! Started logfile: J1041-4740_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:51:24 2016 obs J1041-4740_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1041-4740_S_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.392837 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1041-4740 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1041-4740_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.835397Jy sigma=0.006086 ! Fit after self-cal, rms=0.614417Jy sigma=0.004457 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=7.837 mas, bpa=-4.022 degrees ! Estimated noise=2069.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331265 Jy ! Component: 100 - total flux cleaned = 0.483247 Jy ! Total flux subtracted in 100 components = 0.483247 Jy ! Clean residual min=-0.081034 max=0.160462 Jy/beam ! Clean residual mean=-0.001242 rms=0.026126 Jy/beam ! Combined flux in latest and established models = 0.483247 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.483247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409598Jy sigma=0.002912 ! Fit after self-cal, rms=0.409023Jy sigma=0.002908 ! Inverting map ! Added new window around map position (9.5, 10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143313 Jy ! Component: 100 - total flux cleaned = 0.227346 Jy ! Total flux subtracted in 100 components = 0.227346 Jy ! Clean residual min=-0.062771 max=0.150482 Jy/beam ! Clean residual mean=-0.000713 rms=0.019439 Jy/beam ! Combined flux in latest and established models = 0.710593 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.710592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318135Jy sigma=0.002239 ! Fit after self-cal, rms=0.303910Jy sigma=0.002127 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=10.17 mas, bpa=-4.522 degrees ! Estimated noise=1061.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143313 Jy ! Component: 100 - total flux cleaned = 0.227345 Jy ! Component: 150 - total flux cleaned = 0.280083 Jy ! Component: 200 - total flux cleaned = 0.300655 Jy ! Total flux subtracted in 200 components = 0.300655 Jy ! Clean residual min=-0.053022 max=0.117012 Jy/beam ! Clean residual mean=-0.000813 rms=0.016559 Jy/beam ! Combined flux in latest and established models = 1.01125 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 1.01125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219257Jy sigma=0.001527 ! Fit after self-cal, rms=0.212404Jy sigma=0.001469 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.00* KP 0.97 ! LA 1.11 MK 0.94 NL 1.00* OV 1.14 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.94 ! LA 1.08 MK 0.93 NL 1.00* OV 1.20 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.22 HN 1.00* KP 0.85 ! LA 0.85 MK 0.96 NL 1.00* OV 1.14 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.83 ! LA 0.83 MK 0.96 NL 1.00* OV 1.24 ! PT 0.95 SC 0.90 ! ! ! Fit before self-cal, rms=0.212404Jy sigma=0.001469 ! Fit after self-cal, rms=0.191391Jy sigma=0.001254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=10.16 mas, bpa=-4.92 degrees ! Estimated noise=1037.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373641 Jy ! Component: 100 - total flux cleaned = -0.00187497 Jy ! Component: 150 - total flux cleaned = -0.00185326 Jy ! Component: 200 - total flux cleaned = -0.00180758 Jy ! Total flux subtracted in 200 components = -0.00180758 Jy ! Clean residual min=-0.044256 max=0.063938 Jy/beam ! Clean residual mean=-0.000279 rms=0.010782 Jy/beam ! Combined flux in latest and established models = 1.00944 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 1.00944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179255Jy sigma=0.001180 ! Fit after self-cal, rms=0.178435Jy sigma=0.001170 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178435Jy sigma=0.001170 ! Fit after self-cal, rms=0.168113Jy sigma=0.001114 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=10.17 mas, bpa=-5.69 degrees ! Estimated noise=1010.