! Started logfile: J1033+6051_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:24:03 2017 obs J1033+6051_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1033+6051_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1033+6051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+6051_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.792814Jy sigma=0.011939 ! Fit after self-cal, rms=0.762884Jy sigma=0.011491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=5.7 mas, bpa=64.87 degrees ! Estimated noise=1236.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172098 Jy ! Component: 100 - total flux cleaned = 0.214341 Jy ! Total flux subtracted in 100 components = 0.214341 Jy ! Clean residual min=-0.012730 max=0.018308 Jy/beam ! Clean residual mean=-0.000120 rms=0.003750 Jy/beam ! Combined flux in latest and established models = 0.214341 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.214341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090706Jy sigma=0.001198 ! Fit after self-cal, rms=0.090561Jy sigma=0.001198 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.028 mas, bpa=62.49 degrees ! Estimated noise=677.536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332924 Jy ! Component: 100 - total flux cleaned = 0.0496315 Jy ! Component: 150 - total flux cleaned = 0.0594768 Jy ! Component: 200 - total flux cleaned = 0.0654931 Jy ! Total flux subtracted in 200 components = 0.0654931 Jy ! Clean residual min=-0.010470 max=0.014555 Jy/beam ! Clean residual mean=-0.000151 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.279834 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 28 components and 0.279834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076192Jy sigma=0.001031 ! Fit after self-cal, rms=0.075951Jy sigma=0.001028 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.99 ! MK 0.98 NL 0.96 OV 0.96 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.96 ! MK 0.99 NL 1.01 OV 0.98 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.80 ! MK 1.00 NL 0.98 OV 0.90 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.86 ! MK 0.99 NL 1.06 OV 0.96 PT 0.98 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.075951Jy sigma=0.001028 ! Fit after self-cal, rms=0.066666Jy sigma=0.000933 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=7.012 mas, bpa=62.23 degrees ! Estimated noise=670.577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906634 Jy ! Component: 100 - total flux cleaned = 0.0105766 Jy ! Component: 150 - total flux cleaned = 0.0100887 Jy ! Component: 200 - total flux cleaned = 0.00988396 Jy ! Total flux subtracted in 200 components = 0.00988396 Jy ! Clean residual min=-0.005136 max=0.004843 Jy/beam ! Clean residual mean=-0.000007 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.289718 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.289718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065604Jy sigma=0.000911 ! Fit after self-cal, rms=0.065044Jy sigma=0.000909 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065044Jy sigma=0.000909 ! Fit after self-cal, rms=0.064527Jy sigma=0.000902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=6.966 mas, bpa=62.76 degrees ! Estimated noise=668.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149452 Jy ! Component: 100 - total flux cleaned = 0.00242044 Jy ! Component: 150 - total flux cleaned = 0.00273478 Jy ! Component: 200 - total flux cleaned = 0.00290502 Jy ! Total flux subtracted in 200 components = 0.00290502 Jy ! Clean residual min=-0.002967 max=0.003302 Jy/beam ! Clean residual mean=-0.000017 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.292623 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.292623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064404Jy sigma=0.000900 ! Fit after self-cal, rms=0.064387Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288768 Jy ! Component: 100 - total flux cleaned = 0.00420818 Jy ! Component: 150 - total flux cleaned = 0.00456975 Jy ! Component: 200 - total flux cleaned = 0.00493707 Jy ! Total flux subtracted in 200 components = 0.00493707 Jy ! Clean residual min=-0.002667 max=0.002337 Jy/beam ! Clean residual mean=-0.000008 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.29756 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 0.29756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064240Jy sigma=0.000897 ! Fit after self-cal, rms=0.064216Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064216Jy sigma=0.000897 ! Fit after self-cal, rms=0.064161Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=6.961 mas, bpa=62.83 degrees ! Estimated noise=668.