! Started logfile: J1108+0202_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:54 2017 obs J1108+0202_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1108+0202_S_2014_01_04_pus_uva.fits ! AN table 1: 159 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1108+0202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1108+0202_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939746Jy sigma=0.013735 ! Fit after self-cal, rms=0.905200Jy sigma=0.013029 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.653 mas, bmaj=6.35 mas, bpa=1.602 degrees ! Estimated noise=793.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722884 Jy ! Component: 100 - total flux cleaned = 0.0881594 Jy ! Total flux subtracted in 100 components = 0.0881594 Jy ! Clean residual min=-0.005256 max=0.005254 Jy/beam ! Clean residual mean=-0.000036 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.0881594 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0881594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070289Jy sigma=0.000933 ! Fit after self-cal, rms=0.070328Jy sigma=0.000932 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.159 mas, bmaj=7.491 mas, bpa=10.73 degrees ! Estimated noise=522.986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716571 Jy ! Component: 100 - total flux cleaned = 0.0101672 Jy ! Component: 150 - total flux cleaned = 0.0120479 Jy ! Component: 200 - total flux cleaned = 0.0126402 Jy ! Total flux subtracted in 200 components = 0.0126402 Jy ! Clean residual min=-0.003494 max=0.005198 Jy/beam ! Clean residual mean=-0.000028 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.1008 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.1008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069523Jy sigma=0.000924 ! Fit after self-cal, rms=0.069530Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.02 ! MK 0.99 NL 1.03 OV 0.99 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 1.03 ! MK 1.01 NL 1.11 OV 1.01 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.79 ! MK 1.02 NL 1.08 OV 0.95 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.89 ! MK 1.03 NL 1.18 OV 1.04 PT 1.00 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.069530Jy sigma=0.000924 ! Fit after self-cal, rms=0.068136Jy sigma=0.000912 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.149 mas, bmaj=7.54 mas, bpa=11.45 degrees ! Estimated noise=523.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271624 Jy ! Component: 100 - total flux cleaned = -0.000237949 Jy ! Component: 150 - total flux cleaned = -0.000238206 Jy ! Component: 200 - total flux cleaned = -0.000211236 Jy ! Total flux subtracted in 200 components = -0.000211236 Jy ! Clean residual min=-0.002906 max=0.003582 Jy/beam ! Clean residual mean=-0.000002 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.100588 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.100588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068108Jy sigma=0.000911 ! Fit after self-cal, rms=0.068067Jy sigma=0.000911 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068067Jy sigma=0.000911 ! Fit after self-cal, rms=0.067837Jy sigma=0.000908 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=7.541 mas, bpa=11.5 degrees ! Estimated noise=523.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167017 Jy ! Component: 100 - total flux cleaned = -0.000247118 Jy ! Component: 150 - total flux cleaned = -0.000322815 Jy ! Component: 200 - total flux cleaned = -0.000395002 Jy ! Total flux subtracted in 200 components = -0.000395002 Jy ! Clean residual min=-0.002360 max=0.002944 Jy/beam ! Clean residual mean=-0.000019 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.100193 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.100193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067829Jy sigma=0.000908 ! Fit after self-cal, rms=0.067825Jy sigma=0.000908 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216151 Jy ! Component: 100 - total flux cleaned = 0.00211952 Jy ! Component: 150 - total flux cleaned = 0.00208217 Jy ! Component: 200 - total flux cleaned = 0.00208259 Jy ! Total flux subtracted in 200 components = 0.00208259 Jy ! Clean residual min=-0.001922 max=0.001896 Jy/beam ! Clean residual mean=-0.000014 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.102276 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.102276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067727Jy sigma=0.000907 ! Fit after self-cal, rms=0.067709Jy sigma=0.000907 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067709Jy sigma=0.000907 ! Fit after self-cal, rms=0.067227Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.139 mas, bmaj=7.538 mas, bpa=11.44 degrees ! Estimated noise=521.