! Started logfile: J1057-2509_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:24:37 2016 obs J1057-2509_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1057-2509_S_2014_08_05_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764848 visibilities/baseline/integration-bin. ! Found source: J1057-2509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1057-2509_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.719361Jy sigma=0.005773 ! Fit after self-cal, rms=0.688494Jy sigma=0.005528 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=10.67 mas, bpa=18.22 degrees ! Estimated noise=1324.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243961 Jy ! Component: 100 - total flux cleaned = 0.298979 Jy ! Total flux subtracted in 100 components = 0.298979 Jy ! Clean residual min=-0.012593 max=0.022643 Jy/beam ! Clean residual mean=0.000018 rms=0.004070 Jy/beam ! Combined flux in latest and established models = 0.298979 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.298979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145570Jy sigma=0.000966 ! Fit after self-cal, rms=0.145580Jy sigma=0.000966 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.036 mas, bmaj=12.73 mas, bpa=16.7 degrees ! Estimated noise=1031.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335683 Jy ! Component: 100 - total flux cleaned = 0.0517482 Jy ! Component: 150 - total flux cleaned = 0.0623055 Jy ! Component: 200 - total flux cleaned = 0.0687605 Jy ! Total flux subtracted in 200 components = 0.0687605 Jy ! Clean residual min=-0.010697 max=0.011159 Jy/beam ! Clean residual mean=-0.000003 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.36774 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 43 components and 0.36774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136610Jy sigma=0.000898 ! Fit after self-cal, rms=0.136609Jy sigma=0.000897 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.85 HN 1.08 KP 1.09 ! LA 1.11 MK 1.00* NL 1.11 OV 0.97 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.17 KP 1.02 ! LA 1.08 MK 1.00* NL 0.89 OV 0.99 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.19 HN 1.19 KP 0.91 ! LA 0.85 MK 1.00* NL 1.00 OV 0.91 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.17 KP 0.89 ! LA 0.81 MK 1.00* NL 1.09 OV 0.98 ! PT 1.03 SC 0.94 ! ! ! Fit before self-cal, rms=0.136609Jy sigma=0.000897 ! Fit after self-cal, rms=0.125051Jy sigma=0.000835 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=12.97 mas, bpa=17.35 degrees ! Estimated noise=1030.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264297 Jy ! Component: 100 - total flux cleaned = -0.00320243 Jy ! Component: 150 - total flux cleaned = -0.00368168 Jy ! Component: 200 - total flux cleaned = -0.00422717 Jy ! Total flux subtracted in 200 components = -0.00422717 Jy ! Clean residual min=-0.008206 max=0.008977 Jy/beam ! Clean residual mean=0.000001 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.363513 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.363513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124480Jy sigma=0.000832 ! Fit after self-cal, rms=0.124499Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124499Jy sigma=0.000831 ! Fit after self-cal, rms=0.128392Jy sigma=0.000791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.029 mas, bmaj=12.83 mas, bpa=16.75 degrees ! Estimated noise=1029.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0031738 Jy ! Component: 100 - total flux cleaned = -0.00389359 Jy ! Component: 150 - total flux cleaned = -0.00401145 Jy ! Component: 200 - total flux cleaned = -0.00411511 Jy ! Total flux subtracted in 200 components = -0.00411511 Jy ! Clean residual min=-0.004856 max=0.005554 Jy/beam ! Clean residual mean=0.000012 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.359397 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.359397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128114Jy sigma=0.000788 ! Fit after self-cal, rms=0.128261Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057773 Jy ! Component: 100 - total flux cleaned = 0.00870994 Jy ! Component: 150 - total flux cleaned = 0.00908945 Jy ! Component: 200 - total flux cleaned = 0.00933733 Jy ! Total flux subtracted in 200 components = 0.00933733 Jy ! Clean residual min=-0.004118 max=0.004434 Jy/beam ! Clean residual mean=0.000024 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.368735 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 0.368735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127979Jy sigma=0.000784 ! Fit after self-cal, rms=0.127942Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127942Jy sigma=0.000784 ! Fit after self-cal, rms=0.129496Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=12.83 mas, bpa=16.84 degrees ! Estimated noise=1027.