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685473 Jy ! Component: 100 - total flux cleaned = 0.00110805 Jy ! Component: 150 - total flux cleaned = 0.00148469 Jy ! Component: 200 - total flux cleaned = 0.00176492 Jy ! Total flux subtracted in 200 components = 0.00176492 Jy ! Clean residual min=-0.002682 max=0.002244 Jy/beam ! Clean residual mean=-0.000009 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.299325 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.299325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064117Jy sigma=0.000897 ! Fit after self-cal, rms=0.064115Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153153 Jy ! Component: 100 - total flux cleaned = 0.000414098 Jy ! Component: 150 - total flux cleaned = 0.000649542 Jy ! Component: 200 - total flux cleaned = 0.000794995 Jy ! Total flux subtracted in 200 components = 0.000794995 Jy ! Clean residual min=-0.002620 max=0.002224 Jy/beam ! Clean residual mean=-0.000007 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.30012 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 120 components and 0.30012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064091Jy sigma=0.000896 ! Fit after self-cal, rms=0.064088Jy sigma=0.000896 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064088Jy sigma=0.000896 ! Fit after self-cal, rms=0.064091Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=11.57 mas, bpa=61.26 degrees ! Estimated noise=785.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865187 Jy ! Component: 100 - total flux cleaned = 0.00145892 Jy ! Component: 150 - total flux cleaned = 0.00173872 Jy ! Component: 200 - total flux cleaned = 0.00185256 Jy ! Total flux subtracted in 200 components = 0.00185256 Jy ! Clean residual min=-0.002863 max=0.002650 Jy/beam ! Clean residual mean=-0.000013 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.301972 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 152 components and 0.301972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064084Jy sigma=0.000896 ! Fit after self-cal, rms=0.064081Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436378 Jy ! Component: 100 - total flux cleaned = 0.000552809 Jy ! Component: 150 - total flux cleaned = 0.000613911 Jy ! Component: 200 - total flux cleaned = 0.000656516 Jy ! Total flux subtracted in 200 components = 0.000656516 Jy ! Clean residual min=-0.002804 max=0.002546 Jy/beam ! Clean residual mean=-0.000011 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.302629 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 0.302629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064077Jy sigma=0.000896 ! Fit after self-cal, rms=0.064076Jy sigma=0.000896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=6.956 mas, bpa=62.87 degrees ! Estimated noise=668.425 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 6.956 at 62.87 degrees (North through East) ! Clean map min=-0.0025726 max=0.22993 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=5.609 mas, bpa=65.21 degrees ! Estimated noise=1229.