! Started logfile: J1110+6028_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:59 2017 obs J1110+6028_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1110+6028_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501111 visibilities/baseline/integration-bin. ! Found source: J1110+6028 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1110+6028_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.727437Jy sigma=0.010847 ! Fit after self-cal, rms=0.690184Jy sigma=0.010396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=6.017 mas, bpa=74.91 degrees ! Estimated noise=1151.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232012 Jy ! Component: 100 - total flux cleaned = 0.290086 Jy ! Total flux subtracted in 100 components = 0.290086 Jy ! Clean residual min=-0.014040 max=0.023449 Jy/beam ! Clean residual mean=-0.000214 rms=0.004314 Jy/beam ! Combined flux in latest and established models = 0.290086 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.290086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092604Jy sigma=0.001229 ! Fit after self-cal, rms=0.092594Jy sigma=0.001228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.118 mas, bpa=71.09 degrees ! Estimated noise=677.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316567 Jy ! Component: 100 - total flux cleaned = 0.0453518 Jy ! Component: 150 - total flux cleaned = 0.053314 Jy ! Component: 200 - total flux cleaned = 0.058426 Jy ! Total flux subtracted in 200 components = 0.058426 Jy ! Clean residual min=-0.009591 max=0.015287 Jy/beam ! Clean residual mean=-0.000325 rms=0.003292 Jy/beam ! Combined flux in latest and established models = 0.348512 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.348512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080194Jy sigma=0.001101 ! Fit after self-cal, rms=0.080160Jy sigma=0.001100 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.07 ! MK 0.99 NL 0.95 OV 0.93 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.04 ! MK 0.99 NL 1.02 OV 0.95 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 0.98 OV 0.90 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.92 ! MK 0.99 NL 1.08 OV 0.96 PT 0.99 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.080160Jy sigma=0.001100 ! Fit after self-cal, rms=0.070666Jy sigma=0.000964 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=7.097 mas, bpa=70.98 degrees ! Estimated noise=673.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, 58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109859 Jy ! Component: 100 - total flux cleaned = 0.0160431 Jy ! Component: 150 - total flux cleaned = 0.019405 Jy ! Component: 200 - total flux cleaned = 0.0208579 Jy ! Total flux subtracted in 200 components = 0.0208579 Jy ! Clean residual min=-0.005301 max=0.009199 Jy/beam ! Clean residual mean=-0.000192 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.36937 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.36937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069025Jy sigma=0.000936 ! Fit after self-cal, rms=0.068647Jy sigma=0.000934 ! Inverting map ! Added new window around map position (-3.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007694 Jy ! Component: 100 - total flux cleaned = 0.0113227 Jy ! Component: 150 - total flux cleaned = 0.0139566 Jy ! Component: 200 - total flux cleaned = 0.0160753 Jy ! Total flux subtracted in 200 components = 0.0160753 Jy ! Clean residual min=-0.004264 max=0.004919 Jy/beam ! Clean residual mean=-0.000133 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.385445 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 84 components and 0.385445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067750Jy sigma=0.000920 ! Fit after self-cal, rms=0.067696Jy sigma=0.000919 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067696Jy sigma=0.000919 ! Fit after self-cal, rms=0.066960Jy sigma=0.000912 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=7.087 mas, bpa=71.09 degrees ! Estimated noise=672.875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324162 Jy ! Component: 100 - total flux cleaned = 0.0044287 Jy ! Component: 150 - total flux cleaned = 0.00526245 Jy ! Component: 200 - total flux cleaned = 0.0059226 Jy ! Total flux subtracted in 200 components = 0.0059226 Jy ! Clean residual min=-0.003320 max=0.003622 Jy/beam ! Clean residual mean=-0.000049 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.391368 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 115 components and 