! Started logfile: J1110+4817_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:03:13 2016 obs J1110+4817_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1110+4817_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785308 visibilities/baseline/integration-bin. ! Found source: J1110+4817 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1110+4817_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920417Jy sigma=0.010538 ! Fit after self-cal, rms=0.867998Jy sigma=0.009967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=4.383 mas, bpa=-20.64 degrees ! Estimated noise=732.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099423 Jy ! Component: 100 - total flux cleaned = 0.135269 Jy ! Total flux subtracted in 100 components = 0.135269 Jy ! Clean residual min=-0.018007 max=0.072727 Jy/beam ! Clean residual mean=-0.000061 rms=0.005781 Jy/beam ! Combined flux in latest and established models = 0.135269 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.135269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131769Jy sigma=0.001460 ! Fit after self-cal, rms=0.131647Jy sigma=0.001458 ! Inverting map ! Added new window around map position (-13.5, -18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614146 Jy ! Component: 100 - total flux cleaned = 0.0864428 Jy ! Total flux subtracted in 100 components = 0.0864428 Jy ! Clean residual min=-0.008458 max=0.016084 Jy/beam ! Clean residual mean=-0.000044 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.221712 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.221712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095396Jy sigma=0.001032 ! Fit after self-cal, rms=0.092101Jy sigma=0.000991 ! Inverting map ! Added new window around map position (-2.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212473 Jy ! Component: 100 - total flux cleaned = 0.0356938 Jy ! Total flux subtracted in 100 components = 0.0356938 Jy ! Clean residual min=-0.006307 max=0.008372 Jy/beam ! Clean residual mean=-0.000026 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.257406 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.257406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084050Jy sigma=0.000899 ! Fit after self-cal, rms=0.083825Jy sigma=0.000896 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=5.347 mas, bpa=-19.91 degrees ! Estimated noise=479.336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018985 Jy ! Component: 100 - total flux cleaned = 0.0327059 Jy ! Component: 150 - total flux cleaned = 0.0432968 Jy ! Component: 200 - total flux cleaned = 0.0515891 Jy ! Total flux subtracted in 200 components = 0.0515891 Jy ! Clean residual min=-0.004413 max=0.006426 Jy/beam ! Clean residual mean=-0.000046 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.308995 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 103 components and 0.308995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077420Jy sigma=0.000826 ! Fit after self-cal, rms=0.077340Jy sigma=0.000825 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.83 HN 0.99 KP 1.02 ! LA 1.03 MK 1.01 NL 1.00 OV 0.96 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.03 KP 0.98 ! LA 1.00 MK 1.07 NL 1.04 OV 0.99 ! PT 0.95 SC 1.11 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.06 KP 0.87 ! LA 0.80 MK 1.07 NL 1.04 OV 0.94 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.03 KP 0.84 ! LA 0.77 MK 1.08 NL 1.14 OV 1.00 ! PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.077340Jy sigma=0.000825 ! Fit after self-cal, rms=0.070400Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=5.423 mas, bpa=-18.96 degrees ! Estimated noise=463.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257403 Jy ! Component: 100 - total flux cleaned = 0.00335242 Jy ! Component: 150 - total flux cleaned = 0.00405414 Jy ! Component: 200 - total flux cleaned = 0.00454722 Jy ! Total flux subtracted in 200 components = 0.00454722 Jy ! Clean residual min=-0.002847 max=0.003214 Jy/beam ! Clean residual mean=-0.000003 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.313542 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.313542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070252Jy sigma=0.000787 ! Fit after self-cal, rms=0.070256Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070256Jy sigma=0.000787 ! Fit after self-cal, rms=0.070260Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.019 mas, bmaj=5.449 mas, bpa=-19.9 degrees ! Estimated noise=464.662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126759 Jy ! Component: 100 - total flux