! Started logfile: J1112+3503_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:08 2017 obs J1112+3503_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1112+3503_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1112+3503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1112+3503_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947066Jy sigma=0.011522 ! Fit after self-cal, rms=0.916374Jy sigma=0.011159 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=10.69 mas, bpa=-52.63 degrees ! Estimated noise=1400.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0693467 Jy ! Component: 100 - total flux cleaned = 0.0845164 Jy ! Total flux subtracted in 100 components = 0.0845164 Jy ! Clean residual min=-0.006229 max=0.009683 Jy/beam ! Clean residual mean=-0.000038 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.0845164 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0845164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070686Jy sigma=0.000799 ! Fit after self-cal, rms=0.070647Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=10.44 mas, bpa=-54.41 degrees ! Estimated noise=699.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307721 Jy ! Component: 100 - total flux cleaned = 0.00308062 Jy ! Component: 150 - total flux cleaned = 0.00282246 Jy ! Component: 200 - total flux cleaned = 0.00270174 Jy ! Total flux subtracted in 200 components = 0.00270174 Jy ! Clean residual min=-0.005783 max=0.010353 Jy/beam ! Clean residual mean=-0.000069 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.0872181 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.0872181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070199Jy sigma=0.000791 ! Fit after self-cal, rms=0.070203Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.93 KP 1.00 ! LA 1.84 MK 0.99 NL 0.95 OV 0.87 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.95 KP 0.87 ! LA 1.97 MK 1.05 NL 1.05 OV 0.94 ! PT 0.93 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.98 KP 0.83 ! LA 1.64 MK 1.03 NL 1.24 OV 0.86 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.94 KP 0.75 ! LA 1.60 MK 1.01 NL 0.89 OV 0.94 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.070203Jy sigma=0.000791 ! Fit after self-cal, rms=0.082463Jy sigma=0.000754 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.22 mas, bpa=-54.89 degrees ! Estimated noise=688.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138218 Jy ! Component: 100 - total flux cleaned = 0.00190955 Jy ! Component: 150 - total flux cleaned = 0.00219828 Jy ! Component: 200 - total flux cleaned = 0.00239507 Jy ! Total flux subtracted in 200 components = 0.00239507 Jy ! Clean residual min=-0.001868 max=0.001656 Jy/beam ! Clean residual mean=-0.000010 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0896132 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.0896132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082436Jy sigma=0.000754 ! Fit after self-cal, rms=0.082848Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082848Jy sigma=0.000753 ! Fit after self-cal, rms=0.084324Jy sigma=0.000753 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.2 mas, bpa=-54.96 degrees ! Estimated noise=689.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821704 Jy ! Component: 100 - total flux cleaned = 0.00128298 Jy ! Component: 150 - total flux cleaned = 0.00149488 Jy ! Component: 200 - total flux cleaned = 0.00165853 Jy ! Total flux subtracted in 200 components = 0.00165853 Jy ! Clean residual min=-0.001739 max=0.001544 Jy/beam ! Clean residual mean=-0.000009 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0912717 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.0912717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084312Jy sigma=0.000753 ! Fit after self-cal, rms=0.084328Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271141 Jy ! Component: 100 - total flux cleaned = 0.00039498 Jy ! Component: 150 - total flux cleaned = 0.000414473 Jy ! Component: 200 - total flux cleaned = 0.000441103 Jy ! Total flux subtracted in 200 components = 0.000441103 Jy ! Clean residual min=-0.001704 max=0.001547 Jy/beam ! Clean residual mean=-0.000009 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0917128 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.0917128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084324Jy sigma=0.000753 ! Fit after self-cal, rms=0.084327Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084327Jy sigma=0.000753 ! Fit after self-cal, rms=0.084568Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=10.2 mas, bpa=-55 degrees ! Estimated noise=689.616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444808 Jy ! Component: 100 - total flux cleaned = 0.000702282 Jy ! Component: 150 - total flux cleaned = 0.00077157 Jy ! Component: 200 - total flux cleaned = 0.000824381 Jy ! Total flux subtracted in 200 components = 0.000824381 Jy ! Clean residual min=-0.001668 max=0.001425 Jy/beam ! Clean residual mean=-0.000008 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0925372 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.0925372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084564Jy sigma=0.000753 ! Fit after self-cal, rms=0.084564Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46196e-05 Jy ! Component: 100 - total flux cleaned = 8.55034e-05 Jy ! Component: 150 - total flux cleaned = 0.000114821 Jy ! Component: 200 - total flux cleaned = 0.000148648 Jy ! Total flux subtracted in 200 components = 0.000148648 Jy ! Clean residual min=-0.001654 max=0.001444 Jy/beam ! Clean residual mean=-0.000008 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0926858 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0926858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084562Jy sigma=0.000753 ! Fit after self-cal, rms=0.084563Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084563Jy sigma=0.000753 ! Fit after self-cal, rms=0.084654Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=11.18 mas, bpa=-75.33 degrees ! Estimated noise=854.