! Started logfile: J1107+1628_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:50:41 2017 obs J1107+1628_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1107+1628_S_2015_01_22_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1107+1628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1107+1628_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808049Jy sigma=0.010403 ! Fit after self-cal, rms=0.799550Jy sigma=0.010292 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.414 mas, bmaj=8.639 mas, bpa=9.989 degrees ! Estimated noise=1161.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154735 Jy ! Component: 100 - total flux cleaned = 0.191504 Jy ! Total flux subtracted in 100 components = 0.191504 Jy ! Clean residual min=-0.015272 max=0.027462 Jy/beam ! Clean residual mean=-0.000048 rms=0.005042 Jy/beam ! Combined flux in latest and established models = 0.191504 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.191504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087798Jy sigma=0.001014 ! Fit after self-cal, rms=0.087782Jy sigma=0.001013 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.838 mas, bmaj=9.014 mas, bpa=9.808 degrees ! Estimated noise=1010.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275311 Jy ! Component: 100 - total flux cleaned = 0.0409623 Jy ! Component: 150 - total flux cleaned = 0.0493661 Jy ! Component: 200 - total flux cleaned = 0.0535952 Jy ! Total flux subtracted in 200 components = 0.0535952 Jy ! Clean residual min=-0.009616 max=0.011466 Jy/beam ! Clean residual mean=-0.000018 rms=0.002734 Jy/beam ! Combined flux in latest and established models = 0.2451 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.2451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078609Jy sigma=0.000886 ! Fit after self-cal, rms=0.078221Jy sigma=0.000881 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.95 KP 1.09 ! LA 1.06 MK 1.00* NL 0.95 OV 0.94 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.03 KP 1.02 ! LA 1.03 MK 1.00* NL 1.39 OV 0.98 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.03 KP 0.87 ! LA 0.84 MK 1.00* NL 1.50 OV 0.89 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.96 KP 0.80 ! LA 0.91 MK 1.00* NL 0.76 OV 0.95 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.078221Jy sigma=0.000881 ! Fit after self-cal, rms=0.068528Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.869 mas, bmaj=9.011 mas, bpa=9.13 degrees ! Estimated noise=1013.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.01453e-05 Jy ! Component: 100 - total flux cleaned = -5.11128e-05 Jy ! Component: 150 - total flux cleaned = -0.000219487 Jy ! Component: 200 - total flux cleaned = -0.000365586 Jy ! Total flux subtracted in 200 components = -0.000365586 Jy ! Clean residual min=-0.005081 max=0.005578 Jy/beam ! Clean residual mean=-0.000004 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.244734 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 63 components and 0.244734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068247Jy sigma=0.000764 ! Fit after self-cal, rms=0.068236Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068236Jy sigma=0.000763 ! Fit after self-cal, rms=0.068352Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.868 mas, bmaj=9.012 mas, bpa=9.173 degrees ! Estimated noise=1014.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107228 Jy ! Component: 100 - total flux cleaned = -0.00114461 Jy ! Component: 150 - total flux cleaned = -0.00114526 Jy ! Component: 200 - total flux cleaned = -0.00114673 Jy ! Total flux subtracted in 200 components = -0.00114673 Jy ! Clean residual min=-0.004758 max=0.005224 Jy/beam ! Clean residual mean=-0.000005 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.243587 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 0.243587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068229Jy sigma=0.000761 ! Fit after self-cal, rms=0.068230Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110636 Jy ! Component: 100 - total flux cleaned = -0.000158078 Jy ! Component: 150 - total flux cleaned = -0.000289208 Jy ! Component: 200 - total flux cleaned = -0.000330782 Jy ! Total flux subtracted in 200 components = -0.000330782 Jy ! Clean residual min=-0.004636 max=0.005210 Jy/beam ! Clean residual mean=-0.000006 