! Started logfile: J1025-0509_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:21:01 2017 obs J1025-0509_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1025-0509_S_2015_01_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.786745 visibilities/baseline/integration-bin. ! Found source: J1025-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1025-0509_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905057Jy sigma=0.009542 ! Fit after self-cal, rms=0.883417Jy sigma=0.009350 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=6.72 mas, bpa=0.6885 degrees ! Estimated noise=770.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885996 Jy ! Component: 100 - total flux cleaned = 0.109407 Jy ! Total flux subtracted in 100 components = 0.109407 Jy ! Clean residual min=-0.005691 max=0.007902 Jy/beam ! Clean residual mean=-0.000003 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.109407 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.109407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159787Jy sigma=0.000823 ! Fit after self-cal, rms=0.159775Jy sigma=0.000823 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.965 mas, bpa=0.4514 degrees ! Estimated noise=556.629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116759 Jy ! Component: 100 - total flux cleaned = 0.0170819 Jy ! Component: 150 - total flux cleaned = 0.0199949 Jy ! Component: 200 - total flux cleaned = 0.0216713 Jy ! Total flux subtracted in 200 components = 0.0216713 Jy ! Clean residual min=-0.006631 max=0.005172 Jy/beam ! Clean residual mean=-0.000010 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.131078 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 0.131078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157823Jy sigma=0.000815 ! Fit after self-cal, rms=0.157810Jy sigma=0.000815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.47 HN 1.01 KP 1.07 ! LA 1.05 MK 1.04 NL 1.03 OV 1.02 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.51 HN 1.06 KP 1.03 ! LA 1.01 MK 1.05 NL 1.13 OV 1.07 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.64 HN 1.05 KP 0.88 ! LA 0.80 MK 1.05 NL 1.21 OV 0.97 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.64 HN 1.03 KP 0.81 ! LA 0.88 MK 1.02 NL 1.02 OV 1.00 ! PT 1.05 SC 0.96 ! ! ! Fit before self-cal, rms=0.157810Jy sigma=0.000815 ! Fit after self-cal, rms=0.102754Jy sigma=0.000796 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=8.056 mas, bpa=0.8902 degrees ! Estimated noise=560.441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240724 Jy ! Component: 100 - total flux cleaned = 0.00183099 Jy ! Component: 150 - total flux cleaned = 0.00128576 Jy ! Component: 200 - total flux cleaned = 0.000994112 Jy ! Total flux subtracted in 200 components = 0.000994112 Jy ! Clean residual min=-0.002637 max=0.002787 Jy/beam ! Clean residual mean=-0.000010 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.132072 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.132072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102590Jy sigma=0.000794 ! Fit after self-cal, rms=0.102334Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102334Jy sigma=0.000793 ! Fit after self-cal, rms=0.101519Jy sigma=0.000792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=8.047 mas, bpa=0.7731 degrees ! Estimated noise=558.569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853147 Jy ! Component: 100 - total flux cleaned = 0.000614762 Jy ! Component: 150 - total flux cleaned = 0.000368459 Jy ! Component: 200 - total flux cleaned = 0.000157439 Jy ! Total flux subtracted in 200 components = 0.000157439 Jy ! Clean residual min=-0.002003 max=0.002567 Jy/beam ! Clean residual mean=-0.000007 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.13223 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.13223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101470Jy sigma=0.000791 ! Fit after self-cal, rms=0.101455Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227735 Jy ! Component: 100 - total flux cleaned = 0.00357888 Jy ! Component: 150 - total flux cleaned = 0.00435797 Jy ! Component: 200 - total flux cleaned = 0.00488406 Jy ! Total flux subtracted in 200 components = 0.00488406 Jy ! Clean residual min=-0.001806 max=0.002163 Jy/beam ! Clean residual mean=-0.000007 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.137114 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.137114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101385Jy sigma=0.000791 ! Fit after self-cal, rms=0.101381Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101381Jy sigma=0.000790 ! Fit after