! Started logfile: J1038-4325_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:18 2017 obs J1038-4325_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1038-4325_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.429012 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1038-4325 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1038-4325_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 427 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 418 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 419 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.815168Jy sigma=0.005844 ! Fit after self-cal, rms=0.740098Jy sigma=0.005337 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=7.257 mas, bpa=-4.731 degrees ! Estimated noise=2343.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194507 Jy ! Component: 100 - total flux cleaned = 0.253031 Jy ! Total flux subtracted in 100 components = 0.253031 Jy ! Clean residual min=-0.018178 max=0.029698 Jy/beam ! Clean residual mean=0.000068 rms=0.005378 Jy/beam ! Combined flux in latest and established models = 0.253031 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.253031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131402Jy sigma=0.000888 ! Fit after self-cal, rms=0.131300Jy sigma=0.000888 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=8.951 mas, bpa=-2.582 degrees ! Estimated noise=1156.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034304 Jy ! Component: 100 - total flux cleaned = 0.0478273 Jy ! Component: 150 - total flux cleaned = 0.0539831 Jy ! Component: 200 - total flux cleaned = 0.0546439 Jy ! Total flux subtracted in 200 components = 0.0546439 Jy ! Clean residual min=-0.012258 max=0.019105 Jy/beam ! Clean residual mean=-0.000106 rms=0.004296 Jy/beam ! Combined flux in latest and established models = 0.307675 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.307675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123976Jy sigma=0.000824 ! Fit after self-cal, rms=0.123898Jy sigma=0.000823 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 KP 1.00* LA 0.98 ! MK 1.01 NL 1.43 OV 0.95 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 KP 1.00* LA 0.98 ! MK 1.00 NL 1.52 OV 1.00 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 KP 1.00* LA 0.79 ! MK 1.01 NL 1.42 OV 0.94 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 KP 1.00* LA 0.86 ! MK 1.03 NL 1.59 OV 0.99 PT 1.00 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.123898Jy sigma=0.000823 ! Fit after self-cal, rms=0.126380Jy sigma=0.000760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=8.926 mas, bpa=-1.994 degrees ! Estimated noise=1156.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331418 Jy ! Component: 100 - total flux cleaned = -0.000415987 Jy ! Component: 150 - total flux cleaned = -0.000346778 Jy ! Component: 200 - total flux cleaned = -0.000280873 Jy ! Total flux subtracted in 200 components = -0.000280873 Jy ! Clean residual min=-0.004347 max=0.004922 Jy/beam ! Clean residual mean=-0.000203 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.307394 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.307394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126285Jy sigma=0.000759 ! Fit after self-cal, rms=0.126678Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126678Jy sigma=0.000758 ! Fit after self-cal, rms=0.127033Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=8.889 mas, bpa=-2.093 degrees ! Estimated noise=1154.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541691 Jy ! Component: 100 - total flux cleaned = 0.000301777 Jy ! Component: 150 - total flux cleaned = 0.000261189 Jy ! Component: 200 - total flux cleaned = 0.000261746 Jy ! Total flux subtracted in 200 components = 0.000261746 Jy ! Clean residual min=-0.003282 max=0.004393 Jy/beam ! Clean residual mean=-0.000026 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.307656 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.307656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126988Jy sigma=0.000756 ! Fit after self-cal, rms=0.127006Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363111 Jy ! Component: 100 - total flux cleaned = 0.00422611 Jy ! Component: 150 - total flux cleaned = 0.00444596 Jy ! Component: 200 - total flux cleaned = 0.00454301 Jy ! Total flux subtracted in 200 