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.243257 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 0.243257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068172Jy sigma=0.000760 ! Fit after self-cal, rms=0.068172Jy sigma=0.000760 ! Inverting map ! Added new window around map position (126.5, -62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429856 Jy ! Component: 100 - total flux cleaned = 0.00495486 Jy ! Component: 150 - total flux cleaned = 0.00568209 Jy ! Component: 200 - total flux cleaned = 0.00630453 Jy ! Total flux subtracted in 200 components = 0.00630453 Jy ! Clean residual min=-0.003818 max=0.003657 Jy/beam ! Clean residual mean=-0.000007 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.249561 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 122 components and 0.249561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067884Jy sigma=0.000756 ! Fit after self-cal, rms=0.067876Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067876Jy sigma=0.000756 ! Fit after self-cal, rms=0.067886Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.872 mas, bmaj=9.013 mas, bpa=9.193 degrees ! Estimated noise=1013.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256891 Jy ! Component: 100 - total flux cleaned = 2.25483e-06 Jy ! Component: 150 - total flux cleaned = 0.000238145 Jy ! Component: 200 - total flux cleaned = 0.000364973 Jy ! Total flux subtracted in 200 components = 0.000364973 Jy ! Clean residual min=-0.003377 max=0.003472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.249926 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 0.249926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067815Jy sigma=0.000755 ! Fit after self-cal, rms=0.067819Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134577 Jy ! Component: 100 - total flux cleaned = 0.000133393 Jy ! Component: 150 - total flux cleaned = 0.000170281 Jy ! Component: 200 - total flux cleaned = 0.00020555 Jy ! Total flux subtracted in 200 components = 0.00020555 Jy ! Clean residual min=-0.003219 max=0.003445 Jy/beam ! Clean residual mean=-0.000003 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.250132 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 0.250132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067782Jy sigma=0.000754 ! Fit after self-cal, rms=0.067781Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067781Jy sigma=0.000754 ! Fit after self-cal, rms=0.067766Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.531 mas, bmaj=10.31 mas, bpa=-3.756 degrees ! Estimated noise=1112.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120691 Jy ! Component: 100 - total flux cleaned = -0.00169537 Jy ! Component: 150 - total flux cleaned = -0.00189601 Jy ! Component: 200 - total flux cleaned = -0.00193226 Jy ! Total flux subtracted in 200 components = -0.00193226 Jy ! Clean residual min=-0.003076 max=0.003488 Jy/beam ! Clean residual mean=-0.000004 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.248199 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 172 components and 0.248199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067749Jy sigma=0.000753 ! Fit after self-cal, rms=0.067749Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.40975e-05 Jy ! Component: 100 - total flux cleaned = -8.72652e-05 Jy ! Component: 150 - total flux cleaned = -8.61644e-05 Jy ! Component: 200 - total flux cleaned = -8.62476e-05 Jy ! Total flux subtracted in 200 components = -8.62476e-05 Jy ! Clean residual min=-0.002867 max=0.003358 Jy/beam ! Clean residual mean=-0.000005 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.248113 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 187 components and 0.248113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067743Jy sigma=0.000753 ! Fit after self-cal, rms=0.067742Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.872 mas, bmaj=9.013 mas, bpa=9.22 degrees ! Estimated noise=1012.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.872 x 9.013 at 9.22 degrees (North through East) ! Clean map min=-0.0033494 max=0.18914 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=8.602 mas, bpa=9.169 degrees ! Estimated noise=1147.