! Started logfile: J1033+4116_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:50:14 2017 obs J1033+4116_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1033+4116_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1033+4116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+4116_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.463815Jy sigma=0.005314 ! Fit after self-cal, rms=0.452489Jy sigma=0.005169 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.44 mas, bmaj=13.09 mas, bpa=88.73 degrees ! Estimated noise=1963.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.44869 Jy ! Component: 100 - total flux cleaned = 0.546566 Jy ! Total flux subtracted in 100 components = 0.546566 Jy ! Clean residual min=-0.030775 max=0.049214 Jy/beam ! Clean residual mean=-0.000154 rms=0.011117 Jy/beam ! Combined flux in latest and established models = 0.546566 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.546566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137425Jy sigma=0.001546 ! Fit after self-cal, rms=0.137424Jy sigma=0.001546 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.242 mas, bmaj=13.03 mas, bpa=89.27 degrees ! Estimated noise=1673.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165431 Jy ! Component: 100 - total flux cleaned = 0.0165716 Jy ! Component: 150 - total flux cleaned = 0.017092 Jy ! Component: 200 - total flux cleaned = 0.0174962 Jy ! Total flux subtracted in 200 components = 0.0174962 Jy ! Clean residual min=-0.033470 max=0.047360 Jy/beam ! Clean residual mean=-0.000297 rms=0.012187 Jy/beam ! Combined flux in latest and established models = 0.564062 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.564062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131734Jy sigma=0.001451 ! Fit after self-cal, rms=0.131666Jy sigma=0.001450 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.01 ! LA 1.41 MK 1.00* NL 0.98 OV 0.92 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.01 KP 0.93 ! LA 1.40 MK 1.00* NL 0.98 OV 0.94 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00 KP 0.81 ! LA 1.11 MK 1.00* NL 1.34 OV 0.88 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 0.94 KP 0.74 ! LA 1.22 MK 1.00* NL 1.17 OV 0.91 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.131666Jy sigma=0.001450 ! Fit after self-cal, rms=0.083554Jy sigma=0.000853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.147 mas, bmaj=13.09 mas, bpa=88.86 degrees ! Estimated noise=1658.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777932 Jy ! Component: 100 - total flux cleaned = 0.00840445 Jy ! Component: 150 - total flux cleaned = 0.00783049 Jy ! Component: 200 - total flux cleaned = 0.00746387 Jy ! Total flux subtracted in 200 components = 0.00746387 Jy ! Clean residual min=-0.010479 max=0.012085 Jy/beam ! Clean residual mean=0.000060 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 0.571526 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.571526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082605Jy sigma=0.000842 ! Fit after self-cal, rms=0.082898Jy sigma=0.000841 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082898Jy sigma=0.000841 ! Fit after self-cal, rms=0.082908Jy sigma=0.000840 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.133 mas, bmaj=13.08 mas, bpa=88.87 degrees ! Estimated noise=1658.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279654 Jy ! Component: 100 - total flux cleaned = 0.00239959 Jy ! Component: 150 - total flux cleaned = 0.00222441 Jy ! Component: 200 - total flux cleaned = 0.00198341 Jy ! Total flux subtracted in 200 components = 0.00198341 Jy ! Clean residual min=-0.010391 max=0.011833 Jy/beam ! Clean residual mean=0.000066 rms=0.002695 Jy/beam ! Combined flux in latest and established models = 0.573509 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.573509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082593Jy sigma=0.000837 ! Fit after self-cal, rms=0.082647Jy sigma=0.000837 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100629 Jy ! Component: 100 - total flux cleaned = 0.0146466 Jy ! Component: 150 - total flux cleaned = 0.0148305 Jy ! Component: 200 - total flux cleaned = 0.0145552 Jy ! Total flux subtracted in 200 components = 0.0145552 Jy ! Clean residual min=-0.007433 max=0.007487 Jy/beam ! Clean residual mean=0.000057 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.588064 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 0.588064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081155Jy sigma=0.000820 ! Fit after self-cal, rms=0.081050Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081050Jy sigma=0.000819 ! Fit after self-cal, rms=0.080851Jy sigma=0.000818 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.127 mas, bmaj=13.05 mas, bpa=88.88 degrees ! Estimated noise=1655.