! Started logfile: J1109+3744_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:50:48 2017 obs J1109+3744_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1109+3744_S_2015_01_22_pus_uva.fits ! AN table 1: 49 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1109+3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 5488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1109+3744_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.708247Jy sigma=0.008771 ! Fit after self-cal, rms=0.690684Jy sigma=0.008541 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=10.36 mas, bpa=-53.84 degrees ! Estimated noise=1253.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237278 Jy ! Component: 100 - total flux cleaned = 0.337671 Jy ! Total flux subtracted in 100 components = 0.337671 Jy ! Clean residual min=-0.027102 max=0.048925 Jy/beam ! Clean residual mean=-0.000184 rms=0.012481 Jy/beam ! Combined flux in latest and established models = 0.337671 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.337671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154376Jy sigma=0.001931 ! Fit after self-cal, rms=0.154167Jy sigma=0.001929 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=10.47 mas, bpa=-55.3 degrees ! Estimated noise=781.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0804087 Jy ! Component: 100 - total flux cleaned = 0.126983 Jy ! Component: 150 - total flux cleaned = 0.155231 Jy ! Component: 200 - total flux cleaned = 0.172381 Jy ! Total flux subtracted in 200 components = 0.172381 Jy ! Clean residual min=-0.019790 max=0.032905 Jy/beam ! Clean residual mean=-0.000286 rms=0.008571 Jy/beam ! Combined flux in latest and established models = 0.510052 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 55 components and 0.510052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107906Jy sigma=0.001249 ! Fit after self-cal, rms=0.107625Jy sigma=0.001245 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.95 KP 1.02 ! LA 1.50 MK 1.05 NL 0.87 OV 0.87 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.04 KP 0.96 ! LA 1.52 MK 1.04 NL 1.05 OV 0.91 ! PT 0.93 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.04 KP 0.84 ! LA 1.22 MK 1.06 NL 1.39 OV 0.84 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.98 KP 0.78 ! LA 1.32 MK 1.03 NL 0.92 OV 0.91 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.107625Jy sigma=0.001245 ! Fit after self-cal, rms=0.077099Jy sigma=0.000813 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=10.33 mas, bpa=-55.59 degrees ! Estimated noise=767.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612924 Jy ! Component: 100 - total flux cleaned = 0.00762509 Jy ! Component: 150 - total flux cleaned = 0.00727036 Jy ! Component: 200 - total flux cleaned = 0.00665182 Jy ! Total flux subtracted in 200 components = 0.00665182 Jy ! Clean residual min=-0.007741 max=0.008623 Jy/beam ! Clean residual mean=0.000003 rms=0.002093 Jy/beam ! Combined flux in latest and established models = 0.516704 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.516704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075820Jy sigma=0.000792 ! Fit after self-cal, rms=0.076113Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076113Jy sigma=0.000791 ! Fit after self-cal, rms=0.075951Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=10.31 mas, bpa=-55.72 degrees ! Estimated noise=766.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268827 Jy ! Component: 100 - total flux cleaned = 0.00321933 Jy ! Component: 150 - total flux cleaned = 0.00289718 Jy ! Component: 200 - total flux cleaned = 0.00242248 Jy ! Total flux subtracted in 200 components = 0.00242248 Jy ! Clean residual min=-0.007174 max=0.007554 Jy/beam ! Clean residual mean=0.000007 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.519126 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.519126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075602Jy sigma=0.000783 ! Fit after self-cal, rms=0.075603Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.99234e-05 Jy ! Component: 100 - total flux cleaned = -0.00024051 Jy ! Component: 150 - total flux cleaned = -0.000513771 