! Started logfile: J1033+071A_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:32:24 2016 obs J1033+071A_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1033+071A_S_2014_12_20_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.649383 visibilities/baseline/integration-bin. ! Found source: J1033+071A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 3156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+071A_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.800714Jy sigma=0.008599 ! Fit after self-cal, rms=0.792174Jy sigma=0.008512 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.214 mas, bpa=-12.71 degrees ! Estimated noise=1590.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150017 Jy ! Component: 100 - total flux cleaned = 0.192895 Jy ! Total flux subtracted in 100 components = 0.192895 Jy ! Clean residual min=-0.010539 max=0.017945 Jy/beam ! Clean residual mean=-0.000154 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 0.192895 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.192895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094202Jy sigma=0.000896 ! Fit after self-cal, rms=0.094164Jy sigma=0.000895 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=8.745 mas, bpa=-10.25 degrees ! Estimated noise=1205.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025902 Jy ! Component: 100 - total flux cleaned = 0.037636 Jy ! Component: 150 - total flux cleaned = 0.0445981 Jy ! Component: 200 - total flux cleaned = 0.0489199 Jy ! Total flux subtracted in 200 components = 0.0489199 Jy ! Clean residual min=-0.010802 max=0.007603 Jy/beam ! Clean residual mean=-0.000062 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.241815 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 54 components and 0.241815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086238Jy sigma=0.000825 ! Fit after self-cal, rms=0.086241Jy sigma=0.000825 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.87 HN 1.01 KP 1.11 ! LA 0.96 MK 0.96 NL 0.95 OV 0.99 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.00 KP 1.12 ! LA 0.90 MK 1.09 NL 1.06 OV 0.98 ! PT 1.03 SC 1.10 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.14 HN 1.04 KP 0.97 ! LA 0.78 MK 1.05 NL 1.25 OV 0.96 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.00 KP 0.89 ! LA 0.81 MK 1.01 NL 1.01 OV 1.01 ! PT 1.05 SC 0.96 ! ! ! Fit before self-cal, rms=0.086241Jy sigma=0.000825 ! Fit after self-cal, rms=0.080213Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.373 mas, bmaj=8.85 mas, bpa=-10.25 degrees ! Estimated noise=1217.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165812 Jy ! Component: 100 - total flux cleaned = 9.68376e-05 Jy ! Component: 150 - total flux cleaned = 6.64382e-05 Jy ! Component: 200 - total flux cleaned = 3.74039e-05 Jy ! Total flux subtracted in 200 components = 3.74039e-05 Jy ! Clean residual min=-0.004887 max=0.005176 Jy/beam ! Clean residual mean=0.000000 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.241852 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.241852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080186Jy sigma=0.000774 ! Fit after self-cal, rms=0.080158Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080158Jy sigma=0.000774 ! Fit after self-cal, rms=0.080232Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.369 mas, bmaj=8.853 mas, bpa=-10.29 degrees ! Estimated noise=1217.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238911 Jy ! Component: 100 - total flux cleaned = 0.000212911 Jy ! Component: 150 - total flux cleaned = 0.000188716 Jy ! Component: 200 - total flux cleaned = 0.000166364 Jy ! Total flux subtracted in 200 components = 0.000166364 Jy ! Clean residual min=-0.004907 max=0.005161 Jy/beam ! Clean residual mean=0.000000 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.242019 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.242019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080216Jy sigma=0.000774 ! Fit after self-cal, rms=0.080214Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.50905e-05 Jy ! Component: 100 - total flux cleaned = 5.48576e-05 Jy ! Component: 150 - total flux cleaned = 