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414836 Jy ! Component: 100 - total flux cleaned = 0.00511092 Jy ! Component: 150 - total flux cleaned = 0.00546038 Jy ! Component: 200 - total flux cleaned = 0.00560866 Jy ! Total flux subtracted in 200 components = 0.00560866 Jy ! Clean residual min=-0.005969 max=0.005581 Jy/beam ! Clean residual mean=0.000051 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.593673 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.593673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080528Jy sigma=0.000814 ! Fit after self-cal, rms=0.080478Jy sigma=0.000814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010791 Jy ! Component: 100 - total flux cleaned = 0.00183114 Jy ! Component: 150 - total flux cleaned = 0.0023781 Jy ! Component: 200 - total flux cleaned = 0.00265238 Jy ! Total flux subtracted in 200 components = 0.00265238 Jy ! Clean residual min=-0.005411 max=0.005066 Jy/beam ! Clean residual mean=0.000048 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.596326 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.596326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080368Jy sigma=0.000813 ! Fit after self-cal, rms=0.080340Jy sigma=0.000813 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080340Jy sigma=0.000813 ! Fit after self-cal, rms=0.080263Jy sigma=0.000812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.964 mas, bmaj=13.15 mas, bpa=85.96 degrees ! Estimated noise=1769.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254989 Jy ! Component: 100 - total flux cleaned = 0.0041087 Jy ! Component: 150 - total flux cleaned = 0.00498294 Jy ! Component: 200 - total flux cleaned = 0.00542507 Jy ! Total flux subtracted in 200 components = 0.00542507 Jy ! Clean residual min=-0.004723 max=0.004194 Jy/beam ! Clean residual mean=0.000055 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.601751 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 166 components and 0.601751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080196Jy sigma=0.000812 ! Fit after self-cal, rms=0.080165Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895457 Jy ! Component: 100 - total flux cleaned = 0.0014194 Jy ! Component: 150 - total flux cleaned = 0.00188558 Jy ! Component: 200 - total flux cleaned = 0.0020965 Jy ! Total flux subtracted in 200 components = 0.0020965 Jy ! Clean residual min=-0.004539 max=0.004139 Jy/beam ! Clean residual mean=0.000051 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.603847 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 187 components and 0.603847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080122Jy sigma=0.000811 ! Fit after self-cal, rms=0.080105Jy sigma=0.000811 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.123 mas, bmaj=13.04 mas, bpa=88.9 degrees ! Estimated noise=1655.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.123 x 13.04 at 88.9 degrees (North through East) ! Clean map min=-0.0046741 max=0.57009 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080105Jy sigma=0.000811 ! Fit after self-cal, rms=0.072647Jy sigma=0.000695 ! Inverting map and beam ! Estimated beam: bmin=6.122 mas, bmaj=13.03 mas, bpa=88.9 degrees ! Estimated noise=1656.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139436 Jy ! Component: 100 - total flux cleaned = 0.00169311 Jy ! Component: 150 - total flux cleaned = 0.00182803 Jy ! Component: 200 - total flux cleaned = 0.0017699 Jy ! Total flux subtracted in 200 components = 0.0017699 Jy ! Clean residual min=-0.004767 max=0.003974 Jy/beam ! Clean residual mean=0.000033 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.605617 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 209 components and 0.605617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072576Jy sigma=0.000694 ! Fit after self-cal, rms=0.072554Jy sigma=0.000694 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409959 Jy ! Component: 100 - total flux cleaned = 0.00066919 Jy ! Component: 150 - total flux cleaned = 0.000694473 Jy ! Component: 200 - total flux cleaned = 0.000716149 Jy ! Total flux subtracted in 200 components = 0.000716149 Jy ! Clean residual min=-0.004715 max=0.003882 Jy/beam ! Clean residual mean=0.000033 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.606333 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 229 components and 0.606333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072519Jy sigma=0.000694 ! Fit after self-cal, rms=0.072506Jy sigma=0.000694 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072506Jy sigma=0.000694 ! Fit after self-cal, rms=0.072505Jy sigma=0.000694 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.289 mas, bmaj=13.19 mas, bpa=88.57 degrees ! Estimated noise=1918.