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482297 Jy ! Component: 100 - total flux cleaned = 0.00409082 Jy ! Component: 150 - total flux cleaned = 0.00411295 Jy ! Component: 200 - total flux cleaned = 0.00349342 Jy ! Total flux subtracted in 200 components = 0.00349342 Jy ! Clean residual min=-0.036508 max=0.050907 Jy/beam ! Clean residual mean=-0.000112 rms=0.008519 Jy/beam ! Combined flux in latest and established models = 1.01293 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 1.01293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159980Jy sigma=0.001065 ! Fit after self-cal, rms=0.159140Jy sigma=0.001056 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204433 Jy ! Component: 100 - total flux cleaned = 0.0151609 Jy ! Component: 150 - total flux cleaned = 0.0114793 Jy ! Component: 200 - total flux cleaned = 0.00818544 Jy ! Total flux subtracted in 200 components = 0.00818544 Jy ! Clean residual min=-0.029621 max=0.044485 Jy/beam ! Clean residual mean=-0.000036 rms=0.007152 Jy/beam ! Combined flux in latest and established models = 1.02112 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 1.02112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144893Jy sigma=0.000981 ! Fit after self-cal, rms=0.142467Jy sigma=0.000959 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142467Jy sigma=0.000959 ! Fit after self-cal, rms=0.135339Jy sigma=0.000938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=10.3 mas, bpa=-6.297 degrees ! Estimated noise=976.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135017 Jy ! Component: 100 - total flux cleaned = 0.0113775 Jy ! Component: 150 - total flux cleaned = 0.00868858 Jy ! Component: 200 - total flux cleaned = 0.00752297 Jy ! Total flux subtracted in 200 components = 0.00752297 Jy ! Clean residual min=-0.026598 max=0.034319 Jy/beam ! Clean residual mean=0.000003 rms=0.005507 Jy/beam ! Combined flux in latest and established models = 1.02864 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 1.02864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127874Jy sigma=0.000898 ! Fit after self-cal, rms=0.126537Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208621 Jy ! Component: 100 - total flux cleaned = 0.0253321 Jy ! Component: 150 - total flux cleaned = 0.0272414 Jy ! Component: 200 - total flux cleaned = 0.0292306 Jy ! Total flux subtracted in 200 components = 0.0292306 Jy ! Clean residual min=-0.023167 max=0.014624 Jy/beam ! Clean residual mean=0.000227 rms=0.004299 Jy/beam ! Combined flux in latest and established models = 1.05787 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 135 components and 1.05787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119128Jy sigma=0.000844 ! Fit after self-cal, rms=0.119061Jy sigma=0.000843 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119061Jy sigma=0.000843 ! Fit after self-cal, rms=0.116037Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.2 mas, bmaj=36.06 mas, bpa=-0.6761 degrees ! Estimated noise=1312.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109206 Jy ! Component: 100 - total flux cleaned = 0.0114113 Jy ! Component: 150 - total flux cleaned = 0.0109838 Jy ! Component: 200 - total flux cleaned = 0.0105898 Jy ! Total flux subtracted in 200 components = 0.0105898 Jy ! Clean residual min=-0.012935 max=0.012650 Jy/beam ! Clean residual mean=0.000353 rms=0.004307 Jy/beam ! Combined flux in latest and established models = 1.06846 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 158 components and 1.06846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113127Jy sigma=0.000819 ! Fit after self-cal, rms=0.112939Jy sigma=0.000818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027838 Jy ! Component: 100 - total flux cleaned = -0.000713983 Jy ! Component: 150 - total flux cleaned = -0.00160584 Jy ! Component: 200 - total flux cleaned = -0.00218347 Jy ! Total flux subtracted in 200 components = -0.00218347 Jy ! Clean residual min=-0.011377 max=0.010994 Jy/beam ! Clean residual mean=0.000336 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 1.06628 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 1.06628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112089Jy sigma=0.000816 ! Fit after self-cal, rms=0.111992Jy sigma=0.000816 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=10.43 mas, bpa=-6.279 degrees ! Estimated noise=976.154 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 10.43 at -6.279 degrees (North through East) ! Clean map min=-0.039937 max=0.37692 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=8.01 mas, bpa=-5.455 degrees ! Estimated noise=1889.