! Started logfile: J1107-1226_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:22:37 2017 obs J1107-1226_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1107-1226_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976321 visibilities/baseline/integration-bin. ! Found source: J1107-1226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1107-1226_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981604Jy sigma=0.009509 ! Fit after self-cal, rms=0.941360Jy sigma=0.009247 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.442 mas, bpa=-3.767 degrees ! Estimated noise=833.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488765 Jy ! Component: 100 - total flux cleaned = 0.0597014 Jy ! Total flux subtracted in 100 components = 0.0597014 Jy ! Clean residual min=-0.003364 max=0.003997 Jy/beam ! Clean residual mean=0.000008 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0597014 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0597014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126838Jy sigma=0.000789 ! Fit after self-cal, rms=0.126681Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.459 mas, bpa=-4.46 degrees ! Estimated noise=515.988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046929 Jy ! Component: 100 - total flux cleaned = 0.00676083 Jy ! Component: 150 - total flux cleaned = 0.00738511 Jy ! Component: 200 - total flux cleaned = 0.00750684 Jy ! Total flux subtracted in 200 components = 0.00750684 Jy ! Clean residual min=-0.003558 max=0.003136 Jy/beam ! Clean residual mean=0.000009 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0672082 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.0672082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126367Jy sigma=0.000786 ! Fit after self-cal, rms=0.126349Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.92 KP 1.12 ! LA 1.29 MK 1.05 NL 0.94 OV 1.00 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.16 HN 1.02 KP 0.96 ! LA 1.25 MK 1.00 NL 0.93 OV 1.04 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 0.92 KP 0.88 ! LA 1.06 MK 1.04 NL 1.08 OV 0.93 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 0.99 KP 0.82 ! LA 1.12 MK 1.10 NL 1.05 OV 0.96 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.126349Jy sigma=0.000786 ! Fit after self-cal, rms=0.133896Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=7.477 mas, bpa=-4.198 degrees ! Estimated noise=523.244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128424 Jy ! Component: 100 - total flux cleaned = 0.00166519 Jy ! Component: 150 - total flux cleaned = 0.00174651 Jy ! Component: 200 - total flux cleaned = 0.00178759 Jy ! Total flux subtracted in 200 components = 0.00178759 Jy ! Clean residual min=-0.003509 max=0.002523 Jy/beam ! Clean residual mean=0.000007 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0689958 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.0689958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133843Jy sigma=0.000783 ! Fit after self-cal, rms=0.133980Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133980Jy sigma=0.000782 ! Fit after self-cal, rms=0.123192Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.433 mas, bpa=-4.084 degrees ! Estimated noise=534.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131801 Jy ! Component: 100 - total flux cleaned = 0.00194261 Jy ! Component: 150 - total flux cleaned = 0.00219199 Jy ! Component: 200 - total flux cleaned = 0.00226327 Jy ! Total flux subtracted in 200 components = 0.00226327 Jy ! Clean residual min=-0.002328 max=0.001637 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0712591 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.0712591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123158Jy sigma=0.000777 ! Fit after self-cal, rms=0.123190Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.93408e-05 Jy ! Component: 100 - total flux cleaned = 0.000129962 Jy ! Component: 150 - total flux cleaned = 0.000173034 Jy ! Component: 200 - total flux cleaned = 0.000188459 Jy ! Total flux subtracted in 200 components = 0.000188459 Jy ! Clean residual min=-0.002475 max=0.001661 Jy/beam ! Clean residual mean=0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0714476 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0714476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123187Jy sigma=0.000776 ! Fit after self-cal, rms=0.123186Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123186Jy sigma=0.000776 ! Fit after self-cal, rms=0.114285Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.431 mas, bpa=-3.972 degrees ! Estimated noise=534.