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438297 Jy ! Component: 100 - total flux cleaned = 0.534133 Jy ! Component: 150 - total flux cleaned = 0.562277 Jy ! Component: 200 - total flux cleaned = 0.575165 Jy ! Total flux subtracted in 200 components = 0.575165 Jy ! Clean residual min=-0.009826 max=0.010371 Jy/beam ! Clean residual mean=0.000030 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 0.575165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.575165 Jy ! Inverting map and beam ! Estimated beam: bmin=6.119 mas, bmaj=13.03 mas, bpa=88.91 degrees ! Estimated noise=1656.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155083 Jy ! Component: 100 - total flux cleaned = 0.0210026 Jy ! Component: 150 - total flux cleaned = 0.0235452 Jy ! Component: 200 - total flux cleaned = 0.0247818 Jy ! Total flux subtracted in 200 components = 0.0247818 Jy ! Clean residual min=-0.006959 max=0.006706 Jy/beam ! Clean residual mean=0.000050 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 0.599946 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 61 components and 0.599946 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.957 mas, bmaj=13.13 mas, bpa=85.98 degrees ! Estimated noise=1772.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335305 Jy ! Component: 100 - total flux cleaned = 0.00465365 Jy ! Component: 150 - total flux cleaned = 0.00572252 Jy ! Component: 200 - total flux cleaned = 0.00649118 Jy ! Total flux subtracted in 200 components = 0.00649118 Jy ! Clean residual min=-0.005687 max=0.005186 Jy/beam ! Clean residual mean=0.000057 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.606438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654786 Jy ! Component: 100 - total flux cleaned = 0.00120722 Jy ! Component: 150 - total flux cleaned = 0.00175193 Jy ! Component: 200 - total flux cleaned = 0.00195681 Jy ! Total flux subtracted in 200 components = 0.00195681 Jy ! Clean residual min=-0.004951 max=0.004395 Jy/beam ! Clean residual mean=0.000049 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.608394 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 115 components and 0.608395 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.119 mas, bmaj=13.03 mas, bpa=88.91 degrees ! Estimated noise=1656.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391753 Jy ! Component: 100 - total flux cleaned = -0.000336121 Jy ! Component: 150 - total flux cleaned = -0.000284071 Jy ! Component: 200 - total flux cleaned = -9.54472e-05 Jy ! Total flux subtracted in 200 components = -9.54472e-05 Jy ! Clean residual min=-0.004803 max=0.004184 Jy/beam ! Clean residual mean=0.000033 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.608299 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.608299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072555Jy sigma=0.000695 ! Fit after self-cal, rms=0.072514Jy sigma=0.000695 wmodel J1033+4116_S_2015_01_22_pus_map.mod ! Writing 134 model components to file: J1033+4116_S_2015_01_22_pus_map.mod wobs J1033+4116_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1033+4116_S_2015_01_22_pus_uvs.fits wwins J1033+4116_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1033+4116_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125703 Jy ! Component: 100 - total flux cleaned = -0.00132866 Jy ! Component: 150 - total flux cleaned = -0.00145062 Jy ! Component: 200 - total flux cleaned = -0.00184313 Jy ! Component: 250 - total flux cleaned = -0.00220862 Jy ! Component: 300 - total flux cleaned = -0.00259778 Jy ! Component: 350 - total flux cleaned = -0.00296342 Jy ! Component: 400 - total flux cleaned = -0.0033967 Jy ! Component: 450 - total flux cleaned = -0.00368565 Jy ! Component: 500 - total flux cleaned = -0.00384288 Jy ! Component: 550 - total flux cleaned = -0.00399386 Jy ! Component: 600 - total flux cleaned = -0.0041023 Jy ! Component: 650 - total flux cleaned = -0.00406736 Jy ! Component: 700 - total flux cleaned = -0.00410201 Jy ! Component: 750 - total flux cleaned = -0.00410188 Jy ! Component: 800 - total flux cleaned = -0.0041677 Jy ! Component: 850 - total flux cleaned = -0.00423224 Jy ! Component: 900 - total flux cleaned = -0.00426346 Jy ! Component: 950 - total flux