! Started logfile: J1051+2027_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:22:21 2017 obs J1051+2027_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1051+2027_S_2015_01_23_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77154 visibilities/baseline/integration-bin. ! Found source: J1051+2027 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1051+2027_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000717Jy sigma=0.012010 ! Fit after self-cal, rms=0.950601Jy sigma=0.011542 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=5.648 mas, bpa=-6.714 degrees ! Estimated noise=971.592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377727 Jy ! Component: 100 - total flux cleaned = 0.0486667 Jy ! Total flux subtracted in 100 components = 0.0486667 Jy ! Clean residual min=-0.003881 max=0.004848 Jy/beam ! Clean residual mean=0.000002 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0486667 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0486667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159088Jy sigma=0.000792 ! Fit after self-cal, rms=0.158818Jy sigma=0.000786 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=6.415 mas, bpa=-5.277 degrees ! Estimated noise=700.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817956 Jy ! Component: 100 - total flux cleaned = 0.0118749 Jy ! Component: 150 - total flux cleaned = 0.0138204 Jy ! Component: 200 - total flux cleaned = 0.0150049 Jy ! Total flux subtracted in 200 components = 0.0150049 Jy ! Clean residual min=-0.003739 max=0.003374 Jy/beam ! Clean residual mean=0.000007 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0636716 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0636716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157836Jy sigma=0.000780 ! Fit after self-cal, rms=0.157842Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.33 HN 0.99 KP 1.03 ! LA 1.02 MK 1.05 NL 1.08 OV 1.02 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.43 HN 1.00 KP 1.11 ! LA 0.92 MK 0.95 NL 1.13 OV 0.98 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.52 HN 1.09 KP 0.94 ! LA 0.77 MK 1.07 NL 1.53 OV 0.93 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.40 HN 1.02 KP 0.85 ! LA 0.83 MK 1.02 NL 1.01 OV 1.00 ! PT 1.04 SC 0.97 ! ! ! Fit before self-cal, rms=0.157842Jy sigma=0.000780 ! Fit after self-cal, rms=0.083901Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=6.489 mas, bpa=-4.758 degrees ! Estimated noise=700.332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014396 Jy ! Component: 100 - total flux cleaned = -0.000143055 Jy ! Component: 150 - total flux cleaned = -0.000143539 Jy ! Component: 200 - total flux cleaned = -0.000126921 Jy ! Total flux subtracted in 200 components = -0.000126921 Jy ! Clean residual min=-0.002490 max=0.002413 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0635447 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0635447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083868Jy sigma=0.000770 ! Fit after self-cal, rms=0.083458Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083458Jy sigma=0.000769 ! Fit after self-cal, rms=0.080232Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=6.465 mas, bpa=-4.48 degrees ! Estimated noise=695.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206801 Jy ! Component: 100 - total flux cleaned = -0.000316425 Jy ! Component: 150 - total flux cleaned = -0.000402101 Jy ! Component: 200 - total flux cleaned = -0.000474617 Jy ! Total flux subtracted in 200 components = -0.000474617 Jy ! Clean residual min=-0.002304 max=0.001979 Jy/beam ! Clean residual mean=-0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0630701 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.0630701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080217Jy sigma=0.000766 ! Fit after self-cal, rms=0.080189Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128754 Jy ! Component: 100 - total flux cleaned = -0.00018354 Jy ! Component: 150 - total flux cleaned = -0.000217966 Jy ! Component: 200 - total flux cleaned = -0.000238358 Jy ! Total flux subtracted in 200 components = -0.000238358 Jy ! Clean residual min=-0.002266 max=0.002021 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0628317 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0628317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080182Jy sigma=0.000766 ! Fit after self-cal, rms=0.080180Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080180Jy sigma=0.000766 ! Fit after self-cal, rms=0.079752Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=6.456 mas, bpa=-4.347 degrees ! Estimated noise=694.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013517 Jy ! Component: 100 - total flux cleaned = -0.000199762 Jy ! Component: 150 - total flux cleaned = -0.000232357 Jy ! Component: 200 - total flux cleaned = -0.000260251 Jy ! Total flux subtracted in 200 components = -0.000260251 Jy ! Clean residual min=-0.002264 max=0.002008 Jy/beam ! Clean residual mean=-0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0625715 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0625715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079746Jy sigma=0.000766 ! Fit after self-cal, rms=0.079745Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.11227e-05 Jy ! Component: 100 - total flux cleaned = -0.000104446 Jy ! Component: 150 - total flux cleaned = -0.000123507 Jy ! Component: 200 - total flux cleaned = -0.000140589 Jy ! Total flux subtracted in 200 components = -0.000140589 Jy ! Clean residual min=-0.002246 max=0.002018 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0624309 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0624309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079741Jy sigma=0.000766 ! Fit after self-cal, rms=0.079741Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079741Jy sigma=0.000766 ! Fit after self-cal, rms=0.079734Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.561 mas, bmaj=10.23 mas, bpa=-1.762 degrees ! Estimated noise=868.