components = 0.00454301 Jy ! Clean residual min=-0.003102 max=0.003461 Jy/beam ! Clean residual mean=-0.000024 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.312199 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.312199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126855Jy sigma=0.000755 ! Fit after self-cal, rms=0.126827Jy sigma=0.000755 ! Inverting map ! Added new window around map position (-93.5, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148696 Jy ! Component: 100 - total flux cleaned = 0.00168002 Jy ! Component: 150 - total flux cleaned = 0.00210316 Jy ! Component: 200 - total flux cleaned = 0.00247864 Jy ! Total flux subtracted in 200 components = 0.00247864 Jy ! Clean residual min=-0.002852 max=0.002429 Jy/beam ! Clean residual mean=-0.000036 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.314678 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 81 components and 0.314678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126717Jy sigma=0.000755 ! Fit after self-cal, rms=0.126703Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126703Jy sigma=0.000755 ! Fit after self-cal, rms=0.126263Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=8.871 mas, bpa=-2.124 degrees ! Estimated noise=1151.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930904 Jy ! Component: 100 - total flux cleaned = 0.00121406 Jy ! Component: 150 - total flux cleaned = 0.00125556 Jy ! Component: 200 - total flux cleaned = 0.0012912 Jy ! Total flux subtracted in 200 components = 0.0012912 Jy ! Clean residual min=-0.002653 max=0.002270 Jy/beam ! Clean residual mean=-0.000020 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.315969 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.315969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126220Jy sigma=0.000754 ! Fit after self-cal, rms=0.126210Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030739 Jy ! Component: 100 - total flux cleaned = 0.00043393 Jy ! Component: 150 - total flux cleaned = 0.00049316 Jy ! Component: 200 - total flux cleaned = 0.000549417 Jy ! Total flux subtracted in 200 components = 0.000549417 Jy ! Clean residual min=-0.002599 max=0.002200 Jy/beam ! Clean residual mean=-0.000021 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.316518 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 97 components and 0.316518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126189Jy sigma=0.000754 ! Fit after self-cal, rms=0.126184Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126184Jy sigma=0.000754 ! Fit after self-cal, rms=0.126023Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=27.63 mas, bpa=5.698 degrees ! Estimated noise=1540.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415132 Jy ! Component: 100 - total flux cleaned = 0.000422394 Jy ! Component: 150 - total flux cleaned = 0.000347223 Jy ! Component: 200 - total flux cleaned = 0.000283009 Jy ! Total flux subtracted in 200 components = 0.000283009 Jy ! Clean residual min=-0.001995 max=0.002193 Jy/beam ! Clean residual mean=-0.000044 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.316801 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 106 components and 0.316801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126017Jy sigma=0.000754 ! Fit after self-cal, rms=0.126013Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96555e-05 Jy ! Component: 100 - total flux cleaned = 4.1752e-05 Jy ! Component: 150 - total flux cleaned = 1.40954e-05 Jy ! Component: 200 - total flux cleaned = 2.67956e-05 Jy ! Total flux subtracted in 200 components = 2.67956e-05 Jy ! Clean residual min=-0.001981 max=0.002224 Jy/beam ! Clean residual mean=-0.000043 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.316828 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 113 components and 0.316828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126009Jy sigma=0.000754 ! Fit after self-cal, rms=0.126008Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=8.864 mas, bpa=-2.143 degrees ! Estimated noise=1150.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 8.864 at -2.143 degrees (North through East) ! Clean map min=-0.0025009 max=0.26159 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=7.195 mas, bpa=-4.01 degrees ! Estimated noise=2328.