! Started logfile: J1036-3744_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:51:14 2016 obs J1036-3744_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2014_06_09_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.318519 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.504906Jy sigma=0.004587 ! Fit after self-cal, rms=0.495448Jy sigma=0.004513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=29.45 mas, bpa=-9.23 degrees ! Estimated noise=3195.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.394559 Jy ! Component: 100 - total flux cleaned = 0.481107 Jy ! Total flux subtracted in 100 components = 0.481107 Jy ! Clean residual min=-0.021669 max=0.027653 Jy/beam ! Clean residual mean=0.000250 rms=0.007942 Jy/beam ! Combined flux in latest and established models = 0.481107 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.481107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120704Jy sigma=0.000989 ! Fit after self-cal, rms=0.120700Jy sigma=0.000989 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=30.57 mas, bpa=-8.964 degrees ! Estimated noise=2740.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337127 Jy ! Component: 100 - total flux cleaned = 0.0464489 Jy ! Component: 150 - total flux cleaned = 0.0508972 Jy ! Component: 200 - total flux cleaned = 0.0521959 Jy ! Total flux subtracted in 200 components = 0.0521959 Jy ! Clean residual min=-0.010878 max=0.014035 Jy/beam ! Clean residual mean=0.000056 rms=0.003624 Jy/beam ! Combined flux in latest and established models = 0.533303 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.533303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110244Jy sigma=0.000931 ! Fit after self-cal, rms=0.110193Jy sigma=0.000931 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* KP 1.10 ! LA 1.20 MK 1.00 NL 1.00* OV 0.99 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.01 ! LA 1.13 MK 0.99 NL 1.00* OV 1.00 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.00* KP 0.93 ! LA 0.88 MK 1.03 NL 1.00* OV 0.94 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.91 ! LA 0.87 MK 0.99 NL 1.00* OV 1.03 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.110193Jy sigma=0.000931 ! Fit after self-cal, rms=0.089962Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=30.48 mas, bpa=-8.965 degrees ! Estimated noise=2730.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319413 Jy ! Component: 100 - total flux cleaned = 0.00357019 Jy ! Component: 150 - total flux cleaned = 0.00393989 Jy ! Component: 200 - total flux cleaned = 0.00410638 Jy ! Total flux subtracted in 200 components = 0.00410638 Jy ! Clean residual min=-0.006015 max=0.005177 Jy/beam ! Clean residual mean=-0.000137 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.537409 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.537409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089826Jy sigma=0.000779 ! Fit after self-cal, rms=0.089821Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089821Jy sigma=0.000778 ! Fit after self-cal, rms=0.089690Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=30.45 mas, bpa=-8.966 degrees ! Estimated noise=2727.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132341 Jy ! Component: 100 - total flux cleaned = 0.00155551 Jy ! Component: 150 - total flux cleaned = 0.00172187 Jy ! Component: 200 - total flux cleaned = 0.00176281 Jy ! Total flux subtracted in 200 components = 0.00176281 Jy ! Clean residual min=-0.005615 max=0.004813 Jy/beam ! Clean residual mean=-0.000137 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.539172 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.539172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089646Jy sigma=0.000778 ! Fit after self-cal, rms=0.089644Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126888 Jy ! Component: 100 - total flux cleaned = 0.000239841 Jy ! Component: 150 - total flux cleaned = 0.000274797 Jy ! Component: 200 - total flux cleaned = 0.000309798 Jy ! Total flux subtracted in 200 components = 0.000309798 Jy ! Clean residual min=-0.005463 max=0.004768 Jy/beam ! Clean residual mean=-0.000136 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.539482 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.539482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089620Jy sigma=0.000777 ! Fit after self-cal, rms=0.089619Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089619Jy sigma=0.000777 ! Fit after self-cal, rms=0.089553Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=30.43 mas, bpa=-8.965 degrees ! Estimated noise=2725.