! Started logfile: J1105+0202_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:43 2017 obs J1105+0202_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1105+0202_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1105+0202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1105+0202_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839053Jy sigma=0.011551 ! Fit after self-cal, rms=0.793717Jy sigma=0.011023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=6.367 mas, bpa=-5.748 degrees ! Estimated noise=875.995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15345 Jy ! Component: 100 - total flux cleaned = 0.192043 Jy ! Total flux subtracted in 100 components = 0.192043 Jy ! Clean residual min=-0.010308 max=0.016396 Jy/beam ! Clean residual mean=-0.000136 rms=0.003091 Jy/beam ! Combined flux in latest and established models = 0.192043 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.192043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090721Jy sigma=0.001105 ! Fit after self-cal, rms=0.090773Jy sigma=0.001104 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=7.096 mas, bpa=-5.682 degrees ! Estimated noise=537.435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236461 Jy ! Component: 100 - total flux cleaned = 0.0351994 Jy ! Component: 150 - total flux cleaned = 0.0427364 Jy ! Component: 200 - total flux cleaned = 0.0479003 Jy ! Total flux subtracted in 200 components = 0.0479003 Jy ! Clean residual min=-0.009153 max=0.009046 Jy/beam ! Clean residual mean=-0.000159 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.239944 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.239944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083152Jy sigma=0.001031 ! Fit after self-cal, rms=0.083099Jy sigma=0.001030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.81 KP 1.00* LA 1.02 ! MK 1.01 NL 0.98 OV 0.97 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 KP 1.00* LA 0.98 ! MK 1.00 NL 1.05 OV 1.01 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 KP 1.00* LA 0.80 ! MK 1.01 NL 1.01 OV 0.94 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 KP 1.00* LA 0.85 ! MK 1.00 NL 1.08 OV 0.98 PT 0.99 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.083099Jy sigma=0.001030 ! Fit after self-cal, rms=0.077748Jy sigma=0.000984 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=7.205 mas, bpa=-5.754 degrees ! Estimated noise=536.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293704 Jy ! Component: 100 - total flux cleaned = -0.000540913 Jy ! Component: 150 - total flux cleaned = -0.000539343 Jy ! Component: 200 - total flux cleaned = -0.00054034 Jy ! Total flux subtracted in 200 components = -0.00054034 Jy ! Clean residual min=-0.004992 max=0.006215 Jy/beam ! Clean residual mean=-0.000068 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.239403 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.239403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077570Jy sigma=0.000982 ! Fit after self-cal, rms=0.077381Jy sigma=0.000981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077381Jy sigma=0.000981 ! Fit after self-cal, rms=0.079929Jy sigma=0.000962 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=7.193 mas, bpa=-5.938 degrees ! Estimated noise=537.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12081e-05 Jy ! Component: 100 - total flux cleaned = -0.000275862 Jy ! Component: 150 - total flux cleaned = -0.000316043 Jy ! Component: 200 - total flux cleaned = -0.000352717 Jy ! Total flux subtracted in 200 components = -0.000352717 Jy ! Clean residual min=-0.002724 max=0.004569 Jy/beam ! Clean residual mean=-0.000049 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.239051 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.239051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079869Jy sigma=0.000962 ! Fit after self-cal, rms=0.079894Jy sigma=0.000961 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413547 Jy ! Component: 100 - total flux cleaned = 0.00585127 Jy ! Component: 150 - total flux cleaned = 0.00633976 Jy ! Component: 200 - total flux cleaned = 0.00665898 Jy ! Total flux subtracted in 200 components = 0.00665898 Jy ! Clean residual min=-0.002319 max=0.002661 Jy/beam ! Clean residual mean=-0.000027 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.24571 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.24571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079686Jy sigma=0.000958 ! Fit after self-cal, rms=0.079661Jy sigma=0.000958 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079661Jy sigma=0.000958 ! Fit after self-cal, rms=0.083667Jy sigma=0.000960 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=7.204 mas, bpa=-5.483 degrees ! Estimated noise=542.685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698999 Jy ! Component: 100 - total flux cleaned = 0.000763648 Jy ! Component: 150 - total flux cleaned = 0.00087412 Jy ! Component: 200 - total flux cleaned = 0.000962329 Jy ! Total flux subtracted in 200 components = 0.000962329 Jy ! Clean residual min=-0.002385 max=0.002687 Jy/beam ! Clean residual mean=-0.000021 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.246672 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 0.246672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083539Jy sigma=0.000959 ! Fit after self-cal, rms=0.083557Jy sigma=0.000959 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263214 Jy ! Component: 100 - total flux cleaned = 0.000362885 Jy ! Component: 150 - total flux cleaned = 0.00045434 Jy ! Component: 200 - total flux cleaned = 0.000539533 Jy ! Total flux subtracted in 200 components = 0.000539533 Jy ! Clean residual min=-0.002202 max=0.002541 Jy/beam ! Clean residual mean=-0.000019 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.247211 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.247211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083528Jy sigma=0.000959 ! Fit after self-cal, rms=0.083525Jy sigma=0.000959 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083525Jy sigma=0.000959 ! Fit after self-cal, rms=0.085180Jy sigma=0.000960 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=11.87 mas, bpa=9.278 degrees ! Estimated noise=648.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233641 Jy ! Component: 100 - total flux cleaned = 0.000257321 Jy ! Component: 150 - total flux cleaned = 0.000237402 Jy ! Component: 200 - total flux cleaned = 0.000237837 Jy ! Total flux subtracted in 200 components = 0.000237837 Jy ! Clean residual min=-0.002381 max=0.003205 Jy/beam ! Clean residual mean=-0.000036 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.247449 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.247449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085152Jy sigma=0.000959 ! Fit after self-cal, rms=0.085155Jy sigma=0.000959 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.84882e-05 Jy ! Component: 100 - total flux cleaned = 1.36673e-05 Jy ! Component: 150 - total flux cleaned = 1.33101e-05 Jy ! Component: 200 - total flux cleaned = 2.97101e-05 Jy ! Total flux subtracted in 200 components = 2.97101e-05 Jy ! Clean residual min=-0.002354 max=0.003195 Jy/beam ! Clean residual mean=-0.000036 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.247479 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.247479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085135Jy sigma=0.000959 ! Fit after self-cal, rms=0.085133Jy sigma=0.000959 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.222 mas, bpa=-5.093 degrees ! Estimated noise=546.998 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.222 at -5.093 degrees (North through East) ! Clean map min=-0.0022287 max=0.20749 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=6.456 mas, bpa=-4.838 degrees ! Estimated noise=913.