! Started logfile: J1113+1442_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:57:30 2016 obs J1113+1442_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.593651 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630143Jy sigma=0.008097 ! Fit after self-cal, rms=0.627196Jy sigma=0.008061 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=9.801 mas, bpa=-32.83 degrees ! Estimated noise=1676.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277173 Jy ! Component: 100 - total flux cleaned = 0.348141 Jy ! Total flux subtracted in 100 components = 0.348141 Jy ! Clean residual min=-0.021715 max=0.030365 Jy/beam ! Clean residual mean=-0.000354 rms=0.006690 Jy/beam ! Combined flux in latest and established models = 0.348141 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.348141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111677Jy sigma=0.001183 ! Fit after self-cal, rms=0.111634Jy sigma=0.001182 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=10.2 mas, bpa=-33.1 degrees ! Estimated noise=1504.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421089 Jy ! Component: 100 - total flux cleaned = 0.0655402 Jy ! Component: 150 - total flux cleaned = 0.0806459 Jy ! Component: 200 - total flux cleaned = 0.0913386 Jy ! Total flux subtracted in 200 components = 0.0913386 Jy ! Clean residual min=-0.016902 max=0.011819 Jy/beam ! Clean residual mean=-0.000301 rms=0.003708 Jy/beam ! Combined flux in latest and established models = 0.43948 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 71 components and 0.43948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089062Jy sigma=0.000976 ! Fit after self-cal, rms=0.088943Jy sigma=0.000975 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 1.00* KP 1.08 ! LA 0.97 MK 0.98 NL 0.83 OV 0.99 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 1.00* KP 1.07 ! LA 0.93 MK 1.01 NL 1.10 OV 1.01 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 1.00* KP 0.95 ! LA 0.77 MK 1.06 NL 1.46 OV 0.94 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.00* KP 0.91 ! LA 0.82 MK 1.03 NL 0.95 OV 0.99 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.088943Jy sigma=0.000975 ! Fit after self-cal, rms=0.066176Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.066 mas, bmaj=10.31 mas, bpa=-32.81 degrees ! Estimated noise=1503.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139536 Jy ! Component: 100 - total flux cleaned = -0.00174023 Jy ! Component: 150 - total flux cleaned = -0.00173867 Jy ! Component: 200 - total flux cleaned = -0.00167255 Jy ! Total flux subtracted in 200 components = -0.00167255 Jy ! Clean residual min=-0.006204 max=0.004439 Jy/beam ! Clean residual mean=-0.000054 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.437807 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.437807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065984Jy sigma=0.000770 ! Fit after self-cal, rms=0.065926Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065926Jy sigma=0.000769 ! Fit after self-cal, rms=0.065881Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.069 mas, bmaj=10.32 mas, bpa=-32.79 degrees ! Estimated noise=1503.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141327 Jy ! Component: 100 - total flux cleaned = -0.00147267 Jy ! Component: 150 - total flux cleaned = -0.00141795 Jy ! Component: 200 - total flux cleaned = -0.00136825 Jy ! Total flux subtracted in 200 components = -0.00136825 Jy ! Clean residual min=-0.005727 max=0.004042 Jy/beam ! Clean residual mean=-0.000053 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.436439 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.436439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065793Jy sigma=0.000768 ! Fit after self-cal, rms=0.065790Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.57332e-05 Jy ! Component: 100 - total flux cleaned = 0.000133125 Jy ! Component: 150 - total flux cleaned = 0.000172747 Jy ! Component: 200 - total flux cleaned = 0.000210223 Jy ! Total flux subtracted in 200 components = 0.000210223 Jy ! Clean residual min=-0.005437 max=0.003951 Jy/beam ! Clean residual mean=-0.000052 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.436649 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.436649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065745Jy sigma=0.000767 ! Fit after self-cal, rms=0.065743Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065743Jy sigma=0.000767 ! Fit after self-cal, rms=0.065730Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=10.31 mas, bpa=-32.76 degrees ! Estimated noise=1503.