpa=-4.339 degrees ! Estimated noise=500.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087074 Jy ! Component: 100 - total flux cleaned = 0.0131589 Jy ! Component: 150 - total flux cleaned = 0.0157602 Jy ! Component: 200 - total flux cleaned = 0.017381 Jy ! Total flux subtracted in 200 components = 0.017381 Jy ! Clean residual min=-0.013675 max=0.011185 Jy/beam ! Clean residual mean=0.000043 rms=0.002813 Jy/beam ! Combined flux in latest and established models = 0.295705 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.295705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083153Jy sigma=0.000934 ! Fit after self-cal, rms=0.083124Jy sigma=0.000934 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.09 KP 0.90 ! LA 1.09 MK 0.95 NL 0.97 OV 0.97 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.12 KP 0.85 ! LA 1.11 MK 0.95 NL 0.98 OV 0.99 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 1.11 KP 0.80 ! LA 1.13 MK 0.97 NL 0.97 OV 0.98 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 1.12 KP 0.77 ! LA 1.15 MK 0.99 NL 0.99 OV 0.97 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 1.07 KP 0.72 ! LA 1.15 MK 1.00 NL 0.99 OV 0.99 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 1.09 KP 0.72 ! LA 1.14 MK 0.99 NL 1.01 OV 1.01 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.23 HN 1.27 KP 0.72 ! LA 1.17 MK 1.00 NL 1.06 OV 1.05 ! PT 1.00 SC 1.12 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.14 HN 1.19 KP 0.73 ! LA 1.13 MK 0.99 NL 0.99 OV 1.04 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 HN 1.17 KP 0.75 ! LA 1.16 MK 0.98 NL 0.99 OV 1.03 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.13 HN 1.13 KP 0.78 ! LA 1.17 MK 1.03 NL 1.01 OV 1.00 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.16 HN 1.20 KP 0.80 ! LA 1.16 MK 1.02 NL 1.00 OV 0.99 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.14 HN 1.12 KP 0.74 ! LA 1.13 MK 1.03 NL 1.00 OV 1.02 ! PT 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.083124Jy sigma=0.000934 ! Fit after self-cal, rms=0.071841Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.891 mas, bmaj=1.991 mas, bpa=-4.495 degrees ! Estimated noise=501.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466475 Jy ! Component: 100 - total flux cleaned = 0.00423861 Jy ! Component: 150 - total flux cleaned = 0.0043078 Jy ! Component: 200 - total flux cleaned = 0.00450474 Jy ! Total flux subtracted in 200 components = 0.00450474 Jy ! Clean residual min=-0.002478 max=0.003423 Jy/beam ! Clean residual mean=0.000014 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.30021 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.30021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071328Jy sigma=0.000783 ! Fit after self-cal, rms=0.071316Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071316Jy sigma=0.000781 ! Fit after self-cal, rms=0.071712Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8897 mas, bmaj=1.985 mas, bpa=-4.274 degrees ! Estimated noise=501.196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155324 Jy ! Component: 100 - total flux cleaned = 0.00227456 Jy ! Component: 150 - total flux cleaned = 0.00258594 Jy ! Component: 200 - total flux cleaned = 0.00284678 Jy ! Total flux subtracted in 200 components = 0.00284678 Jy ! Clean residual min=-0.001780 max=0.001961 Jy/beam ! Clean residual mean=0.000008 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.303057 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.303057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071624Jy sigma=0.000775 ! Fit after self-cal, rms=0.071618Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160266 Jy ! Component: 100 - total flux cleaned = 0.00242198 Jy ! Component: 150 - total flux cleaned = 0.0029989 Jy ! Component: 200 - total flux cleaned = 0.00333556 Jy ! Total flux subtracted in 200 components = 0.00333556 Jy ! Clean residual min=-0.001562 max=0.001335 Jy/beam ! Clean residual mean=0.000008 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.306392 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.306392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071558Jy sigma=0.000774 ! Fit after self-cal, rms=0.071554Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071554Jy sigma=0.000774 ! Fit after self-cal, rms=0.071573Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=1.986 mas, bpa=-4.305 degrees ! Estimated noise=500.