9.23622e-05 Jy ! Component: 200 - total flux cleaned = 0.00011057 Jy ! Total flux subtracted in 200 components = 0.00011057 Jy ! Clean residual min=-0.004890 max=0.005136 Jy/beam ! Clean residual mean=0.000001 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.242129 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.242129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080205Jy sigma=0.000774 ! Fit after self-cal, rms=0.080204Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080204Jy sigma=0.000774 ! Fit after self-cal, rms=0.080249Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.364 mas, bmaj=8.851 mas, bpa=-10.3 degrees ! Estimated noise=1218.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326914 Jy ! Component: 100 - total flux cleaned = 0.000344515 Jy ! Component: 150 - total flux cleaned = 0.000361676 Jy ! Component: 200 - total flux cleaned = 0.000378339 Jy ! Total flux subtracted in 200 components = 0.000378339 Jy ! Clean residual min=-0.004891 max=0.005109 Jy/beam ! Clean residual mean=0.000001 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.242507 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.242507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080241Jy sigma=0.000774 ! Fit after self-cal, rms=0.080240Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74797e-05 Jy ! Component: 100 - total flux cleaned = 5.29239e-05 Jy ! Component: 150 - total flux cleaned = 6.7887e-05 Jy ! Component: 200 - total flux cleaned = 8.29242e-05 Jy ! Total flux subtracted in 200 components = 8.29242e-05 Jy ! Clean residual min=-0.004881 max=0.005092 Jy/beam ! Clean residual mean=0.000001 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.24259 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.24259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080234Jy sigma=0.000774 ! Fit after self-cal, rms=0.080234Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080234Jy sigma=0.000774 ! Fit after self-cal, rms=0.080253Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.036 mas, bmaj=12.69 mas, bpa=12.61 degrees ! Estimated noise=1353.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681497 Jy ! Component: 100 - total flux cleaned = 0.000718862 Jy ! Component: 150 - total flux cleaned = 0.00070277 Jy ! Component: 200 - total flux cleaned = 0.000702533 Jy ! Total flux subtracted in 200 components = 0.000702533 Jy ! Clean residual min=-0.005810 max=0.006098 Jy/beam ! Clean residual mean=0.000004 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.243293 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.243293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080249Jy sigma=0.000774 ! Fit after self-cal, rms=0.080247Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54642e-06 Jy ! Component: 100 - total flux cleaned = -5.99364e-06 Jy ! Component: 150 - total flux cleaned = 9.47712e-06 Jy ! Component: 200 - total flux cleaned = 9.75908e-06 Jy ! Total flux subtracted in 200 components = 9.75908e-06 Jy ! Clean residual min=-0.005803 max=0.006086 Jy/beam ! Clean residual mean=0.000004 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.243303 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.243303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080245Jy sigma=0.000774 ! Fit after self-cal, rms=0.080245Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.359 mas, bmaj=8.847 mas, bpa=-10.31 degrees ! Estimated noise=1219.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.359 x 8.847 at -10.31 degrees (North through East) ! Clean map min=-0.0047256 max=0.20244 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=7.292 mas, bpa=-12.84 degrees ! Estimated noise=1613.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152017 Jy ! Component: 100 - total flux cleaned = 0.195022 Jy ! Component: 150 - total flux cleaned = 0.213641 Jy ! Component: 200 - total flux cleaned = 0.222933 Jy ! Total flux subtracted in 200 components = 0.222933 Jy ! Clean residual min=-0.007222 max=0.005975 Jy/beam ! Clean residual mean=-0.000050 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.222933 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.222933 Jy ! Inverting map and beam ! Estimated beam: bmin=4.359 mas, bmaj=8.847 mas, bpa=-10.31 degrees ! Estimated noise=1219.