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016567 Jy ! Component: 100 - total flux cleaned = 0.000176263 Jy ! Component: 150 - total flux cleaned = 0.000162784 Jy ! Component: 200 - total flux cleaned = 0.000156716 Jy ! Total flux subtracted in 200 components = 0.000156716 Jy ! Clean residual min=-0.001572 max=0.001463 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0716043 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0716043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114282Jy sigma=0.000775 ! Fit after self-cal, rms=0.114160Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.72914e-05 Jy ! Component: 100 - total flux cleaned = 7.88156e-05 Jy ! Component: 150 - total flux cleaned = 8.94459e-05 Jy ! Component: 200 - total flux cleaned = 9.45611e-05 Jy ! Total flux subtracted in 200 components = 9.45611e-05 Jy ! Clean residual min=-0.001559 max=0.001480 Jy/beam ! Clean residual mean=0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0716988 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0716988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114160Jy sigma=0.000775 ! Fit after self-cal, rms=0.114158Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114158Jy sigma=0.000775 ! Fit after self-cal, rms=0.113708Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.087 mas, bmaj=13.44 mas, bpa=-2.594 degrees ! Estimated noise=734.739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018048 Jy ! Component: 100 - total flux cleaned = 0.00016193 Jy ! Component: 150 - total flux cleaned = 0.000145523 Jy ! Component: 200 - total flux cleaned = 0.000130125 Jy ! Total flux subtracted in 200 components = 0.000130125 Jy ! Clean residual min=-0.001432 max=0.001635 Jy/beam ! Clean residual mean=0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.071829 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.071829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113707Jy sigma=0.000775 ! Fit after self-cal, rms=0.113690Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.71861e-05 Jy ! Component: 100 - total flux cleaned = 1.39076e-05 Jy ! Component: 150 - total flux cleaned = -2.38941e-07 Jy ! Component: 200 - total flux cleaned = -6.86018e-06 Jy ! Total flux subtracted in 200 components = -6.86018e-06 Jy ! Clean residual min=-0.001414 max=0.001661 Jy/beam ! Clean residual mean=0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0718221 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.0718221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113689Jy sigma=0.000775 ! Fit after self-cal, rms=0.113687Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.423 mas, bpa=-3.826 degrees ! Estimated noise=534.885 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.423 at -3.826 degrees (North through East) ! Clean map min=-0.0015019 max=0.065831 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.404 mas, bpa=-3.221 degrees ! Estimated noise=867.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507365 Jy ! Component: 100 - total flux cleaned = 0.062578 Jy ! Component: 150 - total flux cleaned = 0.0673254 Jy ! Component: 200 - total flux cleaned = 0.0699266 Jy ! Total flux subtracted in 200 components = 0.0699266 Jy ! Clean residual min=-0.002518 max=0.002741 Jy/beam ! Clean residual mean=0.000001 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0699266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0699266 Jy ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.423 mas, bpa=-3.826 degrees ! Estimated noise=534.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106993 Jy ! Component: 100 - total flux cleaned = 0.00130312 Jy ! Component: 150 - total flux cleaned = 0.00146254 Jy ! Component: 200 - total flux cleaned = 0.00159248 Jy ! Total flux subtracted in 200 components = 0.00159248 Jy ! Clean residual min=-0.001654 max=0.001558 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.071519 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 0.0715191 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.087 mas, bmaj=13.44 mas, bpa=-2.594 degrees ! Estimated noise=734.739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314229 Jy ! Component: 100 - total flux cleaned = 0.00032973 Jy ! Component: 150 - total flux cleaned = 0.000355384 Jy ! Component: 200 - total flux cleaned = 0.000344439 Jy ! Total flux subtracted in 200 components = 0.000344439 Jy ! Clean residual min=-0.001471 max=0.001646 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0718635 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.06361e-05 Jy ! Component: 100 - total flux cleaned = -2.99042e-05 Jy ! Component: 150 - total flux cleaned = -4.80907e-05 Jy ! Component: 200 - total flux cleaned = -6.53017e-05 Jy ! Total flux subtracted in 200 components = -6.53017e-05 Jy ! Clean residual min=-0.001435 max=0.001656 Jy/beam ! Clean residual mean=0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0717982 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0717982 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.423 mas, bpa=-3.826 degrees ! Estimated noise=534.885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160288 Jy ! Component: 100 - total flux cleaned = -0.000125201 Jy ! Component: 150 - total flux cleaned = -8.45812e-05 Jy ! Component: 200 - total flux cleaned = -4.80361e-05 Jy ! Total flux subtracted in 200 components = -4.80361e-05 Jy ! Clean residual min=-0.001562 max=0.001505 Jy/beam ! Clean residual mean=0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0717502 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.0717502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113690Jy sigma=0.000775 ! Fit after self-cal, rms=0.113684Jy sigma=0.000775 wmodel J1107-1226_S_2015_01_23_pus_map.mod ! Writing 58 model components to file: J1107-1226_S_2015_01_23_pus_map.mod wobs J1107-1226_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1107-1226_S_2015_01_23_pus_uvs.fits wwins J1107-1226_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1107-1226_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380323 Jy ! Component: 100 - total flux cleaned = -0.000512728 Jy ! Component: 150 - total