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489137 Jy ! Component: 100 - total flux cleaned = 0.000632859 Jy ! Component: 150 - total flux cleaned = 0.000766606 Jy ! Component: 200 - total flux cleaned = 0.000891853 Jy ! Total flux subtracted in 200 components = 0.000891853 Jy ! Clean residual min=-0.005303 max=0.004672 Jy/beam ! Clean residual mean=-0.000132 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.540373 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.540373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089530Jy sigma=0.000777 ! Fit after self-cal, rms=0.089528Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95028e-05 Jy ! Component: 100 - total flux cleaned = 9.0149e-05 Jy ! Component: 150 - total flux cleaned = 0.000148697 Jy ! Component: 200 - total flux cleaned = 0.000206668 Jy ! Total flux subtracted in 200 components = 0.000206668 Jy ! Clean residual min=-0.005177 max=0.004619 Jy/beam ! Clean residual mean=-0.000131 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.54058 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.54058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089511Jy sigma=0.000777 ! Fit after self-cal, rms=0.089510Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089510Jy sigma=0.000777 ! Fit after self-cal, rms=0.089465Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.65 mas, bmaj=37.51 mas, bpa=4.975 degrees ! Estimated noise=3386.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132964 Jy ! Component: 100 - total flux cleaned = 0.0013934 Jy ! Component: 150 - total flux cleaned = 0.00145082 Jy ! Component: 200 - total flux cleaned = 0.00147862 Jy ! Total flux subtracted in 200 components = 0.00147862 Jy ! Clean residual min=-0.004511 max=0.003731 Jy/beam ! Clean residual mean=-0.000205 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.542058 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.542058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089464Jy sigma=0.000777 ! Fit after self-cal, rms=0.089462Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.48018e-05 Jy ! Component: 100 - total flux cleaned = 6.99492e-05 Jy ! Component: 150 - total flux cleaned = 0.000116921 Jy ! Component: 200 - total flux cleaned = 0.000138711 Jy ! Total flux subtracted in 200 components = 0.000138711 Jy ! Clean residual min=-0.004577 max=0.003716 Jy/beam ! Clean residual mean=-0.000204 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.542197 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.542197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089462Jy sigma=0.000777 ! Fit after self-cal, rms=0.089459Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=30.42 mas, bpa=-8.965 degrees ! Estimated noise=2725.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.432 x 30.42 at -8.965 degrees (North through East) ! Clean map min=-0.0049175 max=0.50462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089459Jy sigma=0.000777 ! Fit after self-cal, rms=0.079627Jy sigma=0.000680 ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=30.37 mas, bpa=-8.953 degrees ! Estimated noise=2727.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068103 Jy ! Component: 100 - total flux cleaned = 0.000969788 Jy ! Component: 150 - total flux cleaned = 0.00118418 Jy ! Component: 200 - total flux cleaned = 0.00127092 Jy ! Total flux subtracted in 200 components = 0.00127092 Jy ! Clean residual min=-0.004880 max=0.004287 Jy/beam ! Clean residual mean=-0.000132 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.543468 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.543468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079591Jy sigma=0.000680 ! Fit after self-cal, rms=0.079593Jy sigma=0.000680 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.34091e-06 Jy ! Component: 100 - total flux cleaned = 0.000125889 Jy ! Component: 150 - total flux cleaned = 0.000202641 Jy ! Component: 200 - total flux cleaned = 0.000227588 Jy ! Total flux subtracted in 200 components = 0.000227588 Jy ! Clean residual min=-0.004860 max=0.004274 Jy/beam ! Clean residual mean=-0.000131 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.543696 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 94 components and 0.543696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079575Jy sigma=0.000680 ! Fit after self-cal, rms=0.079577Jy sigma=0.000680 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079577Jy sigma=0.000680 ! Fit after self-cal, rms=0.079538Jy sigma=0.000680 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=29.41 mas, bpa=-9.234 degrees ! Estimated noise=3146.