! Started logfile: J1031+6020_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:58 2017 obs J1031+6020_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1031+6020_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1031+6020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1031+6020_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.759471Jy sigma=0.011325 ! Fit after self-cal, rms=0.720655Jy sigma=0.010807 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=5.622 mas, bpa=66.07 degrees ! Estimated noise=950.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203181 Jy ! Component: 100 - total flux cleaned = 0.254467 Jy ! Total flux subtracted in 100 components = 0.254467 Jy ! Clean residual min=-0.016688 max=0.021609 Jy/beam ! Clean residual mean=-0.000120 rms=0.004012 Jy/beam ! Combined flux in latest and established models = 0.254467 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.254467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094950Jy sigma=0.001255 ! Fit after self-cal, rms=0.094868Jy sigma=0.001255 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=7.036 mas, bpa=61.89 degrees ! Estimated noise=592.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391027 Jy ! Component: 100 - total flux cleaned = 0.0567827 Jy ! Component: 150 - total flux cleaned = 0.0671399 Jy ! Component: 200 - total flux cleaned = 0.0736517 Jy ! Total flux subtracted in 200 components = 0.0736517 Jy ! Clean residual min=-0.012459 max=0.012382 Jy/beam ! Clean residual mean=-0.000124 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.328118 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.328118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076681Jy sigma=0.001028 ! Fit after self-cal, rms=0.076387Jy sigma=0.001025 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.00 ! MK 1.00 NL 0.95 OV 0.94 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.97 ! MK 1.00 NL 1.02 OV 0.98 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.79 ! MK 1.02 NL 1.00 OV 0.92 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.86 ! MK 0.98 NL 1.08 OV 0.97 PT 1.00 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.076387Jy sigma=0.001025 ! Fit after self-cal, rms=0.066137Jy sigma=0.000902 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.041 mas, bpa=61.7 degrees ! Estimated noise=587.018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286176 Jy ! Component: 100 - total flux cleaned = -0.000751188 Jy ! Component: 150 - total flux cleaned = -0.000951345 Jy ! Component: 200 - total flux cleaned = -0.000948245 Jy ! Total flux subtracted in 200 components = -0.000948245 Jy ! Clean residual min=-0.003653 max=0.004307 Jy/beam ! Clean residual mean=-0.000019 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.32717 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.32717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065885Jy sigma=0.000899 ! Fit after self-cal, rms=0.065456Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065456Jy sigma=0.000897 ! Fit after self-cal, rms=0.065208Jy sigma=0.000894 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=7.025 mas, bpa=61.76 degrees ! Estimated noise=586.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389272 Jy ! Component: 100 - total flux cleaned = 0.000216627 Jy ! Component: 150 - total flux cleaned = 0.000169206 Jy ! Component: 200 - total flux cleaned = 0.000205105 Jy ! Total flux subtracted in 200 components = 0.000205105 Jy ! Clean residual min=-0.002919 max=0.003851 Jy/beam ! Clean residual mean=-0.000006 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.327375 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.327375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065102Jy sigma=0.000893 ! Fit after self-cal, rms=0.065050Jy sigma=0.000892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370047 Jy ! Component: 100 - total flux cleaned = 0.00429031 Jy ! Component: 150 - total flux cleaned = 0.00429008 Jy ! Component: 200 - total flux cleaned = 0.00432855 Jy ! Total flux subtracted in 200 components = 0.00432855 Jy ! Clean residual min=-0.002486 max=0.003143 Jy/beam ! Clean residual mean=0.000008 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.331704 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 64 components and 0.331704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064828Jy sigma=0.000889 ! Fit after self-cal, rms=0.064805Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064805Jy sigma=0.000889 ! Fit after self-cal, rms=0.064545Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.025 mas, bpa=61.66 degrees ! Estimated noise=584.