! Started logfile: J1054+3928_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:50:21 2017 obs J1054+3928_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1054+3928_S_2015_01_22_pus_uva.fits ! AN table 1: 49 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1054+3928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 5488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1054+3928_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927550Jy sigma=0.011262 ! Fit after self-cal, rms=0.897237Jy sigma=0.010929 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=10.68 mas, bpa=-57.49 degrees ! Estimated noise=1323.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0803554 Jy ! Component: 100 - total flux cleaned = 0.104439 Jy ! Total flux subtracted in 100 components = 0.104439 Jy ! Clean residual min=-0.011996 max=0.017486 Jy/beam ! Clean residual mean=-0.000042 rms=0.003263 Jy/beam ! Combined flux in latest and established models = 0.104439 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.104439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079970Jy sigma=0.000909 ! Fit after self-cal, rms=0.079820Jy sigma=0.000907 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=10.43 mas, bpa=-58.22 degrees ! Estimated noise=793.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814429 Jy ! Component: 100 - total flux cleaned = 0.00731664 Jy ! Component: 150 - total flux cleaned = 0.00713575 Jy ! Component: 200 - total flux cleaned = 0.00698437 Jy ! Total flux subtracted in 200 components = 0.00698437 Jy ! Clean residual min=-0.008228 max=0.015727 Jy/beam ! Clean residual mean=-0.000110 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.111424 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.111424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078809Jy sigma=0.000886 ! Fit after self-cal, rms=0.078807Jy sigma=0.000886 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.87 KP 0.94 ! LA 2.16 MK 1.03 NL 0.92 OV 0.90 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.96 KP 0.92 ! LA 2.26 MK 1.04 NL 1.14 OV 0.89 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 0.94 KP 0.78 ! LA 1.92 MK 1.02 NL 1.33 OV 0.85 ! PT 0.88 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.90 KP 0.73 ! LA 2.10 MK 1.08 NL 0.87 OV 0.86 ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.078807Jy sigma=0.000886 ! Fit after self-cal, rms=0.098644Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=10.19 mas, bpa=-58.97 degrees ! Estimated noise=781.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180019 Jy ! Component: 100 - total flux cleaned = 0.00201285 Jy ! Component: 150 - total flux cleaned = 0.0021527 Jy ! Component: 200 - total flux cleaned = 0.00218359 Jy ! Total flux subtracted in 200 components = 0.00218359 Jy ! Clean residual min=-0.002571 max=0.002714 Jy/beam ! Clean residual mean=0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.113607 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.113607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098626Jy sigma=0.000806 ! Fit after self-cal, rms=0.099403Jy sigma=0.000804 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099403Jy sigma=0.000804 ! Fit after self-cal, rms=0.101613Jy sigma=0.000804 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=10.17 mas, bpa=-59.04 degrees ! Estimated noise=781.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000944399 Jy ! Component: 100 - total flux cleaned = 0.00111627 Jy ! Component: 150 - total flux cleaned = 0.00119816 Jy ! Component: 200 - total flux cleaned = 0.00123512 Jy ! Total flux subtracted in 200 components = 0.00123512 Jy ! Clean residual min=-0.002433 max=0.002450 Jy/beam ! Clean residual mean=0.000003 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.114842 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.114842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101612Jy sigma=0.000803 ! Fit after self-cal, rms=0.101642Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20492e-05 Jy ! Component: 100 - total flux cleaned = 7.81383e-05 Jy ! Component: 150 - total flux cleaned = 