! Started logfile: J1106+2812_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:49 2017 obs J1106+2812_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1106+2812_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501111 visibilities/baseline/integration-bin. ! Found source: J1106+2812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1106+2812_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.877938Jy sigma=0.013846 ! Fit after self-cal, rms=0.868594Jy sigma=0.013695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=4.82 mas, bpa=5.725 degrees ! Estimated noise=974.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989355 Jy ! Component: 100 - total flux cleaned = 0.121201 Jy ! Total flux subtracted in 100 components = 0.121201 Jy ! Clean residual min=-0.005411 max=0.007684 Jy/beam ! Clean residual mean=0.000020 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.121201 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.121201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066729Jy sigma=0.000927 ! Fit after self-cal, rms=0.066727Jy sigma=0.000927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=5.548 mas, bpa=6.617 degrees ! Estimated noise=643.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100177 Jy ! Component: 100 - total flux cleaned = 0.0141346 Jy ! Component: 150 - total flux cleaned = 0.0162488 Jy ! Component: 200 - total flux cleaned = 0.0174728 Jy ! Total flux subtracted in 200 components = 0.0174728 Jy ! Clean residual min=-0.003756 max=0.005273 Jy/beam ! Clean residual mean=0.000011 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.138674 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.138674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064892Jy sigma=0.000912 ! Fit after self-cal, rms=0.064903Jy sigma=0.000912 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.02 ! MK 0.98 NL 0.96 OV 0.98 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.99 ! MK 0.98 NL 1.02 OV 1.00 PT 0.97 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.82 ! MK 0.96 NL 1.01 OV 0.92 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.90 ! MK 1.01 NL 1.09 OV 0.98 PT 0.99 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.064903Jy sigma=0.000912 ! Fit after self-cal, rms=0.061399Jy sigma=0.000887 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=5.58 mas, bpa=6.471 degrees ! Estimated noise=641.674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159381 Jy ! Component: 100 - total flux cleaned = -0.00026492 Jy ! Component: 150 - total flux cleaned = -0.000388741 Jy ! Component: 200 - total flux cleaned = -0.000473631 Jy ! Total flux subtracted in 200 components = -0.000473631 Jy ! Clean residual min=-0.002498 max=0.002245 Jy/beam ! Clean residual mean=-0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.1382 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.1382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061355Jy sigma=0.000887 ! Fit after self-cal, rms=0.061120Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061120Jy sigma=0.000886 ! Fit after self-cal, rms=0.061015Jy sigma=0.000885 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=5.569 mas, bpa=6.284 degrees ! Estimated noise=641.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86462e-05 Jy ! Component: 100 - total flux cleaned = -6.76926e-05 Jy ! Component: 150 - total flux cleaned = -0.000119766 Jy ! Component: 200 - total flux cleaned = -0.000192172 Jy ! Total flux subtracted in 200 components = -0.000192172 Jy ! Clean residual min=-0.002169 max=0.002218 Jy/beam ! Clean residual mean=-0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.138008 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.138008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060983Jy sigma=0.000884 ! Fit after self-cal, rms=0.060980Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58, -83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165476 Jy ! Component: 100 - total flux cleaned = 0.00178207 Jy ! Component: 150 - total flux cleaned = 0.00181719 Jy ! Component: 200 - total flux cleaned = 0.00184924 Jy ! Total flux subtracted in 200 components = 0.00184924 Jy ! Clean residual min=-0.001928 max=0.001920 Jy/beam ! Clean residual mean=-0.000003 