self-cal, rms=0.101430Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=8.038 mas, bpa=0.7616 degrees ! Estimated noise=557.801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580601 Jy ! Component: 100 - total flux cleaned = 0.000989285 Jy ! Component: 150 - total flux cleaned = 0.00113777 Jy ! Component: 200 - total flux cleaned = 0.00124678 Jy ! Total flux subtracted in 200 components = 0.00124678 Jy ! Clean residual min=-0.001788 max=0.002080 Jy/beam ! Clean residual mean=-0.000006 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.138361 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 0.138361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101402Jy sigma=0.000790 ! Fit after self-cal, rms=0.101402Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016941 Jy ! Component: 100 - total flux cleaned = 0.000271464 Jy ! Component: 150 - total flux cleaned = 0.000318359 Jy ! Component: 200 - total flux cleaned = 0.000385639 Jy ! Total flux subtracted in 200 components = 0.000385639 Jy ! Clean residual min=-0.001750 max=0.002070 Jy/beam ! Clean residual mean=-0.000006 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.138746 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.138746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101385Jy sigma=0.000790 ! Fit after self-cal, rms=0.101383Jy sigma=0.000790 ! Inverting map ! Added new window around map position (-88.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198639 Jy ! Component: 100 - total flux cleaned = 0.00307802 Jy ! Component: 150 - total flux cleaned = 0.00364078 Jy ! Component: 200 - total flux cleaned = 0.00390186 Jy ! Total flux subtracted in 200 components = 0.00390186 Jy ! Clean residual min=-0.001661 max=0.002192 Jy/beam ! Clean residual mean=-0.000005 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.142648 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 141 components and 0.142648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101333Jy sigma=0.000790 ! Fit after self-cal, rms=0.101326Jy sigma=0.000790 ! Inverting map ! Added new window around map position (14, -88). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174807 Jy ! Component: 100 - total flux cleaned = 0.00250374 Jy ! Component: 150 - total flux cleaned = 0.00303652 Jy ! Component: 200 - total flux cleaned = 0.00351797 Jy ! Total flux subtracted in 200 components = 0.00351797 Jy ! Clean residual min=-0.001469 max=0.001752 Jy/beam ! Clean residual mean=-0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.146166 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 0.146166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101290Jy sigma=0.000789 ! Fit after self-cal, rms=0.101289Jy sigma=0.000789 ! Inverting map ! Added new window around map position (89, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011952 Jy ! Component: 100 - total flux cleaned = 0.00148625 Jy ! Component: 150 - total flux cleaned = 0.00181367 Jy ! Component: 200 - total flux cleaned = 0.00208368 Jy ! Total flux subtracted in 200 components = 0.00208368 Jy ! Clean residual min=-0.001515 max=0.001427 Jy/beam ! Clean residual mean=-0.000004 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.14825 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 186 components and 0.14825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101253Jy sigma=0.000789 ! Fit after self-cal, rms=0.101251Jy sigma=0.000789 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101251Jy sigma=0.000789 ! Fit after self-cal, rms=0.101482Jy sigma=0.000789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.405 mas, bmaj=13.03 mas, bpa=0.3894 degrees ! Estimated noise=699.132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111638 Jy ! Component: 100 - total flux cleaned = 0.00194612 Jy ! Component: 150 - total flux cleaned = 0.00255848 Jy ! Component: 200 - total flux cleaned = 0.00295037 Jy ! Total flux subtracted in 200 components = 0.00295037 Jy ! Clean residual min=-0.001641 max=0.001562 Jy/beam ! Clean residual mean=-0.000006 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.1512 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 207 components and 0.1512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101470Jy sigma=0.000789 ! Fit after self-cal, rms=0.101469Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576252 Jy ! Component: 100 - total flux cleaned = 0.000835886 Jy ! Component: 150 - total flux cleaned = 0.000975795 Jy ! Component: 200 - total flux cleaned = 0.00112699 Jy ! Total flux subtracted in 200 components = 0.00112699 Jy ! Clean residual min=-0.001568 max=0.001494 Jy/beam ! Clean