! Started logfile: J1048-1909_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:22:15 2017 obs J1048-1909_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1048-1909_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78254 visibilities/baseline/integration-bin. ! Found source: J1048-1909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1048-1909_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.482288Jy sigma=0.002839 ! Fit after self-cal, rms=0.447940Jy sigma=0.002320 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.548 mas, bpa=0.5279 degrees ! Estimated noise=2339.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.901377 Jy ! Component: 100 - total flux cleaned = 1.10936 Jy ! Total flux subtracted in 100 components = 1.10936 Jy ! Clean residual min=-0.059454 max=0.078305 Jy/beam ! Clean residual mean=-0.000207 rms=0.014027 Jy/beam ! Combined flux in latest and established models = 1.10936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.10936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397725Jy sigma=0.001907 ! Fit after self-cal, rms=0.397699Jy sigma=0.001906 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=7.267 mas, bpa=0.3693 degrees ! Estimated noise=1838.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874183 Jy ! Component: 100 - total flux cleaned = 0.134523 Jy ! Component: 150 - total flux cleaned = 0.162467 Jy ! Component: 200 - total flux cleaned = 0.179742 Jy ! Total flux subtracted in 200 components = 0.179742 Jy ! Clean residual min=-0.061804 max=0.054561 Jy/beam ! Clean residual mean=-0.000034 rms=0.012852 Jy/beam ! Combined flux in latest and established models = 1.2891 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 1.2891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351972Jy sigma=0.001696 ! Fit after self-cal, rms=0.351940Jy sigma=0.001695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.60 HN 1.05 KP 1.10 ! LA 0.99 MK 0.99 NL 1.12 OV 0.98 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.67 HN 1.11 KP 1.02 ! LA 0.94 MK 0.99 NL 1.35 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.81 HN 1.09 KP 0.88 ! LA 0.77 MK 1.02 NL 1.19 OV 0.95 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.66 HN 1.03 KP 0.81 ! LA 0.80 MK 0.99 NL 1.02 OV 0.99 ! PT 1.03 SC 0.95 ! ! ! Fit before self-cal, rms=0.351940Jy sigma=0.001695 ! Fit after self-cal, rms=0.131995Jy sigma=0.000830 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.308 mas, bpa=0.59 degrees ! Estimated noise=1837.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201385 Jy ! Component: 100 - total flux cleaned = 0.0264923 Jy ! Component: 150 - total flux cleaned = 0.0280696 Jy ! Component: 200 - total flux cleaned = 0.0287093 Jy ! Total flux subtracted in 200 components = 0.0287093 Jy ! Clean residual min=-0.009507 max=0.007880 Jy/beam ! Clean residual mean=0.000007 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 1.31781 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 1.31781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128478Jy sigma=0.000793 ! Fit after self-cal, rms=0.128176Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128176Jy sigma=0.000791 ! Fit after self-cal, rms=0.127616Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.304 mas, bpa=0.5622 degrees ! Estimated noise=1832.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539104 Jy ! Component: 100 - total flux cleaned = 0.00540991 Jy ! Component: 150 - total flux cleaned = 0.00497155 Jy ! Component: 200 - total flux cleaned = 0.00459459 Jy ! Total flux subtracted in 200 components = 0.00459459 Jy ! Clean residual min=-0.008399 max=0.006486 Jy/beam ! Clean residual mean=0.000009 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 1.3224 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 82 components and 1.3224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127030Jy sigma=0.000784 ! Fit after self-cal, rms=0.126937Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596219 Jy ! Component: 100 - total flux cleaned = 0.000261972 Jy ! Component: 150 - total flux cleaned = -5.21591e-05 Jy ! Component: 200 - total flux cleaned = -0.000343389 Jy ! Total flux subtracted in 200 components = -0.000343389 Jy ! Clean residual min=-0.007994 max=0.006278 Jy/beam ! Clean residual mean=0.000009 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 1.32206 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 1.32206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126704Jy sigma=0.000782 ! Fit after self-cal, rms=0.126675Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126675Jy sigma=0.000782 ! Fit after self-cal, rms=0.126431Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.305 mas, bpa=0.5418 degrees ! Estimated noise=1829.