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152662 Jy ! Component: 100 - total flux cleaned = 0.190286 Jy ! Component: 150 - total flux cleaned = 0.208424 Jy ! Component: 200 - total flux cleaned = 0.218825 Jy ! Total flux subtracted in 200 components = 0.218825 Jy ! Clean residual min=-0.005807 max=0.007642 Jy/beam ! Clean residual mean=-0.000020 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.218825 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.218825 Jy ! Inverting map and beam ! Estimated beam: bmin=4.872 mas, bmaj=9.013 mas, bpa=9.22 degrees ! Estimated noise=1012.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00918501 Jy ! Component: 100 - total flux cleaned = 0.014119 Jy ! Component: 150 - total flux cleaned = 0.0172268 Jy ! Component: 200 - total flux cleaned = 0.0199403 Jy ! Total flux subtracted in 200 components = 0.0199403 Jy ! Clean residual min=-0.003862 max=0.004153 Jy/beam ! Clean residual mean=-0.000012 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.238766 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.238766 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.531 mas, bmaj=10.31 mas, bpa=-3.756 degrees ! Estimated noise=1112.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035198 Jy ! Component: 100 - total flux cleaned = 0.00537173 Jy ! Component: 150 - total flux cleaned = 0.00594219 Jy ! Component: 200 - total flux cleaned = 0.0062966 Jy ! Total flux subtracted in 200 components = 0.0062966 Jy ! Clean residual min=-0.003145 max=0.002950 Jy/beam ! Clean residual mean=-0.000007 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.245062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310704 Jy ! Component: 100 - total flux cleaned = 0.000645054 Jy ! Component: 150 - total flux cleaned = 0.000946384 Jy ! Component: 200 - total flux cleaned = 0.00108524 Jy ! Total flux subtracted in 200 components = 0.00108524 Jy ! Clean residual min=-0.002753 max=0.002693 Jy/beam ! Clean residual mean=-0.000006 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.246147 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 125 components and 0.246147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.872 mas, bmaj=9.013 mas, bpa=9.22 degrees ! Estimated noise=1012.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253853 Jy ! Component: 100 - total flux cleaned = -9.59458e-05 Jy ! Component: 150 - total flux cleaned = -9.8079e-05 Jy ! Component: 200 - total flux cleaned = 3.65572e-05 Jy ! Total flux subtracted in 200 components = 3.65572e-05 Jy ! Clean residual min=-0.002931 max=0.002505 Jy/beam ! Clean residual mean=-0.000002 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.246184 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 0.246184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067686Jy sigma=0.000752 ! Fit after self-cal, rms=0.067639Jy sigma=0.000752 wmodel J1107+1628_S_2015_01_22_pus_map.mod ! Writing 151 model components to file: J1107+1628_S_2015_01_22_pus_map.mod wobs J1107+1628_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1107+1628_S_2015_01_22_pus_uvs.fits wwins J1107+1628_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1107+1628_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281537 Jy ! Component: 100 - total flux cleaned = -0.000409867 Jy ! Component: 150 - total flux cleaned = -0.000294128 Jy ! Component: 200 - total flux cleaned = -0.000149165 Jy ! Component: 250 - total flux cleaned = 2.13054e-05 Jy ! Component: 300 - total flux cleaned = 0.000246566 Jy ! Component: 350 - total flux cleaned = 0.000339685 Jy ! Component: 400 - total flux cleaned = 0.000517718 Jy ! Component: 450 - total flux cleaned = 0.000631739 Jy ! Component: 500 - total flux cleaned = 0.000685942 Jy ! Component: 550 - total flux cleaned = 0.00060681 Jy ! Component: 600 - total flux cleaned = 0.000581183 Jy ! Component: 650 - total flux cleaned = 0.000556887 Jy ! Component: 700 - total flux cleaned = 0.000556635 Jy ! Component: 750 - total flux cleaned = 0.000579272 Jy ! Component: 800 - total flux cleaned = 0.000645922 Jy ! Component: 850 - total flux cleaned = 0.000689353 Jy ! Component: 900 - total flux cleaned = 0.00075222 Jy ! Component: 950 - total flux cleaned = 0.000793332 Jy ! Component: 1000 - total flux cleaned = 0.00083327 Jy ! Component: 1050 - total flux cleaned = 0.000891136 Jy ! Component: 1100 - total flux cleaned = 0.00100432 Jy ! Component: 1150 - total