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159872 Jy ! Component: 100 - total flux cleaned = 0.197362 Jy ! Component: 150 - total flux cleaned = 0.213271 Jy ! Component: 200 - total flux cleaned = 0.221752 Jy ! Total flux subtracted in 200 components = 0.221752 Jy ! Clean residual min=-0.004661 max=0.004698 Jy/beam ! Clean residual mean=-0.000049 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.221752 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.221752 Jy ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.222 mas, bpa=-5.093 degrees ! Estimated noise=546.998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750065 Jy ! Component: 100 - total flux cleaned = 0.0121252 Jy ! Component: 150 - total flux cleaned = 0.0154066 Jy ! Component: 200 - total flux cleaned = 0.0178509 Jy ! Total flux subtracted in 200 components = 0.0178509 Jy ! Clean residual min=-0.002586 max=0.002831 Jy/beam ! Clean residual mean=-0.000045 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.239603 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.239603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=11.87 mas, bpa=9.278 degrees ! Estimated noise=648.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220806 Jy ! Component: 100 - total flux cleaned = 0.00359946 Jy ! Component: 150 - total flux cleaned = 0.00461416 Jy ! Component: 200 - total flux cleaned = 0.00536944 Jy ! Total flux subtracted in 200 components = 0.00536944 Jy ! Clean residual min=-0.002716 max=0.003262 Jy/beam ! Clean residual mean=-0.000052 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.244972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031401 Jy ! Component: 100 - total flux cleaned = 0.000548182 Jy ! Component: 150 - total flux cleaned = 0.0007211 Jy ! Component: 200 - total flux cleaned = 0.00089562 Jy ! Total flux subtracted in 200 components = 0.00089562 Jy ! Clean residual min=-0.002610 max=0.003204 Jy/beam ! Clean residual mean=-0.000046 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.245868 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.245868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.222 mas, bpa=-5.093 degrees ! Estimated noise=546.998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488563 Jy ! Component: 100 - total flux cleaned = 0.00041472 Jy ! Component: 150 - total flux cleaned = 0.000381869 Jy ! Component: 200 - total flux cleaned = 0.000381863 Jy ! Total flux subtracted in 200 components = 0.000381863 Jy ! Clean residual min=-0.002200 max=0.002488 Jy/beam ! Clean residual mean=-0.000022 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.246249 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.246249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085100Jy sigma=0.000959 ! Fit after self-cal, rms=0.085064Jy sigma=0.000959 wmodel J1105+0202_S_2014_01_04_pus_map.mod ! Writing 95 model components to file: J1105+0202_S_2014_01_04_pus_map.mod wobs J1105+0202_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1105+0202_S_2014_01_04_pus_uvs.fits wwins J1105+0202_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1105+0202_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942267 Jy ! Component: 100 - total flux cleaned = 0.0013787 Jy ! Component: 150 - total flux cleaned = 0.00167709 Jy ! Component: 200 - total flux cleaned = 0.00192632 Jy ! Component: 250 - total flux cleaned = 0.00202839 Jy ! Component: 300 - total flux cleaned = 0.00196319 Jy ! Component: 350 - total flux cleaned = 0.00180574 Jy ! Component: 400 - total flux cleaned = 0.00159396 Jy ! Component: 450 - total flux cleaned = 0.00141926 Jy ! Component: 500 - total flux cleaned = 0.00124885 Jy ! Component: 550 - total flux cleaned = 0.00108224 Jy ! Component: 600 - total flux cleaned = 0.000839952 Jy ! Component: 650 - total flux cleaned = 0.000682163 Jy ! Component: 700 - total flux cleaned = 0.000502756 Jy ! Component: 750 - total flux cleaned = 0.000277337 Jy ! Component: 800 - total flux cleaned = 0.000130839 Jy ! Component: 850 - total flux cleaned = -8.37646e-05 Jy ! Component: 900 - total flux cleaned = -0.000247711 Jy ! Component: 950 - total flux cleaned = -0.000407331 Jy ! Component: 1000 - total flux cleaned = -0.000631153 Jy ! Component: 1050 - total flux cleaned = -0.000850553 Jy ! Component: 1100 - total flux cleaned = -0.00100122 Jy ! Component: 1150 - total flux cleaned = -0.00117049 Jy ! Component: 1200 - total flux cleaned = -0.00131583 Jy ! Component: 1250 - total flux cleaned = -0.001418 Jy ! Component: 1300 - total flux cleaned = -0.00151812 Jy ! Component: 1350 - total flux cleaned = -0.00157741 Jy ! Component: 1400 - total flux cleaned = -0.00167441 Jy ! Component: 1450 - total flux cleaned = -0.00176955 Jy ! Component: 1500 - total flux cleaned = -0.0018067 Jy ! Component: 1550 - total flux cleaned = -0.0018801 Jy ! Component: 1600 - total flux cleaned = -0.00193416 Jy ! Component: 1650 - total flux cleaned = -0.00198783 Jy ! Component: 1700 - total flux cleaned = -0.00202299 Jy ! Component: 1750 - total flux cleaned = -0.00207527 Jy ! Component: 1800 - total flux cleaned = -0.00209273 Jy ! Component: 1850 - total flux cleaned = -0.00217733 Jy ! Component: 1900 - total flux cleaned = -0.00222696 Jy ! Component: 1950 - total flux cleaned = -0.00219422 Jy ! Component: 2000 - total flux cleaned = -0.00229173 Jy ! Component: 2050 - total flux cleaned = -0.00235593 Jy ! Component: 2100 - total flux cleaned = -0.00238781 Jy ! Component: 2150 - total flux cleaned = -0.00243478 Jy ! Component: 2200 - total flux cleaned = -0.00249688 Jy ! Component: 2250 - total flux cleaned = -0.0025582 Jy ! Component: 2300 - total flux cleaned = -0.00257347 Jy ! Component: 2350 - total flux cleaned = -0.00266331 Jy ! Component: 2400 - total flux cleaned = -0.00266328 Jy ! Component: 2450 - total flux cleaned = -0.00272184 Jy ! Component: 2500 - total flux cleaned = -0.00276519 Jy ! Component: 2550 - total flux cleaned = -0.00277957 Jy ! Component: 2600 - total flux cleaned = -0.00279366 Jy ! Component: 2650 - total flux cleaned = -0.00283582 Jy ! Component: 2700 - total flux cleaned = -0.00286375 Jy ! Component: 2750 - total flux cleaned = -0.00287747 Jy ! Component: 2800 - total flux cleaned = -0.00290492 Jy ! Component: 2850 - total flux cleaned = -0.002905 Jy ! Component: 2900 - total flux cleaned = -0.00295883 Jy ! Component: 2950 - total flux cleaned = -0.00298545 Jy ! Component: 3000 - total flux cleaned = -0.0029723 Jy ! Component: 3050 - total flux cleaned = -0.00301168 Jy ! Component: 3100 - total flux cleaned = -0.00305063 Jy ! Component: 3150 - total flux cleaned = -0.00306361 Jy ! Component: 3200 - total flux cleaned = -0.00314032 Jy ! Component: 3250 - total flux cleaned = -0.00320356 Jy ! Component: 3300 - total flux cleaned = -0.00326633 Jy ! Component: 3350 - total flux cleaned = -0.00322881 Jy ! Component: 3400 - total flux cleaned = -0.00329088 Jy ! Component: 3450 - total flux cleaned = -0.00332788 Jy ! Component: 3500 - total flux cleaned = -0.00335239 Jy ! Component: 3550 - total flux cleaned = -0.0034011 Jy ! Component: 3600 - total flux cleaned = -0.00341318 Jy ! Component: 3650 - total flux cleaned = -0.00344921 Jy ! Component: 3700 - total flux cleaned = -0.00349698 Jy ! Component: 3750 - total flux cleaned = -0.00349699 Jy ! Component: 3800 - total flux cleaned = -0.00354416 Jy ! Component: 3850 - total flux cleaned = -0.00355596 Jy ! Component: 3900 - total flux cleaned = -0.00354427 Jy ! Component: 3950 - total flux cleaned = -0.00357915 Jy ! Component: 4000 - total flux cleaned = -0.00361386 Jy ! Component: 4050 - total flux cleaned = -0.00367123 Jy ! Total flux subtracted in 4096 components = -0.00369408 Jy ! Clean residual min=-0.000616 max=0.000648 Jy/beam ! Clean residual mean=-0.000005 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.242555 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 364 components and 0.242555 Jy ![Exited script file: muppet] wmap "J1105+0202_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.222 at -5.093 degrees (North through East) ! Clean map min=-0.0020779 max=0.21068 Jy/beam ! Writing clean map to FITS file: J1105+0202_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.21068 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.291926 0.291926 0.583851 1.1677 2.3354 4.67081 9.34162 18.6832 37.3665 74.7329 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.21 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.222 at -5.093 degrees (North through East) ! Clean map min=-0.0020779 max=0.21068 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1105+0202_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:49 2017