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100618 Jy ! Component: 100 - total flux cleaned = 0.00110098 Jy ! Component: 150 - total flux cleaned = 0.000828332 Jy ! Component: 200 - total flux cleaned = 0.000742937 Jy ! Total flux subtracted in 200 components = 0.000742937 Jy ! Clean residual min=-0.007519 max=0.006060 Jy/beam ! Clean residual mean=0.000009 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 1.3228 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 1.3228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126232Jy sigma=0.000780 ! Fit after self-cal, rms=0.126202Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295779 Jy ! Component: 100 - total flux cleaned = 0.000380049 Jy ! Component: 150 - total flux cleaned = 0.00022789 Jy ! Component: 200 - total flux cleaned = 0.000157613 Jy ! Total flux subtracted in 200 components = 0.000157613 Jy ! Clean residual min=-0.007403 max=0.005960 Jy/beam ! Clean residual mean=0.000009 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 1.32296 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 1.32296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126078Jy sigma=0.000779 ! Fit after self-cal, rms=0.126069Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126069Jy sigma=0.000778 ! Fit after self-cal, rms=0.125977Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.952 mas, bmaj=15.71 mas, bpa=6.968 degrees ! Estimated noise=2520.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140055 Jy ! Component: 100 - total flux cleaned = -0.00102602 Jy ! Component: 150 - total flux cleaned = -0.00109551 Jy ! Component: 200 - total flux cleaned = -0.00135625 Jy ! Total flux subtracted in 200 components = -0.00135625 Jy ! Clean residual min=-0.008455 max=0.007206 Jy/beam ! Clean residual mean=0.000018 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 1.32161 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 114 components and 1.32161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125900Jy sigma=0.000778 ! Fit after self-cal, rms=0.125886Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.15103e-05 Jy ! Component: 100 - total flux cleaned = -0.000111608 Jy ! Component: 150 - total flux cleaned = -0.000291319 Jy ! Component: 200 - total flux cleaned = -0.000459715 Jy ! Total flux subtracted in 200 components = -0.000459715 Jy ! Clean residual min=-0.008114 max=0.007182 Jy/beam ! Clean residual mean=0.000017 rms=0.002134 Jy/beam ! Combined flux in latest and established models = 1.32115 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 1.32115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125822Jy sigma=0.000778 ! Fit after self-cal, rms=0.125821Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.306 mas, bpa=0.5248 degrees ! Estimated noise=1828.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.745 x 7.306 at 0.5248 degrees (North through East) ! Clean map min=-0.0065968 max=1.1236 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125821Jy sigma=0.000777 ! Fit after self-cal, rms=0.112814Jy sigma=0.000705 ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.311 mas, bpa=0.4861 degrees ! Estimated noise=1827.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500157 Jy ! Component: 100 - total flux cleaned = 0.000122532 Jy ! Component: 150 - total flux cleaned = -0.000143004 Jy ! Component: 200 - total flux cleaned = -0.000439245 Jy ! Total flux subtracted in 200 components = -0.000439245 Jy ! Clean residual min=-0.006539 max=0.005650 Jy/beam ! Clean residual mean=0.000004 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 1.32071 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 1.32071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112697Jy sigma=0.000704 ! Fit after self-cal, rms=0.112685Jy sigma=0.000704 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022798 Jy ! Component: 100 - total flux cleaned = -8.50676e-05 Jy ! Component: 150 - total flux cleaned = -0.000370061 Jy ! Component: 200 - total flux cleaned = -0.000545925 Jy ! Total flux subtracted in 200 components = -0.000545925 Jy ! Clean residual min=-0.006541 max=0.005617 Jy/beam ! Clean residual mean=0.000004 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 1.32016 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 1.32016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112627Jy sigma=0.000704 ! Fit after self-cal, rms=0.112622Jy sigma=0.000704 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112622Jy sigma=0.000704 ! Fit after self-cal, rms=0.112573Jy sigma=0.000704 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=6.582 mas, bpa=0.6611 degrees ! Estimated noise=2282.