cleaned = 0.00186059 Jy ! Component: 150 - total flux cleaned = 0.00213937 Jy ! Component: 200 - total flux cleaned = 0.00222211 Jy ! Total flux subtracted in 200 components = 0.00222211 Jy ! Clean residual min=-0.002149 max=0.002696 Jy/beam ! Clean residual mean=-0.000004 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.315764 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.315764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070210Jy sigma=0.000784 ! Fit after self-cal, rms=0.070209Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026296 Jy ! Component: 100 - total flux cleaned = 0.00372668 Jy ! Component: 150 - total flux cleaned = 0.00412965 Jy ! Component: 200 - total flux cleaned = 0.00429266 Jy ! Total flux subtracted in 200 components = 0.00429266 Jy ! Clean residual min=-0.001888 max=0.001905 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.320057 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 0.320057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070110Jy sigma=0.000783 ! Fit after self-cal, rms=0.070097Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070097Jy sigma=0.000782 ! Fit after self-cal, rms=0.070120Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=5.454 mas, bpa=-20.22 degrees ! Estimated noise=465.363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141807 Jy ! Component: 100 - total flux cleaned = 0.0022141 Jy ! Component: 150 - total flux cleaned = 0.00245584 Jy ! Component: 200 - total flux cleaned = 0.00264101 Jy ! Total flux subtracted in 200 components = 0.00264101 Jy ! Clean residual min=-0.001782 max=0.001574 Jy/beam ! Clean residual mean=-0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.322698 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 0.322698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070084Jy sigma=0.000782 ! Fit after self-cal, rms=0.070078Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432233 Jy ! Component: 100 - total flux cleaned = 0.00057866 Jy ! Component: 150 - total flux cleaned = 0.00068631 Jy ! Component: 200 - total flux cleaned = 0.000802221 Jy ! Total flux subtracted in 200 components = 0.000802221 Jy ! Clean residual min=-0.001723 max=0.001553 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.3235 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 0.3235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070064Jy sigma=0.000781 ! Fit after self-cal, rms=0.070063Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070063Jy sigma=0.000781 ! Fit after self-cal, rms=0.070094Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=9.661 mas, bpa=-36.47 degrees ! Estimated noise=560.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116601 Jy ! Component: 100 - total flux cleaned = 0.00156812 Jy ! Component: 150 - total flux cleaned = 0.00188634 Jy ! Component: 200 - total flux cleaned = 0.00213421 Jy ! Total flux subtracted in 200 components = 0.00213421 Jy ! Clean residual min=-0.002168 max=0.001686 Jy/beam ! Clean residual mean=-0.000007 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.325634 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 194 components and 0.325634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070085Jy sigma=0.000781 ! Fit after self-cal, rms=0.070081Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288435 Jy ! Component: 100 - total flux cleaned = 0.000496317 Jy ! Component: 150 - total flux cleaned = 0.000536546 Jy ! Component: 200 - total flux cleaned = 0.000585436 Jy ! Total flux subtracted in 200 components = 0.000585436 Jy ! Clean residual min=-0.002157 max=0.001632 Jy/beam ! Clean residual mean=-0.000007 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.32622 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 208 components and 0.32622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070078Jy sigma=0.000781 ! Fit after self-cal, rms=0.070078Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=5.453 mas, bpa=-20.31 degrees ! Estimated noise=465.844 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.008 x 5.453 at -20.31 degrees (North through East) ! Clean map min=-0.0015964 max=0.13177 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=4.426 mas, bpa=-20.18 degrees ! Estimated noise=719.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110641 Jy ! Component: 100 - total flux cleaned = 0.163398 Jy ! Component: 150 - total flux cleaned = 0.196831 Jy ! Component: 200 - total flux cleaned = 0.219961 Jy ! Total flux subtracted in 200 components = 0.219961 Jy ! Clean residual min=-0.007270 max=0.013071 Jy/beam ! Clean residual mean=-0.000031 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.219961 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.219961 Jy ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=5.453 mas, bpa=-20.31 degrees ! Estimated noise=465.