! Started logfile: J1104-2431_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:24:47 2016 obs J1104-2431_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1104-2431_S_2014_08_05_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.728352 visibilities/baseline/integration-bin. ! Found source: J1104-2431 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1104-2431_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.598434Jy sigma=0.004869 ! Fit after self-cal, rms=0.554750Jy sigma=0.004515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=10.7 mas, bpa=17.5 degrees ! Estimated noise=1377.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.350367 Jy ! Component: 100 - total flux cleaned = 0.429805 Jy ! Total flux subtracted in 100 components = 0.429805 Jy ! Clean residual min=-0.017922 max=0.031741 Jy/beam ! Clean residual mean=-0.000069 rms=0.005867 Jy/beam ! Combined flux in latest and established models = 0.429805 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.429805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151281Jy sigma=0.001140 ! Fit after self-cal, rms=0.151269Jy sigma=0.001140 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=12.68 mas, bpa=16.3 degrees ! Estimated noise=988.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533358 Jy ! Component: 100 - total flux cleaned = 0.0817096 Jy ! Component: 150 - total flux cleaned = 0.0979445 Jy ! Component: 200 - total flux cleaned = 0.107828 Jy ! Total flux subtracted in 200 components = 0.107828 Jy ! Clean residual min=-0.013781 max=0.017025 Jy/beam ! Clean residual mean=-0.000044 rms=0.003463 Jy/beam ! Combined flux in latest and established models = 0.537632 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 63 components and 0.537632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132016Jy sigma=0.000960 ! Fit after self-cal, rms=0.131938Jy sigma=0.000960 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.85 HN 1.10 KP 1.06 ! LA 1.11 MK 1.00* NL 1.07 OV 0.96 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.15 KP 1.01 ! LA 1.06 MK 1.00* NL 0.97 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.16 HN 1.14 KP 0.89 ! LA 0.85 MK 1.00* NL 0.97 OV 0.93 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.14 KP 0.87 ! LA 0.81 MK 1.00* NL 1.07 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.131938Jy sigma=0.000960 ! Fit after self-cal, rms=0.118935Jy sigma=0.000853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.057 mas, bmaj=12.9 mas, bpa=16.82 degrees ! Estimated noise=983.148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00889582 Jy ! Component: 100 - total flux cleaned = -0.0100194 Jy ! Component: 150 - total flux cleaned = -0.0107625 Jy ! Component: 200 - total flux cleaned = -0.0116337 Jy ! Total flux subtracted in 200 components = -0.0116337 Jy ! Clean residual min=-0.011198 max=0.012116 Jy/beam ! Clean residual mean=-0.000024 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.525999 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.525999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117244Jy sigma=0.000844 ! Fit after self-cal, rms=0.117257Jy sigma=0.000844 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117257Jy sigma=0.000844 ! Fit after self-cal, rms=0.120436Jy sigma=0.000793 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.059 mas, bmaj=12.75 mas, bpa=16.24 degrees ! Estimated noise=982.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00495428 Jy ! Component: 100 - total flux cleaned = -0.00511487 Jy ! Component: 150 - total flux cleaned = -0.00512063 Jy ! Component: 200 - total flux cleaned = -0.00523986 Jy ! Total flux subtracted in 200 components = -0.00523986 Jy ! Clean residual min=-0.005793 max=0.004669 Jy/beam ! Clean residual mean=0.000001 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.520759 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.520759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120041Jy sigma=0.000789 ! Fit after self-cal, rms=0.120190Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77732e-05 Jy ! Component: 100 - total flux cleaned = 6.83024e-05 Jy ! Component: 150 - total flux cleaned = 6.43396e-05 Jy ! Component: 200 - total flux cleaned = 6.23818e-05 Jy ! Total flux subtracted in 200 components = 6.23818e-05 Jy ! Clean residual min=-0.005228 max=0.004705 Jy/beam ! Clean residual mean=0.000001 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.520821 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.520821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120079Jy sigma=0.000787 ! Fit after self-cal, rms=0.120076Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120076Jy sigma=0.000787 ! Fit after self-cal, rms=0.121881Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.063 mas, bmaj=12.77 mas, bpa=16.32 degrees ! Estimated noise=982.