0.391368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066746Jy sigma=0.000909 ! Fit after self-cal, rms=0.066716Jy sigma=0.000909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (100.5, 41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316148 Jy ! Component: 100 - total flux cleaned = 0.00387286 Jy ! Component: 150 - total flux cleaned = 0.00433437 Jy ! Component: 200 - total flux cleaned = 0.00458932 Jy ! Total flux subtracted in 200 components = 0.00458932 Jy ! Clean residual min=-0.002866 max=0.002808 Jy/beam ! Clean residual mean=-0.000056 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.395957 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 0.395957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066518Jy sigma=0.000906 ! Fit after self-cal, rms=0.066498Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066498Jy sigma=0.000906 ! Fit after self-cal, rms=0.066314Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=7.084 mas, bpa=71.08 degrees ! Estimated noise=671.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38724e-05 Jy ! Component: 100 - total flux cleaned = 0.000361787 Jy ! Component: 150 - total flux cleaned = 0.000720611 Jy ! Component: 200 - total flux cleaned = 0.000885895 Jy ! Total flux subtracted in 200 components = 0.000885895 Jy ! Clean residual min=-0.002583 max=0.002659 Jy/beam ! Clean residual mean=-0.000043 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.396843 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 155 components and 0.396843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066239Jy sigma=0.000905 ! Fit after self-cal, rms=0.066228Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124261 Jy ! Component: 100 - total flux cleaned = 0.000320402 Jy ! Component: 150 - total flux cleaned = 0.000465602 Jy ! Component: 200 - total flux cleaned = 0.000534474 Jy ! Total flux subtracted in 200 components = 0.000534474 Jy ! Clean residual min=-0.002353 max=0.002542 Jy/beam ! Clean residual mean=-0.000040 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.397377 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 169 components and 0.397378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066183Jy sigma=0.000904 ! Fit after self-cal, rms=0.066178Jy sigma=0.000904 ! Inverting map ! Added new window around map position (2, -71). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214781 Jy ! Component: 100 - total flux cleaned = 0.00253683 Jy ! Component: 150 - total flux cleaned = 0.00285321 Jy ! Component: 200 - total flux cleaned = 0.00303358 Jy ! Total flux subtracted in 200 components = 0.00303358 Jy ! Clean residual min=-0.002072 max=0.001867 Jy/beam ! Clean residual mean=-0.000024 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.400411 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 191 components and 0.400411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066088Jy sigma=0.000903 ! Fit after self-cal, rms=0.066083Jy sigma=0.000903 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066083Jy sigma=0.000903 ! Fit after self-cal, rms=0.066039Jy sigma=0.000903 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=11.53 mas, bpa=69.48 degrees ! Estimated noise=780.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582899 Jy ! Component: 100 - total flux cleaned = 0.000761653 Jy ! Component: 150 - total flux cleaned = 0.000963336 Jy ! Component: 200 - total flux cleaned = 0.00116645 Jy ! Total flux subtracted in 200 components = 0.00116645 Jy ! Clean residual min=-0.001783 max=0.001665 Jy/beam ! Clean residual mean=-0.000038 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.401578 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 223 components and 0.401578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066018Jy sigma=0.000902 ! Fit after self-cal, rms=0.066015Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.39774e-05 Jy ! Component: 100 - total flux cleaned = 0.000134371 Jy ! Component: 150 - total flux cleaned = 0.000176513 Jy ! Component: 200 - total flux cleaned = 0.000157907 Jy ! Total flux subtracted in 200 components = 0.000157907 Jy ! Clean residual min=-0.001722 max=0.001558 Jy/beam ! Clean residual mean=-0.000034 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.401735 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 240 components and 0.401736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066004Jy sigma=0.000902 ! Fit after self-cal, rms=0.066003Jy sigma=0.000902 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=7.084 mas, bpa=71.11 degrees ! Estimated noise=671.642 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 7.084 at 71.11 degrees (North through East) ! Clean map min=-0.0020259 max=0.30486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=5.975 mas, bpa=74.8 degrees ! Estimated noise=1150.