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.139857 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.139857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060901Jy sigma=0.000883 ! Fit after self-cal, rms=0.060895Jy sigma=0.000883 ! Inverting map ! Added new window around map position (-49.5, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154272 Jy ! Component: 100 - total flux cleaned = 0.00135405 Jy ! Component: 150 - total flux cleaned = 0.00128853 Jy ! Component: 200 - total flux cleaned = 0.00120058 Jy ! Total flux subtracted in 200 components = 0.00120058 Jy ! Clean residual min=-0.001723 max=0.001615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.141058 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.141058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060829Jy sigma=0.000882 ! Fit after self-cal, rms=0.060826Jy sigma=0.000882 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060826Jy sigma=0.000882 ! Fit after self-cal, rms=0.060650Jy sigma=0.000882 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=5.564 mas, bpa=6.274 degrees ! Estimated noise=639.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474431 Jy ! Component: 100 - total flux cleaned = 0.000446893 Jy ! Component: 150 - total flux cleaned = 0.000370084 Jy ! Component: 200 - total flux cleaned = 0.000369928 Jy ! Total flux subtracted in 200 components = 0.000369928 Jy ! Clean residual min=-0.001675 max=0.001723 Jy/beam ! Clean residual mean=-0.000003 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.141428 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.141428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060624Jy sigma=0.000882 ! Fit after self-cal, rms=0.060619Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-95.5, -96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103382 Jy ! Component: 100 - total flux cleaned = 0.00109557 Jy ! Component: 150 - total flux cleaned = 0.00123589 Jy ! Component: 200 - total flux cleaned = 0.00128714 Jy ! Total flux subtracted in 200 components = 0.00128714 Jy ! Clean residual min=-0.001572 max=0.001568 Jy/beam ! Clean residual mean=-0.000003 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.142715 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.142715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060570Jy sigma=0.000881 ! Fit after self-cal, rms=0.060565Jy sigma=0.000881 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060565Jy sigma=0.000881 ! Fit after self-cal, rms=0.060487Jy sigma=0.000881 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.881 mas, bmaj=9.886 mas, bpa=8.736 degrees ! Estimated noise=771.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44431e-05 Jy ! Component: 100 - total flux cleaned = 0.000104298 Jy ! Component: 150 - total flux cleaned = 6.80087e-05 Jy ! Component: 200 - total flux cleaned = 2.17994e-05 Jy ! Total flux subtracted in 200 components = 2.17994e-05 Jy ! Clean residual min=-0.001860 max=0.001407 Jy/beam ! Clean residual mean=-0.000006 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.142737 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.142737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060478Jy sigma=0.000881 ! Fit after self-cal, rms=0.060474Jy sigma=0.000881 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.68167e-05 Jy ! Component: 100 - total flux cleaned = -0.000100758 Jy ! Component: 150 - total flux cleaned = -0.000165372 Jy ! Component: 200 - total flux cleaned = -0.000226339 Jy ! Total flux subtracted in 200 components = -0.000226339 Jy ! Clean residual min=-0.001832 max=0.001408 Jy/beam ! Clean residual mean=-0.000006 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.14251 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.14251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060470Jy sigma=0.000881 ! Fit after self-cal, rms=0.060469Jy sigma=0.000881 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=5.561 mas, bpa=6.166 degrees ! Estimated noise=639.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 5.561 at 6.166 degrees (North through East) ! Clean map min=-0.0014655 max=0.12936 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=4.841 mas, bpa=6.183 degrees ! Estimated noise=980.