9.11075e-05 Jy ! Component: 200 - total flux cleaned = 7.84816e-05 Jy ! Total flux subtracted in 200 components = 7.84816e-05 Jy ! Clean residual min=-0.002403 max=0.002411 Jy/beam ! Clean residual mean=0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.114921 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.114921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101640Jy sigma=0.000803 ! Fit after self-cal, rms=0.101643Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101643Jy sigma=0.000803 ! Fit after self-cal, rms=0.101862Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=10.17 mas, bpa=-59.04 degrees ! Estimated noise=781.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408789 Jy ! Component: 100 - total flux cleaned = 0.000462831 Jy ! Component: 150 - total flux cleaned = 0.000463514 Jy ! Component: 200 - total flux cleaned = 0.000463899 Jy ! Total flux subtracted in 200 components = 0.000463899 Jy ! Clean residual min=-0.002388 max=0.002377 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.115385 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.115385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101861Jy sigma=0.000803 ! Fit after self-cal, rms=0.101864Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.05337e-06 Jy ! Component: 100 - total flux cleaned = -5.97355e-06 Jy ! Component: 150 - total flux cleaned = -1.54384e-05 Jy ! Component: 200 - total flux cleaned = -4.20921e-05 Jy ! Total flux subtracted in 200 components = -4.20921e-05 Jy ! Clean residual min=-0.002383 max=0.002375 Jy/beam ! Clean residual mean=0.000003 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.115343 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.115343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101863Jy sigma=0.000803 ! Fit after self-cal, rms=0.101864Jy sigma=0.000803 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101864Jy sigma=0.000803 ! Fit after self-cal, rms=0.101946Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.38 mas, bmaj=11.47 mas, bpa=-79.2 degrees ! Estimated noise=975.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335004 Jy ! Component: 100 - total flux cleaned = 0.000412013 Jy ! Component: 150 - total flux cleaned = 0.00042925 Jy ! Component: 200 - total flux cleaned = 0.000414357 Jy ! Total flux subtracted in 200 components = 0.000414357 Jy ! Clean residual min=-0.002805 max=0.002296 Jy/beam ! Clean residual mean=0.000005 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.115757 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.115757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101944Jy sigma=0.000803 ! Fit after self-cal, rms=0.101944Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12163e-05 Jy ! Component: 100 - total flux cleaned = 1.29584e-05 Jy ! Component: 150 - total flux cleaned = -1.34035e-07 Jy ! Component: 200 - total flux cleaned = -6.28568e-06 Jy ! Total flux subtracted in 200 components = -6.28568e-06 Jy ! Clean residual min=-0.002799 max=0.002309 Jy/beam ! Clean residual mean=0.000005 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.115751 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.115751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101943Jy sigma=0.000803 ! Fit after self-cal, rms=0.101944Jy sigma=0.000803 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.17 mas, bpa=-59.04 degrees ! Estimated noise=781.058 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.17 at -59.04 degrees (North through East) ! Clean map min=-0.0022754 max=0.10787 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=10.29 mas, bpa=-58.45 degrees ! Estimated noise=1271.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766355 Jy ! Component: 100 - total flux cleaned = 0.0977891 Jy ! Component: 150 - total flux cleaned = 0.107855 Jy ! Component: 200 - total flux cleaned = 0.112192 Jy ! Total flux subtracted in 200 components = 0.112192 Jy ! Clean residual min=-0.005529 max=0.005826 Jy/beam ! Clean residual mean=0.000001 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.112192 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.112192 Jy ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.17 mas, bpa=-59.04 degrees ! Estimated noise=781.