! Started logfile: J1059-1134_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:22:26 2017 obs J1059-1134_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1059-1134_S_2015_01_23_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873148 visibilities/baseline/integration-bin. ! Found source: J1059-1134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 11316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1059-1134_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885780Jy sigma=0.009291 ! Fit after self-cal, rms=0.875141Jy sigma=0.009218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=6.378 mas, bpa=-4.358 degrees ! Estimated noise=1100.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997803 Jy ! Component: 100 - total flux cleaned = 0.121606 Jy ! Total flux subtracted in 100 components = 0.121606 Jy ! Clean residual min=-0.005258 max=0.006635 Jy/beam ! Clean residual mean=0.000011 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.121606 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.121606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134812Jy sigma=0.000812 ! Fit after self-cal, rms=0.134814Jy sigma=0.000812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=7.348 mas, bpa=-4.166 degrees ! Estimated noise=658.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868361 Jy ! Component: 100 - total flux cleaned = 0.0129088 Jy ! Component: 150 - total flux cleaned = 0.0150869 Jy ! Component: 200 - total flux cleaned = 0.016252 Jy ! Total flux subtracted in 200 components = 0.016252 Jy ! Clean residual min=-0.004509 max=0.006356 Jy/beam ! Clean residual mean=0.000003 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.137858 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.137858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133822Jy sigma=0.000805 ! Fit after self-cal, rms=0.133829Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.48 HN 0.93 KP 1.06 ! LA 1.35 MK 1.00 NL 1.08 OV 0.95 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.72 HN 1.00 KP 0.97 ! LA 1.31 MK 1.02 NL 1.22 OV 0.98 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.74 HN 0.98 KP 0.84 ! LA 1.05 MK 1.01 NL 1.11 OV 0.89 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.83 HN 0.95 KP 0.79 ! LA 1.14 MK 1.02 NL 1.01 OV 0.95 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.133829Jy sigma=0.000805 ! Fit after self-cal, rms=0.105376Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.409 mas, bpa=-4.21 degrees ! Estimated noise=658.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221411 Jy ! Component: 100 - total flux cleaned = 0.000411664 Jy ! Component: 150 - total flux cleaned = 0.000539029 Jy ! Component: 200 - total flux cleaned = 0.0005914 Jy ! Total flux subtracted in 200 components = 0.0005914 Jy ! Clean residual min=-0.002446 max=0.002202 Jy/beam ! Clean residual mean=0.000009 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.138449 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.138449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105363Jy sigma=0.000780 ! Fit after self-cal, rms=0.105423Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105423Jy sigma=0.000780 ! Fit after self-cal, rms=0.106474Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.415 mas, bpa=-4.231 degrees ! Estimated noise=658.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135188 Jy ! Component: 100 - total flux cleaned = 0.000255458 Jy ! Component: 150 - total flux cleaned = 0.000348296 Jy ! Component: 200 - total flux cleaned = 0.000397557 Jy ! Total flux subtracted in 200 components = 0.000397557 Jy ! Clean residual min=-0.001961 max=0.002001 Jy/beam ! Clean residual mean=0.000003 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.138847 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.138847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106465Jy sigma=0.000777 ! Fit after self-cal, rms=0.106518Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.36612e-05 Jy ! Component: 100 - total flux cleaned = 4.29895e-06 Jy ! Component: 150 - total flux cleaned = 6.92749e-05 Jy ! Component: 200 - total flux cleaned = 0.000116751 Jy ! Total flux subtracted in 200 components = 0.000116751 Jy ! Clean residual min=-0.001957 max=0.001985 Jy/beam ! Clean residual mean=0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.138963 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.138963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106514Jy sigma=0.000777 ! Fit after self-cal, rms=0.106516Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106516Jy sigma=0.000777 ! Fit after self-cal, rms=0.106772Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.42 mas, bpa=-4.271 degrees ! Estimated noise=658.724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.10988e-05 Jy ! Component: 100 - total flux cleaned = -5.3171e-06 Jy ! Component: 150 - total flux cleaned = 4.10412e-05 Jy ! Component: 200 - total flux cleaned = 6.17663e-05 Jy ! Total flux subtracted in 200 components = 6.17663e-05 Jy ! Clean residual min=-0.001905 max=0.001944 Jy/beam ! Clean residual mean=0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.139025 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.139025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106767Jy sigma=0.000777 ! Fit after self-cal, rms=0.106775Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96646e-05 Jy ! Component: 100 - total flux cleaned = -5.12095e-06 Jy ! Component: 150 - total flux cleaned = 2.04606e-05 Jy ! Component: 200 - total flux cleaned = 3.21519e-05 Jy ! Total flux subtracted in 200 components = 3.21519e-05 Jy ! Clean residual min=-0.001900 max=0.001934 Jy/beam ! Clean residual mean=0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.139057 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.139057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106772Jy sigma=0.000777 ! Fit after self-cal, rms=0.106773Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106773Jy sigma=0.000777 ! Fit after self-cal, rms=0.106776Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.045 mas, bmaj=13.51 mas, bpa=-2.736 degrees ! Estimated noise=887.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015258 Jy ! Component: 100 - total flux cleaned = 0.000187903 Jy ! Component: 150 - total flux cleaned = 0.000214522 Jy ! Component: 200 - total flux cleaned = 0.000240456 Jy ! Total flux subtracted in 200 components = 0.000240456 Jy ! Clean residual min=-0.002046 max=0.002100 Jy/beam ! Clean residual mean=0.000005 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.139298 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 75 components and 0.139298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106780Jy sigma=0.000777 ! Fit after self-cal, rms=0.106780Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7144e-05 Jy ! Component: 100 - total flux cleaned = 5.40086e-05 Jy ! Component: 150 - total flux cleaned = 7.43203e-05 Jy ! Component: 200 - total flux cleaned = 8.97282e-05 Jy ! Total flux subtracted in 200 components = 8.97282e-05 Jy ! Clean residual min=-0.002071 max=0.002084 Jy/beam ! Clean residual mean=0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.139387 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 76 components and 0.139387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106782Jy sigma=0.000777 ! Fit after self-cal, rms=0.106782Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.425 mas, bpa=-4.317 degrees ! Estimated noise=658.522 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.943 x 7.425 at -4.317 degrees (North through East) ! Clean map min=-0.0018621 max=0.1281 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.401 mas, bmaj=6.438 mas, bpa=-4.49 degrees ! Estimated noise=1102.