! Started logfile: J1037-2934_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:21:47 2017 obs J1037-2934_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2015_01_23_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.461905 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.692916Jy sigma=0.004816 ! Fit after self-cal, rms=0.633216Jy sigma=0.004505 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.187 mas, bmaj=6.059 mas, bpa=-7.56 degrees ! Estimated noise=2272.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.377637 Jy ! Component: 100 - total flux cleaned = 0.549013 Jy ! Total flux subtracted in 100 components = 0.549013 Jy ! Clean residual min=-0.055670 max=0.097765 Jy/beam ! Clean residual mean=-0.000062 rms=0.017199 Jy/beam ! Combined flux in latest and established models = 0.549013 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.549013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328576Jy sigma=0.002478 ! Fit after self-cal, rms=0.327414Jy sigma=0.002473 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.671 mas, bpa=-8.273 degrees ! Estimated noise=1989.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152821 Jy ! Component: 100 - total flux cleaned = 0.234732 Jy ! Component: 150 - total flux cleaned = 0.281639 Jy ! Component: 200 - total flux cleaned = 0.309919 Jy ! Total flux subtracted in 200 components = 0.309919 Jy ! Clean residual min=-0.047253 max=0.082337 Jy/beam ! Clean residual mean=-0.000040 rms=0.017682 Jy/beam ! Combined flux in latest and established models = 0.858932 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.858932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290022Jy sigma=0.001669 ! Fit after self-cal, rms=0.289768Jy sigma=0.001667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 2.56 HN 1.17 KP 0.95 ! LA 0.88 MK 1.11 NL 1.14 OV 1.00* ! PT 0.90 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 2.83 HN 1.25 KP 0.88 ! LA 0.87 MK 1.07 NL 1.37 OV 1.00* ! PT 0.88 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 3.22 HN 1.26 KP 0.77 ! LA 0.69 MK 1.06 NL 1.16 OV 1.00* ! PT 0.86 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 2.54 HN 1.18 KP 0.72 ! LA 0.73 MK 1.06 NL 0.99 OV 1.00* ! PT 0.89 SC 0.85 ! ! ! Fit before self-cal, rms=0.289768Jy sigma=0.001667 ! Fit after self-cal, rms=0.308069Jy sigma=0.000877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.659 mas, bpa=-6.61 degrees ! Estimated noise=1989.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00299485 Jy ! Component: 100 - total flux cleaned = -0.00412621 Jy ! Component: 150 - total flux cleaned = -0.00502193 Jy ! Component: 200 - total flux cleaned = -0.00542589 Jy ! Total flux subtracted in 200 components = -0.00542589 Jy ! Clean residual min=-0.014381 max=0.019415 Jy/beam ! Clean residual mean=-0.000003 rms=0.003912 Jy/beam ! Combined flux in latest and established models = 0.853506 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.853506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307757Jy sigma=0.000867 ! Fit after self-cal, rms=0.309173Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309173Jy sigma=0.000865 ! Fit after self-cal, rms=0.304940Jy sigma=0.000833 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=6.692 mas, bpa=-6.882 degrees ! Estimated noise=2000.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298081 Jy ! Component: 100 - total flux cleaned = -0.00338265 Jy ! Component: 150 - total flux cleaned = -0.00356444 Jy ! Component: 200 - total flux cleaned = -0.00356558 Jy ! Total flux subtracted in 200 components = -0.00356558 Jy ! Clean residual min=-0.013781 max=0.017890 Jy/beam ! Clean residual mean=0.000004 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.849941 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.849941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304749Jy sigma=0.000827 ! Fit after self-cal, rms=0.304822Jy sigma=0.000827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012024 Jy ! Component: 100 - total flux cleaned = 0.0128712 Jy ! Component: 150 - total flux cleaned = 0.0140788 Jy ! Component: 200 - total flux cleaned = 0.0145134 Jy ! Total flux subtracted in 200 components = 0.0145134 Jy ! Clean residual min=-0.012167 max=0.012370 Jy/beam ! Clean residual mean=0.000004 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.864454 