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.388536 Jy ! Component: 100 - total flux cleaned = 0.47398 Jy ! Component: 150 - total flux cleaned = 0.503997 Jy ! Component: 200 - total flux cleaned = 0.518544 Jy ! Total flux subtracted in 200 components = 0.518544 Jy ! Clean residual min=-0.008393 max=0.007553 Jy/beam ! Clean residual mean=-0.000036 rms=0.002473 Jy/beam ! Combined flux in latest and established models = 0.518544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.518544 Jy ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=30.36 mas, bpa=-8.952 degrees ! Estimated noise=2726.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947894 Jy ! Component: 100 - total flux cleaned = 0.0151041 Jy ! Component: 150 - total flux cleaned = 0.0187146 Jy ! Component: 200 - total flux cleaned = 0.0210642 Jy ! Total flux subtracted in 200 components = 0.0210642 Jy ! Clean residual min=-0.005611 max=0.004636 Jy/beam ! Clean residual mean=-0.000147 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.539608 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 58 components and 0.539608 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.65 mas, bmaj=37.52 mas, bpa=5.048 degrees ! Estimated noise=3384.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273854 Jy ! Component: 100 - total flux cleaned = 0.00380639 Jy ! Component: 150 - total flux cleaned = 0.00401658 Jy ! Component: 200 - total flux cleaned = 0.00416057 Jy ! Total flux subtracted in 200 components = 0.00416057 Jy ! Clean residual min=-0.004534 max=0.004135 Jy/beam ! Clean residual mean=-0.000218 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.543768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177795 Jy ! Component: 100 - total flux cleaned = 0.000299126 Jy ! Component: 150 - total flux cleaned = 0.000449096 Jy ! Component: 200 - total flux cleaned = 0.000551 Jy ! Total flux subtracted in 200 components = 0.000551 Jy ! Clean residual min=-0.004502 max=0.003937 Jy/beam ! Clean residual mean=-0.000215 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.544319 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.544319 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=30.36 mas, bpa=-8.952 degrees ! Estimated noise=2726.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000606772 Jy ! Component: 100 - total flux cleaned = -0.000498798 Jy ! Component: 150 - total flux cleaned = -0.000407223 Jy ! Component: 200 - total flux cleaned = -0.000327418 Jy ! Total flux subtracted in 200 components = -0.000327418 Jy ! Clean residual min=-0.005145 max=0.004622 Jy/beam ! Clean residual mean=-0.000131 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.543992 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.543992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079607Jy sigma=0.000680 ! Fit after self-cal, rms=0.079611Jy sigma=0.000680 wmodel J1036-3744_S_2014_06_09_pus_map.mod ! Writing 82 model components to file: J1036-3744_S_2014_06_09_pus_map.mod wobs J1036-3744_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2014_06_09_pus_uvs.fits wwins J1036-3744_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J1036-3744_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202389 Jy ! Component: 100 - total flux cleaned = -0.00318064 Jy ! Component: 150 - total flux cleaned = -0.00435671 Jy ! Component: 200 - total flux cleaned = -0.00524081 Jy ! Component: 250 - total flux cleaned = -0.00623039 Jy ! Component: 300 - total flux cleaned = -0.00715429 Jy ! Component: 350 - total flux cleaned = -0.00801949 Jy ! Component: 400 - total flux cleaned = -0.00878466 Jy ! Component: 450 - total flux cleaned = -0.0095552 Jy ! Component: 500 - total flux cleaned = -0.0102011 Jy ! Component: 550 - total flux cleaned = -0.0108167 Jy ! Component: 600 - total flux cleaned = -0.011327 Jy ! Component: 650 - total flux cleaned = -0.0117403 Jy ! Component: 700 - total flux cleaned = -0.0119574 Jy ! Component: 750 - total flux cleaned = -0.0121327 Jy ! Component: 800 - total flux cleaned = -0.0122018 Jy ! Component: 850 - total flux cleaned = -0.0122357 Jy ! Component: 900 - total flux cleaned = -0.0122044 Jy ! Component: 950 - total flux cleaned = -0.0120785 Jy ! Component: 1000 - total flux cleaned = -0.0119546 Jy ! Component: 1050 - total flux cleaned = -0.0118327 Jy ! Component: 1100 - total flux cleaned = -0.0118024 Jy ! Component: 1150 - total flux cleaned = -0.0117727 Jy ! Component: 1200 - total flux cleaned = -0.0118307 Jy ! Component: 1250 - total flux cleaned = -0.011859 Jy ! Component: 1300 - total flux cleaned = -0.0119166 Jy ! Component: 1350 - total flux cleaned = -0.0119167 Jy ! Component: 1400 - total flux cleaned = -0.011945 Jy ! Component: 1450 - total flux cleaned = -0.0119167 Jy ! Component: 1500 - total flux cleaned = -0.0119168 Jy ! Component: 1550 - total flux cleaned = -0.0119446 Jy ! Component: 1600 - total flux cleaned = -0.011917 Jy ! Component: 1650 - total flux cleaned = -0.0119728 Jy ! Component: 1700 - total flux cleaned = -0.0119451 Jy ! Component: 1750 - total flux cleaned = -0.012084 Jy ! Component: 1800 - total flux cleaned = -0.0123084 Jy ! Component: 1850 - total flux cleaned = -0.0124786 Jy ! Component: 1900 - total flux cleaned = -0.0126509 Jy ! Component: 1950 - total flux cleaned = -0.0128838 Jy ! Component: 2000 - total flux cleaned = -0.0130019 Jy ! Component: 2050 - total flux cleaned = -0.013182 Jy ! Component: 2100 - total flux cleaned = -0.0133656 Jy ! Component: 2150 - total flux cleaned = -0.0135529 Jy ! Component: 2200 - total flux cleaned = -0.0137126 Jy ! Component: 2250 - total flux cleaned = -0.0138748 Jy ! Component: 2300 - total flux cleaned = -0.0140402 Jy ! Component: 2350 - total flux cleaned = -0.0141756 Jy ! Component: 2400 - total flux cleaned = -0.0143486 Jy ! Component: 2450 - total flux cleaned = -0.0145252 Jy ! Component: 2500 - total flux cleaned = -0.0146345 Jy ! Component: 2550 - total flux cleaned = -0.0147089 Jy ! Component: 2600 - total flux cleaned = -0.0148233 Jy ! Component: 2650 - total flux cleaned = -0.014942 Jy ! Component: 2700 - total flux cleaned = -0.0150238 Jy ! Component: 2750 - total flux cleaned = -0.0151073 Jy ! Component: 2800 - total flux cleaned = -0.0152366 Jy ! Component: 2850 - total flux cleaned = -0.0153266 Jy ! Component: 2900 - total flux cleaned = -0.0154176 Jy ! Component: 2950 - total flux cleaned = -0.0155597 Jy ! Component: 3000 - total flux cleaned = -0.0156586 Jy ! Component: 3050 - total flux cleaned = -0.0157596 Jy ! Component: 3100 - total flux cleaned = -0.0158636 Jy ! Component: 3150 - total flux cleaned = -0.0159705 Jy ! Component: 3200 - total flux cleaned = -0.0161364 Jy ! Component: 3250 - total flux cleaned = -0.0162516 Jy ! Component: 3300 - total flux cleaned = -0.0163123 Jy ! Component: 3350 - total flux cleaned = -0.0164343 Jy ! Component: 3400 - total flux cleaned = -0.0166222 Jy ! Component: 3450 - total flux cleaned = -0.0167524 Jy ! Component: 3500 - total flux cleaned = -0.0168182 Jy ! Component: 3550 - total flux cleaned = -0.0170259 Jy ! Component: 3600 - total flux cleaned = -0.0171703 Jy ! Component: 3650 - total flux cleaned = -0.0173185 Jy ! Component: 3700 - total flux cleaned = -0.0174713 Jy ! Component: 3750 - total flux cleaned = -0.0175488 Jy ! Component: 3800 - total flux cleaned = -0.0176319 Jy ! Component: 3850 - total flux cleaned = -0.0176326 Jy ! Component: 3900 - total flux cleaned = -0.0176305 Jy ! Component: 3950 - total flux cleaned = -0.0177182 Jy ! Component: 4000 - total flux cleaned = -0.0177164 Jy ! Component: 4050 - total flux cleaned = -0.0178124 Jy ! Total flux subtracted in 4096 components = -0.0178115 Jy ! Clean residual min=-0.005316 max=0.005216 Jy/beam ! Clean residual mean=0.000174 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.52618 Jy keep ! Adding 197 model components to the UV plane model. ! The established model now contains 279 components and 0.52618 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 30.36 at -8.952 degrees (North through East) ! Clean map min=-0.014188 max=0.49807 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.498066 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00171735 device "J1036-3744_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1036-3744_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03441 1.03441 2.06883 4.13765 8.27531 16.5506 33.1012 66.2025 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.498 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 30.36 at -8.952 degrees (North through East) ! Clean map min=-0.014188 max=0.49807 Jy/beam quit ! Quitting program ! Log file J1036-3744_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:51:19 2016