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326552 Jy ! Component: 100 - total flux cleaned = 0.00052805 Jy ! Component: 150 - total flux cleaned = 0.000575749 Jy ! Component: 200 - total flux cleaned = 0.000616663 Jy ! Total flux subtracted in 200 components = 0.000616663 Jy ! Clean residual min=-0.001580 max=0.001729 Jy/beam ! Clean residual mean=-0.000013 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0933025 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.0933025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084652Jy sigma=0.000753 ! Fit after self-cal, rms=0.084652Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12805e-05 Jy ! Component: 100 - total flux cleaned = 5.38024e-05 Jy ! Component: 150 - total flux cleaned = 7.81463e-05 Jy ! Component: 200 - total flux cleaned = 9.67214e-05 Jy ! Total flux subtracted in 200 components = 9.67214e-05 Jy ! Clean residual min=-0.001570 max=0.001733 Jy/beam ! Clean residual mean=-0.000013 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0933992 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.0933992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084651Jy sigma=0.000753 ! Fit after self-cal, rms=0.084652Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=10.19 mas, bpa=-55.03 degrees ! Estimated noise=689.385 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 10.19 at -55.03 degrees (North through East) ! Clean map min=-0.001548 max=0.087132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=10.44 mas, bpa=-53.04 degrees ! Estimated noise=1360.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0672242 Jy ! Component: 100 - total flux cleaned = 0.0819129 Jy ! Component: 150 - total flux cleaned = 0.0867027 Jy ! Component: 200 - total flux cleaned = 0.0895086 Jy ! Total flux subtracted in 200 components = 0.0895086 Jy ! Clean residual min=-0.003810 max=0.003777 Jy/beam ! Clean residual mean=-0.000020 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.0895086 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0895086 Jy ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=10.19 mas, bpa=-55.03 degrees ! Estimated noise=689.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216244 Jy ! Component: 100 - total flux cleaned = 0.00260458 Jy ! Component: 150 - total flux cleaned = 0.00272344 Jy ! Component: 200 - total flux cleaned = 0.00286043 Jy ! Total flux subtracted in 200 components = 0.00286043 Jy ! Clean residual min=-0.001875 max=0.001752 Jy/beam ! Clean residual mean=-0.000009 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.092369 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 0.092369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=11.18 mas, bpa=-75.33 degrees ! Estimated noise=854.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285406 Jy ! Component: 100 - total flux cleaned = 0.000466577 Jy ! Component: 150 - total flux cleaned = 0.000534737 Jy ! Component: 200 - total flux cleaned = 0.000595604 Jy ! Total flux subtracted in 200 components = 0.000595604 Jy ! Clean residual min=-0.001746 max=0.001728 Jy/beam ! Clean residual mean=-0.000013 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0929646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.45477e-05 Jy ! Component: 100 - total flux cleaned = 0.000104456 Jy ! Component: 150 - total flux cleaned = 0.000160731 Jy ! Component: 200 - total flux cleaned = 0.000191887 Jy ! Total flux subtracted in 200 components = 0.000191887 Jy ! Clean residual min=-0.001690 max=0.001712 Jy/beam ! Clean residual mean=-0.000013 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0931565 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.0931565 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=10.19 mas, bpa=-55.03 degrees ! Estimated noise=689.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282046 Jy ! Component: 100 - total flux cleaned = -0.00019135 Jy ! Component: 150 - total flux cleaned = -0.00012964 Jy ! Component: 200 - total flux cleaned = -7.3752e-05 Jy ! Total flux subtracted in 200 components = -7.3752e-05 Jy ! Clean residual min=-0.001726 max=0.001541 Jy/beam ! Clean residual mean=-0.000008 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0930828 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.0930828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084663Jy sigma=0.000753 ! Fit after self-cal, rms=0.084658Jy sigma=0.000753 wmodel J1112+3503_S_2015_01_22_pus_map.mod ! Writing 71 model components to file: J1112+3503_S_2015_01_22_pus_map.mod wobs J1112+3503_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1112+3503_S_2015_01_22_pus_uvs.fits wwins J1112+3503_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1112+3503_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344358 Jy ! Component: 100 - total flux cleaned = -0.000265712 Jy ! Component: 