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.864454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303864Jy sigma=0.000810 ! Fit after self-cal, rms=0.303803Jy sigma=0.000809 ! Inverting map ! Added new window around map position (3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068867 Jy ! Component: 100 - total flux cleaned = 0.00628193 Jy ! Component: 150 - total flux cleaned = 0.00545778 Jy ! Component: 200 - total flux cleaned = 0.00496849 Jy ! Total flux subtracted in 200 components = 0.00496849 Jy ! Clean residual min=-0.011278 max=0.011043 Jy/beam ! Clean residual mean=0.000003 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.869422 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.869423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303061Jy sigma=0.000796 ! Fit after self-cal, rms=0.303027Jy sigma=0.000796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303027Jy sigma=0.000796 ! Fit after self-cal, rms=0.301476Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.622 mas, bmaj=6.669 mas, bpa=-6.75 degrees ! Estimated noise=1989.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055269 Jy ! Component: 100 - total flux cleaned = 0.00574856 Jy ! Component: 150 - total flux cleaned = 0.00574755 Jy ! Component: 200 - total flux cleaned = 0.00610081 Jy ! Total flux subtracted in 200 components = 0.00610081 Jy ! Clean residual min=-0.010069 max=0.009973 Jy/beam ! Clean residual mean=0.000005 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.875523 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.875523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301128Jy sigma=0.000781 ! Fit after self-cal, rms=0.301220Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211553 Jy ! Component: 100 - total flux cleaned = 0.00261882 Jy ! Component: 150 - total flux cleaned = 0.00307488 Jy ! Component: 200 - total flux cleaned = 0.00364491 Jy ! Total flux subtracted in 200 components = 0.00364491 Jy ! Clean residual min=-0.009748 max=0.008565 Jy/beam ! Clean residual mean=0.000006 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.879168 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.879168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301030Jy sigma=0.000777 ! Fit after self-cal, rms=0.301042Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301042Jy sigma=0.000777 ! Fit after self-cal, rms=0.300725Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.92 mas, bmaj=15.35 mas, bpa=-3.066 degrees ! Estimated noise=2887.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043698 Jy ! Component: 100 - total flux cleaned = 0.00523193 Jy ! Component: 150 - total flux cleaned = 0.00594129 Jy ! Component: 200 - total flux cleaned = 0.00675997 Jy ! Total flux subtracted in 200 components = 0.00675997 Jy ! Clean residual min=-0.008970 max=0.007934 Jy/beam ! Clean residual mean=0.000014 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.885928 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 98 components and 0.885928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300586Jy sigma=0.000778 ! Fit after self-cal, rms=0.300565Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147357 Jy ! Component: 100 - total flux cleaned = 0.00220753 Jy ! Component: 150 - total flux cleaned = 0.00269631 Jy ! Component: 200 - total flux cleaned = 0.00306668 Jy ! Total flux subtracted in 200 components = 0.00306668 Jy ! Clean residual min=-0.008603 max=0.007741 Jy/beam ! Clean residual mean=0.000014 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 0.888995 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 105 components and 0.888995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300505Jy sigma=0.000779 ! Fit after self-cal, rms=0.300494Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.66 mas, bpa=-6.762 degrees ! Estimated noise=1985.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.66 at -6.762 degrees (North through East) ! Clean map min=-0.012537 max=0.49932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.222 mas, bmaj=5.97 mas, bpa=-6.171 degrees ! Estimated noise=2310.