Jy ! Component: 200 - total flux cleaned = -0.000753788 Jy ! Total flux subtracted in 200 components = -0.000753788 Jy ! Clean residual min=-0.007070 max=0.007235 Jy/beam ! Clean residual mean=0.000007 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.518372 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.518372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075484Jy sigma=0.000781 ! Fit after self-cal, rms=0.075488Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075488Jy sigma=0.000781 ! Fit after self-cal, rms=0.075440Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=10.3 mas, bpa=-55.78 degrees ! Estimated noise=765.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105825 Jy ! Component: 100 - total flux cleaned = 0.00124261 Jy ! Component: 150 - total flux cleaned = 0.00118677 Jy ! Component: 200 - total flux cleaned = 0.00123498 Jy ! Total flux subtracted in 200 components = 0.00123498 Jy ! Clean residual min=-0.006663 max=0.007043 Jy/beam ! Clean residual mean=0.000012 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.519607 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.519607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075368Jy sigma=0.000779 ! Fit after self-cal, rms=0.075373Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144791 Jy ! Component: 100 - total flux cleaned = -0.000226222 Jy ! Component: 150 - total flux cleaned = -0.000376962 Jy ! Component: 200 - total flux cleaned = -0.000516178 Jy ! Total flux subtracted in 200 components = -0.000516178 Jy ! Clean residual min=-0.006617 max=0.006892 Jy/beam ! Clean residual mean=0.000012 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.519091 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.519091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075336Jy sigma=0.000779 ! Fit after self-cal, rms=0.075341Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075341Jy sigma=0.000779 ! Fit after self-cal, rms=0.075370Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.546 mas, bmaj=11.4 mas, bpa=-75.46 degrees ! Estimated noise=935.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671873 Jy ! Component: 100 - total flux cleaned = 0.000924561 Jy ! Component: 150 - total flux cleaned = 0.00101939 Jy ! Component: 200 - total flux cleaned = 0.00104002 Jy ! Total flux subtracted in 200 components = 0.00104002 Jy ! Clean residual min=-0.008099 max=0.008922 Jy/beam ! Clean residual mean=0.000026 rms=0.002785 Jy/beam ! Combined flux in latest and established models = 0.520131 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.520131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075354Jy sigma=0.000778 ! Fit after self-cal, rms=0.075363Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.82669e-05 Jy ! Component: 100 - total flux cleaned = -8.89285e-05 Jy ! Component: 150 - total flux cleaned = -0.000123468 Jy ! Component: 200 - total flux cleaned = -0.000139138 Jy ! Total flux subtracted in 200 components = -0.000139138 Jy ! Clean residual min=-0.008090 max=0.008880 Jy/beam ! Clean residual mean=0.000026 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.519992 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.519992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075349Jy sigma=0.000778 ! Fit after self-cal, rms=0.075356Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=10.29 mas, bpa=-55.81 degrees ! Estimated noise=765.804 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 10.29 at -55.81 degrees (North through East) ! Clean map min=-0.0065223 max=0.30379 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=10.12 mas, bpa=-54.27 degrees ! Estimated noise=1236.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231157 Jy ! Component: 100 - total flux cleaned = 0.328727 Jy ! Component: 150 - total flux cleaned = 0.38678 Jy ! Component: 200 - total flux cleaned = 0.425404 Jy ! Total flux subtracted in 200 components = 0.425404 Jy ! Clean residual min=-0.012938 max=0.023836 Jy/beam ! Clean residual mean=-0.000051 rms=0.005054 Jy/beam ! Combined flux in latest and established models = 0.425404 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.425404 Jy ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=10.29 mas, bpa=-55.81 degrees ! Estimated noise=765.