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272774 Jy ! Component: 100 - total flux cleaned = 0.00287204 Jy ! Component: 150 - total flux cleaned = 0.00305428 Jy ! Component: 200 - total flux cleaned = 0.003156 Jy ! Total flux subtracted in 200 components = 0.003156 Jy ! Clean residual min=-0.002665 max=0.002483 Jy/beam ! Clean residual mean=0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.115348 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.115348 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.38 mas, bmaj=11.47 mas, bpa=-79.2 degrees ! Estimated noise=975.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413448 Jy ! Component: 100 - total flux cleaned = 0.000586249 Jy ! Component: 150 - total flux cleaned = 0.000587253 Jy ! Component: 200 - total flux cleaned = 0.000548633 Jy ! Total flux subtracted in 200 components = 0.000548633 Jy ! Clean residual min=-0.003077 max=0.002367 Jy/beam ! Clean residual mean=0.000006 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.115897 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29309e-05 Jy ! Component: 100 - total flux cleaned = -3.33793e-05 Jy ! Component: 150 - total flux cleaned = -4.7526e-05 Jy ! Component: 200 - total flux cleaned = -3.44662e-05 Jy ! Total flux subtracted in 200 components = -3.44662e-05 Jy ! Clean residual min=-0.003064 max=0.002341 Jy/beam ! Clean residual mean=0.000006 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.115862 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 0.115862 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.17 mas, bpa=-59.04 degrees ! Estimated noise=781.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165662 Jy ! Component: 100 - total flux cleaned = 0.000168023 Jy ! Component: 150 - total flux cleaned = 0.000117969 Jy ! Component: 200 - total flux cleaned = 5.39786e-05 Jy ! Total flux subtracted in 200 components = 5.39786e-05 Jy ! Clean residual min=-0.002453 max=0.002265 Jy/beam ! Clean residual mean=0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.115916 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.115916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101949Jy sigma=0.000803 ! Fit after self-cal, rms=0.101944Jy sigma=0.000803 wmodel J1054+3928_S_2015_01_22_pus_map.mod ! Writing 64 model components to file: J1054+3928_S_2015_01_22_pus_map.mod wobs J1054+3928_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1054+3928_S_2015_01_22_pus_uvs.fits wwins J1054+3928_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1054+3928_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876124 Jy ! Component: 100 - total flux cleaned = -0.00107172 Jy ! Component: 150 - total flux cleaned = -0.00114626 Jy ! Component: 200 - total flux cleaned = -0.00139409 Jy ! Component: 250 - total flux cleaned = -0.00159632 Jy ! Component: 300 - total flux cleaned = -0.00166219 Jy ! Component: 350 - total flux cleaned = -0.00172593 Jy ! Component: 400 - total flux cleaned = -0.00172665 Jy ! Component: 450 - total flux cleaned = -0.00178762 Jy ! Component: 500 - total flux cleaned = -0.00178748 Jy ! Component: 550 - total flux cleaned = -0.0017872 Jy ! Component: 600 - total flux cleaned = -0.00178695 Jy ! Component: 650 - total flux cleaned = -0.00181423 Jy ! Component: 700 - total flux cleaned = -0.00192213 Jy ! Component: 750 - total flux cleaned = -0.0019226 Jy ! Component: 800 - total flux cleaned = -0.00189652 Jy ! Component: 850 - total flux cleaned = -0.0018706 Jy ! Component: 900 - total flux cleaned = -0.00184505 Jy ! Component: 950 - total flux cleaned = -0.00179487 Jy ! Component: 1000 - total flux cleaned = -0.00177024 Jy ! Component: 1050 - total flux cleaned = -0.00176986 Jy ! Component: 1100 - total flux cleaned = -0.00176958 Jy ! Component: 1150 - total flux cleaned = -0.00172219 Jy ! Component: 1200 - total flux cleaned = -0.00169877 Jy ! Component: 1250 - total flux cleaned = -0.0016988 Jy ! Component: 1300 - total flux cleaned = -0.00167604 Jy ! Component: 1350 - total