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32557 Jy ! Component: 100 - total flux cleaned = 0.511838 Jy ! Component: 150 - total flux cleaned = 0.634846 Jy ! Component: 200 - total flux cleaned = 0.725603 Jy ! Total flux subtracted in 200 components = 0.725603 Jy ! Clean residual min=-0.029438 max=0.065620 Jy/beam ! Clean residual mean=-0.000603 rms=0.011462 Jy/beam ! Combined flux in latest and established models = 0.725603 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.725603 Jy ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=10.43 mas, bpa=-6.279 degrees ! Estimated noise=976.154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136486 Jy ! Component: 100 - total flux cleaned = 0.211461 Jy ! Component: 150 - total flux cleaned = 0.260448 Jy ! Component: 200 - total flux cleaned = 0.293865 Jy ! Total flux subtracted in 200 components = 0.293865 Jy ! Clean residual min=-0.021395 max=0.020326 Jy/beam ! Clean residual mean=-0.000161 rms=0.005784 Jy/beam ! Combined flux in latest and established models = 1.01947 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 144 components and 1.01947 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.2 mas, bmaj=36.06 mas, bpa=-0.6761 degrees ! Estimated noise=1312.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363612 Jy ! Component: 100 - total flux cleaned = 0.0426068 Jy ! Component: 150 - total flux cleaned = 0.0452756 Jy ! Component: 200 - total flux cleaned = 0.0459255 Jy ! Total flux subtracted in 200 components = 0.0459255 Jy ! Clean residual min=-0.019737 max=0.014560 Jy/beam ! Clean residual mean=0.000340 rms=0.005195 Jy/beam ! Combined flux in latest and established models = 1.06539 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99793e-05 Jy ! Component: 100 - total flux cleaned = 6.69028e-05 Jy ! Component: 150 - total flux cleaned = 0.000426592 Jy ! Component: 200 - total flux cleaned = 0.000124979 Jy ! Total flux subtracted in 200 components = 0.000124979 Jy ! Clean residual min=-0.016913 max=0.012526 Jy/beam ! Clean residual mean=0.000354 rms=0.004242 Jy/beam ! Combined flux in latest and established models = 1.06552 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 208 components and 1.06552 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=10.43 mas, bpa=-6.279 degrees ! Estimated noise=976.154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297799 Jy ! Component: 100 - total flux cleaned = 0.00207962 Jy ! Component: 150 - total flux cleaned = 0.00129145 Jy ! Component: 200 - total flux cleaned = 0.000617858 Jy ! Total flux subtracted in 200 components = 0.000617858 Jy ! Clean residual min=-0.016792 max=0.011038 Jy/beam ! Clean residual mean=0.000186 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 1.06614 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 232 components and 1.06614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109844Jy sigma=0.000803 ! Fit after self-cal, rms=0.109436Jy sigma=0.000799 wmodel J1041-4740_S_2014_06_09_pus_map.mod ! Writing 232 model components to file: J1041-4740_S_2014_06_09_pus_map.mod wobs J1041-4740_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1041-4740_S_2014_06_09_pus_uvs.fits wwins J1041-4740_S_2014_06_09_pus_map.win ! wwins: Wrote 5 windows to J1041-4740_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00644362 Jy ! Component: 100 - total flux cleaned = -0.0105089 Jy ! Component: 150 - total flux cleaned = -0.0121618 Jy ! Component: 200 - total flux cleaned = -0.0126454 Jy ! Component: 250 - total flux cleaned = -0.0127973 Jy ! Component: 300 - total flux cleaned = -0.0127992 Jy ! Component: 350 - total flux cleaned = -0.0129355 Jy ! Component: 400 - total flux cleaned = -0.0131869 Jy ! Component: 450 - total flux cleaned = -0.0135441 Jy ! Component: 500 - total flux cleaned = -0.0138833 Jy ! Component: 550 - total flux cleaned = -0.0142061 Jy ! Component: 600 - total flux cleaned = -0.0144162 Jy ! Component: 650 - total flux cleaned = -0.0143174 Jy ! Component: 700 - total flux cleaned = -0.0141221 Jy ! Component: 750 - total flux cleaned = -0.0135605 Jy ! Component: 800 - total flux cleaned = -0.0131974 Jy ! Component: 850 - total flux cleaned = -0.0130205 Jy ! Component: 900 - total flux cleaned = -0.0126751 Jy ! Component: 950 - total flux cleaned = -0.0121708 Jy ! Component: 1000 - total flux cleaned = -0.0118452 Jy ! Component: 1050 - total flux cleaned = -0.011526 Jy ! Component: 1100 - total flux cleaned = -0.0111358 Jy ! Component: 1150 - total flux cleaned = -0.0106772 Jy ! Component: 