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371662 Jy ! Component: 100 - total flux cleaned = 0.0582677 Jy ! Component: 150 - total flux cleaned = 0.0709703 Jy ! Component: 200 - total flux cleaned = 0.0788265 Jy ! Total flux subtracted in 200 components = 0.0788265 Jy ! Clean residual min=-0.008194 max=0.006452 Jy/beam ! Clean residual mean=-0.000004 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.50423 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 98 components and 0.50423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.546 mas, bmaj=11.4 mas, bpa=-75.46 degrees ! Estimated noise=935.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796042 Jy ! Component: 100 - total flux cleaned = 0.0103944 Jy ! Component: 150 - total flux cleaned = 0.0112528 Jy ! Component: 200 - total flux cleaned = 0.0118049 Jy ! Total flux subtracted in 200 components = 0.0118049 Jy ! Clean residual min=-0.009140 max=0.008464 Jy/beam ! Clean residual mean=0.000011 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 0.516035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.08113e-05 Jy ! Component: 100 - total flux cleaned = 0.000327621 Jy ! Component: 150 - total flux cleaned = 0.000395775 Jy ! Component: 200 - total flux cleaned = 0.000519286 Jy ! Total flux subtracted in 200 components = 0.000519286 Jy ! Clean residual min=-0.008458 max=0.008557 Jy/beam ! Clean residual mean=0.000013 rms=0.002759 Jy/beam ! Combined flux in latest and established models = 0.516554 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 157 components and 0.516554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=10.29 mas, bpa=-55.81 degrees ! Estimated noise=765.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000810625 Jy ! Component: 100 - total flux cleaned = -0.000313007 Jy ! Component: 150 - total flux cleaned = -0.000164149 Jy ! Component: 200 - total flux cleaned = -0.000166081 Jy ! Total flux subtracted in 200 components = -0.000166081 Jy ! Clean residual min=-0.006138 max=0.006170 Jy/beam ! Clean residual mean=0.000007 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.516388 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 184 components and 0.516388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075370Jy sigma=0.000778 ! Fit after self-cal, rms=0.075173Jy sigma=0.000775 wmodel J1109+3744_S_2015_01_22_pus_map.mod ! Writing 184 model components to file: J1109+3744_S_2015_01_22_pus_map.mod wobs J1109+3744_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1109+3744_S_2015_01_22_pus_uvs.fits wwins J1109+3744_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1109+3744_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.93898e-05 Jy ! Component: 100 - total flux cleaned = -0.000396365 Jy ! Component: 150 - total flux cleaned = -0.000615024 Jy ! Component: 200 - total flux cleaned = -0.000882898 Jy ! Component: 250 - total flux cleaned = -0.00118554 Jy ! Component: 300 - total flux cleaned = -0.00146345 Jy ! Component: 350 - total flux cleaned = -0.00156533 Jy ! Component: 400 - total flux cleaned = -0.0018596 Jy ! Component: 450 - total flux cleaned = -0.00213849 Jy ! Component: 500 - total flux cleaned = -0.00227025 Jy ! Component: 550 - total flux cleaned = -0.00248197 Jy ! Component: 600 - total flux cleaned = -0.00252307 Jy ! Component: 650 - total flux cleaned = -0.00248508 Jy ! Component: 700 - total flux cleaned = -0.0024483 Jy ! Component: 750 - total flux cleaned = -0.00234192 Jy ! Component: 800 - total flux cleaned = -0.00223989 Jy ! Component: 850 - total flux cleaned = -0.00223996 Jy ! Component: 900 - total flux cleaned = -0.00227044 Jy ! Component: 950 - total flux cleaned = -0.00217743 Jy ! Component: 1000 - total flux cleaned = -0.00217812 Jy ! Component: 1050 - total flux cleaned = -0.00223628 Jy ! Component: 1100 - total flux cleaned = -0.00229246 Jy ! Component: 1150 - total flux cleaned = -0.00240033 Jy ! Component: 1200 - total flux cleaned = -0.00242618 Jy ! Component: 1250 - total flux cleaned = -0.00250308 Jy ! Component: 