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.879205 Jy ! Component: 100 - total flux cleaned = 1.08131 Jy ! Component: 150 - total flux cleaned = 1.15952 Jy ! Component: 200 - total flux cleaned = 1.2043 Jy ! Total flux subtracted in 200 components = 1.2043 Jy ! Clean residual min=-0.013842 max=0.023528 Jy/beam ! Clean residual mean=-0.000080 rms=0.004355 Jy/beam ! Combined flux in latest and established models = 1.2043 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.2043 Jy ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.313 mas, bpa=0.4803 degrees ! Estimated noise=1827.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359096 Jy ! Component: 100 - total flux cleaned = 0.0584066 Jy ! Component: 150 - total flux cleaned = 0.0734407 Jy ! Component: 200 - total flux cleaned = 0.0839009 Jy ! Total flux subtracted in 200 components = 0.0839009 Jy ! Clean residual min=-0.007412 max=0.007938 Jy/beam ! Clean residual mean=-0.000017 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 1.2882 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 67 components and 1.2882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.951 mas, bmaj=15.72 mas, bpa=6.947 degrees ! Estimated noise=2516.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012564 Jy ! Component: 100 - total flux cleaned = 0.0194469 Jy ! Component: 150 - total flux cleaned = 0.023537 Jy ! Component: 200 - total flux cleaned = 0.0259752 Jy ! Total flux subtracted in 200 components = 0.0259752 Jy ! Clean residual min=-0.006820 max=0.007106 Jy/beam ! Clean residual mean=0.000004 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.31417 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050734 Jy ! Component: 100 - total flux cleaned = 0.000818679 Jy ! Component: 150 - total flux cleaned = 0.0011392 Jy ! Component: 200 - total flux cleaned = 0.00118731 Jy ! Total flux subtracted in 200 components = 0.00118731 Jy ! Clean residual min=-0.006610 max=0.006711 Jy/beam ! Clean residual mean=0.000004 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 1.31536 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 101 components and 1.31536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.313 mas, bpa=0.4803 degrees ! Estimated noise=1827.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183378 Jy ! Component: 100 - total flux cleaned = 0.000133415 Jy ! Component: 150 - total flux cleaned = 0.00050518 Jy ! Component: 200 - total flux cleaned = 0.000587014 Jy ! Total flux subtracted in 200 components = 0.000587014 Jy ! Clean residual min=-0.005433 max=0.005562 Jy/beam ! Clean residual mean=0.000001 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 1.31595 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 1.31595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112575Jy sigma=0.000705 ! Fit after self-cal, rms=0.112527Jy sigma=0.000704 wmodel J1048-1909_S_2015_01_23_pus_map.mod ! Writing 119 model components to file: J1048-1909_S_2015_01_23_pus_map.mod wobs J1048-1909_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1048-1909_S_2015_01_23_pus_uvs.fits wwins J1048-1909_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1048-1909_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466295 Jy ! Component: 100 - total flux cleaned = -9.32277e-05 Jy ! Component: 150 - total flux cleaned = 0.000170783 Jy ! Component: 200 - total flux cleaned = 0.000337907 Jy ! Component: 250 - total flux cleaned = -5.98989e-05 Jy ! Component: 300 - total flux cleaned = -0.000289838 Jy ! Component: 350 - total flux cleaned = -0.000215254 Jy ! Component: 400 - total flux cleaned = -0.000286879 Jy ! Component: 450 - total flux cleaned = -0.000355911 Jy ! Component: 500 - total flux cleaned = -0.00015128 Jy ! Component: 550 - total flux cleaned = -0.000218568 Jy ! Component: 600 - total flux cleaned = -0.00015366 Jy ! Component: 650 - total flux cleaned = -2.4079e-05 Jy ! Component: 700 - total flux cleaned = 0.000225425 Jy ! Component: 750 - total flux cleaned = 0.000407711 Jy ! Component: 800 - total flux cleaned = 0.000644977 Jy ! Component: 850 - total flux cleaned = 0.000761521 Jy ! Component: 900 - total flux cleaned = 0.000990565 Jy ! Component: 950 - total flux cleaned = 0.00121379 Jy ! Component: 1000 - total flux cleaned = 0.00132286 Jy ! Component: 1050 - total flux cleaned = 0.00153888 Jy ! Component: 1100 - total flux cleaned = 0.00164435 Jy ! Component: 1150 - total flux cleaned = 0.00159289 Jy ! Component: 1200 - total flux cleaned = 0.00174679 Jy ! Component: 1250 - total flux cleaned = 0.00164547 Jy ! Component: 1300 - total flux cleaned = 0.00169531 Jy ! Component: 1350 - total flux cleaned = 0.00174454 Jy ! Component: 1400 - total flux cleaned = 0.00193603 Jy ! Component: 1450 - total flux cleaned = 0.0017469 Jy ! Component: 1500 - total flux cleaned = 0.00179252 Jy ! Component: 1550 - total flux cleaned = 0.00165651 Jy ! Component: 1600 - total flux cleaned = 0.00161202 Jy ! Component: 1650 - total flux cleaned = 0.00174441 Jy ! Component: 1700 - total flux cleaned = 0.00165567 Jy ! Component: 1750 - total flux cleaned = 0.00165498 Jy ! Component: 1800 - total flux cleaned = 0.00169787 Jy ! Component: 1850 - total flux cleaned = 0.00190645 Jy ! Component: 1900 - total flux cleaned = 0.00186513 Jy ! Component: 1950 - total flux cleaned = 0.00198735 Jy ! Component: 2000 - total flux cleaned = 0.00214767 Jy ! Component: 2050 - total flux cleaned = 0.00226564 Jy ! Component: 2100 - total flux cleaned = 0.00226559 Jy ! Component: 2150 - total flux cleaned = 0.00245789 Jy ! Component: 2200 - total flux cleaned = 0.00253386 Jy ! Component: 2250 - total flux cleaned = 0.00257127 Jy ! Component: 2300 - total flux cleaned = 0.00272021 Jy ! Component: 2350 - total flux cleaned = 0.00286753 Jy ! Component: 2400 - total flux cleaned = 0.00286733 Jy ! Component: 2450 - total flux cleaned = 0.00297477 Jy ! Component: 2500 - total flux cleaned = 0.0028676 Jy ! Component: 2550 - total flux cleaned = 0.00297291 Jy ! Component: 2600 - total flux cleaned = 0.00297318 Jy ! Component: 2650 - total flux cleaned = 0.00300778 Jy ! Component: 2700 - total flux cleaned = 0.00294009 Jy ! Component: 2750 - total flux cleaned = 0.00297423 Jy ! Component: 2800 - total flux cleaned = 0.00297447 Jy ! Component: 2850 - total flux cleaned = 0.00304079 Jy ! Component: 2900 - total flux cleaned = 0.00287671 Jy ! Component: 2950 - total flux cleaned = 0.0028444 Jy ! Component: 3000 - total flux cleaned = 0.00271583 Jy ! Component: 3050 - total flux cleaned = 0.00274809 Jy ! Component: 3100 - total flux cleaned = 0.00274839 Jy ! Component: 3150 - total flux cleaned = 0.00259219 Jy ! Component: 3200 - total flux cleaned = 0.00256136 Jy ! Component: 3250 - total flux cleaned = 0.00253083 Jy ! Component: 3300 - total flux cleaned = 0.00253059 Jy ! Component: 3350 - total flux cleaned = 0.00243991 Jy ! Component: 3400 - total flux cleaned = 0.00241001 Jy ! Component: 3450 - total flux cleaned = 0.00235102 Jy ! Component: 3500 - total flux cleaned = 0.00240979 Jy ! Component: 3550 - total flux cleaned = 0.00229246 Jy ! Component: 3600 - total flux cleaned = 0.00226327 Jy ! Component: 3650 - total flux cleaned = 0.00217644 Jy ! Component: 3700 - total flux cleaned = 0.00200423 Jy ! Component: 3750 - total flux cleaned = 0.00189045 Jy ! Component: 3800 - total flux cleaned = 0.00180566 Jy ! Component: 3850 - total flux cleaned = 0.00180578 Jy ! Component: 3900 - total flux cleaned = 0.00161055 Jy ! Component: 3950 - total flux cleaned = 0.00161027 Jy ! Component: 4000 - total flux cleaned = 0.0015002 Jy ! Component: 4050 - total flux cleaned = 0.00147289 Jy ! Total flux subtracted in 4096 components = 0.00139121 Jy ! Clean residual min=-0.001607 max=0.001502 Jy/beam ! Clean residual mean=0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 1.31734 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 413 components and 1.31734 Jy ![Exited script file: muppet] wmap "J1048-1909_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.746 x 7.313 at 0.4803 degrees (North through East) ! Clean map min=-0.0037202 max=1.1278 Jy/beam ! Writing clean map to FITS file: J1048-1909_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.1278 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000484764 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.12895 0.12895 0.2579 0.5158 1.0316 2.0632 4.1264 8.2528 16.5056 33.0112 66.0224 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.746 x 7.313 at 0.4803 degrees (North through East) ! Clean map min=-0.0037202 max=1.1278 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1048-1909_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:22:21 2017