cleaned = -0.00426338 Jy ! Component: 1000 - total flux cleaned = -0.00423332 Jy ! Component: 1050 - total flux cleaned = -0.00417355 Jy ! Component: 1100 - total flux cleaned = -0.00399683 Jy ! Component: 1150 - total flux cleaned = -0.00393896 Jy ! Component: 1200 - total flux cleaned = -0.00388156 Jy ! Component: 1250 - total flux cleaned = -0.0038531 Jy ! Component: 1300 - total flux cleaned = -0.00385295 Jy ! Component: 1350 - total flux cleaned = -0.00382476 Jy ! Component: 1400 - total flux cleaned = -0.00374156 Jy ! Component: 1450 - total flux cleaned = -0.00371401 Jy ! Component: 1500 - total flux cleaned = -0.00368661 Jy ! Component: 1550 - total flux cleaned = -0.00368667 Jy ! Component: 1600 - total flux cleaned = -0.00376742 Jy ! Component: 1650 - total flux cleaned = -0.0037675 Jy ! Component: 1700 - total flux cleaned = -0.00376763 Jy ! Component: 1750 - total flux cleaned = -0.00376752 Jy ! Component: 1800 - total flux cleaned = -0.00387219 Jy ! Component: 1850 - total flux cleaned = -0.00381992 Jy ! Component: 1900 - total flux cleaned = -0.00382009 Jy ! Component: 1950 - total flux cleaned = -0.00384622 Jy ! Component: 2000 - total flux cleaned = -0.00387223 Jy ! Component: 2050 - total flux cleaned = -0.0039754 Jy ! Component: 2100 - total flux cleaned = -0.00405278 Jy ! Component: 2150 - total flux cleaned = -0.00418166 Jy ! Component: 2200 - total flux cleaned = -0.00425903 Jy ! Component: 2250 - total flux cleaned = -0.00438822 Jy ! Component: 2300 - total flux cleaned = -0.00443997 Jy ! Component: 2350 - total flux cleaned = -0.00449158 Jy ! Component: 2400 - total flux cleaned = -0.00462113 Jy ! Component: 2450 - total flux cleaned = -0.00469906 Jy ! Component: 2500 - total flux cleaned = -0.00482973 Jy ! Component: 2550 - total flux cleaned = -0.00493459 Jy ! Component: 2600 - total flux cleaned = -0.00503987 Jy ! Component: 2650 - total flux cleaned = -0.00511898 Jy ! Component: 2700 - total flux cleaned = -0.00522535 Jy ! Component: 2750 - total flux cleaned = -0.00530564 Jy ! Component: 2800 - total flux cleaned = -0.0053593 Jy ! Component: 2850 - total flux cleaned = -0.00544032 Jy ! Component: 2900 - total flux cleaned = -0.00549477 Jy ! Component: 2950 - total flux cleaned = -0.00554978 Jy ! Component: 3000 - total flux cleaned = -0.00563251 Jy ! Component: 3050 - total flux cleaned = -0.00571541 Jy ! Component: 3100 - total flux cleaned = -0.00579909 Jy ! Component: 3150 - total flux cleaned = -0.00585537 Jy ! Component: 3200 - total flux cleaned = -0.00596846 Jy ! Component: 3250 - total flux cleaned = -0.00602565 Jy ! Component: 3300 - total flux cleaned = -0.00611165 Jy ! Component: 3350 - total flux cleaned = -0.00619843 Jy ! Component: 3400 - total flux cleaned = -0.00622776 Jy ! Component: 3450 - total flux cleaned = -0.00625724 Jy ! Component: 3500 - total flux cleaned = -0.0063161 Jy ! Component: 3550 - total flux cleaned = -0.00637573 Jy ! Component: 3600 - total flux cleaned = -0.00643603 Jy ! Component: 3650 - total flux cleaned = -0.00649696 Jy ! Component: 3700 - total flux cleaned = -0.00665044 Jy ! Component: 3750 - total flux cleaned = -0.00674348 Jy ! Component: 3800 - total flux cleaned = -0.00680624 Jy ! Component: 3850 - total flux cleaned = -0.00690138 Jy ! Component: 3900 - total flux cleaned = -0.00699789 Jy ! Component: 3950 - total flux cleaned = -0.00706322 Jy ! Component: 4000 - total flux cleaned = -0.0071614 Jy ! Component: 4050 - total flux cleaned = -0.00726119 Jy ! Total flux subtracted in 4096 components = -0.00732885 Jy ! Clean residual min=-0.001850 max=0.001960 Jy/beam ! Clean residual mean=-0.000002 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.60097 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 383 components and 0.60097 Jy ![Exited script file: muppet] wmap "J1033+4116_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.119 x 13.03 at 88.91 degrees (North through East) ! Clean map min=-0.0044487 max=0.56611 Jy/beam ! Writing clean map to FITS file: J1033+4116_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.566112 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067431 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.357338 0.357338 0.714675 1.42935 2.8587 5.7174 11.4348 22.8696 45.7392 91.4784 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.566 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.119 x 13.03 at 88.91 degrees (North through East) ! Clean map min=-0.0044487 max=0.56611 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+4116_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:50:21 2017