! Started logfile: J1112+3446_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:01 2017 obs J1112+3446_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1112+3446_S_2015_01_22_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1112+3446 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1112+3446_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.847332Jy sigma=0.010172 ! Fit after self-cal, rms=0.837263Jy sigma=0.010050 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=10.45 mas, bpa=-53.22 degrees ! Estimated noise=1520.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133407 Jy ! Component: 100 - total flux cleaned = 0.163394 Jy ! Total flux subtracted in 100 components = 0.163394 Jy ! Clean residual min=-0.012188 max=0.019735 Jy/beam ! Clean residual mean=-0.000075 rms=0.004140 Jy/beam ! Combined flux in latest and established models = 0.163394 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.163394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082891Jy sigma=0.000926 ! Fit after self-cal, rms=0.082884Jy sigma=0.000926 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=10.42 mas, bpa=-53.84 degrees ! Estimated noise=909.614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983883 Jy ! Component: 100 - total flux cleaned = 0.010287 Jy ! Component: 150 - total flux cleaned = 0.0111317 Jy ! Component: 200 - total flux cleaned = 0.0121102 Jy ! Total flux subtracted in 200 components = 0.0121102 Jy ! Clean residual min=-0.010533 max=0.020032 Jy/beam ! Clean residual mean=-0.000149 rms=0.004425 Jy/beam ! Combined flux in latest and established models = 0.175504 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.175504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081589Jy sigma=0.000901 ! Fit after self-cal, rms=0.081571Jy sigma=0.000901 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.91 KP 1.03 ! LA 2.03 MK 0.98 NL 0.92 OV 0.88 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.96 KP 0.91 ! LA 1.84 MK 1.01 NL 1.07 OV 0.93 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.96 KP 0.79 ! LA 1.50 MK 1.02 NL 1.31 OV 0.84 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.95 KP 0.75 ! LA 1.80 MK 0.95 NL 0.91 OV 0.94 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.081571Jy sigma=0.000901 ! Fit after self-cal, rms=0.086067Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.28 mas, bpa=-54.16 degrees ! Estimated noise=893.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049189 Jy ! Component: 100 - total flux cleaned = 0.00684887 Jy ! Component: 150 - total flux cleaned = 0.00733179 Jy ! Component: 200 - total flux cleaned = 0.00761056 Jy ! Total flux subtracted in 200 components = 0.00761056 Jy ! Clean residual min=-0.002874 max=0.002501 Jy/beam ! Clean residual mean=-0.000020 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.183114 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.183114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085819Jy sigma=0.000761 ! Fit after self-cal, rms=0.086267Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086267Jy sigma=0.000759 ! Fit after self-cal, rms=0.086916Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.26 mas, bpa=-54.18 degrees ! Estimated noise=890.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130193 Jy ! Component: 100 - total flux cleaned = 0.00173171 Jy ! Component: 150 - total flux cleaned = 0.00187108 Jy ! Component: 200 - total flux cleaned = 0.00193159 Jy ! Total flux subtracted in 200 components = 0.00193159 Jy ! Clean residual min=-0.002448 max=0.002219 Jy/beam ! Clean residual mean=-0.000015 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.185046 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.185046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086885Jy sigma=0.000758 ! Fit after self-cal, rms=0.086894Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242844 Jy ! Component: 100 - total flux cleaned = 0.000219785 Jy ! Component: 150 - total flux cleaned = 0.00024223 Jy ! Component: 200 - total flux cleaned = 0.000263266 Jy ! Total flux subtracted in 200 components = 0.000263266 Jy ! Clean residual min=-0.002368 max=0.002085 Jy/beam ! Clean residual mean=-0.000015 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.185309 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 0.185309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086885Jy sigma=0.000758 ! Fit after self-cal, rms=0.086887Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086887Jy sigma=0.000758 ! Fit after self-cal, rms=0.086931Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.25 mas, bpa=-54.19 degrees ! Estimated noise=888.