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001021 Jy ! Component: 100 - total flux cleaned = -0.00103373 Jy ! Component: 150 - total flux cleaned = -0.000794062 Jy ! Component: 200 - total flux cleaned = -0.000654372 Jy ! Total flux subtracted in 200 components = -0.000654372 Jy ! Clean residual min=-0.003672 max=0.003910 Jy/beam ! Clean residual mean=0.000017 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.36808 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 109 components and 0.36808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129359Jy sigma=0.000782 ! Fit after self-cal, rms=0.129359Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810924 Jy ! Component: 100 - total flux cleaned = 0.000927454 Jy ! Component: 150 - total flux cleaned = 0.00103714 Jy ! Component: 200 - total flux cleaned = 0.00118941 Jy ! Total flux subtracted in 200 components = 0.00118941 Jy ! Clean residual min=-0.003456 max=0.003656 Jy/beam ! Clean residual mean=0.000019 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.36927 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 126 components and 0.36927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129311Jy sigma=0.000782 ! Fit after self-cal, rms=0.129307Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129307Jy sigma=0.000782 ! Fit after self-cal, rms=0.130646Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.362 mas, bmaj=19.76 mas, bpa=7.824 degrees ! Estimated noise=1152.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106209 Jy ! Component: 100 - total flux cleaned = -0.00128739 Jy ! Component: 150 - total flux cleaned = -0.0014625 Jy ! Component: 200 - total flux cleaned = -0.00153751 Jy ! Total flux subtracted in 200 components = -0.00153751 Jy ! Clean residual min=-0.003434 max=0.003773 Jy/beam ! Clean residual mean=0.000025 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.367732 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 147 components and 0.367732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130603Jy sigma=0.000781 ! Fit after self-cal, rms=0.130610Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319385 Jy ! Component: 100 - total flux cleaned = 0.00028868 Jy ! Component: 150 - total flux cleaned = 0.000288098 Jy ! Component: 200 - total flux cleaned = 0.000237121 Jy ! Total flux subtracted in 200 components = 0.000237121 Jy ! Clean residual min=-0.003279 max=0.003764 Jy/beam ! Clean residual mean=0.000025 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.367969 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 162 components and 0.367969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130598Jy sigma=0.000781 ! Fit after self-cal, rms=0.130596Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.034 mas, bmaj=12.85 mas, bpa=16.89 degrees ! Estimated noise=1026.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.034 x 12.85 at 16.89 degrees (North through East) ! Clean map min=-0.0031431 max=0.31529 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=10.72 mas, bpa=18.41 degrees ! Estimated noise=1335.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.245864 Jy ! Component: 100 - total flux cleaned = 0.300828 Jy ! Component: 150 - total flux cleaned = 0.320708 Jy ! Component: 200 - total flux cleaned = 0.331708 Jy ! Total flux subtracted in 200 components = 0.331708 Jy ! Clean residual min=-0.004421 max=0.005937 Jy/beam ! Clean residual mean=0.000008 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.331708 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.331708 Jy ! Inverting map and beam ! Estimated beam: bmin=4.034 mas, bmaj=12.85 mas, bpa=16.89 degrees ! Estimated noise=1026.