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440369 Jy ! Component: 100 - total flux cleaned = 0.000310316 Jy ! Component: 150 - total flux cleaned = 0.000177772 Jy ! Component: 200 - total flux cleaned = 0.000103346 Jy ! Total flux subtracted in 200 components = 0.000103346 Jy ! Clean residual min=-0.001746 max=0.001659 Jy/beam ! Clean residual mean=-0.000009 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.102379 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.102379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067206Jy sigma=0.000906 ! Fit after self-cal, rms=0.067172Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09241e-05 Jy ! Component: 100 - total flux cleaned = -2.16602e-05 Jy ! Component: 150 - total flux cleaned = -6.66135e-05 Jy ! Component: 200 - total flux cleaned = -0.000135213 Jy ! Total flux subtracted in 200 components = -0.000135213 Jy ! Clean residual min=-0.001692 max=0.001632 Jy/beam ! Clean residual mean=-0.000010 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.102244 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.102244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067165Jy sigma=0.000906 ! Fit after self-cal, rms=0.067164Jy sigma=0.000906 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067164Jy sigma=0.000906 ! Fit after self-cal, rms=0.067001Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.493 mas, bmaj=12.2 mas, bpa=11.25 degrees ! Estimated noise=598.626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319022 Jy ! Component: 100 - total flux cleaned = -0.00047991 Jy ! Component: 150 - total flux cleaned = -0.000527311 Jy ! Component: 200 - total flux cleaned = -0.000569274 Jy ! Total flux subtracted in 200 components = -0.000569274 Jy ! Clean residual min=-0.001492 max=0.001553 Jy/beam ! Clean residual mean=-0.000014 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.101675 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 137 components and 0.101675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066997Jy sigma=0.000906 ! Fit after self-cal, rms=0.066984Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95296e-05 Jy ! Component: 100 - total flux cleaned = -7.86772e-05 Jy ! Component: 150 - total flux cleaned = -9.69751e-05 Jy ! Component: 200 - total flux cleaned = -0.000122523 Jy ! Total flux subtracted in 200 components = -0.000122523 Jy ! Clean residual min=-0.001459 max=0.001507 Jy/beam ! Clean residual mean=-0.000014 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.101552 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 143 components and 0.101552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066983Jy sigma=0.000906 ! Fit after self-cal, rms=0.066987Jy sigma=0.000906 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.139 mas, bmaj=7.536 mas, bpa=11.34 degrees ! Estimated noise=520.912 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.139 x 7.536 at 11.34 degrees (North through East) ! Clean map min=-0.0023024 max=0.095061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=6.345 mas, bpa=2.19 degrees ! Estimated noise=806.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735214 Jy ! Component: 100 - total flux cleaned = 0.0897504 Jy ! Component: 150 - total flux cleaned = 0.095342 Jy ! Component: 200 - total flux cleaned = 0.0970838 Jy ! Total flux subtracted in 200 components = 0.0970838 Jy ! Clean residual min=-0.003431 max=0.002894 Jy/beam ! Clean residual mean=-0.000012 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0970838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0970838 Jy ! Inverting map and beam ! Estimated beam: bmin=4.139 mas, bmaj=7.536 mas, bpa=11.34 degrees ! Estimated noise=520.