flux cleaned = -0.0016305 Jy ! Component: 1400 - total flux cleaned = -0.0016533 Jy ! Component: 1450 - total flux cleaned = -0.00156398 Jy ! Component: 1500 - total flux cleaned = -0.00151988 Jy ! Component: 1550 - total flux cleaned = -0.00154169 Jy ! Component: 1600 - total flux cleaned = -0.00145528 Jy ! Component: 1650 - total flux cleaned = -0.00145544 Jy ! Component: 1700 - total flux cleaned = -0.00143423 Jy ! Component: 1750 - total flux cleaned = -0.00135001 Jy ! Component: 1800 - total flux cleaned = -0.001371 Jy ! Component: 1850 - total flux cleaned = -0.00130874 Jy ! Component: 1900 - total flux cleaned = -0.00126769 Jy ! Component: 1950 - total flux cleaned = -0.00120633 Jy ! Component: 2000 - total flux cleaned = -0.00114548 Jy ! Component: 2050 - total flux cleaned = -0.00104484 Jy ! Component: 2100 - total flux cleaned = -0.00106487 Jy ! Component: 2150 - total flux cleaned = -0.00102491 Jy ! Component: 2200 - total flux cleaned = -0.000925911 Jy ! Component: 2250 - total flux cleaned = -0.000886509 Jy ! Component: 2300 - total flux cleaned = -0.00084736 Jy ! Component: 2350 - total flux cleaned = -0.00075033 Jy ! Component: 2400 - total flux cleaned = -0.000731074 Jy ! Component: 2450 - total flux cleaned = -0.000654283 Jy ! Component: 2500 - total flux cleaned = -0.000635231 Jy ! Component: 2550 - total flux cleaned = -0.000539858 Jy ! Component: 2600 - total flux cleaned = -0.000463943 Jy ! Component: 2650 - total flux cleaned = -0.000407341 Jy ! Component: 2700 - total flux cleaned = -0.000313018 Jy ! Component: 2750 - total flux cleaned = -0.000219202 Jy ! Component: 2800 - total flux cleaned = -0.000163187 Jy ! Component: 2850 - total flux cleaned = -0.000125959 Jy ! Component: 2900 - total flux cleaned = -3.31943e-05 Jy ! Component: 2950 - total flux cleaned = 4.08055e-05 Jy ! Component: 3000 - total flux cleaned = 0.000114543 Jy ! Component: 3050 - total flux cleaned = 0.000169721 Jy ! Component: 3100 - total flux cleaned = 0.000261465 Jy ! Component: 3150 - total flux cleaned = 0.000334657 Jy ! Component: 3200 - total flux cleaned = 0.000443907 Jy ! Component: 3250 - total flux cleaned = 0.000498551 Jy ! Component: 3300 - total flux cleaned = 0.00060737 Jy ! Component: 3350 - total flux cleaned = 0.000679599 Jy ! Component: 3400 - total flux cleaned = 0.000751828 Jy ! Component: 3450 - total flux cleaned = 0.00084169 Jy ! Component: 3500 - total flux cleaned = 0.000895429 Jy ! Component: 3550 - total flux cleaned = 0.000984943 Jy ! Component: 3600 - total flux cleaned = 0.00102069 Jy ! Component: 3650 - total flux cleaned = 0.00105648 Jy ! Component: 3700 - total flux cleaned = 0.00110989 Jy ! Component: 3750 - total flux cleaned = 0.0010921 Jy ! Component: 3800 - total flux cleaned = 0.00112759 Jy ! Component: 3850 - total flux cleaned = 0.00116303 Jy ! Component: 3900 - total flux cleaned = 0.00118077 Jy ! Component: 3950 - total flux cleaned = 0.00119828 Jy ! Component: 4000 - total flux cleaned = 0.00125112 Jy ! Component: 4050 - total flux cleaned = 0.00125106 Jy ! Total flux subtracted in 4096 components = 0.00125098 Jy ! Clean residual min=-0.001055 max=0.001171 Jy/beam ! Clean residual mean=-0.000004 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.117167 Jy keep ! Adding 186 model components to the UV plane model. ! The established model now contains 250 components and 0.117167 Jy ![Exited script file: muppet] wmap "J1054+3928_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.17 at -59.04 degrees (North through East) ! Clean map min=-0.0032947 max=0.10697 Jy/beam ! Writing clean map to FITS file: J1054+3928_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106974 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287979 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.807611 0.807611 1.61522 3.23044 6.46089 12.9218 25.8436 51.6871 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.17 at -59.04 degrees (North through East) ! Clean map min=-0.0032947 max=0.10697 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1054+3928_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:50:28 2017