! Started logfile: J1113+1442_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:14 2017 obs J1113+1442_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.670158Jy sigma=0.007702 ! Fit after self-cal, rms=0.666835Jy sigma=0.007667 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=10.9 mas, bpa=-37.16 degrees ! Estimated noise=2193.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257516 Jy ! Component: 100 - total flux cleaned = 0.31535 Jy ! Total flux subtracted in 100 components = 0.31535 Jy ! Clean residual min=-0.023758 max=0.028833 Jy/beam ! Clean residual mean=-0.000066 rms=0.007074 Jy/beam ! Combined flux in latest and established models = 0.31535 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.31535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103355Jy sigma=0.001115 ! Fit after self-cal, rms=0.103340Jy sigma=0.001115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=10.91 mas, bpa=-37.69 degrees ! Estimated noise=1510.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260516 Jy ! Component: 100 - total flux cleaned = 0.0410705 Jy ! Component: 150 - total flux cleaned = 0.0506438 Jy ! Component: 200 - total flux cleaned = 0.0558522 Jy ! Total flux subtracted in 200 components = 0.0558522 Jy ! Clean residual min=-0.013789 max=0.022118 Jy/beam ! Clean residual mean=0.000118 rms=0.004544 Jy/beam ! Combined flux in latest and established models = 0.371202 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 0.371202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096383Jy sigma=0.001029 ! Fit after self-cal, rms=0.096376Jy sigma=0.001029 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.92 KP 1.07 ! LA 1.24 MK 0.99 NL 0.95 OV 0.93 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 0.96 ! LA 1.19 MK 1.00 NL 1.01 OV 0.96 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.96 KP 0.86 ! LA 0.94 MK 1.04 NL 1.78 OV 0.88 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.95 KP 0.79 ! LA 1.04 MK 1.03 NL 0.93 OV 0.93 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.096376Jy sigma=0.001029 ! Fit after self-cal, rms=0.078607Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=10.8 mas, bpa=-37.69 degrees ! Estimated noise=1497.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00088308 Jy ! Component: 100 - total flux cleaned = -0.00244119 Jy ! Component: 150 - total flux cleaned = -0.00346105 Jy ! Component: 200 - total flux cleaned = -0.00373655 Jy ! Total flux subtracted in 200 components = -0.00373655 Jy ! Clean residual min=-0.005204 max=0.004921 Jy/beam ! Clean residual mean=-0.000035 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.367466 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.367466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078218Jy sigma=0.000785 ! Fit after self-cal, rms=0.078314Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078314Jy sigma=0.000784 ! Fit after self-cal, rms=0.078312Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.975 mas, bmaj=10.77 mas, bpa=-37.67 degrees ! Estimated noise=1495.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264185 Jy ! Component: 100 - total flux cleaned = -0.00338098 Jy ! Component: 150 - total flux cleaned = -0.00369969 Jy ! Component: 200 - total flux cleaned = -0.00386673 Jy ! Total flux subtracted in 200 components = -0.00386673 Jy ! Clean residual min=-0.004719 max=0.004743 Jy/beam ! Clean residual mean=-0.000040 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.363599 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.363599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078181Jy sigma=0.000781 ! Fit after self-cal, rms=0.078191Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002227 Jy ! Component: 100 - total flux cleaned = -0.000392077 Jy ! Component: 150 - total flux cleaned = -0.000544676 Jy ! Component: 200 - total flux cleaned = -0.000628275 Jy ! Total flux subtracted in 200 components = -0.000628275 Jy ! Clean residual min=-0.004648 max=0.004808 Jy/beam ! Clean residual mean=-0.000042 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.362971 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.362971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078158Jy sigma=0.000781 ! Fit after self-cal, rms=0.078160Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078160Jy sigma=0.000781 ! Fit after self-cal, rms=0.078209Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.984 mas, bmaj=10.75 mas, bpa=-37.64 degrees ! Estimated noise=1494.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196733 Jy ! Component: 100 - total flux cleaned = -0.00258072 Jy ! Component: 150 - total flux cleaned = -0.00270419 Jy ! Component: 200 - total flux cleaned = -0.00278688 Jy ! Total flux subtracted in 200 components = -0.00278688 Jy ! Clean residual min=-0.004293 max=0.004693 Jy/beam ! Clean residual mean=-0.000042 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.360184 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.360184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078158Jy sigma=0.000780 ! Fit after self-cal, rms=0.078168Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.13392e-05 Jy ! Component: 100 - total flux cleaned = -0.000185914 Jy ! Component: 150 - total flux cleaned = -0.000268735 Jy ! Component: 200 - total flux cleaned = -0.000326421 Jy ! Total flux subtracted in 200 components = -0.000326421 Jy ! Clean residual min=-0.004271 max=0.004711 Jy/beam ! Clean residual mean=-0.000043 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.359857 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.359857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078153Jy sigma=0.000780 ! Fit after self-cal, rms=0.078154Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078154Jy sigma=0.000780 ! Fit after self-cal, rms=0.078238Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.98 mas, bmaj=10.84 mas, bpa=-42.7 degrees ! Estimated noise=1788.