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171048 Jy ! Component: 100 - total flux cleaned = 0.215647 Jy ! Component: 150 - total flux cleaned = 0.238701 Jy ! Component: 200 - total flux cleaned = 0.252876 Jy ! Total flux subtracted in 200 components = 0.252876 Jy ! Clean residual min=-0.006577 max=0.007660 Jy/beam ! Clean residual mean=-0.000050 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.252876 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.252876 Jy ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=6.956 mas, bpa=62.87 degrees ! Estimated noise=668.425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142248 Jy ! Component: 100 - total flux cleaned = 0.0223772 Jy ! Component: 150 - total flux cleaned = 0.027751 Jy ! Component: 200 - total flux cleaned = 0.0316935 Jy ! Total flux subtracted in 200 components = 0.0316935 Jy ! Clean residual min=-0.003546 max=0.002807 Jy/beam ! Clean residual mean=-0.000047 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.28457 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 54 components and 0.28457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=11.57 mas, bpa=61.26 degrees ! Estimated noise=785.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042404 Jy ! Component: 100 - total flux cleaned = 0.0070217 Jy ! Component: 150 - total flux cleaned = 0.00910683 Jy ! Component: 200 - total flux cleaned = 0.0107698 Jy ! Total flux subtracted in 200 components = 0.0107698 Jy ! Clean residual min=-0.003517 max=0.002801 Jy/beam ! Clean residual mean=-0.000045 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.295339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137831 Jy ! Component: 100 - total flux cleaned = 0.00252983 Jy ! Component: 150 - total flux cleaned = 0.00349334 Jy ! Component: 200 - total flux cleaned = 0.00430242 Jy ! Total flux subtracted in 200 components = 0.00430242 Jy ! Clean residual min=-0.003127 max=0.002661 Jy/beam ! Clean residual mean=-0.000025 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.299642 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 131 components and 0.299642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=6.956 mas, bpa=62.87 degrees ! Estimated noise=668.425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277024 Jy ! Component: 100 - total flux cleaned = 0.000497714 Jy ! Component: 150 - total flux cleaned = 0.000770167 Jy ! Component: 200 - total flux cleaned = 0.000946685 Jy ! Total flux subtracted in 200 components = 0.000946685 Jy ! Clean residual min=-0.002600 max=0.002369 Jy/beam ! Clean residual mean=-0.000009 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.300588 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.300589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064124Jy sigma=0.000896 ! Fit after self-cal, rms=0.064108Jy sigma=0.000896 wmodel J1033+6051_S_2014_01_04_pus_map.mod ! Writing 157 model components to file: J1033+6051_S_2014_01_04_pus_map.mod wobs J1033+6051_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1033+6051_S_2014_01_04_pus_uvs.fits wwins J1033+6051_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1033+6051_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629777 Jy ! Component: 100 - total flux cleaned = -0.000930489 Jy ! Component: 150 - total flux cleaned = -0.00114321 Jy ! Component: 200 - total flux cleaned = -0.0011766 Jy ! Component: 250 - total flux cleaned = -0.00120861 Jy ! Component: 300 - total flux cleaned = -0.00120864 Jy ! Component: 350 - total flux cleaned = -0.00112194 Jy ! Component: 400 - total flux cleaned = -0.00106681 Jy ! Component: 450 - total flux cleaned = -0.000986531 Jy ! Component: 500 - total flux cleaned = -0.000934856 Jy ! Component: 550 - total flux cleaned = -0.000884294 Jy ! Component: 600 - total flux cleaned = -0.000835391 Jy ! Component: 650 - total flux cleaned = -0.000811576 Jy ! Component: 700 - total flux cleaned = -0.000765743 Jy ! Component: 750 - total flux cleaned = -0.000744092 Jy ! Component: 800 - total flux cleaned = -0.000744435 Jy ! Component: 850 - total flux cleaned = -0.000785918 Jy ! Component: 900 - total flux cleaned = -0.000765141 Jy ! Component: 950 - total flux cleaned = -0.000725136 Jy ! Component: 1000 - total flux cleaned = -0.000803648 Jy ! Component: 1050 - total flux cleaned = -0.000841753 Jy ! Component: 1100 - total flux cleaned = -0.000897597 Jy ! Component: 1150 - total flux cleaned = -0.000952202 Jy ! Component: 1200 - total flux cleaned = -0.000970298 Jy ! Component: 1250 - total flux cleaned = -0.00104103 Jy ! Component: 1300 - total flux cleaned = -0.00114532 Jy ! Component: 1350 - total flux cleaned = -0.00116262 Jy ! Component: 1400 - total flux cleaned = -0.001213 Jy ! Component: 1450 - total flux cleaned = -0.00122958 Jy ! Component: 1500 - total flux cleaned = -0.00124574 Jy ! Component: 1550 - total flux cleaned = -0.00126186 Jy ! Component: 1600 - total flux cleaned = -0.00130885 Jy ! Component: 1650 - total flux cleaned = -0.00132435 Jy ! Component: 1700 - total flux cleaned = -0.00135474 Jy ! Component: 1750 - total flux cleaned = -0.00136969 Jy ! Component: 1800 - total flux cleaned = -0.00136985 Jy ! Component: 1850 - total flux cleaned = -0.00138459 Jy ! Component: 1900 - total flux cleaned = -0.00141374 Jy ! Component: 1950 - total flux cleaned = -0.00144236 Jy ! Component: 2000 - total flux cleaned = -0.00145651 Jy ! Component: 2050 - total flux cleaned = -0.0014706 Jy ! Component: 2100 - total flux cleaned = -0.00148455 Jy ! Component: 2150 - total flux cleaned = -0.00151189 Jy ! Component: 2200 - total flux cleaned = -0.00149833 Jy ! Component: 2250 - total flux cleaned = -0.00149833 Jy ! Component: 2300 - total flux cleaned = -0.00147206 Jy ! Component: 2350 - total flux cleaned = -0.00149822 Jy ! Component: 2400 - total flux cleaned = -0.0014852 Jy ! Component: 2450 - total flux cleaned = -0.00148504 Jy ! Component: 2500 - total flux cleaned = -0.00147229 Jy ! Component: 2550 - total flux cleaned = -0.00143462 Jy ! Component: 2600 - total flux cleaned = -0.00144715 Jy ! Component: 2650 - total flux cleaned = -0.00144721 Jy ! Component: 2700 - total flux cleaned = -0.00145956 Jy ! Component: 2750 - total flux cleaned = -0.0014717 Jy ! Component: 2800 - total flux cleaned = -0.00148375 Jy ! Component: 2850 - total flux cleaned = -0.00150745 Jy ! Component: 2900 - total flux cleaned = -0.00151915 Jy ! Component: 2950 - total flux cleaned = -0.0015075 Jy ! Component: 3000 - total flux cleaned = -0.0015307 Jy ! Component: 3050 - total flux cleaned = -0.00153073 Jy ! Component: 3100 - total flux cleaned = -0.00153079 Jy ! Component: 3150 - total flux cleaned = -0.00154219 Jy ! Component: 3200 - total flux cleaned = -0.00156469 Jy ! Component: 3250 - total flux cleaned = -0.00155355 Jy ! Component: 3300 - total flux cleaned = -0.00158681 Jy ! Component: 3350 - total flux cleaned = -0.00160869 Jy ! Component: 3400 - total flux cleaned = -0.00159777 Jy ! Component: 3450 - total flux cleaned = -0.00158694 Jy ! Component: 3500 - total flux cleaned = -0.00158706 Jy ! Component: 3550 - total flux cleaned = -0.00159789 Jy ! Component: 3600 - total flux cleaned = -0.00161915 Jy ! Component: 3650 - total flux cleaned = -0.00160863 Jy ! Component: 3700 - total flux cleaned = -0.00160864 Jy ! Component: 3750 - total flux cleaned = -0.00160875 Jy ! Component: 3800 - total flux cleaned = -0.00162955 Jy ! Component: 3850 - total flux cleaned = -0.00163984 Jy ! Component: 3900 - total flux cleaned = -0.00160899 Jy ! Component: 3950 - total flux cleaned = -0.00161923 Jy ! Component: 4000 - total flux cleaned = -0.00161927 Jy ! Component: 4050 - total flux cleaned = -0.00164973 Jy ! Total flux subtracted in 4096 components = -0.0016598 Jy ! Clean residual min=-0.000665 max=0.000730 Jy/beam ! Clean residual mean=-0.000003 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.298929 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 399 components and 0.298928 Jy ![Exited script file: muppet] wmap "J1033+6051_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 6.956 at 62.87 degrees (North through East) ! Clean map min=-0.0012473 max=0.23134 Jy/beam ! Writing clean map to FITS file: J1033+6051_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.231337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.209009 0.209009 0.418019 0.836037 1.67207 3.34415 6.6883 13.3766 26.7532 53.5064 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.231 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 6.956 at 62.87 degrees (North through East) ! Clean map min=-0.0012473 max=0.23134 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+6051_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:08 2017