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144398 Jy ! Component: 100 - total flux cleaned = 0.00175771 Jy ! Component: 150 - total flux cleaned = 0.00190176 Jy ! Component: 200 - total flux cleaned = 0.00196734 Jy ! Total flux subtracted in 200 components = 0.00196734 Jy ! Clean residual min=-0.002373 max=0.002768 Jy/beam ! Clean residual mean=0.000012 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.333671 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.333671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064479Jy sigma=0.000887 ! Fit after self-cal, rms=0.064465Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.5, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202788 Jy ! Component: 100 - total flux cleaned = 0.00242149 Jy ! Component: 150 - total flux cleaned = 0.00255779 Jy ! Component: 200 - total flux cleaned = 0.00283041 Jy ! Total flux subtracted in 200 components = 0.00283041 Jy ! Clean residual min=-0.001910 max=0.001785 Jy/beam ! Clean residual mean=0.000015 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.336501 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.336501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064341Jy sigma=0.000886 ! Fit after self-cal, rms=0.064331Jy sigma=0.000886 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064331Jy sigma=0.000886 ! Fit after self-cal, rms=0.064347Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.578 mas, bmaj=11.54 mas, bpa=60.5 degrees ! Estimated noise=684.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117929 Jy ! Component: 100 - total flux cleaned = 0.00147745 Jy ! Component: 150 - total flux cleaned = 0.00161324 Jy ! Component: 200 - total flux cleaned = 0.00173219 Jy ! Total flux subtracted in 200 components = 0.00173219 Jy ! Clean residual min=-0.002355 max=0.001794 Jy/beam ! Clean residual mean=0.000027 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.338233 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.338233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064335Jy sigma=0.000885 ! Fit after self-cal, rms=0.064335Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148064 Jy ! Component: 100 - total flux cleaned = 0.000274948 Jy ! Component: 150 - total flux cleaned = 0.000390377 Jy ! Component: 200 - total flux cleaned = 0.000479499 Jy ! Total flux subtracted in 200 components = 0.000479499 Jy ! Clean residual min=-0.002256 max=0.001690 Jy/beam ! Clean residual mean=0.000027 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.338713 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 0.338713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064328Jy sigma=0.000885 ! Fit after self-cal, rms=0.064328Jy sigma=0.000885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.026 mas, bpa=61.68 degrees ! Estimated noise=585.019 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.026 at 61.68 degrees (North through East) ! Clean map min=-0.0016107 max=0.27505 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=5.568 mas, bpa=65.97 degrees ! Estimated noise=950.