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.384806 Jy ! Component: 100 - total flux cleaned = 0.557493 Jy ! Component: 150 - total flux cleaned = 0.658383 Jy ! Component: 200 - total flux cleaned = 0.723443 Jy ! Total flux subtracted in 200 components = 0.723443 Jy ! Clean residual min=-0.024770 max=0.041896 Jy/beam ! Clean residual mean=-0.000018 rms=0.006808 Jy/beam ! Combined flux in latest and established models = 0.723443 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.723443 Jy ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.66 mas, bpa=-6.762 degrees ! Estimated noise=1985.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606065 Jy ! Component: 100 - total flux cleaned = 0.0956052 Jy ! Component: 150 - total flux cleaned = 0.117031 Jy ! Component: 200 - total flux cleaned = 0.131857 Jy ! Total flux subtracted in 200 components = 0.131857 Jy ! Clean residual min=-0.012327 max=0.019938 Jy/beam ! Clean residual mean=0.000006 rms=0.002900 Jy/beam ! Combined flux in latest and established models = 0.855299 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.855299 Jy ! Inverting map ! Added new window around map position (-3.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145608 Jy ! Component: 100 - total flux cleaned = 0.019516 Jy ! Component: 150 - total flux cleaned = 0.0217795 Jy ! Component: 200 - total flux cleaned = 0.0228813 Jy ! Total flux subtracted in 200 components = 0.0228813 Jy ! Clean residual min=-0.009499 max=0.008790 Jy/beam ! Clean residual mean=0.000005 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.878181 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.878181 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.92 mas, bmaj=15.35 mas, bpa=-3.066 degrees ! Estimated noise=2887.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251209 Jy ! Component: 100 - total flux cleaned = 0.00344332 Jy ! Component: 150 - total flux cleaned = 0.00442744 Jy ! Component: 200 - total flux cleaned = 0.00511811 Jy ! Total flux subtracted in 200 components = 0.00511811 Jy ! Clean residual min=-0.009202 max=0.009132 Jy/beam ! Clean residual mean=0.000014 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.883299 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624528 Jy ! Component: 100 - total flux cleaned = 0.00118992 Jy ! Component: 150 - total flux cleaned = 0.00169547 Jy ! Component: 200 - total flux cleaned = 0.00215417 Jy ! Total flux subtracted in 200 components = 0.00215417 Jy ! Clean residual min=-0.008489 max=0.008285 Jy/beam ! Clean residual mean=0.000015 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 0.885453 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 114 components and 0.885453 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.66 mas, bpa=-6.762 degrees ! Estimated noise=1985.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00402531 Jy ! Component: 100 - total flux cleaned = -0.00362687 Jy ! Component: 150 - total flux cleaned = -0.00292219 Jy ! Component: 200 - total flux cleaned = -0.00245885 Jy ! Total flux subtracted in 200 components = -0.00245885 Jy ! Clean residual min=-0.007639 max=0.006946 Jy/beam ! Clean residual mean=0.000006 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.882994 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 0.882994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300054Jy sigma=0.000768 ! Fit after self-cal, rms=0.299934Jy sigma=0.000768 wmodel J1037-2934_S_2015_01_23_pus_map.mod ! Writing 132 model components to file: J1037-2934_S_2015_01_23_pus_map.mod wobs J1037-2934_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2015_01_23_pus_uvs.fits wwins J1037-2934_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J1037-2934_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000871219 Jy ! Component: 100 - total flux cleaned = -0.000416337 Jy ! Component: 150 - total flux cleaned = 0.000886373 Jy ! Component: 200 - total flux cleaned = 0.00233584 Jy ! Component: 250 - total flux cleaned = 0.00352972 Jy ! Component: 300 - total flux cleaned = 0.00429668 Jy ! Component: 350 - total flux cleaned = 0.00494627 Jy ! Component: 400 - total flux cleaned = 0.00575608 Jy ! Component: 450 - total flux cleaned = 0.00689129 Jy ! Component: 500 - total flux cleaned = 0.00791204 Jy ! Component: 550 - total flux cleaned = 0.00874284 Jy ! Component: 600 - total flux cleaned = 0.00955393 Jy ! Component: 650 - total flux cleaned = 0.0104254 Jy ! Component: 700 - total flux cleaned = 0.0111236 Jy ! Component: 750 - total flux cleaned = 0.0118086 Jy ! Component: 800 - total flux cleaned = 0.0124822 Jy ! Component: 850 - total flux cleaned = 0.0134358 