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254901 Jy ! Component: 100 - total flux cleaned = 0.0430899 Jy ! Component: 150 - total flux cleaned = 0.0557469 Jy ! Component: 200 - total flux cleaned = 0.0652187 Jy ! Total flux subtracted in 200 components = 0.0652187 Jy ! Clean residual min=-0.003583 max=0.005942 Jy/beam ! Clean residual mean=-0.000040 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.28518 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 70 components and 0.28518 Jy ! Inverting map ! Added new window around map position (-8.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745971 Jy ! Component: 100 - total flux cleaned = 0.0133344 Jy ! Component: 150 - total flux cleaned = 0.0180383 Jy ! Component: 200 - total flux cleaned = 0.0218419 Jy ! Total flux subtracted in 200 components = 0.0218419 Jy ! Clean residual min=-0.002222 max=0.002521 Jy/beam ! Clean residual mean=-0.000021 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.307022 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 125 components and 0.307022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=9.661 mas, bpa=-36.47 degrees ! Estimated noise=560.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516351 Jy ! Component: 100 - total flux cleaned = 0.00870304 Jy ! Component: 150 - total flux cleaned = 0.011275 Jy ! Component: 200 - total flux cleaned = 0.0132058 Jy ! Total flux subtracted in 200 components = 0.0132058 Jy ! Clean residual min=-0.002155 max=0.002123 Jy/beam ! Clean residual mean=-0.000018 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.320228 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147524 Jy ! Component: 100 - total flux cleaned = 0.0026124 Jy ! Component: 150 - total flux cleaned = 0.00349698 Jy ! Component: 200 - total flux cleaned = 0.00418843 Jy ! Total flux subtracted in 200 components = 0.00418843 Jy ! Clean residual min=-0.002107 max=0.001727 Jy/beam ! Clean residual mean=-0.000010 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.324416 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 219 components and 0.324416 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=5.453 mas, bpa=-20.31 degrees ! Estimated noise=465.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198986 Jy ! Component: 100 - total flux cleaned = 0.000397133 Jy ! Component: 150 - total flux cleaned = 0.000599023 Jy ! Component: 200 - total flux cleaned = 0.000751173 Jy ! Total flux subtracted in 200 components = 0.000751173 Jy ! Clean residual min=-0.001577 max=0.001588 Jy/beam ! Clean residual mean=-0.000005 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.325167 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 231 components and 0.325167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070087Jy sigma=0.000781 ! Fit after self-cal, rms=0.070079Jy sigma=0.000781 wmodel J1110+4817_S_2014_08_09_pus_map.mod ! Writing 231 model components to file: J1110+4817_S_2014_08_09_pus_map.mod wobs J1110+4817_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1110+4817_S_2014_08_09_pus_uvs.fits wwins J1110+4817_S_2014_08_09_pus_map.win ! wwins: Wrote 5 windows to J1110+4817_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000462722 Jy ! Component: 100 - total flux cleaned = -0.000567466 Jy ! Component: 150 - total flux cleaned = -0.0006405 Jy ! Component: 200 - total flux cleaned = -0.000733559 Jy ! Component: 250 - total flux cleaned = -0.000845746 Jy ! Component: 300 - total flux cleaned = -0.000975854 Jy ! Component: 350 - total flux cleaned = -0.00108118 Jy ! Component: 400 - total flux cleaned = -0.00106026 Jy ! Component: 450 - total flux cleaned = -0.00104039 Jy ! Component: 500 - total flux cleaned = -0.00106024 Jy ! Component: 550 - total flux cleaned = -0.00106059 Jy ! Component: 600 - total flux cleaned = -0.00106067 Jy ! Component: 650 - total flux cleaned = -0.00109776 Jy ! Component: 700 - total flux cleaned = -0.00102572 Jy ! Component: 750 - total flux cleaned = -0.0010262 Jy ! Component: 800 - total flux cleaned = -0.00100897 Jy ! Component: 850 - total flux cleaned = -0.000923464 Jy ! Component: 900 - total flux cleaned = -0.000923707 Jy ! Component: 950 - total flux cleaned = -0.000939949 Jy ! Component: 1000 - total flux cleaned = -0.000907437 Jy ! Component: 