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178534 Jy ! Component: 100 - total flux cleaned = -0.00025108 Jy ! Component: 150 - total flux cleaned = -0.000296557 Jy ! Component: 200 - total flux cleaned = -0.000346203 Jy ! Total flux subtracted in 200 components = -0.000346203 Jy ! Clean residual min=-0.002621 max=0.001914 Jy/beam ! Clean residual mean=-0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0620847 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.0620847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079730Jy sigma=0.000766 ! Fit after self-cal, rms=0.079720Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56584e-06 Jy ! Component: 100 - total flux cleaned = -4.25975e-05 Jy ! Component: 150 - total flux cleaned = -7.54712e-05 Jy ! Component: 200 - total flux cleaned = -0.00010425 Jy ! Total flux subtracted in 200 components = -0.00010425 Jy ! Clean residual min=-0.002622 max=0.001933 Jy/beam ! Clean residual mean=-0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0619804 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.0619804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079719Jy sigma=0.000766 ! Fit after self-cal, rms=0.079717Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=6.447 mas, bpa=-4.22 degrees ! Estimated noise=693.943 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 6.447 at -4.22 degrees (North through East) ! Clean map min=-0.0021376 max=0.052409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=5.65 mas, bpa=-5.819 degrees ! Estimated noise=970.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379742 Jy ! Component: 100 - total flux cleaned = 0.0504731 Jy ! Component: 150 - total flux cleaned = 0.0565949 Jy ! Component: 200 - total flux cleaned = 0.0579045 Jy ! Total flux subtracted in 200 components = 0.0579045 Jy ! Clean residual min=-0.003116 max=0.003369 Jy/beam ! Clean residual mean=-0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0579045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0579045 Jy ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=6.447 mas, bpa=-4.22 degrees ! Estimated noise=693.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279192 Jy ! Component: 100 - total flux cleaned = 0.00353933 Jy ! Component: 150 - total flux cleaned = 0.00387177 Jy ! Component: 200 - total flux cleaned = 0.00408724 Jy ! Total flux subtracted in 200 components = 0.00408724 Jy ! Clean residual min=-0.002119 max=0.002045 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0619918 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0619918 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.561 mas, bmaj=10.23 mas, bpa=-1.762 degrees ! Estimated noise=868.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253287 Jy ! Component: 100 - total flux cleaned = 0.000165459 Jy ! Component: 150 - total flux cleaned = 9.30146e-05 Jy ! Component: 200 - total flux cleaned = 6.23615e-05 Jy ! Total flux subtracted in 200 components = 6.23615e-05 Jy ! Clean residual min=-0.002578 max=0.001941 Jy/beam ! Clean residual mean=-0.000005 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0620541 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76743e-05 Jy ! Component: 100 - total flux cleaned = -5.17231e-05 Jy ! Component: 150 - total flux cleaned = -8.46883e-05 Jy ! Component: 200 - total flux cleaned = -0.000104647 Jy ! Total flux subtracted in 200 components = -0.000104647 Jy ! Clean residual min=-0.002581 max=0.001923 Jy/beam ! Clean residual mean=-0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0619495 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0619495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=6.447 mas, bpa=-4.22 degrees ! Estimated noise=693.943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206363 Jy ! Component: 100 - total flux cleaned = -0.0001867 Jy ! Component: 150 - total flux cleaned = -0.000115362 Jy ! Component: 200 - total flux cleaned = -6.92161e-05 Jy ! Total flux subtracted in 200 components = -6.92161e-05 Jy ! Clean residual min=-0.002168 max=0.002034 Jy/beam ! Clean residual mean=-0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0618803 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0618803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079720Jy sigma=0.000766 ! Fit after self-cal, rms=0.079720Jy sigma=0.000766 wmodel J1051+2027_S_2015_01_23_pus_map.mod ! Writing 41 model components to file: J1051+2027_S_2015_01_23_pus_map.mod wobs J1051+2027_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1051+2027_S_2015_01_23_pus_uvs.fits wwins J1051+2027_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1051+2027_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177616 Jy ! Component: 