Jy ! Component: 900 - total flux cleaned = 0.0140111 Jy ! Component: 950 - total flux cleaned = 0.0147184 Jy ! Component: 1000 - total flux cleaned = 0.0149269 Jy ! Component: 1050 - total flux cleaned = 0.015338 Jy ! Component: 1100 - total flux cleaned = 0.0159449 Jy ! Component: 1150 - total flux cleaned = 0.0163415 Jy ! Component: 1200 - total flux cleaned = 0.0166678 Jy ! Component: 1250 - total flux cleaned = 0.0169897 Jy ! Component: 1300 - total flux cleaned = 0.0173071 Jy ! Component: 1350 - total flux cleaned = 0.0176818 Jy ! Component: 1400 - total flux cleaned = 0.0179282 Jy ! Component: 1450 - total flux cleaned = 0.0181096 Jy ! Component: 1500 - total flux cleaned = 0.0182891 Jy ! Component: 1550 - total flux cleaned = 0.0183482 Jy ! Component: 1600 - total flux cleaned = 0.0184658 Jy ! Component: 1650 - total flux cleaned = 0.018927 Jy ! Component: 1700 - total flux cleaned = 0.0190395 Jy ! Component: 1750 - total flux cleaned = 0.018927 Jy ! Component: 1800 - total flux cleaned = 0.0191499 Jy ! Component: 1850 - total flux cleaned = 0.0192045 Jy ! Component: 1900 - total flux cleaned = 0.019313 Jy ! Component: 1950 - total flux cleaned = 0.0194205 Jy ! Component: 2000 - total flux cleaned = 0.0194737 Jy ! Component: 2050 - total flux cleaned = 0.0194731 Jy ! Component: 2100 - total flux cleaned = 0.019525 Jy ! Component: 2150 - total flux cleaned = 0.0195761 Jy ! Component: 2200 - total flux cleaned = 0.0195253 Jy ! Component: 2250 - total flux cleaned = 0.0194253 Jy ! Component: 2300 - total flux cleaned = 0.0194255 Jy ! Component: 2350 - total flux cleaned = 0.0193272 Jy ! Component: 2400 - total flux cleaned = 0.0194733 Jy ! Component: 2450 - total flux cleaned = 0.0193288 Jy ! Component: 2500 - total flux cleaned = 0.0192811 Jy ! Component: 2550 - total flux cleaned = 0.0194705 Jy ! Component: 2600 - total flux cleaned = 0.0193759 Jy ! Component: 2650 - total flux cleaned = 0.0194218 Jy ! Component: 2700 - total flux cleaned = 0.0193303 Jy ! Component: 2750 - total flux cleaned = 0.0192848 Jy ! Component: 2800 - total flux cleaned = 0.0193745 Jy ! Component: 2850 - total flux cleaned = 0.0194189 Jy ! Component: 2900 - total flux cleaned = 0.0194628 Jy ! Component: 2950 - total flux cleaned = 0.0195503 Jy ! Component: 3000 - total flux cleaned = 0.0195072 Jy ! Component: 3050 - total flux cleaned = 0.0195944 Jy ! Component: 3100 - total flux cleaned = 0.0195947 Jy ! Component: 3150 - total flux cleaned = 0.0196796 Jy ! Component: 3200 - total flux cleaned = 0.0197221 Jy ! Component: 3250 - total flux cleaned = 0.0197227 Jy ! Component: 3300 - total flux cleaned = 0.019889 Jy ! Component: 3350 - total flux cleaned = 0.019848 Jy ! Component: 3400 - total flux cleaned = 0.0198482 Jy ! Component: 3450 - total flux cleaned = 0.0200111 Jy ! Component: 3500 - total flux cleaned = 0.0200111 Jy ! Component: 3550 - total flux cleaned = 0.0199309 Jy ! Component: 3600 - total flux cleaned = 0.0199309 Jy ! Component: 3650 - total flux cleaned = 0.0198919 Jy ! Component: 3700 - total flux cleaned = 0.0200494 Jy ! Component: 3750 - total flux cleaned = 0.0201274 Jy ! Component: 3800 - total flux cleaned = 0.0200885 Jy ! Component: 3850 - total flux cleaned = 0.0201269 Jy ! Component: 3900 - total flux cleaned = 0.0201654 Jy ! Component: 3950 - total flux cleaned = 0.0203566 Jy ! Component: 4000 - total flux cleaned = 0.0204329 Jy ! Component: 4050 - total flux cleaned = 0.0203948 Jy ! Total flux subtracted in 4096 components = 0.0204705 Jy ! Clean residual min=-0.002045 max=0.002233 Jy/beam ! Clean residual mean=0.000011 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.903465 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 408 components and 0.903464 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.66 at -6.762 degrees (North through East) ! Clean map min=-0.015272 max=0.49849 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.498485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000668729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.402457 0.402457 0.804914 1.60983 3.21966 6.43931 12.8786 25.7572 51.5145 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.498 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.66 at -6.762 degrees (North through East) ! Clean map min=-0.015272 max=0.49849 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:21:52 2017