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396356 Jy ! Component: 100 - total flux cleaned = 0.000418176 Jy ! Component: 150 - total flux cleaned = 0.000437124 Jy ! Component: 200 - total flux cleaned = 0.000437492 Jy ! Total flux subtracted in 200 components = 0.000437492 Jy ! Clean residual min=-0.002208 max=0.002048 Jy/beam ! Clean residual mean=-0.000014 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.185747 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.185747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086922Jy sigma=0.000758 ! Fit after self-cal, rms=0.086924Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.66455e-05 Jy ! Component: 100 - total flux cleaned = 0.000121256 Jy ! Component: 150 - total flux cleaned = 0.000162717 Jy ! Component: 200 - total flux cleaned = 0.000201634 Jy ! Total flux subtracted in 200 components = 0.000201634 Jy ! Clean residual min=-0.002180 max=0.002033 Jy/beam ! Clean residual mean=-0.000014 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.185948 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.185948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086919Jy sigma=0.000758 ! Fit after self-cal, rms=0.086920Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086920Jy sigma=0.000758 ! Fit after self-cal, rms=0.086968Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.566 mas, bmaj=11.18 mas, bpa=-74.22 degrees ! Estimated noise=1109.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041927 Jy ! Component: 100 - total flux cleaned = 0.000587192 Jy ! Component: 150 - total flux cleaned = 0.000644878 Jy ! Component: 200 - total flux cleaned = 0.000685468 Jy ! Total flux subtracted in 200 components = 0.000685468 Jy ! Clean residual min=-0.002064 max=0.001822 Jy/beam ! Clean residual mean=-0.000025 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.186634 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.186634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086967Jy sigma=0.000758 ! Fit after self-cal, rms=0.086969Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.90459e-05 Jy ! Component: 100 - total flux cleaned = 7.51031e-05 Jy ! Component: 150 - total flux cleaned = 8.30963e-05 Jy ! Component: 200 - total flux cleaned = 9.10707e-05 Jy ! Total flux subtracted in 200 components = 9.10707e-05 Jy ! Clean residual min=-0.002023 max=0.001828 Jy/beam ! Clean residual mean=-0.000024 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.186725 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 139 components and 0.186725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086967Jy sigma=0.000758 ! Fit after self-cal, rms=0.086968Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.24 mas, bpa=-54.21 degrees ! Estimated noise=888.543 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 10.24 at -54.21 degrees (North through East) ! Clean map min=-0.0031169 max=0.1693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=10.31 mas, bpa=-53.52 degrees ! Estimated noise=1475.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129354 Jy ! Component: 100 - total flux cleaned = 0.158638 Jy ! Component: 150 - total flux cleaned = 0.170448 Jy ! Component: 200 - total flux cleaned = 0.176564 Jy ! Total flux subtracted in 200 components = 0.176564 Jy ! Clean residual min=-0.003663 max=0.003678 Jy/beam ! Clean residual mean=-0.000013 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.176564 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.176564 Jy ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.24 mas, bpa=-54.21 degrees ! Estimated noise=888.