100 - total flux cleaned = 9.10392e-05 Jy ! Component: 150 - total flux cleaned = 0.000380193 Jy ! Component: 200 - total flux cleaned = 0.00069005 Jy ! Component: 250 - total flux cleaned = 0.000929852 Jy ! Component: 300 - total flux cleaned = 0.00116368 Jy ! Component: 350 - total flux cleaned = 0.00141981 Jy ! Component: 400 - total flux cleaned = 0.00161469 Jy ! Component: 450 - total flux cleaned = 0.00183253 Jy ! Component: 500 - total flux cleaned = 0.00209765 Jy ! Component: 550 - total flux cleaned = 0.0022527 Jy ! Component: 600 - total flux cleaned = 0.00240513 Jy ! Component: 650 - total flux cleaned = 0.00245585 Jy ! Component: 700 - total flux cleaned = 0.00255415 Jy ! Component: 750 - total flux cleaned = 0.00255377 Jy ! Component: 800 - total flux cleaned = 0.00250692 Jy ! Component: 850 - total flux cleaned = 0.00255432 Jy ! Component: 900 - total flux cleaned = 0.00260085 Jy ! Component: 950 - total flux cleaned = 0.00264693 Jy ! Component: 1000 - total flux cleaned = 0.00273637 Jy ! Component: 1050 - total flux cleaned = 0.00271462 Jy ! Component: 1100 - total flux cleaned = 0.00269325 Jy ! Component: 1150 - total flux cleaned = 0.00265092 Jy ! Component: 1200 - total flux cleaned = 0.00265135 Jy ! Component: 1250 - total flux cleaned = 0.0026928 Jy ! Component: 1300 - total flux cleaned = 0.0026721 Jy ! Component: 1350 - total flux cleaned = 0.00259131 Jy ! Component: 1400 - total flux cleaned = 0.00259136 Jy ! Component: 1450 - total flux cleaned = 0.00259122 Jy ! Component: 1500 - total flux cleaned = 0.00263005 Jy ! Component: 1550 - total flux cleaned = 0.0025719 Jy ! Component: 1600 - total flux cleaned = 0.00255258 Jy ! Component: 1650 - total flux cleaned = 0.00251497 Jy ! Component: 1700 - total flux cleaned = 0.00249635 Jy ! Component: 1750 - total flux cleaned = 0.00257016 Jy ! Component: 1800 - total flux cleaned = 0.00255164 Jy ! Component: 1850 - total flux cleaned = 0.00253362 Jy ! Component: 1900 - total flux cleaned = 0.00255139 Jy ! Component: 1950 - total flux cleaned = 0.00256891 Jy ! Component: 2000 - total flux cleaned = 0.0025339 Jy ! Component: 2050 - total flux cleaned = 0.00256834 Jy ! Component: 2100 - total flux cleaned = 0.00261967 Jy ! Component: 2150 - total flux cleaned = 0.00265322 Jy ! Component: 2200 - total flux cleaned = 0.00268658 Jy ! Component: 2250 - total flux cleaned = 0.00263676 Jy ! Component: 2300 - total flux cleaned = 0.00265333 Jy ! Component: 2350 - total flux cleaned = 0.00266961 Jy ! Component: 2400 - total flux cleaned = 0.00266958 Jy ! Component: 2450 - total flux cleaned = 0.00268539 Jy ! Component: 2500 - total flux cleaned = 0.00265373 Jy ! Component: 2550 - total flux cleaned = 0.00270033 Jy ! Component: 2600 - total flux cleaned = 0.00268479 Jy ! Component: 2650 - total flux cleaned = 0.00263892 Jy ! Component: 2700 - total flux cleaned = 0.00262388 Jy ! Component: 2750 - total flux cleaned = 0.00260904 Jy ! Component: 2800 - total flux cleaned = 0.00254934 Jy ! Component: 2850 - total flux cleaned = 0.00251984 Jy ! Component: 2900 - total flux cleaned = 0.00247601 Jy ! Component: 2950 - total flux cleaned = 0.00243259 Jy ! Component: 3000 - total flux cleaned = 0.00243262 Jy ! Component: 3050 - total flux cleaned = 0.0024324 Jy ! Component: 3100 - total flux cleaned = 0.0023901 Jy ! Component: 3150 - total flux cleaned = 0.00246026 Jy ! Component: 3200 - total flux cleaned = 0.00243235 Jy ! Component: 3250 - total flux cleaned = 0.00237694 Jy ! Component: 3300 - total flux cleaned = 0.0023496 Jy ! Component: 3350 - total flux cleaned = 0.00233589 Jy ! Component: 3400 - total flux cleaned = 0.00234937 Jy ! Component: 3450 - total flux cleaned = 0.0022959 Jy ! Component: 3500 - total flux cleaned = 0.00226923 Jy ! Component: 3550 - total flux cleaned = 0.00225605 Jy ! Component: 3600 - total flux cleaned = 0.0022429 Jy ! Component: 3650 - total flux cleaned = 0.0022168 Jy ! Component: 3700 - total flux cleaned = 0.00219113 Jy ! Component: 3750 - total flux cleaned = 0.00217839 Jy ! Component: 3800 - total flux cleaned = 0.00216563 Jy ! Component: 3850 - total flux cleaned = 0.00216548 Jy ! Component: 3900 - total flux cleaned = 0.00211519 Jy ! Component: 3950 - total flux cleaned = 0.00211528 Jy ! Component: 4000 - total flux cleaned = 0.00210281 Jy ! Component: 4050 - total flux cleaned = 0.00206589 Jy ! Total flux subtracted in 4096 components = 0.00204142 Jy ! Clean residual min=-0.000670 max=0.000793 Jy/beam ! Clean residual mean=-0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0639217 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 332 components and 0.0639216 Jy ![Exited script file: muppet] wmap "J1051+2027_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 6.447 at -4.22 degrees (North through East) ! Clean map min=-0.0016626 max=0.052396 Jy/beam ! Writing clean map to FITS file: J1051+2027_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0523959 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228667 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30927 1.30927 2.61853 5.23706 10.4741 20.9482 41.8965 83.793 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 6.447 at -4.22 degrees (North through East) ! Clean map min=-0.0016626 max=0.052396 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1051+2027_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:22:26 2017