residual mean=-0.000005 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.152327 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 223 components and 0.152327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101464Jy sigma=0.000789 ! Fit after self-cal, rms=0.101463Jy sigma=0.000789 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.028 mas, bpa=0.7391 degrees ! Estimated noise=557.144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.028 at 0.7391 degrees (North through East) ! Clean map min=-0.0016966 max=0.11657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.786 mas, bpa=1.091 degrees ! Estimated noise=774.987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0887187 Jy ! Component: 100 - total flux cleaned = 0.110162 Jy ! Component: 150 - total flux cleaned = 0.119544 Jy ! Component: 200 - total flux cleaned = 0.125441 Jy ! Total flux subtracted in 200 components = 0.125441 Jy ! Clean residual min=-0.003372 max=0.003584 Jy/beam ! Clean residual mean=-0.000004 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.125441 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.125441 Jy ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.028 mas, bpa=0.7391 degrees ! Estimated noise=557.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524636 Jy ! Component: 100 - total flux cleaned = 0.00865135 Jy ! Component: 150 - total flux cleaned = 0.0113789 Jy ! Component: 200 - total flux cleaned = 0.0134315 Jy ! Total flux subtracted in 200 components = 0.0134315 Jy ! Clean residual min=-0.002490 max=0.002148 Jy/beam ! Clean residual mean=-0.000007 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.138873 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 64 components and 0.138873 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.405 mas, bmaj=13.03 mas, bpa=0.3894 degrees ! Estimated noise=699.132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197316 Jy ! Component: 100 - total flux cleaned = 0.00339307 Jy ! Component: 150 - total flux cleaned = 0.00465943 Jy ! Component: 200 - total flux cleaned = 0.00561341 Jy ! Total flux subtracted in 200 components = 0.00561341 Jy ! Clean residual min=-0.002020 max=0.002034 Jy/beam ! Clean residual mean=-0.000010 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.144486 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907815 Jy ! Component: 100 - total flux cleaned = 0.00177315 Jy ! Component: 150 - total flux cleaned = 0.00250238 Jy ! Component: 200 - total flux cleaned = 0.00329707 Jy ! Total flux subtracted in 200 components = 0.00329707 Jy ! Clean residual min=-0.001811 max=0.001765 Jy/beam ! Clean residual mean=-0.000009 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.147783 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 145 components and 0.147783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.028 mas, bpa=0.7391 degrees ! Estimated noise=557.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663043 Jy ! Component: 100 - total flux cleaned = 0.00103016 Jy ! Component: 150 - total flux cleaned = 0.00144873 Jy ! Component: 200 - total flux cleaned = 0.00179017 Jy ! Total flux subtracted in 200 components = 0.00179017 Jy ! Clean residual min=-0.001493 max=0.001473 Jy/beam ! Clean residual mean=-0.000004 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.149573 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 171 components and 0.149573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101538Jy sigma=0.000789 ! Fit after self-cal, rms=0.101535Jy sigma=0.000789 wmodel J1025-0509_S_2015_01_23_pus_map.mod ! Writing 171 model components to file: J1025-0509_S_2015_01_23_pus_map.mod wobs J1025-0509_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1025-0509_S_2015_01_23_pus_uvs.fits wwins J1025-0509_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J1025-0509_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.84253e-05 Jy ! Component: 100 - total flux cleaned = 0.000106667 Jy ! Component: 150 - total flux cleaned = 0.000205175 Jy ! Component: 200 - total flux cleaned = 0.000252846 Jy ! Component: 250 - total flux cleaned = 0.000275515 Jy ! Component: 300 - total flux cleaned = 0.000252939 Jy ! Component: 350 - total flux cleaned = 0.000252965 Jy ! Component: 400 - total flux cleaned = 0.000274348 Jy ! Component: 450 - total flux cleaned = 0.000274485 Jy ! Component: 500 - total flux cleaned = 0.000295288 Jy ! Component: 550 - total flux cleaned = 0.000335482 Jy ! Component: 600 - total flux cleaned = 0.000335755 Jy ! Component: 650 - total flux cleaned = 0.00031682 Jy ! Component: 700 - total flux cleaned = 0.000355306 Jy ! Component: 750 - total flux cleaned = 0.000355521 Jy ! Component: 800 - total flux cleaned = 0.000374086 Jy ! Component: 850 - total flux cleaned = 0.000356091 Jy ! Component: 900 - total flux cleaned = 0.000373928 Jy ! Component: 950 - total flux cleaned = 0.000321434 Jy ! Component: 1000 - total flux cleaned = 0.000321647 Jy ! Component: 1050 - total flux cleaned = 0.000321866 Jy ! Component: 1100 - total flux cleaned = 0.00030497 Jy ! Component: 1150 - total flux cleaned = 0.000288123 Jy ! Component: 1200 - total flux cleaned = 0.000320744 Jy ! Component: 1250 - total flux cleaned = 0.000304239 Jy ! Component: 1300 - total flux cleaned = 0.000352221 Jy ! Component: 1350 - total flux cleaned = 0.000304714 Jy ! Component: 1400 - total flux cleaned = 0.000382735 Jy ! Component: 1450 - total flux cleaned = 0.000397879 Jy ! Component: 1500 - total flux cleaned = 0.000382942 Jy ! Component: 1550 - total flux cleaned = 0.000428064 Jy ! Component: 1600 - total flux cleaned = 0.000442765 Jy ! Component: 1650 - total flux cleaned = 0.00045746 Jy ! Component: 1700 - total flux cleaned = 0.000515763 Jy ! Component: 1750 - total flux cleaned = 0.000544343 Jy ! Component: 1800 - total flux cleaned = 0.000572998 Jy ! Component: 1850 - total flux cleaned = 0.000601355 Jy ! Component: 1900 - total flux cleaned = 0.000671404 Jy ! Component: 1950 - total flux cleaned = 0.000699237 Jy ! Component: 2000 - total flux cleaned = 0.000795091 Jy ! Component: 2050 - total flux cleaned = 0.000862979 Jy ! Component: 2100 - total flux cleaned = 0.000916905 Jy ! Component: 2150 - total flux cleaned = 0.000983605 Jy ! Component: 2200 - total flux cleaned = 0.00103656 Jy ! Component: 2250 - total flux cleaned = 0.00111508 Jy ! Component: 2300 - total flux cleaned = 0.00114095 Jy ! Component: 2350 - total flux cleaned = 0.00124374 Jy ! Component: 2400 - total flux cleaned = 0.00125637 Jy ! Component: 2450 - total flux cleaned = 0.00129439 Jy ! Component: 2500 - total flux cleaned = 0.00139469 Jy ! Component: 2550 - total flux cleaned = 0.00143199 Jy ! Component: 2600 - total flux cleaned = 0.00149356 Jy ! Component: 2650 - total flux cleaned = 0.00157923 Jy ! Component: 2700 - total flux cleaned = 0.0016277 Jy ! Component: 2750 - total flux cleaned = 0.0016758 Jy ! Component: 2800 - total flux cleaned = 0.00174748 Jy ! Component: 2850 - total flux cleaned = 0.0018187 Jy ! Component: 2900 - total flux cleaned = 0.00188925 Jy ! Component: 2950 - total flux cleaned = 0.00194767 Jy ! Component: 3000 - total flux cleaned = 0.00201703 Jy ! Component: 3050 - total flux cleaned = 0.00209755 Jy ! Component: 3100 - total flux cleaned = 0.00213167 Jy ! Component: 3150 - total flux cleaned = 0.00218839 Jy ! Component: 3200 - total flux cleaned = 0.002256 Jy ! Component: 3250 - total flux cleaned = 0.00234543 Jy ! Component: 3300 - total flux cleaned = 0.00236763 Jy ! Component: 3350 - total flux cleaned = 0.0024228 Jy ! Component: 3400 - total flux cleaned = 0.00248843 Jy ! Component: 3450 - total flux cleaned = 0.00252101 Jy ! Component: 3500 - total flux cleaned = 0.0025426 Jy ! Component: 3550 - total flux cleaned = 0.00257482 Jy ! Component: 3600 - total flux cleaned = 0.00264923 Jy ! Component: 3650 - total flux cleaned = 0.00267038 Jy ! Component: 3700 - total flux cleaned = 0.00270186 Jy ! Component: 3750 - total flux cleaned = 0.00273322 Jy ! Component: 3800 - total flux cleaned = 0.00277464 Jy ! Component: 3850 - total flux cleaned = 0.00284661 Jy ! Component: 3900 - total flux cleaned = 0.00286708 Jy ! Component: 3950 - total flux cleaned = 0.00286717 Jy ! Component: 4000 - total flux cleaned = 0.00293781 Jy ! Component: 4050 - total flux cleaned = 0.00295792 Jy ! Total flux subtracted in 4096 components = 0.00303768 Jy ! Clean residual min=-0.000556 max=0.000626 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.152611 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 438 components and 0.152611 Jy ![Exited script file: muppet] wmap "J1025-0509_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.028 at 0.7391 degrees (North through East) ! Clean map min=-0.001362 max=0.11656 Jy/beam ! Writing clean map to FITS file: J1025-0509_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116562 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.480022 0.480022 0.960043 1.92009 3.84017 7.68035 15.3607 30.7214 61.4428 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.028 at 0.7391 degrees (North through East) ! Clean map min=-0.001362 max=0.11656 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1025-0509_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:21:08 2017