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0034022 Jy ! Component: 100 - total flux cleaned = -0.0034007 Jy ! Component: 150 - total flux cleaned = -0.00349058 Jy ! Component: 200 - total flux cleaned = -0.00348643 Jy ! Total flux subtracted in 200 components = -0.00348643 Jy ! Clean residual min=-0.004684 max=0.004424 Jy/beam ! Clean residual mean=-0.000000 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.517335 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.517335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121705Jy sigma=0.000785 ! Fit after self-cal, rms=0.121719Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06852e-05 Jy ! Component: 100 - total flux cleaned = -7.54469e-06 Jy ! Component: 150 - total flux cleaned = -5.08419e-06 Jy ! Component: 200 - total flux cleaned = 5.12506e-05 Jy ! Total flux subtracted in 200 components = 5.12506e-05 Jy ! Clean residual min=-0.004286 max=0.004516 Jy/beam ! Clean residual mean=0.000000 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.517386 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.517386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121669Jy sigma=0.000784 ! Fit after self-cal, rms=0.121669Jy sigma=0.000784 ! Inverting map ! Added new window around map position (-10.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427036 Jy ! Component: 100 - total flux cleaned = 0.00521498 Jy ! Component: 150 - total flux cleaned = 0.005293 Jy ! Component: 200 - total flux cleaned = 0.00529334 Jy ! Total flux subtracted in 200 components = 0.00529334 Jy ! Clean residual min=-0.003696 max=0.003082 Jy/beam ! Clean residual mean=0.000006 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.522679 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.522679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121495Jy sigma=0.000783 ! Fit after self-cal, rms=0.121486Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121486Jy sigma=0.000782 ! Fit after self-cal, rms=0.122773Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.356 mas, bmaj=19.36 mas, bpa=7.196 degrees ! Estimated noise=1099.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138064 Jy ! Component: 100 - total flux cleaned = -0.00144503 Jy ! Component: 150 - total flux cleaned = -0.00148552 Jy ! Component: 200 - total flux cleaned = -0.00156683 Jy ! Total flux subtracted in 200 components = -0.00156683 Jy ! Clean residual min=-0.003049 max=0.002534 Jy/beam ! Clean residual mean=0.000008 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.521112 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 119 components and 0.521112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122722Jy sigma=0.000781 ! Fit after self-cal, rms=0.122733Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284325 Jy ! Component: 100 - total flux cleaned = 0.000398452 Jy ! Component: 150 - total flux cleaned = 0.000333484 Jy ! Component: 200 - total flux cleaned = 0.000275671 Jy ! Total flux subtracted in 200 components = 0.000275671 Jy ! Clean residual min=-0.002944 max=0.002580 Jy/beam ! Clean residual mean=0.000008 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.521388 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.521388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122718Jy sigma=0.000781 ! Fit after self-cal, rms=0.122721Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.062 mas, bmaj=12.77 mas, bpa=16.37 degrees ! Estimated noise=981.321 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.062 x 12.77 at 16.37 degrees (North through East) ! Clean map min=-0.0033227 max=0.45444 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=10.73 mas, bpa=17.46 degrees ! Estimated noise=1385.