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110735 Jy ! Component: 100 - total flux cleaned = 0.000415028 Jy ! Component: 150 - total flux cleaned = 0.000543348 Jy ! Component: 200 - total flux cleaned = 0.000614309 Jy ! Total flux subtracted in 200 components = 0.000614309 Jy ! Clean residual min=-0.001445 max=0.001246 Jy/beam ! Clean residual mean=0.000007 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.307006 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.307006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071548Jy sigma=0.000774 ! Fit after self-cal, rms=0.071545Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010663 Jy ! Component: 100 - total flux cleaned = 0.000235064 Jy ! Component: 150 - total flux cleaned = 0.000333576 Jy ! Component: 200 - total flux cleaned = 0.000426156 Jy ! Total flux subtracted in 200 components = 0.000426156 Jy ! Clean residual min=-0.001395 max=0.001236 Jy/beam ! Clean residual mean=0.000007 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.307433 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 86 components and 0.307433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071532Jy sigma=0.000774 ! Fit after self-cal, rms=0.071530Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071530Jy sigma=0.000774 ! Fit after self-cal, rms=0.071538Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.995 mas, bpa=1.559 degrees ! Estimated noise=615.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.49404e-05 Jy ! Component: 100 - total flux cleaned = 0.000177571 Jy ! Component: 150 - total flux cleaned = 0.000192064 Jy ! Component: 200 - total flux cleaned = 0.000214515 Jy ! Total flux subtracted in 200 components = 0.000214515 Jy ! Clean residual min=-0.001455 max=0.001445 Jy/beam ! Clean residual mean=0.000015 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.307647 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.307647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071535Jy sigma=0.000774 ! Fit after self-cal, rms=0.071534Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.37353e-05 Jy ! Component: 100 - total flux cleaned = 1.81447e-06 Jy ! Component: 150 - total flux cleaned = 3.2309e-05 Jy ! Component: 200 - total flux cleaned = 5.11512e-05 Jy ! Total flux subtracted in 200 components = 5.11512e-05 Jy ! Clean residual min=-0.001427 max=0.001407 Jy/beam ! Clean residual mean=0.000015 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.307698 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.307698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071534Jy sigma=0.000774 ! Fit after self-cal, rms=0.071533Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8904 mas, bmaj=1.987 mas, bpa=-4.345 degrees ! Estimated noise=500.354 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8904 x 1.987 at -4.345 degrees (North through East) ! Clean map min=-0.0012588 max=0.25116 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7388 mas, bmaj=1.736 mas, bpa=-4.499 degrees ! Estimated noise=755.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195038 Jy ! Component: 100 - total flux cleaned = 0.249812 Jy ! Component: 150 - total flux cleaned = 0.271101 Jy ! Component: 200 - total flux cleaned = 0.281403 Jy ! Total flux subtracted in 200 components = 0.281403 Jy ! Clean residual min=-0.003590 max=0.004944 Jy/beam ! Clean residual mean=0.000002 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.281403 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.281403 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8904 mas, bmaj=1.987 mas, bpa=-4.345 degrees ! Estimated noise=500.354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00729741 Jy ! Component: 100 - total flux cleaned = 0.0117541 Jy ! Component: 150 - total flux cleaned = 0.0148571 Jy ! Component: 200 - total flux cleaned = 0.0171917 Jy ! Total flux subtracted in 200 components = 0.0171917 Jy ! Clean residual min=-0.001789 max=0.001503 Jy/beam ! Clean residual mean=0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.298595 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.298595 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.995 mas, bpa=1.559 degrees ! Estimated noise=615.