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108375 Jy ! Component: 100 - total flux cleaned = -0.00116586 Jy ! Component: 150 - total flux cleaned = -0.00116686 Jy ! Component: 200 - total flux cleaned = -0.00113368 Jy ! Total flux subtracted in 200 components = -0.00113368 Jy ! Clean residual min=-0.005039 max=0.003853 Jy/beam ! Clean residual mean=-0.000052 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.435516 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.435516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065685Jy sigma=0.000766 ! Fit after self-cal, rms=0.065683Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40278e-05 Jy ! Component: 100 - total flux cleaned = 3.83717e-05 Jy ! Component: 150 - total flux cleaned = 6.80803e-05 Jy ! Component: 200 - total flux cleaned = 9.63614e-05 Jy ! Total flux subtracted in 200 components = 9.63614e-05 Jy ! Clean residual min=-0.004850 max=0.003854 Jy/beam ! Clean residual mean=-0.000051 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.435612 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.435612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065658Jy sigma=0.000766 ! Fit after self-cal, rms=0.065656Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065656Jy sigma=0.000766 ! Fit after self-cal, rms=0.065655Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.99 mas, bmaj=11.48 mas, bpa=7.701 degrees ! Estimated noise=1831.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322091 Jy ! Component: 100 - total flux cleaned = -0.000210327 Jy ! Component: 150 - total flux cleaned = -0.000240201 Jy ! Component: 200 - total flux cleaned = -0.000212835 Jy ! Total flux subtracted in 200 components = -0.000212835 Jy ! Clean residual min=-0.005025 max=0.004641 Jy/beam ! Clean residual mean=-0.000082 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.435399 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.435399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065634Jy sigma=0.000766 ! Fit after self-cal, rms=0.065626Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011381 Jy ! Component: 100 - total flux cleaned = -1.76298e-05 Jy ! Component: 150 - total flux cleaned = -1.70937e-05 Jy ! Component: 200 - total flux cleaned = 4.76589e-06 Jy ! Total flux subtracted in 200 components = 4.76589e-06 Jy ! Clean residual min=-0.004843 max=0.004736 Jy/beam ! Clean residual mean=-0.000081 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.435404 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 112 components and 0.435404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065620Jy sigma=0.000765 ! Fit after self-cal, rms=0.065616Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=10.31 mas, bpa=-32.74 degrees ! Estimated noise=1503.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.075 x 10.31 at -32.74 degrees (North through East) ! Clean map min=-0.0044473 max=0.34655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=9.935 mas, bpa=-32.42 degrees ! Estimated noise=1685.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278598 Jy ! Component: 100 - total flux cleaned = 0.346767 Jy ! Component: 150 - total flux cleaned = 0.376105 Jy ! Component: 200 - total flux cleaned = 0.39222 Jy ! Total flux subtracted in 200 components = 0.39222 Jy ! Clean residual min=-0.007061 max=0.009706 Jy/beam ! Clean residual mean=-0.000117 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.39222 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.39222 Jy ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=10.31 mas, bpa=-32.74 degrees ! Estimated noise=1503.