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0995396 Jy ! Component: 100 - total flux cleaned = 0.122085 Jy ! Component: 150 - total flux cleaned = 0.130295 Jy ! Component: 200 - total flux cleaned = 0.134545 Jy ! Total flux subtracted in 200 components = 0.134545 Jy ! Clean residual min=-0.003602 max=0.003172 Jy/beam ! Clean residual mean=0.000002 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.134545 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.134545 Jy ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=5.561 mas, bpa=6.166 degrees ! Estimated noise=639.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337333 Jy ! Component: 100 - total flux cleaned = 0.00532652 Jy ! Component: 150 - total flux cleaned = 0.00647831 Jy ! Component: 200 - total flux cleaned = 0.00750352 Jy ! Total flux subtracted in 200 components = 0.00750352 Jy ! Clean residual min=-0.001804 max=0.001628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.142049 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.142049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.881 mas, bmaj=9.886 mas, bpa=8.736 degrees ! Estimated noise=771.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039108 Jy ! Component: 100 - total flux cleaned = 0.000609749 Jy ! Component: 150 - total flux cleaned = 0.000643695 Jy ! Component: 200 - total flux cleaned = 0.000728422 Jy ! Total flux subtracted in 200 components = 0.000728422 Jy ! Clean residual min=-0.001985 max=0.001548 Jy/beam ! Clean residual mean=-0.000006 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.142777 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.92025e-05 Jy ! Component: 100 - total flux cleaned = 7.12255e-05 Jy ! Component: 150 - total flux cleaned = 5.12809e-05 Jy ! Component: 200 - total flux cleaned = -1.38425e-06 Jy ! Total flux subtracted in 200 components = -1.38425e-06 Jy ! Clean residual min=-0.001936 max=0.001486 Jy/beam ! Clean residual mean=-0.000007 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.142776 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 73 components and 0.142776 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=5.561 mas, bpa=6.166 degrees ! Estimated noise=639.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108079 Jy ! Component: 100 - total flux cleaned = -3.09016e-05 Jy ! Component: 150 - total flux cleaned = 5.44878e-06 Jy ! Component: 200 - total flux cleaned = 0.000103927 Jy ! Total flux subtracted in 200 components = 0.000103927 Jy ! Clean residual min=-0.001561 max=0.001513 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.14288 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.14288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060502Jy sigma=0.000882 ! Fit after self-cal, rms=0.060516Jy sigma=0.000882 wmodel J1106+2812_S_2014_01_04_pus_map.mod ! Writing 92 model components to file: J1106+2812_S_2014_01_04_pus_map.mod wobs J1106+2812_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1106+2812_S_2014_01_04_pus_uvs.fits wwins J1106+2812_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1106+2812_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290636 Jy ! Component: 100 - total flux cleaned = -0.00039454 Jy ! Component: 150 - total flux cleaned = -0.00039398 Jy ! Component: 200 - total flux cleaned = -0.000371103 Jy ! Component: 250 - total flux cleaned = -0.000460286 Jy ! Component: 300 - total flux cleaned = -0.000502873 Jy ! Component: 350 - total flux cleaned = -0.000605531 Jy ! Component: 400 - total flux cleaned = -0.000704577 Jy ! Component: 450 - total flux cleaned = -0.00074254 Jy ! Component: 500 - total flux cleaned = -0.000816365 Jy ! Component: 550 - total flux cleaned = -0.00092388 Jy ! Component: 600 - total flux cleaned = -0.00106304 Jy ! Component: 650 - total flux cleaned = -0.0011639 Jy ! Component: 700 - total flux cleaned = -0.00126224 Jy ! Component: 750 - total flux cleaned = -0.00135812 Jy ! Component: 800 - total flux cleaned = -0.00137351 Jy ! Component: 850 - total flux cleaned = -0.00138892 Jy ! Component: 900 - total flux cleaned = -0.00143382 Jy ! Component: 950 - total flux cleaned = -0.00149191 Jy ! Component: 1000 - total flux cleaned = -0.00150627 Jy ! Component: 1050 - total flux cleaned = -0.00157622 Jy ! Component: 1100 - total flux cleaned = -0.00156232 Jy ! Component: 1150 - total flux cleaned = -0.00154908 Jy ! Component: 1200 - total flux cleaned = -0.00158895 Jy ! Component: 1250 - total flux cleaned = -0.001602 Jy ! Component: 1300 - total flux cleaned = -0.00160199 Jy ! Component: 1350 - total flux cleaned = -0.0015517 Jy ! Component: 1400 - total flux cleaned = -0.00153944 Jy ! Component: 1450 - total flux cleaned = -0.00152727 Jy ! Component: 1500 - total flux cleaned = -0.00150319 Jy ! Component: 1550 - total flux cleaned = -0.00149144 Jy ! Component: 1600 - total flux cleaned = -0.00142152 Jy ! Component: 1650 - total flux cleaned = -0.00141005 Jy ! Component: 1700 - total flux cleaned = -0.00137585 Jy ! Component: 1750 - total flux cleaned = -0.00135356 Jy ! Component: 1800 - total flux cleaned = -0.00134252 Jy ! Component: 1850 - total flux cleaned = -0.00130973 Jy ! Component: 1900 - total flux cleaned = -0.00134201 Jy ! Component: 1950 - total flux cleaned = -0.00133109 Jy ! Component: 2000 - total flux cleaned = -0.00132048 Jy ! Component: 2050 - total flux cleaned = -0.0013102 Jy ! Component: 2100 - total flux cleaned = -0.00134106 Jy ! Component: 2150 - total flux cleaned = -0.00132066 Jy ! Component: 2200 - total flux cleaned = -0.00131048 Jy ! Component: 2250 - total flux cleaned = -0.00131035 Jy ! Component: 2300 - total flux cleaned = -0.00131021 Jy ! Component: 2350 - total flux cleaned = -0.00128105 Jy ! Component: 2400 - total flux cleaned = -0.00130032 Jy ! Component: 2450 - total flux cleaned = -0.00129091 Jy ! Component: 2500 - total flux cleaned = -0.00129073 Jy ! Component: 2550 - total flux cleaned = -0.00127212 Jy ! Component: 2600 - total flux cleaned = -0.00127213 Jy ! Component: 2650 - total flux cleaned = -0.00125391 Jy ! Component: 2700 - total flux cleaned = -0.00123587 Jy ! Component: 2750 - total flux cleaned = -0.00123579 Jy ! Component: 2800 - total flux cleaned = -0.00119139 Jy ! Component: 2850 - total flux cleaned = -0.00119138 Jy ! Component: 2900 - total flux cleaned = -0.00117397 Jy ! Component: 2950 - total flux cleaned = -0.00113081 Jy ! Component: 3000 - total flux cleaned = -0.00110515 Jy ! Component: 3050 - total flux cleaned = -0.00104574 Jy ! Component: 3100 - total flux cleaned = -0.00103734 Jy ! Component: 3150 - total flux cleaned = -0.000978838 Jy ! Component: 3200 - total flux cleaned = -0.000937407 Jy ! Component: 3250 - total flux cleaned = -0.0008963 Jy ! Component: 3300 - total flux cleaned = -0.000879955 Jy ! Component: 3350 - total flux cleaned = -0.000823216 Jy ! Component: 3400 - total flux cleaned = -0.000783088 Jy ! Component: 3450 - total flux cleaned = -0.000743342 Jy ! Component: 3500 - total flux cleaned = -0.000719644 Jy ! Component: 3550 - total flux cleaned = -0.000703968 Jy ! Component: 3600 - total flux cleaned = -0.000664997 Jy ! Component: 3650 - total flux cleaned = -0.000641898 Jy ! Component: 3700 - total flux cleaned = -0.000626562 Jy ! Component: 3750 - total flux cleaned = -0.000603694 Jy ! Component: 3800 - total flux cleaned = -0.000588565 Jy ! Component: 3850 - total flux cleaned = -0.000543404 Jy ! Component: 3900 - total flux cleaned = -0.000535932 Jy ! Component: 3950 - total flux cleaned = -0.000491369 Jy ! Component: 4000 - total flux cleaned = -0.000491423 Jy ! Component: 4050 - total flux cleaned = -0.000483996 Jy ! Total flux subtracted in 4096 components = -0.000440217 Jy ! Clean residual min=-0.000394 max=0.000589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.142439 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 330 components and 0.14244 Jy ![Exited script file: muppet] wmap "J1106+2812_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 5.561 at 6.166 degrees (North through East) ! Clean map min=-0.0012944 max=0.12945 Jy/beam ! Writing clean map to FITS file: J1106+2812_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000114946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266394 0.266394 0.532787 1.06557 2.13115 4.2623 8.52459 17.0492 34.0984 68.1967 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 5.561 at 6.166 degrees (North through East) ! Clean map min=-0.0012944 max=0.12945 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1106+2812_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:54 2017