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267576 Jy ! Component: 100 - total flux cleaned = 0.00441653 Jy ! Component: 150 - total flux cleaned = 0.00566199 Jy ! Component: 200 - total flux cleaned = 0.00660664 Jy ! Total flux subtracted in 200 components = 0.00660664 Jy ! Clean residual min=-0.001565 max=0.001401 Jy/beam ! Clean residual mean=0.000014 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.305202 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739379 Jy ! Component: 100 - total flux cleaned = 0.00132376 Jy ! Component: 150 - total flux cleaned = 0.00176992 Jy ! Component: 200 - total flux cleaned = 0.00198483 Jy ! Total flux subtracted in 200 components = 0.00198483 Jy ! Clean residual min=-0.001451 max=0.001408 Jy/beam ! Clean residual mean=0.000015 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.307186 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 96 components and 0.307186 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8904 mas, bmaj=1.987 mas, bpa=-4.345 degrees ! Estimated noise=500.354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186677 Jy ! Component: 100 - total flux cleaned = 0.000212609 Jy ! Component: 150 - total flux cleaned = 0.000261815 Jy ! Component: 200 - total flux cleaned = 0.000375272 Jy ! Total flux subtracted in 200 components = 0.000375272 Jy ! Clean residual min=-0.001335 max=0.001238 Jy/beam ! Clean residual mean=0.000007 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.307562 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 112 components and 0.307562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071537Jy sigma=0.000774 ! Fit after self-cal, rms=0.071534Jy sigma=0.000774 wmodel J1113+1442_X_2015_01_23_pus_map.mod ! Writing 112 model components to file: J1113+1442_X_2015_01_23_pus_map.mod wobs J1113+1442_X_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1113+1442_X_2015_01_23_pus_uvs.fits wwins J1113+1442_X_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1113+1442_X_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423961 Jy ! Component: 100 - total flux cleaned = -0.00060582 Jy ! Component: 150 - total flux cleaned = -0.000692741 Jy ! Component: 200 - total flux cleaned = -0.000755118 Jy ! Component: 250 - total flux cleaned = -0.000835171 Jy ! Component: 300 - total flux cleaned = -0.000874309 Jy ! Component: 350 - total flux cleaned = -0.000931286 Jy ! Component: 400 - total flux cleaned = -0.000949624 Jy ! Component: 450 - total flux cleaned = -0.00100357 Jy ! Component: 500 - total flux cleaned = -0.0010917 Jy ! Component: 550 - total flux cleaned = -0.0011091 Jy ! Component: 600 - total flux cleaned = -0.00115965 Jy ! Component: 650 - total flux cleaned = -0.0011596 Jy ! Component: 700 - total flux cleaned = -0.00119237 Jy ! Component: 750 - total flux cleaned = -0.00122407 Jy ! Component: 800 - total flux cleaned = -0.00130174 Jy ! Component: 850 - total flux cleaned = -0.00136279 Jy ! Component: 900 - total flux cleaned = -0.00139253 Jy ! Component: 950 - total flux cleaned = -0.00143704 Jy ! Component: 1000 - total flux cleaned = -0.00146646 Jy ! Component: 1050 - total flux cleaned = -0.00149539 Jy ! Component: 1100 - total flux cleaned = -0.00156666 Jy ! Component: 1150 - total flux cleaned = -0.00158065 Jy ! Component: 1200 - total flux cleaned = -0.00162217 Jy ! Component: 1250 - total flux cleaned = -0.00160844 Jy ! Component: 1300 - total flux cleaned = -0.00162213 Jy ! Component: 1350 - total flux cleaned = -0.00163574 Jy ! Component: 1400 - total flux cleaned = -0.00170206 Jy ! Component: 1450 - total flux cleaned = -0.00172811 Jy ! Component: 1500 - total flux cleaned = -0.0017021 Jy ! Component: 1550 - total flux cleaned = -0.00171535 Jy ! Component: 1600 - total flux cleaned = -0.0017532 Jy ! Component: 1650 - total flux cleaned = -0.00177811 Jy ! Component: 1700 - total flux cleaned = -0.00177804 Jy ! Component: 1750 - total flux cleaned = -0.00177802 Jy ! Component: 1800 - total flux cleaned = -0.00181447 Jy ! Component: 1850 - total flux cleaned = -0.00186251 Jy ! Component: 1900 - total flux cleaned = -0.00187468 Jy ! Component: 1950 - total flux cleaned = -0.00189835 Jy ! Component: 2000 - total flux cleaned = -0.00201533 Jy ! Total flux subtracted in 2048 components = -0.00199192 Jy ! Clean residual min=-0.000600 max=0.000713 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.30557 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 247 components and 0.30557 Jy ![Exited script file: muppet] wmap "J1113+1442_X_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8904 x 1.987 at -4.345 degrees (North through East) ! Clean map min=-0.0010403 max=0.25164 Jy/beam ! Writing clean map to FITS file: J1113+1442_X_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.251638 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217919 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259801 0.259801 0.519602 1.0392 2.07841 4.15682 8.31363 16.6273 33.2545 66.509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8904 x 1.987 at -4.345 degrees (North through East) ! Clean map min=-0.0010403 max=0.25164 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_X_2015_01_23_pus_uvs.log closed on Sun Jan 1 22:15:11 2017