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01055 Jy ! Component: 100 - total flux cleaned = 0.0172317 Jy ! Component: 150 - total flux cleaned = 0.0219557 Jy ! Component: 200 - total flux cleaned = 0.0255032 Jy ! Total flux subtracted in 200 components = 0.0255032 Jy ! Clean residual min=-0.003212 max=0.003768 Jy/beam ! Clean residual mean=0.000010 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.357211 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 96 components and 0.357211 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.362 mas, bmaj=19.76 mas, bpa=7.824 degrees ! Estimated noise=1152.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352601 Jy ! Component: 100 - total flux cleaned = 0.00582116 Jy ! Component: 150 - total flux cleaned = 0.00739478 Jy ! Component: 200 - total flux cleaned = 0.00849389 Jy ! Total flux subtracted in 200 components = 0.00849389 Jy ! Clean residual min=-0.003148 max=0.003575 Jy/beam ! Clean residual mean=0.000025 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.365705 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644803 Jy ! Component: 100 - total flux cleaned = 0.000943504 Jy ! Component: 150 - total flux cleaned = 0.00102842 Jy ! Component: 200 - total flux cleaned = 0.00108742 Jy ! Total flux subtracted in 200 components = 0.00108742 Jy ! Clean residual min=-0.003051 max=0.003631 Jy/beam ! Clean residual mean=0.000025 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.366792 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 175 components and 0.366792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.034 mas, bmaj=12.85 mas, bpa=16.89 degrees ! Estimated noise=1026.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212984 Jy ! Component: 100 - total flux cleaned = -7.35199e-05 Jy ! Component: 150 - total flux cleaned = 5.07164e-05 Jy ! Component: 200 - total flux cleaned = 0.000193301 Jy ! Total flux subtracted in 200 components = 0.000193301 Jy ! Clean residual min=-0.003002 max=0.003367 Jy/beam ! Clean residual mean=0.000016 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.366985 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 198 components and 0.366985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130565Jy sigma=0.000780 ! Fit after self-cal, rms=0.130554Jy sigma=0.000780 wmodel J1057-2509_S_2014_08_05_pus_map.mod ! Writing 198 model components to file: J1057-2509_S_2014_08_05_pus_map.mod wobs J1057-2509_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1057-2509_S_2014_08_05_pus_uvs.fits wwins J1057-2509_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1057-2509_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012397 Jy ! Component: 100 - total flux cleaned = 0.00179045 Jy ! Component: 150 - total flux cleaned = 0.00235818 Jy ! Component: 200 - total flux cleaned = 0.00274746 Jy ! Component: 250 - total flux cleaned = 0.00293369 Jy ! Component: 300 - total flux cleaned = 0.00315359 Jy ! Component: 350 - total flux cleaned = 0.00323787 Jy ! Component: 400 - total flux cleaned = 0.00331965 Jy ! Component: 450 - total flux cleaned = 0.00335901 Jy ! Component: 500 - total flux cleaned = 0.00351298 Jy ! Component: 550 - total flux cleaned = 0.00366258 Jy ! Component: 600 - total flux cleaned = 0.00384615 Jy ! Component: 650 - total flux cleaned = 0.00399036 Jy ! Component: 700 - total flux cleaned = 0.00420161 Jy ! Component: 750 - total flux cleaned = 0.00444173 Jy ! Component: 800 - total flux cleaned = 0.00457551 Jy ! Component: 850 - total flux cleaned = 0.00467395 Jy ! Component: 900 - total flux cleaned = 0.00483519 Jy ! Component: 950 - total flux cleaned = 0.0049303 Jy ! Component: 1000 - total flux cleaned = 0.00496187 Jy ! Component: 1050 - total flux cleaned = 0.00520693 Jy ! Component: 1100 - total flux cleaned = 0.00535681 Jy ! Component: 1150 - total flux cleaned = 0.00538664 Jy ! Component: 1200 - total flux cleaned = 0.0055036 Jy ! Component: 1250 - total flux cleaned = 0.005504 Jy ! Component: 1300 - total flux cleaned = 0.0055892 Jy ! Component: 1350 - total flux cleaned = 0.00558912 Jy ! Component: 1400 - total flux cleaned = 0.00561686 Jy ! Component: 1450 - total flux cleaned = 0.00569822 Jy ! Component: 1500 - total flux cleaned = 0.00564435 Jy ! Component: 1550 - total flux cleaned = 0.00556421 Jy ! Component: 1600 - total flux cleaned = 0.00564293 Jy ! Component: 1650 - total flux cleaned = 0.00561716 Jy ! Component: 1700 - total flux cleaned = 0.00566873 Jy ! Component: 1750 - total flux cleaned = 0.00561827 Jy ! Component: 1800 - total flux cleaned = 0.0056437 Jy ! Component: 1850 - total flux cleaned = 0.00566783 Jy ! Component: 1900 - total flux cleaned = 0.00569273 Jy ! Component: 1950 - total flux cleaned = 0.00571691 Jy ! Component: 2000 - total flux cleaned = 0.00559686 Jy ! Component: 2050 - total flux cleaned = 0.0056686 Jy ! Component: 2100 - total flux cleaned = 0.00562158 Jy ! Component: 2150 - total flux cleaned = 0.00562195 Jy ! Component: 2200 - total flux cleaned = 0.00566804 Jy ! Component: 2250 - total flux cleaned = 0.00571377 Jy ! Component: 2300 - total flux cleaned = 0.00566853 Jy ! Component: 2350 - total flux cleaned = 0.00566887 Jy ! Component: 2400 - total flux cleaned = 0.00569139 Jy ! Component: 2450 - total flux cleaned = 0.0057574 Jy ! Component: 2500 - total flux cleaned = 0.00577882 Jy ! Component: 2550 - total flux cleaned = 0.005779 Jy ! Component: 2600 - total flux cleaned = 0.00584322 Jy ! Component: 2650 - total flux cleaned = 0.00580076 Jy ! Component: 2700 - total flux cleaned = 0.00586436 Jy ! Component: 2750 - total flux cleaned = 0.00584345 Jy ! Component: 2800 - total flux cleaned = 0.00586426 Jy ! Component: 2850 - total flux cleaned = 0.00582304 Jy ! Component: 2900 - total flux cleaned = 0.00584353 Jy ! Component: 2950 - total flux cleaned = 0.00584356 Jy ! Component: 3000 - total flux cleaned = 0.00582341 Jy ! Component: 3050 - total flux cleaned = 0.0058837 Jy ! Component: 3100 - total flux cleaned = 0.00600261 Jy ! Component: 3150 - total flux cleaned = 0.00594326 Jy ! Component: 3200 - total flux cleaned = 0.00590399 Jy ! Component: 3250 - total flux cleaned = 0.00596234 Jy ! Component: 3300 - total flux cleaned = 0.00586591 Jy ! Component: 3350 - total flux cleaned = 0.00598072 Jy ! Component: 3400 - total flux cleaned = 0.00594253 Jy ! Component: 3450 - total flux cleaned = 0.00590476 Jy ! Component: 3500 - total flux cleaned = 0.00596119 Jy ! Component: 3550 - total flux cleaned = 0.00594246 Jy ! Component: 3600 - total flux cleaned = 0.00601637 Jy ! Component: 3650 - total flux cleaned = 0.00601619 Jy ! Component: 3700 - total flux cleaned = 0.00597964 Jy ! Component: 3750 - total flux cleaned = 0.00594333 Jy ! Component: 3800 - total flux cleaned = 0.00597936 Jy ! Component: 3850 - total flux cleaned = 0.00596144 Jy ! Component: 3900 - total flux cleaned = 0.00590803 Jy ! Component: 3950 - total flux cleaned = 0.00585507 Jy ! Component: 4000 - total flux cleaned = 0.00590794 Jy ! Component: 4050 - total flux cleaned = 0.00592537 Jy ! Total flux subtracted in 4096 components = 0.005908 Jy ! Clean residual min=-0.001080 max=0.001041 Jy/beam ! Clean residual mean=0.000004 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.372893 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 520 components and 0.372893 Jy ![Exited script file: muppet] wmap "J1057-2509_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.034 x 12.85 at 16.89 degrees (North through East) ! Clean map min=-0.0021741 max=0.31598 Jy/beam ! Writing clean map to FITS file: J1057-2509_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.31598 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344598 device "J1057-2509_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1057-2509_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.327171 0.327171 0.654342 1.30868 2.61737 5.23474 10.4695 20.9389 41.8779 83.7558 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.315 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.034 x 12.85 at 16.89 degrees (North through East) ! Clean map min=-0.0021741 max=0.31598 Jy/beam quit ! Quitting program ! Log file J1057-2509_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:24:42 2016