150 - total flux cleaned = -0.00024137 Jy ! Component: 200 - total flux cleaned = -0.000218159 Jy ! Component: 250 - total flux cleaned = -0.000174594 Jy ! Component: 300 - total flux cleaned = -0.000195304 Jy ! Component: 350 - total flux cleaned = -0.000254889 Jy ! Component: 400 - total flux cleaned = -0.000293121 Jy ! Component: 450 - total flux cleaned = -0.000347993 Jy ! Component: 500 - total flux cleaned = -0.000400974 Jy ! Component: 550 - total flux cleaned = -0.000452128 Jy ! Component: 600 - total flux cleaned = -0.000518297 Jy ! Component: 650 - total flux cleaned = -0.000566791 Jy ! Component: 700 - total flux cleaned = -0.000662384 Jy ! Component: 750 - total flux cleaned = -0.000801977 Jy ! Component: 800 - total flux cleaned = -0.00090798 Jy ! Component: 850 - total flux cleaned = -0.000982273 Jy ! Component: 900 - total flux cleaned = -0.00112758 Jy ! Component: 950 - total flux cleaned = -0.00121295 Jy ! Component: 1000 - total flux cleaned = -0.00133879 Jy ! Component: 1050 - total flux cleaned = -0.00140739 Jy ! Component: 1100 - total flux cleaned = -0.00148835 Jy ! Component: 1150 - total flux cleaned = -0.00155465 Jy ! Component: 1200 - total flux cleaned = -0.00160685 Jy ! Component: 1250 - total flux cleaned = -0.00167111 Jy ! Component: 1300 - total flux cleaned = -0.00169646 Jy ! Component: 1350 - total flux cleaned = -0.00174659 Jy ! Component: 1400 - total flux cleaned = -0.0017835 Jy ! Component: 1450 - total flux cleaned = -0.00180795 Jy ! Component: 1500 - total flux cleaned = -0.00191529 Jy ! Component: 1550 - total flux cleaned = -0.00193868 Jy ! Component: 1600 - total flux cleaned = -0.00200812 Jy ! Component: 1650 - total flux cleaned = -0.0020425 Jy ! Component: 1700 - total flux cleaned = -0.00209903 Jy ! Component: 1750 - total flux cleaned = -0.00216607 Jy ! Component: 1800 - total flux cleaned = -0.00224304 Jy ! Component: 1850 - total flux cleaned = -0.00229746 Jy ! Component: 1900 - total flux cleaned = -0.00232968 Jy ! Component: 1950 - total flux cleaned = -0.0023509 Jy ! Component: 2000 - total flux cleaned = -0.00238255 Jy ! Component: 2050 - total flux cleaned = -0.00239317 Jy ! Component: 2100 - total flux cleaned = -0.00241401 Jy ! Component: 2150 - total flux cleaned = -0.00239365 Jy ! Component: 2200 - total flux cleaned = -0.00238349 Jy ! Component: 2250 - total flux cleaned = -0.00239355 Jy ! Component: 2300 - total flux cleaned = -0.00235361 Jy ! Component: 2350 - total flux cleaned = -0.0023338 Jy ! Component: 2400 - total flux cleaned = -0.00233379 Jy ! Component: 2450 - total flux cleaned = -0.00231423 Jy ! Component: 2500 - total flux cleaned = -0.00231425 Jy ! Component: 2550 - total flux cleaned = -0.00231414 Jy ! Component: 2600 - total flux cleaned = -0.00230454 Jy ! Component: 2650 - total flux cleaned = -0.00230452 Jy ! Component: 2700 - total flux cleaned = -0.00228573 Jy ! Component: 2750 - total flux cleaned = -0.00233276 Jy ! Component: 2800 - total flux cleaned = -0.00237002 Jy ! Component: 2850 - total flux cleaned = -0.00236995 Jy ! Component: 2900 - total flux cleaned = -0.00235157 Jy ! Component: 2950 - total flux cleaned = -0.00239747 Jy ! Component: 3000 - total flux cleaned = -0.00243394 Jy ! Component: 3050 - total flux cleaned = -0.00245211 Jy ! Component: 3100 - total flux cleaned = -0.0024702 Jy ! Component: 3150 - total flux cleaned = -0.00247927 Jy ! Component: 3200 - total flux cleaned = -0.00253316 Jy ! Component: 3250 - total flux cleaned = -0.00255109 Jy ! Component: 3300 - total flux cleaned = -0.00261357 Jy ! Component: 3350 - total flux cleaned = -0.00264925 Jy ! Component: 3400 - total flux cleaned = -0.00267592 Jy ! Component: 3450 - total flux cleaned = -0.00269366 Jy ! Component: 3500 - total flux cleaned = -0.0027291 Jy ! Component: 3550 - total flux cleaned = -0.0027556 Jy ! Component: 3600 - total flux cleaned = -0.00279979 Jy ! Component: 3650 - total flux cleaned = -0.00283505 Jy ! Component: 3700 - total flux cleaned = -0.00285267 Jy ! Component: 3750 - total flux cleaned = -0.00287028 Jy ! Component: 3800 - total flux cleaned = -0.00289666 Jy ! Component: 3850 - total flux cleaned = -0.00291428 Jy ! Component: 3900 - total flux cleaned = -0.00294072 Jy ! Component: 3950 - total flux cleaned = -0.00295828 Jy ! Component: 4000 - total flux cleaned = -0.00295827 Jy ! Component: 4050 - total flux cleaned = -0.0029936 Jy ! Total flux subtracted in 4096 components = -0.00301129 Jy ! Clean residual min=-0.000508 max=0.000550 Jy/beam ! Clean residual mean=-0.000001 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0900715 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 331 components and 0.0900715 Jy ![Exited script file: muppet] wmap "J1112+3503_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 10.19 at -55.03 degrees (North through East) ! Clean map min=-0.0012775 max=0.086071 Jy/beam ! Writing clean map to FITS file: J1112+3503_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0860715 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141529 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.493297 0.493297 0.986593 1.97319 3.94637 7.89275 15.7855 31.571 63.142 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 10.19 at -55.03 degrees (North through East) ! Clean map min=-0.0012775 max=0.086071 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1112+3503_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:14 2017