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142661 Jy ! Component: 100 - total flux cleaned = 0.0231562 Jy ! Component: 150 - total flux cleaned = 0.0290087 Jy ! Component: 200 - total flux cleaned = 0.0329636 Jy ! Total flux subtracted in 200 components = 0.0329636 Jy ! Clean residual min=-0.004977 max=0.004979 Jy/beam ! Clean residual mean=-0.000085 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.425184 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 68 components and 0.425184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.99 mas, bmaj=11.48 mas, bpa=7.701 degrees ! Estimated noise=1831.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427671 Jy ! Component: 100 - total flux cleaned = 0.00668548 Jy ! Component: 150 - total flux cleaned = 0.00752742 Jy ! Component: 200 - total flux cleaned = 0.00790659 Jy ! Total flux subtracted in 200 components = 0.00790659 Jy ! Clean residual min=-0.005002 max=0.004885 Jy/beam ! Clean residual mean=-0.000095 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.433091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294379 Jy ! Component: 100 - total flux cleaned = 0.000566146 Jy ! Component: 150 - total flux cleaned = 0.000814729 Jy ! Component: 200 - total flux cleaned = 0.00104527 Jy ! Total flux subtracted in 200 components = 0.00104527 Jy ! Clean residual min=-0.004924 max=0.004592 Jy/beam ! Clean residual mean=-0.000089 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.434136 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.434136 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=10.31 mas, bpa=-32.74 degrees ! Estimated noise=1503.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157848 Jy ! Component: 100 - total flux cleaned = -6.58475e-05 Jy ! Component: 150 - total flux cleaned = 5.83189e-05 Jy ! Component: 200 - total flux cleaned = 0.000174759 Jy ! Total flux subtracted in 200 components = 0.000174759 Jy ! Clean residual min=-0.004331 max=0.003926 Jy/beam ! Clean residual mean=-0.000051 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.434311 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.434311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065678Jy sigma=0.000766 ! Fit after self-cal, rms=0.065673Jy sigma=0.000766 wmodel J1113+1442_S_2015_03_17_pus_map.mod ! Writing 90 model components to file: J1113+1442_S_2015_03_17_pus_map.mod wobs J1113+1442_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2015_03_17_pus_uvs.fits wwins J1113+1442_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J1113+1442_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000955403 Jy ! Component: 100 - total flux cleaned = -0.00114765 Jy ! Component: 150 - total flux cleaned = -0.0014419 Jy ! Component: 200 - total flux cleaned = -0.00138562 Jy ! Component: 250 - total flux cleaned = -0.00133595 Jy ! Component: 300 - total flux cleaned = -0.00133627 Jy ! Component: 350 - total flux cleaned = -0.00124711 Jy ! Component: 400 - total flux cleaned = -0.00124753 Jy ! Component: 450 - total flux cleaned = -0.00108289 Jy ! Component: 500 - total flux cleaned = -0.00100413 Jy ! Component: 550 - total flux cleaned = -0.000851974 Jy ! Component: 600 - total flux cleaned = -0.00103436 Jy ! Component: 650 - total flux cleaned = -0.00103329 Jy ! Component: 700 - total flux cleaned = -0.00113635 Jy ! Component: 750 - total flux cleaned = -0.00113586 Jy ! Component: 800 - total flux cleaned = -0.00116784 Jy ! Component: 850 - total flux cleaned = -0.0011674 Jy ! Component: 900 - total flux cleaned = -0.00110594 Jy ! Component: 950 - total flux cleaned = -0.00101694 Jy ! Component: 1000 - total flux cleaned = -0.000929977 Jy ! Component: 1050 - total flux cleaned = -0.000873368 Jy ! Component: 1100 - total flux cleaned = -0.000790478 Jy ! Component: 1150 - total flux cleaned = -0.00065613 Jy ! Component: 1200 - total flux cleaned = -0.000603797 Jy ! Component: 1250 - total flux cleaned = -0.000577825 