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0999151 Jy ! Component: 100 - total flux cleaned = 0.121859 Jy ! Component: 150 - total flux cleaned = 0.128484 Jy ! Component: 200 - total flux cleaned = 0.132325 Jy ! Total flux subtracted in 200 components = 0.132325 Jy ! Clean residual min=-0.002918 max=0.003486 Jy/beam ! Clean residual mean=0.000006 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.132325 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.132325 Jy ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.425 mas, bpa=-4.317 degrees ! Estimated noise=658.522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305841 Jy ! Component: 100 - total flux cleaned = 0.00470896 Jy ! Component: 150 - total flux cleaned = 0.00567241 Jy ! Component: 200 - total flux cleaned = 0.00609038 Jy ! Total flux subtracted in 200 components = 0.00609038 Jy ! Clean residual min=-0.001985 max=0.001965 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.138416 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.138416 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.045 mas, bmaj=13.51 mas, bpa=-2.736 degrees ! Estimated noise=887.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775026 Jy ! Component: 100 - total flux cleaned = 0.000907194 Jy ! Component: 150 - total flux cleaned = 0.000923414 Jy ! Component: 200 - total flux cleaned = 0.000943725 Jy ! Total flux subtracted in 200 components = 0.000943725 Jy ! Clean residual min=-0.002102 max=0.002077 Jy/beam ! Clean residual mean=0.000006 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.139359 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71476e-05 Jy ! Component: 100 - total flux cleaned = 3.28e-05 Jy ! Component: 150 - total flux cleaned = 4.78439e-05 Jy ! Component: 200 - total flux cleaned = 6.18409e-05 Jy ! Total flux subtracted in 200 components = 6.18409e-05 Jy ! Clean residual min=-0.002100 max=0.002073 Jy/beam ! Clean residual mean=0.000006 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.139421 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.139421 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.425 mas, bpa=-4.317 degrees ! Estimated noise=658.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303058 Jy ! Component: 100 - total flux cleaned = -0.000302071 Jy ! Component: 150 - total flux cleaned = -0.000275684 Jy ! Component: 200 - total flux cleaned = -0.000251991 Jy ! Total flux subtracted in 200 components = -0.000251991 Jy ! Clean residual min=-0.001922 max=0.001929 Jy/beam ! Clean residual mean=0.000003 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.139169 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.139169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106775Jy sigma=0.000777 ! Fit after self-cal, rms=0.106775Jy sigma=0.000777 wmodel J1059-1134_S_2015_01_23_pus_map.mod ! Writing 60 model components to file: J1059-1134_S_2015_01_23_pus_map.mod wobs J1059-1134_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1059-1134_S_2015_01_23_pus_uvs.fits wwins J1059-1134_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1059-1134_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458201 Jy ! Component: 100 - total flux cleaned = -0.00105116 Jy ! Component: 150 - total flux cleaned = -0.0015502 Jy ! Component: 200 - total flux cleaned = -0.00193602 Jy ! Component: 250 - total flux cleaned = -0.00210724 Jy ! Component: 300 - total flux cleaned = -0.00241028 Jy ! Component: 350 - total flux cleaned = -0.00267706 Jy ! Component: 400 - total flux cleaned = -0.00291018 Jy ! Component: 450 - total flux cleaned = -0.00311248 Jy ! Component: 500 - total flux cleaned = -0.00326039 Jy ! Component: 550 - total flux cleaned = -0.00345302 Jy ! Component: 600 - total flux cleaned = -0.00352392 Jy ! Component: 650 - total flux cleaned = -0.00373164 Jy ! Component: 700 - total flux cleaned = -0.00373092 Jy ! Component: 750 - total flux cleaned = -0.00379814 Jy ! Component: 800 - total flux cleaned = -0.00386429 Jy ! Component: 850 - total flux cleaned = -0.00397321 Jy ! Component: 900 - total flux cleaned = -0.00414409 Jy ! Component: 950 - total flux cleaned = -0.00416532 Jy ! Component: 1000 - total flux cleaned = -0.00435212 Jy ! Component: 1050 - total flux cleaned = -0.00443374 Jy ! Component: 1100 - total flux cleaned = -0.00457439 Jy ! Component: 1150 - total flux cleaned = -0.00463355 Jy ! Component: 1200 - total flux cleaned = -0.00469193 Jy ! Component: 1250 - total flux cleaned = -0.00476942 Jy ! Component: 1300 - total flux cleaned = -0.00473137 Jy ! Component: 1350 - total flux cleaned = -0.00488261 Jy ! Component: 1400 - total flux cleaned = -0.00486393 Jy ! Component: 1450 - total flux cleaned = -0.00486405 Jy ! Component: 1500 - total flux cleaned = -0.00493729 Jy ! Component: 1550 - total flux cleaned = -0.0049915 Jy ! Component: 1600 - total flux cleaned = -0.00497378 Jy ! Component: 1650 - total flux cleaned = -0.00502682 Jy ! Component: 1700 - total flux cleaned = -0.00509664 Jy ! Component: 1750 - total flux cleaned = -0.00513115 Jy ! Component: 1800 - total flux cleaned = -0.00511387 Jy ! Component: 1850 - total flux cleaned = -0.00513093 Jy ! Component: 1900 - total flux cleaned = -0.00518122 Jy ! Component: 1950 - total flux cleaned = -0.00519789 Jy ! Component: 2000 - total flux cleaned = -0.00518168 Jy ! Component: 2050 - total flux cleaned = -0.00527929 Jy ! Component: 2100 - total flux cleaned = -0.00529543 Jy ! Component: 2150 - total flux cleaned = -0.00537492 Jy ! Component: 2200 - total flux cleaned = -0.00540647 Jy ! Component: 2250 - total flux cleaned = -0.00545333 Jy ! Component: 2300 - total flux cleaned = -0.0055153 Jy ! Component: 2350 - total flux cleaned = -0.00554591 Jy ! Component: 2400 - total flux cleaned = -0.00557636 Jy ! Component: 2450 - total flux cleaned = -0.00562161 Jy ! Component: 2500 - total flux cleaned = -0.00569653 Jy ! Component: 2550 - total flux cleaned = -0.00572636 Jy ! Component: 2600 - total flux cleaned = -0.00578522 Jy ! Component: 2650 - total flux cleaned = -0.00585809 Jy ! Component: 2700 - total flux cleaned = -0.00590156 Jy ! Component: 2750 - total flux cleaned = -0.00595893 Jy ! Component: 2800 - total flux cleaned = -0.00597317 Jy ! Component: 2850 - total flux cleaned = -0.00598725 Jy ! Component: 2900 - total flux cleaned = -0.00604321 Jy ! Component: 2950 - total flux cleaned = -0.00600138 Jy ! Component: 3000 - total flux cleaned = -0.0059876 Jy ! Component: 3050 - total flux cleaned = -0.00598767 Jy ! Component: 3100 - total flux cleaned = -0.00602838 Jy ! Component: 3150 - total flux cleaned = -0.00606886 Jy ! Component: 3200 - total flux cleaned = -0.00601494 Jy ! Component: 3250 - total flux cleaned = -0.00604149 Jy ! Component: 3300 - total flux cleaned = -0.006068 Jy ! Component: 3350 - total flux cleaned = -0.00600234 Jy ! Component: 3400 - total flux cleaned = -0.00606785 Jy ! Component: 3450 - total flux cleaned = -0.00605498 Jy ! Component: 3500 - total flux cleaned = -0.00600334 Jy ! Component: 3550 - total flux cleaned = -0.00600341 Jy ! Component: 3600 - total flux cleaned = -0.00600354 Jy ! Component: 3650 - total flux cleaned = -0.00599098 Jy ! Component: 3700 - total flux cleaned = -0.00596586 Jy ! Component: 3750 - total flux cleaned = -0.00604099 Jy ! Component: 3800 - total flux cleaned = -0.00600363 Jy ! Component: 3850 - total flux cleaned = -0.00601613 Jy ! Component: 3900 - total flux cleaned = -0.00599163 Jy ! Component: 3950 - total flux cleaned = -0.00604054 Jy ! Component: 4000 - total flux cleaned = -0.0060284 Jy ! Component: 4050 - total flux cleaned = -0.00602847 Jy ! Total flux subtracted in 4096 components = -0.00600449 Jy ! Clean residual min=-0.000674 max=0.000820 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.133165 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 344 components and 0.133165 Jy ![Exited script file: muppet] wmap "J1059-1134_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.943 x 7.425 at -4.317 degrees (North through East) ! Clean map min=-0.0017729 max=0.12842 Jy/beam ! Writing clean map to FITS file: J1059-1134_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128418 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218449 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510326 0.510326 1.02065 2.0413 4.08261 8.16521 16.3304 32.6608 65.3217 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.943 x 7.425 at -4.317 degrees (North through East) ! Clean map min=-0.0017729 max=0.12842 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1059-1134_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:22:31 2017