1050 - total flux cleaned = -0.000907875 Jy ! Component: 1100 - total flux cleaned = -0.000908276 Jy ! Component: 1150 - total flux cleaned = -0.000923433 Jy ! Component: 1200 - total flux cleaned = -0.00086301 Jy ! Component: 1250 - total flux cleaned = -0.000938024 Jy ! Component: 1300 - total flux cleaned = -0.000923217 Jy ! Component: 1350 - total flux cleaned = -0.000893929 Jy ! Component: 1400 - total flux cleaned = -0.00087981 Jy ! Component: 1450 - total flux cleaned = -0.000907913 Jy ! Component: 1500 - total flux cleaned = -0.000893941 Jy ! Component: 1550 - total flux cleaned = -0.000989611 Jy ! Component: 1600 - total flux cleaned = -0.000921846 Jy ! Component: 1650 - total flux cleaned = -0.000935335 Jy ! Component: 1700 - total flux cleaned = -0.000935402 Jy ! Component: 1750 - total flux cleaned = -0.000922331 Jy ! Component: 1800 - total flux cleaned = -0.000909537 Jy ! Component: 1850 - total flux cleaned = -0.000922413 Jy ! Component: 1900 - total flux cleaned = -0.000897055 Jy ! Component: 1950 - total flux cleaned = -0.000884634 Jy ! Component: 2000 - total flux cleaned = -0.000884779 Jy ! Component: 2050 - total flux cleaned = -0.000909096 Jy ! Component: 2100 - total flux cleaned = -0.000957282 Jy ! Component: 2150 - total flux cleaned = -0.000933285 Jy ! Component: 2200 - total flux cleaned = -0.000921573 Jy ! Component: 2250 - total flux cleaned = -0.000956669 Jy ! Component: 2300 - total flux cleaned = -0.000979796 Jy ! Component: 2350 - total flux cleaned = -0.000968225 Jy ! Component: 2400 - total flux cleaned = -0.000934338 Jy ! Component: 2450 - total flux cleaned = -0.000923153 Jy ! Component: 2500 - total flux cleaned = -0.000945493 Jy ! Component: 2550 - total flux cleaned = -0.000934498 Jy ! Component: 2600 - total flux cleaned = -0.000923473 Jy ! Component: 2650 - total flux cleaned = -0.000956011 Jy ! Component: 2700 - total flux cleaned = -0.00096656 Jy ! Component: 2750 - total flux cleaned = -0.00097713 Jy ! Component: 2800 - total flux cleaned = -0.000998284 Jy ! Component: 2850 - total flux cleaned = -0.000998307 Jy ! Component: 2900 - total flux cleaned = -0.00101901 Jy ! Component: 2950 - total flux cleaned = -0.0010395 Jy ! Component: 3000 - total flux cleaned = -0.00105994 Jy ! Component: 3050 - total flux cleaned = -0.00106985 Jy ! Component: 3100 - total flux cleaned = -0.00107989 Jy ! Component: 3150 - total flux cleaned = -0.00107013 Jy ! Component: 3200 - total flux cleaned = -0.00108004 Jy ! Component: 3250 - total flux cleaned = -0.00111901 Jy ! Component: 3300 - total flux cleaned = -0.0011575 Jy ! Component: 3350 - total flux cleaned = -0.00119578 Jy ! Component: 3400 - total flux cleaned = -0.00120509 Jy ! Component: 3450 - total flux cleaned = -0.00119571 Jy ! Component: 3500 - total flux cleaned = -0.00123318 Jy ! Component: 3550 - total flux cleaned = -0.00123319 Jy ! Component: 3600 - total flux cleaned = -0.00131619 Jy ! Component: 3650 - total flux cleaned = -0.00131619 Jy ! Component: 3700 - total flux cleaned = -0.00137067 Jy ! Component: 3750 - total flux cleaned = -0.00141565 Jy ! Component: 3800 - total flux cleaned = -0.00144255 Jy ! Component: 3850 - total flux cleaned = -0.00146037 Jy ! Component: 3900 - total flux cleaned = -0.00150454 Jy ! Component: 3950 - total flux cleaned = -0.00152205 Jy ! Component: 4000 - total flux cleaned = -0.00153084 Jy ! Component: 4050 - total flux cleaned = -0.00155682 Jy ! Total flux subtracted in 4096 components = -0.00155678 Jy ! Clean residual min=-0.000519 max=0.000529 Jy/beam ! Clean residual mean=-0.000002 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.32361 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 507 components and 0.32361 Jy ![Exited script file: muppet] wmap "J1110+4817_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.008 x 5.453 at -20.31 degrees (North through East) ! Clean map min=-0.0010063 max=0.13322 Jy/beam ! Writing clean map to FITS file: J1110+4817_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133218 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153276 device "J1110+4817_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1110+4817_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.345168 0.345168 0.690337 1.38067 2.76135 5.52269 11.0454 22.0908 44.1816 88.3631 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.008 x 5.453 at -20.31 degrees (North through East) ! Clean map min=-0.0010063 max=0.13322 Jy/beam quit ! Quitting program ! Log file J1110+4817_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:03:20 2016