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126754 Jy ! Component: 100 - total flux cleaned = -0.00174829 Jy ! Component: 150 - total flux cleaned = -0.00176884 Jy ! Component: 200 - total flux cleaned = -0.00182686 Jy ! Total flux subtracted in 200 components = -0.00182686 Jy ! Clean residual min=-0.004434 max=0.004810 Jy/beam ! Clean residual mean=-0.000075 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.35803 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.35803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078222Jy sigma=0.000779 ! Fit after self-cal, rms=0.078230Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135262 Jy ! Component: 100 - total flux cleaned = -0.000152274 Jy ! Component: 150 - total flux cleaned = -0.000184226 Jy ! Component: 200 - total flux cleaned = -0.000214378 Jy ! Total flux subtracted in 200 components = -0.000214378 Jy ! Clean residual min=-0.004494 max=0.004844 Jy/beam ! Clean residual mean=-0.000076 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.357816 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.357816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078225Jy sigma=0.000779 ! Fit after self-cal, rms=0.078225Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=10.74 mas, bpa=-37.61 degrees ! Estimated noise=1493.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 10.74 at -37.61 degrees (North through East) ! Clean map min=-0.0039809 max=0.33286 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=10.64 mas, bpa=-37 degrees ! Estimated noise=2195.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257701 Jy ! Component: 100 - total flux cleaned = 0.314142 Jy ! Component: 150 - total flux cleaned = 0.332254 Jy ! Component: 200 - total flux cleaned = 0.34297 Jy ! Total flux subtracted in 200 components = 0.34297 Jy ! Clean residual min=-0.005637 max=0.007536 Jy/beam ! Clean residual mean=-0.000053 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.34297 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.34297 Jy ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=10.74 mas, bpa=-37.61 degrees ! Estimated noise=1493.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (32, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819735 Jy ! Component: 100 - total flux cleaned = 0.0131959 Jy ! Component: 150 - total flux cleaned = 0.0163834 Jy ! Component: 200 - total flux cleaned = 0.0178034 Jy ! Total flux subtracted in 200 components = 0.0178034 Jy ! Clean residual min=-0.004543 max=0.003465 Jy/beam ! Clean residual mean=-0.000033 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.360774 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 0.360774 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.98 mas, bmaj=10.84 mas, bpa=-42.7 degrees ! Estimated noise=1788.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111501 Jy ! Component: 100 - total flux cleaned = 0.00213743 Jy ! Component: 150 - total flux cleaned = 0.0028221 Jy ! Component: 200 - total flux cleaned = 0.00322168 Jy ! Total flux subtracted in 200 components = 0.00322168 Jy ! Clean residual min=-0.004600 max=0.003388 Jy/beam ! Clean residual mean=-0.000039 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.363995 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208828 Jy ! Component: 100 - total flux cleaned = 0.000354316 Jy ! Component: 150 - total flux cleaned = 0.000451531 Jy ! Component: 200 - total flux cleaned = 0.000543886 Jy ! Total flux subtracted in 200 components = 0.000543886 Jy ! Clean residual min=-0.004582 max=0.003317 Jy/beam ! Clean residual mean=-0.000035 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.364539 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 98 components and 0.364539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=10.74 mas, bpa=-37.61 degrees ! Estimated noise=1493.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158082 Jy ! Component: 100 - total flux cleaned = 0.000199453 Jy ! Component: 150 - total flux cleaned = 0.000136714 Jy ! Component: 200 - total flux cleaned = 0.000164938 Jy ! Total flux subtracted in 200 components = 0.000164938 Jy ! Clean residual min=-0.003711 max=0.003166 Jy/beam ! Clean residual mean=-0.000019 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.364704 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.364704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077988Jy sigma=0.000777 ! Fit after self-cal, rms=0.077961Jy sigma=0.000777 wmodel J1113+1442_S_2015_01_22_pus_map.mod ! Writing 123 model components to file: J1113+1442_S_2015_01_22_pus_map.mod wobs J1113+1442_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2015_01_22_pus_uvs.fits wwins J1113+1442_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1113+1442_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122213 