Jy ! Component: 1300 - total flux cleaned = -0.000527326 Jy ! Component: 1350 - total flux cleaned = -0.000453265 Jy ! Component: 1400 - total flux cleaned = -0.000428998 Jy ! Component: 1450 - total flux cleaned = -0.000428798 Jy ! Component: 1500 - total flux cleaned = -0.000381108 Jy ! Component: 1550 - total flux cleaned = -0.00033449 Jy ! Component: 1600 - total flux cleaned = -0.000311233 Jy ! Component: 1650 - total flux cleaned = -0.00033413 Jy ! Component: 1700 - total flux cleaned = -0.000334073 Jy ! Component: 1750 - total flux cleaned = -0.000311858 Jy ! Component: 1800 - total flux cleaned = -0.000246456 Jy ! Component: 1850 - total flux cleaned = -0.000181833 Jy ! Component: 1900 - total flux cleaned = -0.000117839 Jy ! Component: 1950 - total flux cleaned = -5.46497e-05 Jy ! Component: 2000 - total flux cleaned = -3.36474e-05 Jy ! Component: 2050 - total flux cleaned = 2.82142e-05 Jy ! Component: 2100 - total flux cleaned = 2.81522e-05 Jy ! Component: 2150 - total flux cleaned = 0.000108977 Jy ! Component: 2200 - total flux cleaned = 0.000149006 Jy ! Component: 2250 - total flux cleaned = 0.000168842 Jy ! Component: 2300 - total flux cleaned = 0.00020842 Jy ! Component: 2350 - total flux cleaned = 0.000267401 Jy ! Component: 2400 - total flux cleaned = 0.000306421 Jy ! Component: 2450 - total flux cleaned = 0.000403291 Jy ! Component: 2500 - total flux cleaned = 0.000480152 Jy ! Component: 2550 - total flux cleaned = 0.000441895 Jy ! Component: 2600 - total flux cleaned = 0.000518179 Jy ! Component: 2650 - total flux cleaned = 0.00055597 Jy ! Component: 2700 - total flux cleaned = 0.000612364 Jy ! Component: 2750 - total flux cleaned = 0.000687284 Jy ! Component: 2800 - total flux cleaned = 0.000706077 Jy ! Component: 2850 - total flux cleaned = 0.000780408 Jy ! Component: 2900 - total flux cleaned = 0.000780282 Jy ! Component: 2950 - total flux cleaned = 0.000817223 Jy ! Component: 3000 - total flux cleaned = 0.000817182 Jy ! Component: 3050 - total flux cleaned = 0.000890367 Jy ! Component: 3100 - total flux cleaned = 0.000890328 Jy ! Component: 3150 - total flux cleaned = 0.000872126 Jy ! Component: 3200 - total flux cleaned = 0.000908444 Jy ! Component: 3250 - total flux cleaned = 0.000944714 Jy ! Component: 3300 - total flux cleaned = 0.000926677 Jy ! Component: 3350 - total flux cleaned = 0.000944727 Jy ! Component: 3400 - total flux cleaned = 0.000998838 Jy ! Component: 3450 - total flux cleaned = 0.00105283 Jy ! Component: 3500 - total flux cleaned = 0.00114291 Jy ! Component: 3550 - total flux cleaned = 0.00128691 Jy ! Component: 3600 - total flux cleaned = 0.00132285 Jy ! Component: 3650 - total flux cleaned = 0.00139487 Jy ! Component: 3700 - total flux cleaned = 0.0014668 Jy ! Component: 3750 - total flux cleaned = 0.00157467 Jy ! Component: 3800 - total flux cleaned = 0.00162864 Jy ! Component: 3850 - total flux cleaned = 0.00168266 Jy ! Component: 3900 - total flux cleaned = 0.00175461 Jy ! Component: 3950 - total flux cleaned = 0.00184459 Jy ! Component: 4000 - total flux cleaned = 0.00189866 Jy ! Component: 4050 - total flux cleaned = 0.00198877 Jy ! Total flux subtracted in 4096 components = 0.00206085 Jy ! Clean residual min=-0.001039 max=0.001134 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.436371 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 381 components and 0.436371 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.075 x 10.31 at -32.74 degrees (North through East) ! Clean map min=-0.0020509 max=0.35287 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352875 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000295653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.251353 0.251353 0.502705 1.00541 2.01082 4.02164 8.04328 16.0866 32.1731 64.3463 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.352 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.075 x 10.31 at -32.74 degrees (North through East) ! Clean map min=-0.0020509 max=0.35287 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:57:34 2016