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203166 Jy ! Component: 100 - total flux cleaned = 0.256307 Jy ! Component: 150 - total flux cleaned = 0.282416 Jy ! Component: 200 - total flux cleaned = 0.297735 Jy ! Total flux subtracted in 200 components = 0.297735 Jy ! Clean residual min=-0.006228 max=0.008056 Jy/beam ! Clean residual mean=-0.000037 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.297735 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.297735 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.026 mas, bpa=61.68 degrees ! Estimated noise=585.019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149591 Jy ! Component: 100 - total flux cleaned = 0.0230144 Jy ! Component: 150 - total flux cleaned = 0.0279154 Jy ! Component: 200 - total flux cleaned = 0.0312974 Jy ! Total flux subtracted in 200 components = 0.0312974 Jy ! Clean residual min=-0.002721 max=0.002360 Jy/beam ! Clean residual mean=-0.000007 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.329032 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 49 components and 0.329032 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.578 mas, bmaj=11.54 mas, bpa=60.5 degrees ! Estimated noise=684.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301412 Jy ! Component: 100 - total flux cleaned = 0.00494769 Jy ! Component: 150 - total flux cleaned = 0.00637339 Jy ! Component: 200 - total flux cleaned = 0.00742011 Jy ! Total flux subtracted in 200 components = 0.00742011 Jy ! Clean residual min=-0.002193 max=0.001916 Jy/beam ! Clean residual mean=0.000017 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.336452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428296 Jy ! Component: 100 - total flux cleaned = 0.000644871 Jy ! Component: 150 - total flux cleaned = 0.00078459 Jy ! Component: 200 - total flux cleaned = 0.000939845 Jy ! Total flux subtracted in 200 components = 0.000939845 Jy ! Clean residual min=-0.002081 max=0.001809 Jy/beam ! Clean residual mean=0.000021 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.337392 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 93 components and 0.337392 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.026 mas, bpa=61.68 degrees ! Estimated noise=585.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239284 Jy ! Component: 100 - total flux cleaned = 5.35112e-05 Jy ! Component: 150 - total flux cleaned = -3.19857e-05 Jy ! Component: 200 - total flux cleaned = -6.97394e-05 Jy ! Total flux subtracted in 200 components = -6.97394e-05 Jy ! Clean residual min=-0.001834 max=0.001573 Jy/beam ! Clean residual mean=0.000009 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.337322 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.337322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064354Jy sigma=0.000885 ! Fit after self-cal, rms=0.064340Jy sigma=0.000885 wmodel J1031+6020_S_2014_01_04_pus_map.mod ! Writing 113 model components to file: J1031+6020_S_2014_01_04_pus_map.mod wobs J1031+6020_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1031+6020_S_2014_01_04_pus_uvs.fits wwins J1031+6020_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1031+6020_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000723616 Jy ! Component: 100 - total flux cleaned = -0.0011654 Jy ! Component: 150 - total flux cleaned = -0.00149657 Jy ! Component: 200 - total flux cleaned = -0.00173471 Jy ! Component: 250 - total flux cleaned = -0.0019606 Jy ! Component: 300 - total flux cleaned = -0.00202532 Jy ! Component: 350 - total flux cleaned = -0.0021291 Jy ! Component: 400 - total flux cleaned = -0.00220879 Jy ! Component: 450 - total flux cleaned = -0.00230503 Jy ! Component: 500 - total flux cleaned = -0.00234225 Jy ! Component: 550 - total flux cleaned = -0.0023784 Jy ! Component: 600 - total flux cleaned = -0.00236097 Jy ! Component: 650 - total flux cleaned = -0.00229292 Jy ! Component: 700 - total flux cleaned = -0.00227636 Jy ! Component: 750 - total flux cleaned = -0.002195 Jy ! Component: 800 - total flux cleaned = -0.00214736 Jy ! Component: 850 - total flux cleaned = -0.00208523 Jy ! Component: 900 - total flux cleaned = -0.00208479 Jy ! Component: 950 - total flux cleaned = -0.00198027 Jy ! Component: 1000 - total flux cleaned = -0.00198043 Jy ! Component: 1050 - total flux cleaned = -0.001966 Jy ! Component: 1100 - total flux cleaned = -0.00193784 Jy ! Component: 1150 - total flux cleaned = -0.00189667 Jy ! Component: 1200 - total flux cleaned = -0.00189674 Jy ! Component: 1250 - total flux cleaned = -0.00184347 Jy ! Component: 1300 - total flux cleaned = -0.00181707 Jy ! Component: 1350 - total flux cleaned = -0.00175267 Jy ! Component: 1400 - total flux cleaned = -0.00171465 Jy ! Component: 1450 - total flux cleaned = -0.0016521 Jy ! Component: 1500 - total flux cleaned = -0.00161518 Jy ! Component: 1550 - total flux cleaned = -0.0015544 Jy ! Component: 1600 - total flux cleaned = -0.00153034 Jy ! Component: 1650 - total flux cleaned = -0.001471 Jy ! Component: 1700 - total flux cleaned = -0.00144747 Jy ! Component: 1750 - total flux cleaned = -0.00138957 Jy ! Component: 1800 - total flux cleaned = -0.00132115 Jy ! Component: 1850 - total flux cleaned = -0.00128732 Jy ! Component: 1900 - total flux cleaned = -0.00120909 Jy ! Component: 1950 - total flux cleaned = -0.00116495 Jy ! Component: 2000 - total flux cleaned = -0.00113223 Jy ! Component: 2050 - total flux cleaned = -0.00106735 Jy ! Component: 2100 - total flux cleaned = -0.00102456 Jy ! Component: 2150 - total flux cleaned = -0.000992778 Jy ! Component: 2200 - total flux cleaned = -0.000950818 Jy ! Component: 2250 - total flux cleaned = -0.00092991 Jy ! Component: 2300 - total flux cleaned = -0.00087836 Jy ! Component: 2350 - total flux cleaned = -0.000827307 Jy ! Component: 2400 - total flux cleaned = -0.000766618 Jy ! Component: 2450 - total flux cleaned = -0.000766676 Jy ! Component: 2500 - total flux cleaned = -0.00072688 Jy ! Component: 2550 - total flux cleaned = -0.000687425 Jy ! Component: 2600 - total flux cleaned = -0.000609108 Jy ! Component: 2650 - total flux cleaned = -0.000599426 Jy ! Component: 2700 - total flux cleaned = -0.000531822 Jy ! Component: 2750 - total flux cleaned = -0.000503032 Jy ! Component: 2800 - total flux cleaned = -0.000455406 Jy ! Component: 2850 - total flux cleaned = -0.000398725 Jy ! Component: 2900 - total flux cleaned = -0.000361181 Jy ! Component: 2950 - total flux cleaned = -0.000333202 Jy ! Component: 3000 - total flux cleaned = -0.000277554 Jy ! Component: 3050 - total flux cleaned = -0.000222265 Jy ! Component: 3100 - total flux cleaned = -0.000185636 Jy ! Component: 3150 - total flux cleaned = -0.000131043 Jy ! Component: 3200 - total flux cleaned = -9.48581e-05 Jy ! Component: 3250 - total flux cleaned = -5.88911e-05 Jy ! Component: 3300 - total flux cleaned = -4.98844e-05 Jy ! Component: 3350 - total flux cleaned = 2.13869e-05 Jy ! Component: 3400 - total flux cleaned = 3.9096e-05 Jy ! Component: 3450 - total flux cleaned = 7.43895e-05 Jy ! Component: 3500 - total flux cleaned = 9.1961e-05 Jy ! Component: 3550 - total flux cleaned = 0.000126929 Jy ! Component: 3600 - total flux cleaned = 0.000153057 Jy ! Component: 3650 - total flux cleaned = 0.000205004 Jy ! Component: 3700 - total flux cleaned = 0.000213579 Jy ! Component: 3750 - total flux cleaned = 0.000230702 Jy ! Component: 3800 - total flux cleaned = 0.00024778 Jy ! Component: 3850 - total flux cleaned = 0.000273324 Jy ! Component: 3900 - total flux cleaned = 0.000307263 Jy ! Component: 3950 - total flux cleaned = 0.000349395 Jy ! Component: 4000 - total flux cleaned = 0.000349401 Jy ! Component: 4050 - total flux cleaned = 0.000391261 Jy ! Total flux subtracted in 4096 components = 0.000391259 Jy ! Clean residual min=-0.000476 max=0.000451 Jy/beam ! Clean residual mean=0.000003 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.337714 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 358 components and 0.337713 Jy ![Exited script file: muppet] wmap "J1031+6020_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.026 at 61.68 degrees (North through East) ! Clean map min=-0.0011584 max=0.27567 Jy/beam ! Writing clean map to FITS file: J1031+6020_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.275672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148775 0.148775 0.29755 0.5951 1.1902 2.3804 4.7608 9.5216 19.0432 38.0864 76.1728 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.275 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.026 at 61.68 degrees (North through East) ! Clean map min=-0.0011584 max=0.27567 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1031+6020_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:24:03 2017