flux cleaned = -0.000614738 Jy ! Component: 200 - total flux cleaned = -0.000638869 Jy ! Component: 250 - total flux cleaned = -0.000709776 Jy ! Component: 300 - total flux cleaned = -0.000779163 Jy ! Component: 350 - total flux cleaned = -0.000869778 Jy ! Component: 400 - total flux cleaned = -0.000936384 Jy ! Component: 450 - total flux cleaned = -0.00104414 Jy ! Component: 500 - total flux cleaned = -0.00110756 Jy ! Component: 550 - total flux cleaned = -0.00110739 Jy ! Component: 600 - total flux cleaned = -0.00112752 Jy ! Component: 650 - total flux cleaned = -0.00110737 Jy ! Component: 700 - total flux cleaned = -0.0011468 Jy ! Component: 750 - total flux cleaned = -0.00120489 Jy ! Component: 800 - total flux cleaned = -0.00122379 Jy ! Component: 850 - total flux cleaned = -0.00126151 Jy ! Component: 900 - total flux cleaned = -0.00131724 Jy ! Component: 950 - total flux cleaned = -0.00131725 Jy ! Component: 1000 - total flux cleaned = -0.00138991 Jy ! Component: 1050 - total flux cleaned = -0.00144386 Jy ! Component: 1100 - total flux cleaned = -0.00144409 Jy ! Component: 1150 - total flux cleaned = -0.00153137 Jy ! Component: 1200 - total flux cleaned = -0.00151403 Jy ! Component: 1250 - total flux cleaned = -0.00159933 Jy ! Component: 1300 - total flux cleaned = -0.00163274 Jy ! Component: 1350 - total flux cleaned = -0.00168259 Jy ! Component: 1400 - total flux cleaned = -0.00166607 Jy ! Component: 1450 - total flux cleaned = -0.0016985 Jy ! Component: 1500 - total flux cleaned = -0.00171476 Jy ! Component: 1550 - total flux cleaned = -0.00173057 Jy ! Component: 1600 - total flux cleaned = -0.00169931 Jy ! Component: 1650 - total flux cleaned = -0.00173033 Jy ! Component: 1700 - total flux cleaned = -0.00179154 Jy ! Component: 1750 - total flux cleaned = -0.00168517 Jy ! Component: 1800 - total flux cleaned = -0.00176051 Jy ! Component: 1850 - total flux cleaned = -0.00176038 Jy ! Component: 1900 - total flux cleaned = -0.00173086 Jy ! Component: 1950 - total flux cleaned = -0.00174549 Jy ! Component: 2000 - total flux cleaned = -0.00168798 Jy ! Component: 2050 - total flux cleaned = -0.0017165 Jy ! Component: 2100 - total flux cleaned = -0.00174467 Jy ! Component: 2150 - total flux cleaned = -0.00170275 Jy ! Component: 2200 - total flux cleaned = -0.00166128 Jy ! Component: 2250 - total flux cleaned = -0.0016206 Jy ! Component: 2300 - total flux cleaned = -0.00162087 Jy ! Component: 2350 - total flux cleaned = -0.00163441 Jy ! Component: 2400 - total flux cleaned = -0.00159414 Jy ! Component: 2450 - total flux cleaned = -0.00156798 Jy ! Component: 2500 - total flux cleaned = -0.00154183 Jy ! Component: 2550 - total flux cleaned = -0.0015808 Jy ! Component: 2600 - total flux cleaned = -0.00152935 Jy ! Component: 2650 - total flux cleaned = -0.00156751 Jy ! Component: 2700 - total flux cleaned = -0.00149172 Jy ! Component: 2750 - total flux cleaned = -0.00147905 Jy ! Component: 2800 - total flux cleaned = -0.00141705 Jy ! Component: 2850 - total flux cleaned = -0.0014416 Jy ! Component: 2900 - total flux cleaned = -0.00138048 Jy ! Component: 2950 - total flux cleaned = -0.00135626 Jy ! Component: 3000 - total flux cleaned = -0.00134435 Jy ! Component: 3050 - total flux cleaned = -0.00129673 Jy ! Component: 3100 - total flux cleaned = -0.00130866 Jy ! Component: 3150 - total flux cleaned = -0.00125001 Jy ! Component: 3200 - total flux cleaned = -0.00120321 Jy ! Component: 3250 - total flux cleaned = -0.00119168 Jy ! Component: 3300 - total flux cleaned = -0.00116882 Jy ! Component: 3350 - total flux cleaned = -0.00112312 Jy ! Component: 3400 - total flux cleaned = -0.00111188 Jy ! Component: 3450 - total flux cleaned = -0.00105581 Jy ! Component: 3500 - total flux cleaned = -0.00105587 Jy ! Component: 3550 - total flux cleaned = -0.00100062 Jy ! Component: 3600 - total flux cleaned = -0.000967724 Jy ! Component: 3650 - total flux cleaned = -0.000924193 Jy ! Component: 3700 - total flux cleaned = -0.000956705 Jy ! Component: 3750 - total flux cleaned = -0.000945841 Jy ! Component: 3800 - total flux cleaned = -0.000903251 Jy ! Component: 3850 - total flux cleaned = -0.000882254 Jy ! Component: 3900 - total flux cleaned = -0.000882356 Jy ! Component: 3950 - total flux cleaned = -0.000934684 Jy ! Component: 4000 - total flux cleaned = -0.000903432 Jy ! Component: 4050 - total flux cleaned = -0.000913651 Jy ! Total flux subtracted in 4096 components = -0.000913567 Jy ! Clean residual min=-0.000591 max=0.000602 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0708366 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 360 components and 0.0708367 Jy ![Exited script file: muppet] wmap "J1107-1226_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.423 at -3.826 degrees (North through East) ! Clean map min=-0.0013457 max=0.065785 Jy/beam ! Writing clean map to FITS file: J1107-1226_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0657853 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189359 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.863531 0.863531 1.72706 3.45412 6.90825 13.8165 27.633 55.266 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.423 at -3.826 degrees (North through East) ! Clean map min=-0.0013457 max=0.065785 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1107-1226_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:22:43 2017