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231623 Jy ! Component: 100 - total flux cleaned = 0.290209 Jy ! Component: 150 - total flux cleaned = 0.316477 Jy ! Component: 200 - total flux cleaned = 0.331802 Jy ! Total flux subtracted in 200 components = 0.331802 Jy ! Clean residual min=-0.006553 max=0.008460 Jy/beam ! Clean residual mean=-0.000102 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.331802 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.331802 Jy ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=7.084 mas, bpa=71.11 degrees ! Estimated noise=671.642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134827 Jy ! Component: 100 - total flux cleaned = 0.0223499 Jy ! Component: 150 - total flux cleaned = 0.0287438 Jy ! Component: 200 - total flux cleaned = 0.0337302 Jy ! Total flux subtracted in 200 components = 0.0337302 Jy ! Clean residual min=-0.004137 max=0.004612 Jy/beam ! Clean residual mean=-0.000135 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.365532 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 56 components and 0.365532 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=11.53 mas, bpa=69.48 degrees ! Estimated noise=780.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644282 Jy ! Component: 100 - total flux cleaned = 0.0110149 Jy ! Component: 150 - total flux cleaned = 0.0146697 Jy ! Component: 200 - total flux cleaned = 0.0176926 Jy ! Total flux subtracted in 200 components = 0.0176926 Jy ! Clean residual min=-0.003762 max=0.003365 Jy/beam ! Clean residual mean=-0.000149 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.383225 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252955 Jy ! Component: 100 - total flux cleaned = 0.0043343 Jy ! Component: 150 - total flux cleaned = 0.00588917 Jy ! Component: 200 - total flux cleaned = 0.00718381 Jy ! Total flux subtracted in 200 components = 0.00718381 Jy ! Clean residual min=-0.002803 max=0.002221 Jy/beam ! Clean residual mean=-0.000100 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.390409 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 159 components and 0.390409 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=7.084 mas, bpa=71.11 degrees ! Estimated noise=671.642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198732 Jy ! Component: 100 - total flux cleaned = 0.00305322 Jy ! Component: 150 - total flux cleaned = 0.00397862 Jy ! Component: 200 - total flux cleaned = 0.00458488 Jy ! Total flux subtracted in 200 components = 0.00458488 Jy ! Clean residual min=-0.002138 max=0.001984 Jy/beam ! Clean residual mean=-0.000035 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.394994 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 185 components and 0.394994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066137Jy sigma=0.000903 ! Fit after self-cal, rms=0.066119Jy sigma=0.000903 wmodel J1110+6028_S_2014_01_04_pus_map.mod ! Writing 185 model components to file: J1110+6028_S_2014_01_04_pus_map.mod wobs J1110+6028_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1110+6028_S_2014_01_04_pus_uvs.fits wwins J1110+6028_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J1110+6028_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000684904 Jy ! Component: 100 - total flux cleaned = -0.000786424 Jy ! Component: 150 - total flux cleaned = -0.000818037 Jy ! Component: 200 - total flux cleaned = -0.000877072 Jy ! Component: 250 - total flux cleaned = -0.000963392 Jy ! Component: 300 - total flux cleaned = -0.000990426 Jy ! Component: 350 - total flux cleaned = -0.000937312 Jy ! Component: 400 - total flux cleaned = -0.000963056 Jy ! Component: 450 - total flux cleaned = -0.00101192 Jy ! Component: 500 - total flux cleaned = -0.000987809 Jy ! Component: 550 - total flux cleaned = -0.00103476 Jy ! Component: 600 - total flux cleaned = -0.0011245 Jy ! Component: 650 - total flux cleaned = -0.00112346 Jy ! Component: 700 - total flux cleaned = -0.00118632 Jy ! Component: 750 - total flux cleaned = -0.00118601 Jy ! Component: 800 - total flux cleaned = -0.0012469 Jy ! Component: 850 - total flux cleaned = -0.00128607 Jy ! Component: 900 - total flux cleaned = -0.0013439 Jy ! Component: 950 - total flux cleaned = -0.00143772 Jy ! Component: 