! Started logfile: J1022-1037_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:56:19 2016 obs J1022-1037_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1022-1037_S_2015_03_17_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977957 visibilities/baseline/integration-bin. ! Found source: J1022-1037 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1022-1037_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927598Jy sigma=0.009657 ! Fit after self-cal, rms=0.892214Jy sigma=0.009298 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.458 mas, bpa=-3.52 degrees ! Estimated noise=654.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589571 Jy ! Component: 100 - total flux cleaned = 0.0928591 Jy ! Total flux subtracted in 100 components = 0.0928591 Jy ! Clean residual min=-0.010768 max=0.027285 Jy/beam ! Clean residual mean=0.000063 rms=0.004092 Jy/beam ! Combined flux in latest and established models = 0.0928591 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0928591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154811Jy sigma=0.001445 ! Fit after self-cal, rms=0.154326Jy sigma=0.001440 ! Inverting map ! Added new window around map position (-4.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312282 Jy ! Component: 100 - total flux cleaned = 0.0552107 Jy ! Total flux subtracted in 100 components = 0.0552107 Jy ! Clean residual min=-0.009331 max=0.023183 Jy/beam ! Clean residual mean=0.000049 rms=0.003318 Jy/beam ! Combined flux in latest and established models = 0.14807 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 85 components and 0.14807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134942Jy sigma=0.001254 ! Fit after self-cal, rms=0.134113Jy sigma=0.001245 ! Inverting map ! Added new window around map position (4.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241013 Jy ! Component: 100 - total flux cleaned = 0.0432718 Jy ! Total flux subtracted in 100 components = 0.0432718 Jy ! Clean residual min=-0.007603 max=0.013191 Jy/beam ! Clean residual mean=0.000039 rms=0.002719 Jy/beam ! Combined flux in latest and established models = 0.191342 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 132 components and 0.191342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120797Jy sigma=0.001119 ! Fit after self-cal, rms=0.120652Jy sigma=0.001118 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.851 mas, bpa=-4.318 degrees ! Estimated noise=483.705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0394681 Jy ! Component: 100 - total flux cleaned = 0.0681002 Jy ! Component: 150 - total flux cleaned = 0.0900895 Jy ! Component: 200 - total flux cleaned = 0.107173 Jy ! Total flux subtracted in 200 components = 0.107173 Jy ! Clean residual min=-0.010040 max=0.018097 Jy/beam ! Clean residual mean=0.000031 rms=0.003762 Jy/beam ! Combined flux in latest and established models = 0.298515 Jy ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 199 components and 0.298515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098740Jy sigma=0.000926 ! Fit after self-cal, rms=0.098389Jy sigma=0.000922 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.84 HN 1.05 KP 1.00 ! LA 0.87 MK 1.06 NL 1.36 OV 1.03 ! PT 0.86 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.87 HN 1.11 KP 0.92 ! LA 0.86 MK 1.10 NL 1.45 OV 1.04 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.89 HN 1.15 KP 0.83 ! LA 0.71 MK 1.02 NL 1.66 OV 0.96 ! PT 0.89 SC 0.90 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.95 HN 0.98 KP 0.84 ! LA 0.74 MK 1.15 NL 1.53 OV 1.04 ! PT 0.88 SC 0.88 ! ! ! Fit before self-cal, rms=0.098389Jy sigma=0.000922 ! Fit after self-cal, rms=0.090338Jy sigma=0.000835 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=7.987 mas, bpa=-2.707 degrees ! Estimated noise=490.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465379 Jy ! Component: 100 - total flux cleaned = 0.00038672 Jy ! Component: 150 - total flux cleaned = 0.000517065 Jy ! Component: 200 - total flux cleaned = 0.000636362 Jy ! Total flux subtracted in 200 components = 0.000636362 Jy ! Clean residual min=-0.005727 max=0.009406 Jy/beam ! Clean residual mean=-0.000004 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 0.299151 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 222 components and 0.299151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090219Jy sigma=0.000834 ! Fit after self-cal, rms=0.090608Jy sigma=0.000832 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090608Jy sigma=0.000832 ! Fit after self-cal, rms=0.092132Jy sigma=0.000826 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.866 mas, bpa=-2.122 degrees ! Estimated noise=483.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446079 Jy ! Component: 100 - total flux cleaned = 0.000875719 Jy ! Component: 150 - total flux cleaned = 0.00125771 Jy ! Component: 200 - total flux cleaned = 0.00146322 Jy ! Total flux subtracted in 200 components = 0.00146322 Jy ! Clean residual min=-0.005651 max=0.008263 Jy/beam ! Clean residual mean=0.000003 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.300615 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 226 components and 0.300615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091996Jy sigma=0.000825 ! Fit after self-cal, rms=0.092160Jy sigma=0.000825 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081687 Jy ! Component: 100 - total flux cleaned = 0.0120978 Jy ! Component: 150 - total flux cleaned = 0.0126631 Jy ! Component: 200 - total flux cleaned = 0.0128507 Jy ! Total flux subtracted in 200 components = 0.0128507 Jy ! Clean residual min=-0.005073 max=0.007811 Jy/beam ! Clean residual mean=0.000002 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.313465 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 271 components and 0.313465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091365Jy sigma=0.000817 ! Fit after self-cal, rms=0.091343Jy sigma=0.000815 ! Inverting map ! Added new window around map position (-42, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781086 Jy ! Component: 100 - total flux cleaned = 0.0124149 Jy ! Component: 150 - total flux cleaned = 0.0151729 Jy ! Component: 200 - total flux cleaned = 0.0167141 Jy ! Total flux subtracted in 200 components = 0.0167141 Jy ! Clean residual min=-0.004206 max=0.005926 Jy/beam ! Clean residual mean=0.000001 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.330179 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 340 components and 0.330179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090567Jy sigma=0.000806 ! Fit after self-cal, rms=0.090450Jy sigma=0.000805 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090450Jy sigma=0.000805 ! Fit after self-cal, rms=0.091773Jy sigma=0.000802 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.824 mas, bpa=-2.236 degrees ! Estimated noise=479.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420273 Jy ! Component: 100 - total flux cleaned = 0.00667466 Jy ! Component: 150 - total flux cleaned = 0.00805875 Jy ! Component: 200 - total flux cleaned = 0.00898382 Jy ! Total flux subtracted in 200 components = 0.00898382 Jy ! Clean residual min=-0.003857 max=0.005116 Jy/beam ! Clean residual mean=0.000002 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.339163 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 378 components and 0.339163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091510Jy sigma=0.000799 ! Fit after self-cal, rms=0.091547Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485842 Jy ! Component: 100 - total flux cleaned = 0.00692265 Jy ! Component: 150 - total flux cleaned = 0.0082589 Jy ! Component: 200 - total flux cleaned = 0.00893794 Jy ! Total flux subtracted in 200 components = 0.00893794 Jy ! Clean residual min=-0.003260 max=0.003776 Jy/beam ! Clean residual mean=0.000002 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.348101 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 405 components and 0.348101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091250Jy sigma=0.000795 ! Fit after self-cal, rms=0.091168Jy sigma=0.000795 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091168Jy sigma=0.000795 ! Fit after self-cal, rms=0.090215Jy sigma=0.000794 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.514 mas, bmaj=14.48 mas, bpa=0.8813 degrees ! Estimated noise=626.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440328 Jy ! Component: 100 - total flux cleaned = 0.00706529 Jy ! Component: 150 - total flux cleaned = 0.00833608 Jy ! Component: 200 - total flux cleaned = 0.00878147 Jy ! