! Started logfile: J1058+8114_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:23 2017 obs J1058+8114_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1058+8114_S_2014_01_04_pus_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1058+8114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1058+8114_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.748681Jy sigma=0.010689 ! Fit after self-cal, rms=0.744448Jy sigma=0.010621 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=6.179 mas, bpa=78.84 degrees ! Estimated noise=1385.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196337 Jy ! Component: 100 - total flux cleaned = 0.239548 Jy ! Total flux subtracted in 100 components = 0.239548 Jy ! Clean residual min=-0.010507 max=0.017510 Jy/beam ! Clean residual mean=-0.000072 rms=0.003212 Jy/beam ! Combined flux in latest and established models = 0.239548 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.239548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102230Jy sigma=0.001202 ! Fit after self-cal, rms=0.102204Jy sigma=0.001202 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=7.099 mas, bpa=76.81 degrees ! Estimated noise=918.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213139 Jy ! Component: 100 - total flux cleaned = 0.0329918 Jy ! Component: 150 - total flux cleaned = 0.0401772 Jy ! Component: 200 - total flux cleaned = 0.0446518 Jy ! Total flux subtracted in 200 components = 0.0446518 Jy ! Clean residual min=-0.011438 max=0.013497 Jy/beam ! Clean residual mean=-0.000071 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.284199 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.284199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096432Jy sigma=0.001151 ! Fit after self-cal, rms=0.096507Jy sigma=0.001151 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.03 ! MK 1.13 NL 0.92 OV 0.96 PT 0.99 ! SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.98 ! MK 1.14 NL 1.00 OV 0.98 PT 0.97 ! SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.83 ! MK 1.17 NL 0.95 OV 0.93 PT 0.96 ! SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.89 ! MK 1.19 NL 1.02 OV 0.98 PT 1.00 ! SC 0.84 ! ! ! Fit before self-cal, rms=0.096507Jy sigma=0.001151 ! Fit after self-cal, rms=0.089195Jy sigma=0.001050 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=7.127 mas, bpa=75.64 degrees ! Estimated noise=917.197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266076 Jy ! Component: 100 - total flux cleaned = -0.00279164 Jy ! Component: 150 - total flux cleaned = -0.00299502 Jy ! Component: 200 - total flux cleaned = -0.00307575 Jy ! Total flux subtracted in 200 components = -0.00307575 Jy ! Clean residual min=-0.005855 max=0.005913 Jy/beam ! Clean residual mean=-0.000024 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.281124 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.281124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088661Jy sigma=0.001047 ! Fit after self-cal, rms=0.088330Jy sigma=0.001046 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088330Jy sigma=0.001046 ! Fit after self-cal, rms=0.091640Jy sigma=0.001032 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.048 mas, bpa=76.19 degrees ! Estimated noise=916.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122221 Jy ! Component: 100 - total flux cleaned = 0.00114634 Jy ! Component: 150 - total flux cleaned = 0.00102992 Jy ! Component: 200 - total flux cleaned = 0.000935419 Jy ! Total flux subtracted in 200 components = 0.000935419 Jy ! Clean residual min=-0.003280 max=0.003818 Jy/beam ! Clean residual mean=-0.000016 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.282059 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.282059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091515Jy sigma=0.001031 ! Fit after self-cal, rms=0.091497Jy sigma=0.001031 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86625e-05 Jy ! Component: 100 - total flux cleaned = -0.000129233 Jy ! Component: 150 - total flux cleaned = -0.000256068 Jy ! Component: 200 - total flux cleaned = -0.00034208 Jy ! Total flux subtracted in 200 components = -0.00034208 Jy ! Clean residual min=-0.003259 max=0.003791 Jy/beam ! Clean residual mean=-0.000017 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.281717 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.281717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091463Jy sigma=0.001031 ! Fit after self-cal, rms=0.091467Jy sigma=0.001031 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091467Jy sigma=0.001031 ! Fit after self-cal, rms=0.106099Jy sigma=0.001042 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.06 mas, bpa=77.39 degrees ! Estimated noise=934.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014695 Jy ! Component: 100 - total flux cleaned = 0.000619051 Jy ! Component: 150 - total flux cleaned = -0.000201278 Jy ! Component: 200 - total flux cleaned = -0.000776385 Jy ! Total flux subtracted in 200 components = -0.000776385 Jy ! Clean residual min=-0.005634 max=0.004625 Jy/beam ! Clean residual mean=-0.000019 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.280941 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.280941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105309Jy sigma=0.001038 ! Fit after self-cal, rms=0.105349Jy sigma=0.001038 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392327 Jy ! Component: 100 - total flux cleaned = -0.000651912 Jy ! Component: 150 - total flux cleaned = -0.000804626 Jy ! Component: 200 - total flux cleaned = -0.000940265 Jy ! Total flux subtracted in 200 components = -0.000940265 Jy ! Clean residual min=-0.005526 max=0.004131 Jy/beam ! Clean residual mean=-0.000021 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.28 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.28 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105113Jy sigma=0.001037 ! Fit after self-cal, rms=0.105103Jy sigma=0.001037 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105103Jy sigma=0.001037 ! Fit after self-cal, rms=0.111973Jy sigma=0.001040 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.243 mas, bmaj=11.79 mas, bpa=79.66 degrees ! Estimated noise=1087.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103917 Jy ! Component: 100 - total flux cleaned = 0.00114252 Jy ! Component: 150 - total flux cleaned = 0.00114354 Jy ! Component: 200 - total flux cleaned = 0.00114515 Jy ! Total flux subtracted in 200 components = 0.00114515 Jy ! Clean residual min=-0.003126 max=0.003427 Jy/beam ! Clean residual mean=-0.000030 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.281145 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.281145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111757Jy sigma=0.001039 ! Fit after self-cal, rms=0.111797Jy sigma=0.001039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.44264e-05 Jy ! Component: 100 - total flux cleaned = -5.26476e-06 Jy ! Component: 150 - total flux cleaned = -5.59294e-05 Jy ! Component: 200 - total flux cleaned = -7.8377e-05 Jy ! Total flux subtracted in 200 components = -7.8377e-05 Jy ! Clean residual min=-0.003087 max=0.003421 Jy/beam ! Clean residual mean=-0.000031 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.281067 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 74 components and 0.281067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111688Jy sigma=0.001039 ! Fit after self-cal, rms=0.111684Jy sigma=0.001039 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.093 mas, bpa=78.27 degrees ! Estimated noise=948.638 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.093 at 78.27 degrees (North through East) ! Clean map min=-0.005033 max=0.26379 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=6.177 mas, bpa=80.32 degrees ! Estimated noise=1442.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204433 Jy ! Component: 100 - total flux cleaned = 0.249866 Jy ! Component: 150 - total flux cleaned = 0.263951 Jy ! Component: 200 - total flux cleaned = 0.269635 Jy ! Total flux subtracted in 200 components = 0.269635 Jy ! Clean residual min=-0.007907 max=0.006260 Jy/beam ! Clean residual mean=-0.000016 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.269635 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.269635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.093 mas, bpa=78.27 degrees ! Estimated noise=948.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, -77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064182 Jy ! Component: 100 - total flux cleaned = 0.00691442 Jy ! Component: 150 - total flux cleaned = 0.00726886 Jy ! Component: 200 - total flux cleaned = 0.00747271 Jy ! Total flux subtracted in 200 components = 0.00747271 Jy ! Clean residual min=-0.004957 max=0.004402 Jy/beam ! Clean residual mean=-0.000027 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.277108 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 0.277108 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.243 mas, bmaj=11.79 mas, bpa=79.66 degrees ! Estimated noise=1087.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193509 Jy ! Component: 100 - total flux cleaned = 0.00241216 Jy ! Component: 150 - total flux cleaned = 0.00262393 Jy ! Component: 200 - total flux cleaned = 0.00280531 Jy ! Total flux subtracted in 200 components = 0.00280531 Jy ! Clean residual min=-0.003122 max=0.003151 Jy/beam ! Clean residual mean=-0.000040 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.279913 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194383 Jy ! Component: 100 - total flux cleaned = 0.00036994 Jy ! Component: 150 - total flux cleaned = 0.000533821 Jy ! Component: 200 - total flux cleaned = 0.000662901 Jy ! Total flux subtracted in 200 components = 0.000662901 Jy ! Clean residual min=-0.003123 max=0.003092 Jy/beam ! Clean residual mean=-0.000036 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.280576 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.280576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.093 mas, bpa=78.27 degrees ! Estimated noise=948.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319872 Jy ! Component: 100 - total flux cleaned = -0.000391048 Jy ! Component: 150 - total flux cleaned = -0.000517218 Jy ! Component: 200 - total flux cleaned = -0.000459248 Jy ! Total flux subtracted in 200 components = -0.000459248 Jy ! Clean residual min=-0.004820 max=0.004010 Jy/beam ! Clean residual mean=-0.000019 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.280117 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.280117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110469Jy sigma=0.001034 ! Fit after self-cal, rms=0.110330Jy sigma=0.001033 wmodel J1058+8114_S_2014_01_04_pus_map.mod ! Writing 84 model components to file: J1058+8114_S_2014_01_04_pus_map.mod wobs J1058+8114_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1058+8114_S_2014_01_04_pus_uvs.fits wwins J1058+8114_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1058+8114_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016458 Jy ! Component: 100 - total flux cleaned = -0.00241974 Jy ! Component: 150 - total flux cleaned = -0.00287767 Jy ! Component: 200 - total flux cleaned = -0.0028784 Jy ! Component: 250 - total flux cleaned = -0.002761 Jy ! Component: 300 - total flux cleaned = -0.00265096 Jy ! Component: 350 - total flux cleaned = -0.00254398 Jy ! Component: 400 - total flux cleaned = -0.00228387 Jy ! Component: 450 - total flux cleaned = -0.0022819 Jy ! Component: 500 - total flux cleaned = -0.0024765 Jy ! Component: 550 - total flux cleaned = -0.00262022 Jy ! Component: 600 - total flux cleaned = -0.0028063 Jy ! Component: 650 - total flux cleaned = -0.00289712 Jy ! Component: 700 - total flux cleaned = -0.00298651 Jy ! Component: 750 - total flux cleaned = -0.00311749 Jy ! Component: 800 - total flux cleaned = -0.00328849 Jy ! Component: 850 - total flux cleaned = -0.0034139 Jy ! Component: 900 - total flux cleaned = -0.00353679 Jy ! Component: 950 - total flux cleaned = -0.00345707 Jy ! Component: 1000 - total flux cleaned = -0.00345778 Jy ! Component: 1050 - total flux cleaned = -0.00349723 Jy ! Component: 1100 - total flux cleaned = -0.00353563 Jy ! Component: 1150 - total flux cleaned = -0.00364819 Jy ! Component: 1200 - total flux cleaned = -0.00379545 Jy ! Component: 1250 - total flux cleaned = -0.00383144 Jy ! Component: 1300 - total flux cleaned = -0.00390306 Jy ! Component: 1350 - total flux cleaned = -0.00393848 Jy ! Component: 1400 - total flux cleaned = -0.00397352 Jy ! Component: 1450 - total flux cleaned = -0.00400781 Jy ! Component: 1500 - total flux cleaned = -0.00400784 Jy ! Component: 1550 - total flux cleaned = -0.00407573 Jy ! Component: 1600 - total flux cleaned = -0.00417627 Jy ! Component: 1650 - total flux cleaned = -0.00414253 Jy ! Component: 1700 - total flux cleaned = -0.00417504 Jy ! Component: 1750 - total flux cleaned = -0.00420741 Jy ! Component: 1800 - total flux cleaned = -0.00420731 Jy ! Component: 1850 - total flux cleaned = -0.00423925 Jy ! Component: 1900 - total flux cleaned = -0.00417612 Jy ! Component: 1950 - total flux cleaned = -0.00420738 Jy ! Component: 2000 - total flux cleaned = -0.00417621 Jy ! Component: 2050 - total flux cleaned = -0.00417627 Jy ! Component: 2100 - total flux cleaned = -0.00417615 Jy ! Component: 2150 - total flux cleaned = -0.00411542 Jy ! Component: 2200 - total flux cleaned = -0.00408527 Jy ! Component: 2250 - total flux cleaned = -0.00405557 Jy ! Component: 2300 - total flux cleaned = -0.00393724 Jy ! Component: 2350 - total flux cleaned = -0.00390795 Jy ! Component: 2400 - total flux cleaned = -0.00385008 Jy ! Component: 2450 - total flux cleaned = -0.00382159 Jy ! Component: 2500 - total flux cleaned = -0.00387905 Jy ! Component: 2550 - total flux cleaned = -0.00382184 Jy ! Component: 2600 - total flux cleaned = -0.00379351 Jy ! Component: 2650 - total flux cleaned = -0.00376547 Jy ! Component: 2700 - total flux cleaned = -0.0037933 Jy ! Component: 2750 - total flux cleaned = -0.00370992 Jy ! Component: 2800 - total flux cleaned = -0.00373765 Jy ! Component: 2850 - total flux cleaned = -0.00365521 Jy ! Component: 2900 - total flux cleaned = -0.00360066 Jy ! Component: 2950 - total flux cleaned = -0.00362793 Jy ! Component: 3000 - total flux cleaned = -0.00357413 Jy ! Component: 3050 - total flux cleaned = -0.00357411 Jy ! Component: 3100 - total flux cleaned = -0.00357397 Jy ! Component: 3150 - total flux cleaned = -0.00349421 Jy ! Component: 3200 - total flux cleaned = -0.00346768 Jy ! Component: 3250 - total flux cleaned = -0.00341498 Jy ! Component: 3300 - total flux cleaned = -0.00349361 Jy ! Component: 3350 - total flux cleaned = -0.003389 Jy ! Component: 3400 - total flux cleaned = -0.00333699 Jy ! Component: 3450 - total flux cleaned = -0.00336277 Jy ! Component: 3500 - total flux cleaned = -0.00336257 Jy ! Component: 3550 - total flux cleaned = -0.00323434 Jy ! Component: 3600 - total flux cleaned = -0.00325979 Jy ! Component: 3650 - total flux cleaned = -0.00318338 Jy ! Component: 3700 - total flux cleaned = -0.00313277 Jy ! Component: 3750 - total flux cleaned = -0.00303197 Jy ! Component: 3800 - total flux cleaned = -0.00300686 Jy ! Component: 3850 - total flux cleaned = -0.00293168 Jy ! Component: 3900 - total flux cleaned = -0.00285687 Jy ! Component: 3950 - total flux cleaned = -0.0027822 Jy ! Component: 4000 - total flux cleaned = -0.00273264 Jy ! Component: 4050 - total flux cleaned = -0.00268315 Jy ! Total flux subtracted in 4096 components = -0.00260909 Jy ! Clean residual min=-0.001407 max=0.001487 Jy/beam ! Clean residual mean=-0.000002 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.277508 Jy keep ! Adding 218 model components to the UV plane model. ! The established model now contains 302 components and 0.277508 Jy ![Exited script file: muppet] wmap "J1058+8114_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.093 at 78.27 degrees (North through East) ! Clean map min=-0.0035229 max=0.26598 Jy/beam ! Writing clean map to FITS file: J1058+8114_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.265979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000414804 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.467861 0.467861 0.935722 1.87144 3.74289 7.48578 14.9716 29.9431 59.8862 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.265 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.093 at 78.27 degrees (North through East) ! Clean map min=-0.0035229 max=0.26598 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1058+8114_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:27 2017