1000 - total flux cleaned = -0.00151061 Jy ! Component: 1050 - total flux cleaned = -0.001564 Jy ! Component: 1100 - total flux cleaned = -0.00165165 Jy ! Component: 1150 - total flux cleaned = -0.00177156 Jy ! Component: 1200 - total flux cleaned = -0.00182184 Jy ! Component: 1250 - total flux cleaned = -0.00185447 Jy ! Component: 1300 - total flux cleaned = -0.00191855 Jy ! Component: 1350 - total flux cleaned = -0.00191858 Jy ! Component: 1400 - total flux cleaned = -0.00194976 Jy ! Component: 1450 - total flux cleaned = -0.00194997 Jy ! Component: 1500 - total flux cleaned = -0.00193497 Jy ! Component: 1550 - total flux cleaned = -0.00193518 Jy ! Component: 1600 - total flux cleaned = -0.00190639 Jy ! Component: 1650 - total flux cleaned = -0.00186345 Jy ! Component: 1700 - total flux cleaned = -0.00177888 Jy ! Component: 1750 - total flux cleaned = -0.00169588 Jy ! Component: 1800 - total flux cleaned = -0.00165478 Jy ! Component: 1850 - total flux cleaned = -0.00158714 Jy ! Component: 1900 - total flux cleaned = -0.0015208 Jy ! Component: 1950 - total flux cleaned = -0.00144221 Jy ! Component: 2000 - total flux cleaned = -0.00135177 Jy ! Component: 2050 - total flux cleaned = -0.00128824 Jy ! Component: 2100 - total flux cleaned = -0.00121283 Jy ! Component: 2150 - total flux cleaned = -0.00117559 Jy ! Component: 2200 - total flux cleaned = -0.00111411 Jy ! Component: 2250 - total flux cleaned = -0.00107777 Jy ! Component: 2300 - total flux cleaned = -0.00104157 Jy ! Component: 2350 - total flux cleaned = -0.00101783 Jy ! Component: 2400 - total flux cleaned = -0.000982666 Jy ! Component: 2450 - total flux cleaned = -0.000959424 Jy ! Component: 2500 - total flux cleaned = -0.000924829 Jy ! Component: 2550 - total flux cleaned = -0.000936107 Jy ! Component: 2600 - total flux cleaned = -0.000935976 Jy ! Component: 2650 - total flux cleaned = -0.000879954 Jy ! Component: 2700 - total flux cleaned = -0.000857801 Jy ! Component: 2750 - total flux cleaned = -0.000857987 Jy ! Component: 2800 - total flux cleaned = -0.000890712 Jy ! Component: 2850 - total flux cleaned = -0.000858063 Jy ! Component: 2900 - total flux cleaned = -0.000847074 Jy ! Component: 2950 - total flux cleaned = -0.000825722 Jy ! Component: 3000 - total flux cleaned = -0.000825729 Jy ! Component: 3050 - total flux cleaned = -0.000815188 Jy ! Component: 3100 - total flux cleaned = -0.000804744 Jy ! Component: 3150 - total flux cleaned = -0.000804858 Jy ! Component: 3200 - total flux cleaned = -0.000835744 Jy ! Component: 3250 - total flux cleaned = -0.000794649 Jy ! Component: 3300 - total flux cleaned = -0.000764134 Jy ! Component: 3350 - total flux cleaned = -0.000764192 Jy ! Component: 3400 - total flux cleaned = -0.00076416 Jy ! Component: 3450 - total flux cleaned = -0.000744167 Jy ! Component: 3500 - total flux cleaned = -0.000754 Jy ! Component: 3550 - total flux cleaned = -0.000744155 Jy ! Component: 3600 - total flux cleaned = -0.000714722 Jy ! Component: 3650 - total flux cleaned = -0.000695404 Jy ! Component: 3700 - total flux cleaned = -0.000724607 Jy ! Component: 3750 - total flux cleaned = -0.000743888 Jy ! Component: 3800 - total flux cleaned = -0.000734278 Jy ! Component: 3850 - total flux cleaned = -0.000753229 Jy ! Component: 3900 - total flux cleaned = -0.000715398 Jy ! Component: 3950 - total flux cleaned = -0.000724813 Jy ! Component: 4000 - total flux cleaned = -0.000724878 Jy ! Component: 4050 - total flux cleaned = -0.000715643 Jy ! Total flux subtracted in 4096 components = -0.00069719 Jy ! Clean residual min=-0.000596 max=0.000741 Jy/beam ! Clean residual mean=-0.000003 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.394297 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 408 components and 0.394297 Jy ![Exited script file: muppet] wmap "J1110+6028_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 7.084 at 71.11 degrees (North through East) ! Clean map min=-0.0011583 max=0.30679 Jy/beam ! Writing clean map to FITS file: J1110+6028_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.306789 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.151582 0.151582 0.303163 0.606326 1.21265 2.4253 4.85061 9.70122 19.4024 38.8049 77.6097 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.306 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 7.084 at 71.11 degrees (North through East) ! Clean map min=-0.0011583 max=0.30679 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1110+6028_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:05 2017