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827481 Jy ! Component: 100 - total flux cleaned = 0.0127144 Jy ! Component: 150 - total flux cleaned = 0.0153582 Jy ! Component: 200 - total flux cleaned = 0.0169014 Jy ! Total flux subtracted in 200 components = 0.0169014 Jy ! Clean residual min=-0.004899 max=0.004959 Jy/beam ! Clean residual mean=-0.000012 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.239835 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 57 components and 0.239835 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.036 mas, bmaj=12.69 mas, bpa=12.61 degrees ! Estimated noise=1353.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160648 Jy ! Component: 100 - total flux cleaned = 0.00174362 Jy ! Component: 150 - total flux cleaned = 0.00186572 Jy ! Component: 200 - total flux cleaned = 0.00203575 Jy ! Total flux subtracted in 200 components = 0.00203575 Jy ! Clean residual min=-0.005968 max=0.006204 Jy/beam ! Clean residual mean=-0.000005 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.241871 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106123 Jy ! Component: 100 - total flux cleaned = 0.000231788 Jy ! Component: 150 - total flux cleaned = 0.00035095 Jy ! Component: 200 - total flux cleaned = 0.000463416 Jy ! Total flux subtracted in 200 components = 0.000463416 Jy ! Clean residual min=-0.005906 max=0.006197 Jy/beam ! Clean residual mean=-0.000002 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.242334 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.242334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.359 mas, bmaj=8.847 mas, bpa=-10.31 degrees ! Estimated noise=1219.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290274 Jy ! Component: 100 - total flux cleaned = -9.8569e-05 Jy ! Component: 150 - total flux cleaned = 6.83168e-05 Jy ! Component: 200 - total flux cleaned = 0.000236897 Jy ! Total flux subtracted in 200 components = 0.000236897 Jy ! Clean residual min=-0.004878 max=0.005037 Jy/beam ! Clean residual mean=-0.000000 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.242571 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.242571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080260Jy sigma=0.000774 ! Fit after self-cal, rms=0.080260Jy sigma=0.000774 wmodel J1033+071A_S_2014_12_20_pus_map.mod ! Writing 68 model components to file: J1033+071A_S_2014_12_20_pus_map.mod wobs J1033+071A_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1033+071A_S_2014_12_20_pus_uvs.fits wwins J1033+071A_S_2014_12_20_pus_map.win ! wwins: Wrote 1 windows to J1033+071A_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468439 Jy ! Component: 100 - total flux cleaned = 0.000794055 Jy ! Component: 150 - total flux cleaned = 0.000940418 Jy ! Component: 200 - total flux cleaned = 0.000940106 Jy ! Component: 250 - total flux cleaned = 0.000940082 Jy ! Component: 300 - total flux cleaned = 0.0011216 Jy ! Component: 350 - total flux cleaned = 0.0010047 Jy ! Component: 400 - total flux cleaned = 0.000949313 Jy ! Component: 450 - total flux cleaned = 0.000844622 Jy ! Component: 500 - total flux cleaned = 0.000844448 Jy ! Component: 550 - total flux cleaned = 0.000893917 Jy ! Component: 600 - total flux cleaned = 0.00094293 Jy ! Component: 650 - total flux cleaned = 0.00108226 Jy ! Component: 700 - total flux cleaned = 0.00112673 Jy ! Component: 750 - total flux cleaned = 0.00112637 Jy ! Component: 800 - total flux cleaned = 0.0011255 Jy ! Component: 850 - total flux cleaned = 0.00104266 Jy ! Component: 900 - total flux cleaned = 0.00108349 Jy ! Component: 950 - total flux cleaned = 0.00112294 Jy ! Component: 1000 - total flux cleaned = 0.00120073 Jy ! Component: 1050 - total flux cleaned = 0.00127633 Jy ! Component: 1100 - total flux cleaned = 0.00123927 Jy ! Component: 1150 - total flux cleaned = 0.00138616 Jy ! Component: 1200 - total flux cleaned = 0.00145839 Jy ! Component: 1250 - total flux cleaned = 0.00163613 Jy ! Component: 1300 - total flux cleaned = 0.00174073 Jy ! Component: 1350 - total flux cleaned = 0.00180993 Jy ! Component: 1400 - total flux cleaned = 0.00194665 Jy ! Component: 1450 - total flux cleaned = 0.00214869 Jy ! Component: 1500 - total flux cleaned = 0.00221535 Jy ! Component: 1550 - total flux cleaned = 0.00237949 Jy ! Component: 1600 - total flux cleaned = 0.00228184 Jy ! Component: 1650 - total flux cleaned = 0.00231419 Jy ! Component: 1700 - total flux cleaned = 0.00228247 Jy ! Component: 1750 - total flux cleaned = 0.00234505 Jy ! Component: 1800 - total flux cleaned = 0.00237585 Jy ! Component: 1850 - total flux cleaned = 0.00234495 Jy ! Component: 1900 - total flux cleaned = 0.00234501 Jy ! Component: 1950 - total flux cleaned = 0.00234504 Jy ! Component: 2000 - total flux cleaned = 0.00234527 Jy ! Component: 2050 - total flux cleaned = 0.00234535 Jy ! Component: 2100 - total flux cleaned = 0.00240438 Jy ! Component: 2150 - total flux cleaned = 0.00240432 Jy ! Component: 2200 - total flux cleaned = 0.00246236 Jy ! Component: 2250 - total flux cleaned = 0.00240426 Jy ! Component: 2300 - total flux cleaned = 0.00237549 Jy ! Component: 2350 - total flux cleaned = 0.00228973 Jy ! Component: 2400 - total flux cleaned = 0.0022615 Jy ! Component: 2450 - total flux cleaned = 0.00226149 Jy ! Component: 2500 - total flux cleaned = 0.00223343 Jy ! Component: 2550 - total flux cleaned = 0.00220541 Jy ! Component: 2600 - total flux cleaned = 0.00214972 Jy ! Component: 2650 - total flux cleaned = 0.00217751 Jy ! Component: 2700 - total flux cleaned = 0.00203936 Jy ! Component: 2750 - total flux cleaned = 0.00203946 Jy ! Component: 2800 - total flux cleaned = 0.00195708 Jy ! Component: 2850 - total flux cleaned = 0.00184762 Jy ! Component: 2900 - total flux cleaned = 0.00173841 Jy ! Component: 2950 - total flux cleaned = 0.00165658 Jy ! Component: 3000 - total flux cleaned = 0.00162939 Jy ! Component: 3050 - total flux cleaned = 0.00149379 Jy ! Component: 3100 - total flux cleaned = 0.0014397 Jy ! Component: 3150 - total flux cleaned = 0.00135858 Jy ! Component: 3200 - total flux cleaned = 0.00133158 Jy ! Component: 3250 - total flux cleaned = 0.00127757 Jy ! Component: 3300 - total flux cleaned = 0.0011697 Jy ! Component: 3350 - total flux cleaned = 0.00114291 Jy ! Component: 3400 - total flux cleaned = 0.00103527 Jy ! Component: 3450 - total flux cleaned = 0.00100839 Jy ! Component: 3500 - total flux cleaned = 0.000900799 Jy ! Component: 3550 - total flux cleaned = 0.00079354 Jy ! Component: 3600 - total flux cleaned = 0.000793552 Jy ! Component: 3650 - total flux cleaned = 0.00071302 Jy ! Component: 3700 - total flux cleaned = 0.000578998 Jy ! Component: 3750 - total flux cleaned = 0.000471683 Jy ! Component: 3800 - total flux cleaned = 0.000391173 Jy ! Component: 3850 - total flux cleaned = 0.000310646 Jy ! Component: 3900 - total flux cleaned = 0.000203171 Jy ! Component: 3950 - total flux cleaned = 0.000122585 Jy ! Component: 4000 - total flux cleaned = -3.8567e-05 Jy ! Component: 4050 - total flux cleaned = -0.000200021 Jy ! Total flux subtracted in 4096 components = -0.000280723 Jy ! Clean residual min=-0.001531 max=0.001605 Jy/beam ! Clean residual mean=0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.24229 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 345 components and 0.24229 Jy ![Exited script file: muppet] wmap "J1033+071A_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.359 x 8.847 at -10.31 degrees (North through East) ! Clean map min=-0.003227 max=0.20302 Jy/beam ! Writing clean map to FITS file: J1033+071A_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.203022 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000491687 device "J1033+071A_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1033+071A_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.726554 0.726554 1.45311 2.90621 5.81243 11.6249 23.2497 46.4994 92.9989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.203 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.359 x 8.847 at -10.31 degrees (North through East) ! Clean map min=-0.003227 max=0.20302 Jy/beam quit ! Quitting program ! Log file J1033+071A_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:32:29 2016