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036179 Jy ! Component: 100 - total flux cleaned = 0.00574455 Jy ! Component: 150 - total flux cleaned = 0.00674489 Jy ! Component: 200 - total flux cleaned = 0.00731319 Jy ! Total flux subtracted in 200 components = 0.00731319 Jy ! Clean residual min=-0.002712 max=0.002298 Jy/beam ! Clean residual mean=-0.000015 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.183877 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 48 components and 0.183877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.566 mas, bmaj=11.18 mas, bpa=-74.22 degrees ! Estimated noise=1109.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164374 Jy ! Component: 100 - total flux cleaned = 0.00241342 Jy ! Component: 150 - total flux cleaned = 0.00247819 Jy ! Component: 200 - total flux cleaned = 0.00250738 Jy ! Total flux subtracted in 200 components = 0.00250738 Jy ! Clean residual min=-0.002518 max=0.001789 Jy/beam ! Clean residual mean=-0.000024 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.186384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96594e-05 Jy ! Component: 100 - total flux cleaned = -5.04689e-05 Jy ! Component: 150 - total flux cleaned = -5.04071e-05 Jy ! Component: 200 - total flux cleaned = -2.97681e-05 Jy ! Total flux subtracted in 200 components = -2.97681e-05 Jy ! Clean residual min=-0.002412 max=0.001789 Jy/beam ! Clean residual mean=-0.000024 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.186355 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 85 components and 0.186355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=10.24 mas, bpa=-54.21 degrees ! Estimated noise=888.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.82639e-05 Jy ! Component: 100 - total flux cleaned = 0.000176987 Jy ! Component: 150 - total flux cleaned = 0.00020744 Jy ! Component: 200 - total flux cleaned = 0.000287833 Jy ! Total flux subtracted in 200 components = 0.000287833 Jy ! Clean residual min=-0.002385 max=0.001968 Jy/beam ! Clean residual mean=-0.000012 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.186642 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.186642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086993Jy sigma=0.000758 ! Fit after self-cal, rms=0.086987Jy sigma=0.000758 wmodel J1112+3446_S_2015_01_22_pus_map.mod ! Writing 105 model components to file: J1112+3446_S_2015_01_22_pus_map.mod wobs J1112+3446_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1112+3446_S_2015_01_22_pus_uvs.fits wwins J1112+3446_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1112+3446_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105317 Jy ! Component: 100 - total flux cleaned = -0.00152482 Jy ! Component: 150 - total flux cleaned = -0.0017882 Jy ! Component: 200 - total flux cleaned = -0.00184915 Jy ! Component: 250 - total flux cleaned = -0.00196219 Jy ! Component: 300 - total flux cleaned = -0.00220348 Jy ! Component: 350 - total flux cleaned = -0.00230565 Jy ! Component: 400 - total flux cleaned = -0.00237874 Jy ! Component: 450 - total flux cleaned = -0.00247253 Jy ! Component: 500 - total flux cleaned = -0.00256251 Jy ! Component: 550 - total flux cleaned = -0.00267134 Jy ! Component: 600 - total flux cleaned = -0.00267083 Jy ! Component: 650 - total flux cleaned = -0.00273281 Jy ! Component: 700 - total flux cleaned = -0.00277248 Jy ! Component: 750 - total flux cleaned = -0.00283037 Jy ! Component: 800 - total flux cleaned = -0.00281158 Jy ! Component: 850 - total flux cleaned = -0.00282961 Jy ! Component: 900 - total flux cleaned = -0.00279377 Jy ! Component: 950 - total flux cleaned = -0.0027764 Jy ! Component: 1000 - total flux cleaned = -0.0027595 Jy ! Component: 1050 - total flux cleaned = -0.00275979 Jy ! Component: 1100 - total flux cleaned = -0.00272725 Jy ! Component: 1150 - total flux cleaned = -0.0027275 Jy ! Component: 1200 - total flux cleaned = -0.00271171 Jy ! Component: 1250 - total flux cleaned = -0.00271161 Jy ! Component: 1300 - total flux cleaned = -0.00268068 Jy ! Component: 1350 - total flux cleaned = -0.00263536 Jy ! Component: 1400 - total flux cleaned = -0.00262042 Jy ! Component: 1450 - total flux cleaned = -0.00256182 Jy ! Component: 1500 - total flux cleaned = -0.00253314 Jy ! Component: 1550 - total flux cleaned = -0.00250482 Jy ! Component: 1600 - total flux cleaned = -0.00247671 Jy ! Component: 1650 - total flux cleaned = -0.00246277 Jy ! Component: 1700 - total flux cleaned = -0.00242172 Jy ! Component: 1750 - total flux cleaned = -0.00238109 Jy ! Component: 1800 - total flux cleaned = -0.0023677 Jy ! Component: 1850 - total flux cleaned = -0.00235446 Jy ! Component: 1900 - total flux cleaned = -0.00231545 Jy ! Component: 1950 - total flux cleaned = -0.0023027 Jy ! Component: 2000 - total flux cleaned = -0.00230268 Jy ! Component: 2050 - total flux cleaned = -0.00230257 Jy ! Component: 2100 - total flux cleaned = -0.00229005 Jy ! Component: 2150 - total flux cleaned = -0.00230263 Jy ! Component: 2200 - total flux cleaned = -0.002315 Jy ! Component: 2250 - total flux cleaned = -0.00231494 Jy ! Component: 2300 - total flux cleaned = -0.00225447 Jy ! Component: 2350 - total flux cleaned = -0.00224245 Jy ! Component: 2400 - total flux cleaned = -0.00223035 Jy ! Component: 2450 - total flux cleaned = -0.00219451 Jy ! Component: 2500 - total flux cleaned = -0.00219461 Jy ! Component: 2550 - total flux cleaned = -0.00213522 Jy ! Component: 2600 - total flux cleaned = -0.00213531 Jy ! Component: 2650 - total flux cleaned = -0.00211168 Jy ! Component: 2700 - total flux cleaned = -0.00213526 Jy ! Component: 2750 - total flux cleaned = -0.00209995 Jy ! Component: 2800 - total flux cleaned = -0.00207638 Jy ! Component: 2850 - total flux cleaned = -0.00208819 Jy ! Component: 2900 - total flux cleaned = -0.00207644 Jy ! Component: 2950 - total flux cleaned = -0.0020531 Jy ! Component: 3000 - total flux cleaned = -0.00205312 Jy ! Component: 3050 - total flux cleaned = -0.00201806 Jy ! Component: 3100 - total flux cleaned = -0.00202963 Jy ! Component: 3150 - total flux cleaned = -0.0020063 Jy ! Component: 3200 - total flux cleaned = -0.00199472 Jy ! Component: 3250 - total flux cleaned = -0.00200627 Jy ! Component: 3300 - total flux cleaned = -0.00199464 Jy ! Component: 3350 - total flux cleaned = -0.00198301 Jy ! Component: 3400 - total flux cleaned = -0.00195982 Jy ! Component: 3450 - total flux cleaned = -0.00199463 Jy ! Component: 3500 - total flux cleaned = -0.001983 Jy ! Component: 3550 - total flux cleaned = -0.001983 Jy ! Component: 3600 - total flux cleaned = -0.00199461 Jy ! Component: 3650 - total flux cleaned = -0.00198301 Jy ! Component: 3700 - total flux cleaned = -0.00198304 Jy ! Component: 3750 - total flux cleaned = -0.00194798 Jy ! Component: 3800 - total flux cleaned = -0.00195967 Jy ! Component: 3850 - total flux cleaned = -0.00198308 Jy ! Component: 3900 - total flux cleaned = -0.00198303 Jy ! Component: 3950 - total flux cleaned = -0.00198311 Jy ! Component: 4000 - total flux cleaned = -0.00199492 Jy ! Component: 4050 - total flux cleaned = -0.00200678 Jy ! Total flux subtracted in 4096 components = -0.00200675 Jy ! Clean residual min=-0.000723 max=0.000682 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.184636 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 336 components and 0.184636 Jy ![Exited script file: muppet] wmap "J1112+3446_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 10.24 at -54.21 degrees (North through East) ! Clean map min=-0.0016787 max=0.1671 Jy/beam ! Writing clean map to FITS file: J1112+3446_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167105 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333035 0.333035 0.66607 1.33214 2.66428 5.32856 10.6571 21.3142 42.6285 85.257 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 10.24 at -54.21 degrees (North through East) ! Clean map min=-0.0016787 max=0.1671 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1112+3446_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:08 2017