Jy ! Component: 100 - total flux cleaned = -0.00211799 Jy ! Component: 150 - total flux cleaned = -0.00283846 Jy ! Component: 200 - total flux cleaned = -0.00317891 Jy ! Component: 250 - total flux cleaned = -0.00340714 Jy ! Component: 300 - total flux cleaned = -0.00366915 Jy ! Component: 350 - total flux cleaned = -0.00379508 Jy ! Component: 400 - total flux cleaned = -0.00395424 Jy ! Component: 450 - total flux cleaned = -0.00395478 Jy ! Component: 500 - total flux cleaned = -0.00373536 Jy ! Component: 550 - total flux cleaned = -0.00359519 Jy ! Component: 600 - total flux cleaned = -0.00345933 Jy ! Component: 650 - total flux cleaned = -0.00326309 Jy ! Component: 700 - total flux cleaned = -0.00313694 Jy ! Component: 750 - total flux cleaned = -0.00301374 Jy ! Component: 800 - total flux cleaned = -0.00295383 Jy ! Component: 850 - total flux cleaned = -0.00286592 Jy ! Component: 900 - total flux cleaned = -0.00269662 Jy ! Component: 950 - total flux cleaned = -0.00258677 Jy ! Component: 1000 - total flux cleaned = -0.00242545 Jy ! Component: 1050 - total flux cleaned = -0.00234683 Jy ! Component: 1100 - total flux cleaned = -0.00232148 Jy ! Component: 1150 - total flux cleaned = -0.00239724 Jy ! Component: 1200 - total flux cleaned = -0.00242185 Jy ! Component: 1250 - total flux cleaned = -0.00242209 Jy ! Component: 1300 - total flux cleaned = -0.00244651 Jy ! Component: 1350 - total flux cleaned = -0.00254083 Jy ! Component: 1400 - total flux cleaned = -0.00261021 Jy ! Component: 1450 - total flux cleaned = -0.00267823 Jy ! Component: 1500 - total flux cleaned = -0.00265564 Jy ! Component: 1550 - total flux cleaned = -0.00269995 Jy ! Component: 1600 - total flux cleaned = -0.0027219 Jy ! Component: 1650 - total flux cleaned = -0.00280821 Jy ! Component: 1700 - total flux cleaned = -0.00280864 Jy ! Component: 1750 - total flux cleaned = -0.00289262 Jy ! Component: 1800 - total flux cleaned = -0.00293389 Jy ! Component: 1850 - total flux cleaned = -0.00297474 Jy ! Component: 1900 - total flux cleaned = -0.00297458 Jy ! Component: 1950 - total flux cleaned = -0.0029946 Jy ! Component: 2000 - total flux cleaned = -0.00305343 Jy ! Component: 2050 - total flux cleaned = -0.00301446 Jy ! Component: 2100 - total flux cleaned = -0.00307212 Jy ! Component: 2150 - total flux cleaned = -0.00312949 Jy ! Component: 2200 - total flux cleaned = -0.00320519 Jy ! Component: 2250 - total flux cleaned = -0.00324282 Jy ! Component: 2300 - total flux cleaned = -0.0033358 Jy ! Component: 2350 - total flux cleaned = -0.00335426 Jy ! Component: 2400 - total flux cleaned = -0.00342763 Jy ! Component: 2450 - total flux cleaned = -0.0034641 Jy ! Component: 2500 - total flux cleaned = -0.00350031 Jy ! Component: 2550 - total flux cleaned = -0.00360819 Jy ! Component: 2600 - total flux cleaned = -0.00362602 Jy ! Component: 2650 - total flux cleaned = -0.00366152 Jy ! Component: 2700 - total flux cleaned = -0.00369682 Jy ! Component: 2750 - total flux cleaned = -0.00376705 Jy ! Component: 2800 - total flux cleaned = -0.00385421 Jy ! Component: 2850 - total flux cleaned = -0.00381954 Jy ! Component: 2900 - total flux cleaned = -0.00388882 Jy ! Component: 2950 - total flux cleaned = -0.00390603 Jy ! Component: 3000 - total flux cleaned = -0.00392313 Jy ! Component: 3050 - total flux cleaned = -0.00395719 Jy ! Component: 3100 - total flux cleaned = -0.00397399 Jy ! Component: 3150 - total flux cleaned = -0.00397397 Jy ! Component: 3200 - total flux cleaned = -0.00399079 Jy ! Component: 3250 - total flux cleaned = -0.00395721 Jy ! Component: 3300 - total flux cleaned = -0.00394052 Jy ! Component: 3350 - total flux cleaned = -0.00390707 Jy ! Component: 3400 - total flux cleaned = -0.00387363 Jy ! Component: 3450 - total flux cleaned = -0.00384028 Jy ! Component: 3500 - total flux cleaned = -0.00379028 Jy ! Component: 3550 - total flux cleaned = -0.00379028 Jy ! Component: 3600 - total flux cleaned = -0.00377359 Jy ! Component: 3650 - total flux cleaned = -0.00372374 Jy ! Component: 3700 - total flux cleaned = -0.00369052 Jy ! Component: 3750 - total flux cleaned = -0.00367385 Jy ! Component: 3800 - total flux cleaned = -0.00364073 Jy ! Component: 3850 - total flux cleaned = -0.00362418 Jy ! Component: 3900 - total flux cleaned = -0.00357442 Jy ! Component: 3950 - total flux cleaned = -0.00352467 Jy ! Component: 4000 - total flux cleaned = -0.00350814 Jy ! Component: 4050 - total flux cleaned = -0.003475 Jy ! Total flux subtracted in 4096 components = -0.00349154 Jy ! Clean residual min=-0.000915 max=0.001050 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.361213 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 387 components and 0.361212 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 10.74 at -37.61 degrees (North through East) ! Clean map min=-0.0023073 max=0.33107 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.33107 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.285626 0.285626 0.571252 1.1425 2.28501 4.57002 9.14003 18.2801 36.5601 73.1202 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.331 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 10.74 at -37.61 degrees (North through East) ! Clean map min=-0.0023073 max=0.33107 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:21 2017