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192533 Jy ! Component: 100 - total flux cleaned = 0.248937 Jy ! Component: 150 - total flux cleaned = 0.274696 Jy ! Component: 200 - total flux cleaned = 0.287072 Jy ! Total flux subtracted in 200 components = 0.287072 Jy ! Clean residual min=-0.009417 max=0.010948 Jy/beam ! Clean residual mean=0.000026 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 0.287072 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.287072 Jy ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=8.864 mas, bpa=-2.143 degrees ! Estimated noise=1150.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120552 Jy ! Component: 100 - total flux cleaned = 0.0176731 Jy ! Component: 150 - total flux cleaned = 0.0214981 Jy ! Component: 200 - total flux cleaned = 0.0233116 Jy ! Total flux subtracted in 200 components = 0.0233116 Jy ! Clean residual min=-0.002964 max=0.002454 Jy/beam ! Clean residual mean=-0.000018 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.310383 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.310383 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=27.63 mas, bpa=5.698 degrees ! Estimated noise=1540.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237416 Jy ! Component: 100 - total flux cleaned = 0.00364842 Jy ! Component: 150 - total flux cleaned = 0.00454114 Jy ! Component: 200 - total flux cleaned = 0.00521161 Jy ! Total flux subtracted in 200 components = 0.00521161 Jy ! Clean residual min=-0.002351 max=0.002278 Jy/beam ! Clean residual mean=-0.000045 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.315595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281912 Jy ! Component: 100 - total flux cleaned = 0.000454796 Jy ! Component: 150 - total flux cleaned = 0.000644058 Jy ! Component: 200 - total flux cleaned = 0.000783789 Jy ! Total flux subtracted in 200 components = 0.000783789 Jy ! Clean residual min=-0.002197 max=0.002235 Jy/beam ! Clean residual mean=-0.000049 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.316379 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.316379 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=8.864 mas, bpa=-2.143 degrees ! Estimated noise=1150.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500766 Jy ! Component: 100 - total flux cleaned = -0.000504971 Jy ! Component: 150 - total flux cleaned = -0.000316377 Jy ! Component: 200 - total flux cleaned = -0.000234342 Jy ! Total flux subtracted in 200 components = -0.000234342 Jy ! Clean residual min=-0.002688 max=0.002337 Jy/beam ! Clean residual mean=-0.000017 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.316144 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 0.316144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126030Jy sigma=0.000754 ! Fit after self-cal, rms=0.126026Jy sigma=0.000754 wmodel J1038-4325_S_2014_01_04_pus_map.mod ! Writing 85 model components to file: J1038-4325_S_2014_01_04_pus_map.mod wobs J1038-4325_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1038-4325_S_2014_01_04_pus_uvs.fits wwins J1038-4325_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1038-4325_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000669541 Jy ! Component: 100 - total flux cleaned = -0.000796019 Jy ! Component: 150 - total flux cleaned = -0.000869086 Jy ! Component: 200 - total flux cleaned = -0.000938382 Jy ! Component: 250 - total flux cleaned = -0.000873006 Jy ! Component: 300 - total flux cleaned = -0.000904311 Jy ! Component: 350 - total flux cleaned = -0.000874766 Jy ! Component: 400 - total flux cleaned = -0.000875307 Jy ! Component: 450 - total flux cleaned = -0.00073658 Jy ! Component: 500 - total flux cleaned = -0.000655525 Jy ! Component: 550 - total flux cleaned = -0.000524794 Jy ! Component: 600 - total flux cleaned = -0.00055053 Jy ! Component: 650 - total flux cleaned = -0.00050067 Jy ! Component: 700 - total flux cleaned = -0.000452541 Jy ! Component: 750 - total flux cleaned = -0.000500669 Jy ! Component: 800 - total flux cleaned = -0.000430255 Jy ! Component: 850 - total flux cleaned = -0.000384557 Jy ! Component: 900 - total flux cleaned = -0.000429911 Jy ! Component: 950 - total flux cleaned = -0.000407913 Jy ! Component: 1000 - total flux cleaned = -0.00045115 Jy ! Component: 1050 - total flux cleaned = -0.000408493 Jy ! Component: 1100 - total flux cleaned = -0.000450496 Jy ! Component: 1150 - total flux cleaned = -0.00047068 Jy ! Component: 1200 - total flux cleaned = -0.00049066 Jy ! Component: 1250 - total flux cleaned = -0.000490385 Jy ! Component: 1300 - total flux cleaned = -0.000490308 Jy ! Component: 1350 - total flux cleaned = -0.000471553 Jy ! Component: 1400 - total flux cleaned = -0.000509427 Jy ! Component: 1450 - total flux cleaned = -0.000509482 Jy ! Component: 1500 - total flux cleaned = -0.000472751 Jy ! Component: 1550 - total flux cleaned = -0.000400715 Jy ! Component: 1600 - total flux cleaned = -0.000418409 Jy ! Component: 1650 - total flux cleaned = -0.000418274 Jy ! Component: 1700 - total flux cleaned = -0.000400934 Jy ! Component: 1750 - total flux cleaned = -0.000418038 Jy ! Component: 1800 - total flux cleaned = -0.000400876 Jy ! Component: 1850 - total flux cleaned = -0.000401034 Jy ! Component: 1900 - total flux cleaned = -0.000367584 Jy ! Component: 1950 - total flux cleaned = -0.000350942 Jy ! Component: 2000 - total flux cleaned = -0.000334602 Jy ! Component: 2050 - total flux cleaned = -0.000334492 Jy ! Component: 2100 - total flux cleaned = -0.00030215 Jy ! Component: 2150 - total flux cleaned = -0.000302078 Jy ! Component: 2200 - total flux cleaned = -0.000333571 Jy ! Component: 2250 - total flux cleaned = -0.000270735 Jy ! Component: 2300 - total flux cleaned = -0.000255304 Jy ! Component: 2350 - total flux cleaned = -0.000332844 Jy ! Component: 2400 - total flux cleaned = -0.000271044 Jy ! Component: 2450 - total flux cleaned = -0.000255847 Jy ! Component: 2500 - total flux cleaned = -0.000286412 Jy ! Component: 2550 - total flux cleaned = -0.000271144 Jy ! Component: 2600 - total flux cleaned = -0.000225746 Jy ! Component: 2650 - total flux cleaned = -0.00021071 Jy ! Component: 2700 - total flux cleaned = -0.000165634 Jy ! Component: 2750 - total flux cleaned = -0.000105734 Jy ! Component: 2800 - total flux cleaned = -7.5902e-05 Jy ! Component: 2850 - total flux cleaned = -6.09656e-05 Jy ! Component: 2900 - total flux cleaned = -3.12451e-05 Jy ! Component: 2950 - total flux cleaned = 1.3078e-05 Jy ! Component: 3000 - total flux cleaned = 5.73344e-05 Jy ! Component: 3050 - total flux cleaned = 0.000116213 Jy ! Component: 3100 - total flux cleaned = 0.000174984 Jy ! Component: 3150 - total flux cleaned = 0.000233639 Jy ! Component: 3200 - total flux cleaned = 0.000277543 Jy ! Component: 3250 - total flux cleaned = 0.000379758 Jy ! Component: 3300 - total flux cleaned = 0.000482049 Jy ! Component: 3350 - total flux cleaned = 0.000554991 Jy ! Component: 3400 - total flux cleaned = 0.000598742 Jy ! Component: 3450 - total flux cleaned = 0.00062795 Jy ! Component: 3500 - total flux cleaned = 0.000671676 Jy ! Component: 3550 - total flux cleaned = 0.000730097 Jy ! Component: 3600 - total flux cleaned = 0.000817685 Jy ! Component: 3650 - total flux cleaned = 0.000832315 Jy ! Component: 3700 - total flux cleaned = 0.000890769 Jy ! Component: 3750 - total flux cleaned = 0.000949295 Jy ! Component: 3800 - total flux cleaned = 0.000963927 Jy ! Component: 3850 - total flux cleaned = 0.0010225 Jy ! Component: 3900 - total flux cleaned = 0.00105175 Jy ! Component: 3950 - total flux cleaned = 0.00112518 Jy ! Component: 4000 - total flux cleaned = 0.00121333 Jy ! Component: 4050 - total flux cleaned = 0.00127222 Jy ! Total flux subtracted in 4096 components = 0.00133143 Jy ! Clean residual min=-0.000819 max=0.000904 Jy/beam ! Clean residual mean=-0.000004 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.317476 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 307 components and 0.317476 Jy ![Exited script file: muppet] wmap "J1038-4325_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 8.864 at -2.143 degrees (North through East) ! Clean map min=-0.0026154 max=0.26323 Jy/beam ! Writing clean map to FITS file: J1038-4325_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.263234 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289722 0.289722 0.579445 1.15889 2.31778 4.63556 9.27112 18.5422 37.0845 74.1689 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.263 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 8.864 at -2.143 degrees (North through East) ! Clean map min=-0.0026154 max=0.26323 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1038-4325_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:23 2017