1300 - total flux cleaned = -0.00260234 Jy ! Component: 1350 - total flux cleaned = -0.0026263 Jy ! Component: 1400 - total flux cleaned = -0.00267365 Jy ! Component: 1450 - total flux cleaned = -0.0026275 Jy ! Component: 1500 - total flux cleaned = -0.00260552 Jy ! Component: 1550 - total flux cleaned = -0.00258342 Jy ! Component: 1600 - total flux cleaned = -0.00249724 Jy ! Component: 1650 - total flux cleaned = -0.00247591 Jy ! Component: 1700 - total flux cleaned = -0.00239285 Jy ! Component: 1750 - total flux cleaned = -0.0023312 Jy ! Component: 1800 - total flux cleaned = -0.00223136 Jy ! Component: 1850 - total flux cleaned = -0.00215312 Jy ! Component: 1900 - total flux cleaned = -0.00217285 Jy ! Component: 1950 - total flux cleaned = -0.00211604 Jy ! Component: 2000 - total flux cleaned = -0.00202237 Jy ! Component: 2050 - total flux cleaned = -0.00205945 Jy ! Component: 2100 - total flux cleaned = -0.00200446 Jy ! Component: 2150 - total flux cleaned = -0.00195034 Jy ! Component: 2200 - total flux cleaned = -0.00196804 Jy ! Component: 2250 - total flux cleaned = -0.00193303 Jy ! Component: 2300 - total flux cleaned = -0.00188109 Jy ! Component: 2350 - total flux cleaned = -0.00189829 Jy ! Component: 2400 - total flux cleaned = -0.00188125 Jy ! Component: 2450 - total flux cleaned = -0.00191476 Jy ! Component: 2500 - total flux cleaned = -0.00189801 Jy ! Component: 2550 - total flux cleaned = -0.00193103 Jy ! Component: 2600 - total flux cleaned = -0.00194736 Jy ! Component: 2650 - total flux cleaned = -0.00199573 Jy ! Component: 2700 - total flux cleaned = -0.00199556 Jy ! Component: 2750 - total flux cleaned = -0.00199553 Jy ! Component: 2800 - total flux cleaned = -0.00204264 Jy ! Component: 2850 - total flux cleaned = -0.00204261 Jy ! Component: 2900 - total flux cleaned = -0.00204267 Jy ! Component: 2950 - total flux cleaned = -0.00208875 Jy ! Component: 3000 - total flux cleaned = -0.00208859 Jy ! Component: 3050 - total flux cleaned = -0.00207355 Jy ! Component: 3100 - total flux cleaned = -0.00210346 Jy ! Component: 3150 - total flux cleaned = -0.00208854 Jy ! Component: 3200 - total flux cleaned = -0.00211827 Jy ! Component: 3250 - total flux cleaned = -0.00216254 Jy ! Component: 3300 - total flux cleaned = -0.00219211 Jy ! Component: 3350 - total flux cleaned = -0.00223594 Jy ! Component: 3400 - total flux cleaned = -0.00225051 Jy ! Component: 3450 - total flux cleaned = -0.00227938 Jy ! Component: 3500 - total flux cleaned = -0.00226487 Jy ! Component: 3550 - total flux cleaned = -0.00226491 Jy ! Component: 3600 - total flux cleaned = -0.0022793 Jy ! Component: 3650 - total flux cleaned = -0.00227939 Jy ! Component: 3700 - total flux cleaned = -0.00227938 Jy ! Component: 3750 - total flux cleaned = -0.00229358 Jy ! Component: 3800 - total flux cleaned = -0.0023221 Jy ! Component: 3850 - total flux cleaned = -0.0023649 Jy ! Component: 3900 - total flux cleaned = -0.00235071 Jy ! Component: 3950 - total flux cleaned = -0.00240777 Jy ! Component: 4000 - total flux cleaned = -0.00243624 Jy ! Component: 4050 - total flux cleaned = -0.0024362 Jy ! Total flux subtracted in 4096 components = -0.00246475 Jy ! Clean residual min=-0.000891 max=0.000800 Jy/beam ! Clean residual mean=0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.513924 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 529 components and 0.513924 Jy ![Exited script file: muppet] wmap "J1109+3744_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 10.29 at -55.81 degrees (North through East) ! Clean map min=-0.0037683 max=0.29704 Jy/beam ! Writing clean map to FITS file: J1109+3744_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297044 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265903 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.268549 0.268549 0.537098 1.0742 2.14839 4.29679 8.59357 17.1871 34.3743 68.7486 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 10.29 at -55.81 degrees (North through East) ! Clean map min=-0.0037683 max=0.29704 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1109+3744_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:50:54 2017