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277019 Jy ! Component: 100 - total flux cleaned = 0.00409767 Jy ! Component: 150 - total flux cleaned = 0.0047395 Jy ! Component: 200 - total flux cleaned = 0.00477905 Jy ! Total flux subtracted in 200 components = 0.00477905 Jy ! Clean residual min=-0.001786 max=0.001709 Jy/beam ! Clean residual mean=-0.000008 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.101863 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.101863 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.493 mas, bmaj=12.2 mas, bpa=11.25 degrees ! Estimated noise=598.626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211533 Jy ! Component: 100 - total flux cleaned = 0.000223247 Jy ! Component: 150 - total flux cleaned = 0.00015206 Jy ! Component: 200 - total flux cleaned = 8.85081e-05 Jy ! Total flux subtracted in 200 components = 8.85081e-05 Jy ! Clean residual min=-0.001455 max=0.001626 Jy/beam ! Clean residual mean=-0.000013 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.101951 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43406e-05 Jy ! Component: 100 - total flux cleaned = -8.63752e-05 Jy ! Component: 150 - total flux cleaned = -0.000125923 Jy ! Component: 200 - total flux cleaned = -0.000163515 Jy ! Total flux subtracted in 200 components = -0.000163515 Jy ! Clean residual min=-0.001407 max=0.001596 Jy/beam ! Clean residual mean=-0.000013 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.101788 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 80 components and 0.101788 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.139 mas, bmaj=7.536 mas, bpa=11.34 degrees ! Estimated noise=520.912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.10643e-05 Jy ! Component: 100 - total flux cleaned = 0.000106769 Jy ! Component: 150 - total flux cleaned = 8.55882e-05 Jy ! Component: 200 - total flux cleaned = 8.51516e-05 Jy ! Total flux subtracted in 200 components = 8.51516e-05 Jy ! Clean residual min=-0.001665 max=0.001606 Jy/beam ! Clean residual mean=-0.000007 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.101873 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.101873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066996Jy sigma=0.000906 ! Fit after self-cal, rms=0.066997Jy sigma=0.000906 wmodel J1108+0202_S_2014_01_04_pus_map.mod ! Writing 97 model components to file: J1108+0202_S_2014_01_04_pus_map.mod wobs J1108+0202_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1108+0202_S_2014_01_04_pus_uvs.fits wwins J1108+0202_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1108+0202_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.96872e-05 Jy ! Component: 100 - total flux cleaned = 4.94797e-05 Jy ! Component: 150 - total flux cleaned = 0.000227283 Jy ! Component: 200 - total flux cleaned = 0.000274579 Jy ! Component: 250 - total flux cleaned = 0.000319695 Jy ! Component: 300 - total flux cleaned = 0.000319775 Jy ! Component: 350 - total flux cleaned = 0.000361101 Jy ! Component: 400 - total flux cleaned = 0.000361075 Jy ! Component: 450 - total flux cleaned = 0.000304668 Jy ! Component: 500 - total flux cleaned = 0.000232605 Jy ! Component: 550 - total flux cleaned = 0.000197277 Jy ! Component: 600 - total flux cleaned = 0.000146655 Jy ! Component: 650 - total flux cleaned = 8.0936e-05 Jy ! Component: 700 - total flux cleaned = -1.46876e-05 Jy ! Component: 750 - total flux cleaned = -0.000123066 Jy ! Component: 800 - total flux cleaned = -0.000243661 Jy ! Component: 850 - total flux cleaned = -0.000346518 Jy ! Component: 900 - total flux cleaned = -0.000475672 Jy ! Component: 950 - total flux cleaned = -0.000587733 Jy ! Component: 1000 - total flux cleaned = -0.000697647 Jy ! Component: 1050 - total flux cleaned = -0.00079173 Jy ! Component: 1100 - total flux cleaned = -0.000883762 Jy ! Component: 1150 - total flux cleaned = -0.000999371 Jy ! Component: 1200 - total flux cleaned = -0.0010875 Jy ! Component: 1250 - total flux cleaned = -0.00119875 Jy ! Component: 1300 - total flux cleaned = -0.00133206 Jy ! Component: 1350 - total flux cleaned = -0.00142723 Jy ! Component: 1400 - total flux cleaned = -0.00153273 Jy ! Component: 1450 - total flux cleaned = -0.00163615 Jy ! Component: 1500 - total flux cleaned = -0.00169285 Jy ! Component: 1550 - total flux cleaned = -0.00173768 Jy ! Component: 1600 - total flux cleaned = -0.00183659 Jy ! Component: 1650 - total flux cleaned = -0.00185807 Jy ! Component: 1700 - total flux cleaned = -0.00193269 Jy ! Component: 1750 - total flux cleaned = -0.00201662 Jy ! Component: 1800 - total flux cleaned = -0.00209945 Jy ! Component: 1850 - total flux cleaned = -0.00219153 Jy ! Component: 1900 - total flux cleaned = -0.00226225 Jy ! Component: 1950 - total flux cleaned = -0.00235186 Jy ! Component: 2000 - total flux cleaned = -0.00243053 Jy ! Component: 2050 - total flux cleaned = -0.00248872 Jy ! Component: 2100 - total flux cleaned = -0.00253677 Jy ! Component: 2150 - total flux cleaned = -0.0025842 Jy ! Component: 2200 - total flux cleaned = -0.00261225 Jy ! Component: 2250 - total flux cleaned = -0.00262144 Jy ! Component: 2300 - total flux cleaned = -0.00262148 Jy ! Component: 2350 - total flux cleaned = -0.00267589 Jy ! Component: 2400 - total flux cleaned = -0.00269387 Jy ! Component: 2450 - total flux cleaned = -0.00271167 Jy ! Component: 2500 - total flux cleaned = -0.00272048 Jy ! Component: 2550 - total flux cleaned = -0.00271188 Jy ! Component: 2600 - total flux cleaned = -0.0027379 Jy ! Component: 2650 - total flux cleaned = -0.00273793 Jy ! Component: 2700 - total flux cleaned = -0.002738 Jy ! Component: 2750 - total flux cleaned = -0.00274645 Jy ! Component: 2800 - total flux cleaned = -0.00278819 Jy ! Component: 2850 - total flux cleaned = -0.00274662 Jy ! Component: 2900 - total flux cleaned = -0.00277141 Jy ! Component: 2950 - total flux cleaned = -0.00278778 Jy ! Component: 3000 - total flux cleaned = -0.00277146 Jy ! Component: 3050 - total flux cleaned = -0.00276339 Jy ! Component: 3100 - total flux cleaned = -0.00277948 Jy ! Component: 3150 - total flux cleaned = -0.00277144 Jy ! Component: 3200 - total flux cleaned = -0.00274756 Jy ! Component: 3250 - total flux cleaned = -0.00273179 Jy ! Component: 3300 - total flux cleaned = -0.00271606 Jy ! Component: 3350 - total flux cleaned = -0.00270037 Jy ! Component: 3400 - total flux cleaned = -0.00270816 Jy ! Component: 3450 - total flux cleaned = -0.0026848 Jy ! Component: 3500 - total flux cleaned = -0.00266933 Jy ! Component: 3550 - total flux cleaned = -0.0026539 Jy ! Component: 3600 - total flux cleaned = -0.00263084 Jy ! Component: 3650 - total flux cleaned = -0.00262318 Jy ! Component: 3700 - total flux cleaned = -0.00261558 Jy ! Component: 3750 - total flux cleaned = -0.00261555 Jy ! Component: 3800 - total flux cleaned = -0.00257766 Jy ! Component: 3850 - total flux cleaned = -0.00260036 Jy ! Component: 3900 - total flux cleaned = -0.00257024 Jy ! Component: 3950 - total flux cleaned = -0.00256272 Jy ! Component: 4000 - total flux cleaned = -0.00253273 Jy ! Component: 4050 - total flux cleaned = -0.0025103 Jy ! Total flux subtracted in 4096 components = -0.00249545 Jy ! Clean residual min=-0.000473 max=0.000458 Jy/beam ! Clean residual mean=-0.000001 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0993776 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 323 components and 0.0993776 Jy ![Exited script file: muppet] wmap "J1108+0202_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.139 x 7.536 at 11.34 degrees (North through East) ! Clean map min=-0.0018818 max=0.095803 Jy/beam ! Writing clean map to FITS file: J1108+0202_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0958027 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.389113 0.389113 0.778226 1.55645 3.1129 6.22581 12.4516 24.9032 49.8065 99.6129 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.139 x 7.536 at 11.34 degrees (North through East) ! Clean map min=-0.0018818 max=0.095803 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1108+0202_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:59 2017