1200 - total flux cleaned = -0.0101555 Jy ! Component: 1250 - total flux cleaned = -0.0097901 Jy ! Component: 1300 - total flux cleaned = -0.00928716 Jy ! Component: 1350 - total flux cleaned = -0.00886436 Jy ! Component: 1400 - total flux cleaned = -0.00817573 Jy ! Component: 1450 - total flux cleaned = -0.00777134 Jy ! Component: 1500 - total flux cleaned = -0.00717504 Jy ! Component: 1550 - total flux cleaned = -0.00691571 Jy ! Component: 1600 - total flux cleaned = -0.0065948 Jy ! Component: 1650 - total flux cleaned = -0.0063424 Jy ! Component: 1700 - total flux cleaned = -0.0060938 Jy ! Component: 1750 - total flux cleaned = -0.00591149 Jy ! Component: 1800 - total flux cleaned = -0.00579073 Jy ! Component: 1850 - total flux cleaned = -0.00537547 Jy ! Component: 1900 - total flux cleaned = -0.00496645 Jy ! Component: 1950 - total flux cleaned = -0.00479349 Jy ! Component: 2000 - total flux cleaned = -0.00462168 Jy ! Component: 2050 - total flux cleaned = -0.00428082 Jy ! Component: 2100 - total flux cleaned = -0.00416807 Jy ! Component: 2150 - total flux cleaned = -0.00411199 Jy ! Component: 2200 - total flux cleaned = -0.00400075 Jy ! Component: 2250 - total flux cleaned = -0.00405608 Jy ! Component: 2300 - total flux cleaned = -0.00411142 Jy ! Component: 2350 - total flux cleaned = -0.00411152 Jy ! Component: 2400 - total flux cleaned = -0.0042217 Jy ! Component: 2450 - total flux cleaned = -0.00422161 Jy ! Component: 2500 - total flux cleaned = -0.00433186 Jy ! Component: 2550 - total flux cleaned = -0.00438697 Jy ! Component: 2600 - total flux cleaned = -0.00449696 Jy ! Component: 2650 - total flux cleaned = -0.00460758 Jy ! Component: 2700 - total flux cleaned = -0.00460774 Jy ! Component: 2750 - total flux cleaned = -0.0046633 Jy ! Component: 2800 - total flux cleaned = -0.00477481 Jy ! Component: 2850 - total flux cleaned = -0.00477553 Jy ! Component: 2900 - total flux cleaned = -0.0047757 Jy ! Component: 2950 - total flux cleaned = -0.00488818 Jy ! Component: 3000 - total flux cleaned = -0.00488835 Jy ! Component: 3050 - total flux cleaned = -0.00511418 Jy ! Component: 3100 - total flux cleaned = -0.00511446 Jy ! Component: 3150 - total flux cleaned = -0.00534201 Jy ! Component: 3200 - total flux cleaned = -0.00545654 Jy ! Component: 3250 - total flux cleaned = -0.00557153 Jy ! Component: 3300 - total flux cleaned = -0.00562959 Jy ! Component: 3350 - total flux cleaned = -0.0057461 Jy ! Component: 3400 - total flux cleaned = -0.00574637 Jy ! Component: 3450 - total flux cleaned = -0.00586366 Jy ! Component: 3500 - total flux cleaned = -0.00586405 Jy ! Component: 3550 - total flux cleaned = -0.0059832 Jy ! Component: 3600 - total flux cleaned = -0.00598387 Jy ! Component: 3650 - total flux cleaned = -0.00598436 Jy ! Component: 3700 - total flux cleaned = -0.00598496 Jy ! Component: 3750 - total flux cleaned = -0.00598441 Jy ! Component: 3800 - total flux cleaned = -0.00598489 Jy ! Component: 3850 - total flux cleaned = -0.00598463 Jy ! Component: 3900 - total flux cleaned = -0.00598472 Jy ! Component: 3950 - total flux cleaned = -0.00598485 Jy ! Component: 4000 - total flux cleaned = -0.00592098 Jy ! Component: 4050 - total flux cleaned = -0.00592106 Jy ! Total flux subtracted in 4096 components = -0.00592117 Jy ! Clean residual min=-0.004070 max=0.003520 Jy/beam ! Clean residual mean=-0.000036 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 1.06021 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 493 components and 1.06021 Jy ![Exited script file: muppet] wmap "J1041-4740_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 10.43 at -6.279 degrees (North through East) ! Clean map min=-0.027909 max=0.29463 Jy/beam ! Writing clean map to FITS file: J1041-4740_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.294633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124326 device "J1041-4740_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1041-4740_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2659 1.2659 2.5318 5.06361 10.1272 20.2544 40.5088 81.0177 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.294 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 10.43 at -6.279 degrees (North through East) ! Clean map min=-0.027909 max=0.29463 Jy/beam quit ! Quitting program ! Log file J1041-4740_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:51:29 2016