flux cleaned = 0.00107787 Jy ! Component: 1200 - total flux cleaned = 0.00114994 Jy ! Component: 1250 - total flux cleaned = 0.00122069 Jy ! Component: 1300 - total flux cleaned = 0.00127253 Jy ! Component: 1350 - total flux cleaned = 0.00139069 Jy ! Component: 1400 - total flux cleaned = 0.00145637 Jy ! Component: 1450 - total flux cleaned = 0.00155255 Jy ! Component: 1500 - total flux cleaned = 0.00155255 Jy ! Component: 1550 - total flux cleaned = 0.0016454 Jy ! Component: 1600 - total flux cleaned = 0.00169085 Jy ! Component: 1650 - total flux cleaned = 0.00176494 Jy ! Component: 1700 - total flux cleaned = 0.00179398 Jy ! Component: 1750 - total flux cleaned = 0.0018657 Jy ! Component: 1800 - total flux cleaned = 0.00193577 Jy ! Component: 1850 - total flux cleaned = 0.00199115 Jy ! Component: 1900 - total flux cleaned = 0.00205925 Jy ! Component: 1950 - total flux cleaned = 0.00212612 Jy ! Component: 2000 - total flux cleaned = 0.00213943 Jy ! Component: 2050 - total flux cleaned = 0.00217846 Jy ! Component: 2100 - total flux cleaned = 0.00222957 Jy ! Component: 2150 - total flux cleaned = 0.00222936 Jy ! Component: 2200 - total flux cleaned = 0.00224187 Jy ! Component: 2250 - total flux cleaned = 0.00225404 Jy ! Component: 2300 - total flux cleaned = 0.00224203 Jy ! Component: 2350 - total flux cleaned = 0.00228999 Jy ! Component: 2400 - total flux cleaned = 0.00225434 Jy ! Component: 2450 - total flux cleaned = 0.00230165 Jy ! Component: 2500 - total flux cleaned = 0.00229014 Jy ! Component: 2550 - total flux cleaned = 0.00231332 Jy ! Component: 2600 - total flux cleaned = 0.00230192 Jy ! Component: 2650 - total flux cleaned = 0.00231315 Jy ! Component: 2700 - total flux cleaned = 0.00231315 Jy ! Component: 2750 - total flux cleaned = 0.00229089 Jy ! Component: 2800 - total flux cleaned = 0.00231285 Jy ! Component: 2850 - total flux cleaned = 0.00232375 Jy ! Component: 2900 - total flux cleaned = 0.00233458 Jy ! Component: 2950 - total flux cleaned = 0.00232381 Jy ! Component: 3000 - total flux cleaned = 0.00232379 Jy ! Component: 3050 - total flux cleaned = 0.00231311 Jy ! Component: 3100 - total flux cleaned = 0.00228149 Jy ! Component: 3150 - total flux cleaned = 0.00228147 Jy ! Component: 3200 - total flux cleaned = 0.00225027 Jy ! Component: 3250 - total flux cleaned = 0.00221925 Jy ! Component: 3300 - total flux cleaned = 0.00217818 Jy ! Component: 3350 - total flux cleaned = 0.00215776 Jy ! Component: 3400 - total flux cleaned = 0.00214761 Jy ! Component: 3450 - total flux cleaned = 0.00210721 Jy ! Component: 3500 - total flux cleaned = 0.00206697 Jy ! Component: 3550 - total flux cleaned = 0.00204689 Jy ! Component: 3600 - total flux cleaned = 0.00197734 Jy ! Component: 3650 - total flux cleaned = 0.00196747 Jy ! Component: 3700 - total flux cleaned = 0.00192815 Jy ! Component: 3750 - total flux cleaned = 0.00190865 Jy ! Component: 3800 - total flux cleaned = 0.00187945 Jy ! Component: 3850 - total flux cleaned = 0.00182134 Jy ! Component: 3900 - total flux cleaned = 0.00178274 Jy ! Component: 3950 - total flux cleaned = 0.00172502 Jy ! Component: 4000 - total flux cleaned = 0.00167712 Jy ! Component: 4050 - total flux cleaned = 0.00164841 Jy ! Total flux subtracted in 4096 components = 0.00163894 Jy ! Clean residual min=-0.000489 max=0.000615 Jy/beam ! Clean residual mean=-0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.247823 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 406 components and 0.247823 Jy ![Exited script file: muppet] wmap "J1107+1628_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.872 x 9.013 at 9.22 degrees (North through East) ! Clean map min=-0.0029002 max=0.19052 Jy/beam ! Writing clean map to FITS file: J1107+1628_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.190521 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168421 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.2652 0.2652 0.5304 1.0608 2.1216 4.2432 8.48641 16.9728 33.9456 67.8913 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.19 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.872 x 9.013 at 9.22 degrees (North through East) ! Clean map min=-0.0029002 max=0.19052 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1107+1628_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:50:48 2017