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.352052 Jy ! Component: 100 - total flux cleaned = 0.430706 Jy ! Component: 150 - total flux cleaned = 0.460914 Jy ! Component: 200 - total flux cleaned = 0.477193 Jy ! Total flux subtracted in 200 components = 0.477193 Jy ! Clean residual min=-0.005318 max=0.008286 Jy/beam ! Clean residual mean=-0.000013 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.477194 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.477194 Jy ! Inverting map and beam ! Estimated beam: bmin=4.062 mas, bmaj=12.77 mas, bpa=16.37 degrees ! Estimated noise=981.321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015301 Jy ! Component: 100 - total flux cleaned = 0.0243211 Jy ! Component: 150 - total flux cleaned = 0.0300704 Jy ! Component: 200 - total flux cleaned = 0.0339825 Jy ! Total flux subtracted in 200 components = 0.0339825 Jy ! Clean residual min=-0.003547 max=0.003169 Jy/beam ! Clean residual mean=-0.000004 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.511176 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 100 components and 0.511176 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.356 mas, bmaj=19.36 mas, bpa=7.196 degrees ! Estimated noise=1099.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365339 Jy ! Component: 100 - total flux cleaned = 0.00581293 Jy ! Component: 150 - total flux cleaned = 0.00693424 Jy ! Component: 200 - total flux cleaned = 0.00739284 Jy ! Total flux subtracted in 200 components = 0.00739284 Jy ! Clean residual min=-0.002895 max=0.002552 Jy/beam ! Clean residual mean=0.000003 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.518569 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381489 Jy ! Component: 100 - total flux cleaned = 0.000700988 Jy ! Component: 150 - total flux cleaned = 0.000924036 Jy ! Component: 200 - total flux cleaned = 0.00109894 Jy ! Total flux subtracted in 200 components = 0.00109894 Jy ! Clean residual min=-0.002753 max=0.002580 Jy/beam ! Clean residual mean=0.000005 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.519668 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 164 components and 0.519668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.062 mas, bmaj=12.77 mas, bpa=16.37 degrees ! Estimated noise=981.321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163312 Jy ! Component: 100 - total flux cleaned = 0.000445364 Jy ! Component: 150 - total flux cleaned = 0.000643411 Jy ! Component: 200 - total flux cleaned = 0.000816107 Jy ! Total flux subtracted in 200 components = 0.000816107 Jy ! Clean residual min=-0.003176 max=0.002900 Jy/beam ! Clean residual mean=0.000005 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.520484 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 181 components and 0.520484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122663Jy sigma=0.000780 ! Fit after self-cal, rms=0.122651Jy sigma=0.000780 wmodel J1104-2431_S_2014_08_05_pus_map.mod ! Writing 181 model components to file: J1104-2431_S_2014_08_05_pus_map.mod wobs J1104-2431_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1104-2431_S_2014_08_05_pus_uvs.fits wwins J1104-2431_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1104-2431_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881864 Jy ! Component: 100 - total flux cleaned = -0.00156228 Jy ! Component: 150 - total flux cleaned = -0.00220765 Jy ! Component: 200 - total flux cleaned = -0.00265104 Jy ! Component: 250 - total flux cleaned = -0.00299455 Jy ! Component: 300 - total flux cleaned = -0.00307767 Jy ! Component: 350 - total flux cleaned = -0.0030774 Jy ! Component: 400 - total flux cleaned = -0.00295884 Jy ! Component: 450 - total flux cleaned = -0.00292055 Jy ! Component: 500 - total flux cleaned = -0.00292144 Jy ! Component: 550 - total flux cleaned = -0.00295802 Jy ! Component: 600 - total flux cleaned = -0.00295828 Jy ! Component: 650 - total flux cleaned = -0.00299389 Jy ! Component: 700 - total flux cleaned = -0.00299324 Jy ! Component: 750 - total flux cleaned = -0.00292461 Jy ! Component: 800 - total flux cleaned = -0.00282512 Jy ! Component: 850 - total flux cleaned = -0.00292385 Jy ! Component: 900 - total flux cleaned = -0.00285912 Jy ! Component: 950 - total flux cleaned = -0.00279551 Jy ! Component: 1000 - total flux cleaned = -0.0027338 Jy ! Component: 1050 - total flux cleaned = -0.00270318 Jy ! Component: 1100 - total flux cleaned = -0.00270324 Jy ! Component: 1150 - total flux cleaned = -0.00279195 Jy ! Component: 1200 - total flux cleaned = -0.00276307 Jy ! Component: 1250 - total flux cleaned = -0.00284974 Jy ! Component: 1300 - total flux cleaned = -0.00290692 Jy ! Component: 1350 - total flux cleaned = -0.00293543 Jy ! Component: 1400 - total flux cleaned = -0.00301866 Jy ! Component: 1450 - total flux cleaned = -0.00307338 Jy ! Component: 1500 - total flux cleaned = -0.00310024 Jy ! Component: 1550 - total flux cleaned = -0.00318044 Jy ! Component: 1600 - total flux cleaned = -0.00325932 Jy ! Component: 1650 - total flux cleaned = -0.003233 Jy ! Component: 1700 - total flux cleaned = -0.00315582 Jy ! Component: 1750 - total flux cleaned = -0.0032321 Jy ! Component: 1800 - total flux cleaned = -0.00313164 Jy ! Component: 1850 - total flux cleaned = -0.00318132 Jy ! Component: 1900 - total flux cleaned = -0.00313177 Jy ! Component: 1950 - total flux cleaned = -0.00301012 Jy ! Component: 2000 - total flux cleaned = -0.00305834 Jy ! Component: 2050 - total flux cleaned = -0.00305817 Jy ! Component: 2100 - total flux cleaned = -0.00296418 Jy ! Component: 2150 - total flux cleaned = -0.00296438 Jy ! Component: 2200 - total flux cleaned = -0.00294139 Jy ! Component: 2250 - total flux cleaned = -0.00282708 Jy ! Component: 2300 - total flux cleaned = -0.00280448 Jy ! Component: 2350 - total flux cleaned = -0.00278193 Jy ! Component: 2400 - total flux cleaned = -0.00275941 Jy ! Component: 2450 - total flux cleaned = -0.00264919 Jy ! Component: 2500 - total flux cleaned = -0.00264914 Jy ! Component: 2550 - total flux cleaned = -0.00256252 Jy ! Component: 2600 - total flux cleaned = -0.00260532 Jy ! Component: 2650 - total flux cleaned = -0.00252051 Jy ! Component: 2700 - total flux cleaned = -0.0025837 Jy ! Component: 2750 - total flux cleaned = -0.00256291 Jy ! Component: 2800 - total flux cleaned = -0.00248023 Jy ! Component: 2850 - total flux cleaned = -0.00250111 Jy ! Component: 2900 - total flux cleaned = -0.00258248 Jy ! Component: 2950 - total flux cleaned = -0.00248113 Jy ! Component: 3000 - total flux cleaned = -0.00244088 Jy ! Component: 3050 - total flux cleaned = -0.00244096 Jy ! Component: 3100 - total flux cleaned = -0.00236206 Jy ! Component: 3150 - total flux cleaned = -0.00234257 Jy ! Component: 3200 - total flux cleaned = -0.00238143 Jy ! Component: 3250 - total flux cleaned = -0.00224637 Jy ! Component: 3300 - total flux cleaned = -0.00232329 Jy ! Component: 3350 - total flux cleaned = -0.00226599 Jy ! Component: 3400 - total flux cleaned = -0.00219041 Jy ! Component: 3450 - total flux cleaned = -0.00217153 Jy ! Component: 3500 - total flux cleaned = -0.00217125 Jy ! Component: 3550 - total flux cleaned = -0.00204182 Jy ! Component: 3600 - total flux cleaned = -0.00202363 Jy ! Component: 3650 - total flux cleaned = -0.00204152 Jy ! Component: 3700 - total flux cleaned = -0.00205937 Jy ! Component: 3750 - total flux cleaned = -0.00195136 Jy ! Component: 3800 - total flux cleaned = -0.0019335 Jy ! Component: 3850 - total flux cleaned = -0.00189798 Jy ! Component: 3900 - total flux cleaned = -0.00186278 Jy ! Component: 3950 - total flux cleaned = -0.00182787 Jy ! Component: 4000 - total flux cleaned = -0.0018628 Jy ! Component: 4050 - total flux cleaned = -0.00179367 Jy ! Total flux subtracted in 4096 components = -0.00181089 Jy ! Clean residual min=-0.000931 max=0.000898 Jy/beam ! Clean residual mean=0.000007 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.518673 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 471 components and 0.518673 Jy ![Exited script file: muppet] wmap "J1104-2431_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.062 x 12.77 at 16.37 degrees (North through East) ! Clean map min=-0.0022161 max=0.45597 Jy/beam ! Writing clean map to FITS file: J1104-2431_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.455971 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349385 device "J1104-2431_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1104-2431_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.229873 0.229873 0.459746 0.919492 1.83898 3.67797 7.35594 14.7119 29.4237 58.8475 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.455 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.062 x 12.77 at 16.37 degrees (North through East) ! Clean map min=-0.0022161 max=0.45597 Jy/beam quit ! Quitting program ! Log file J1104-2431_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:24:53 2016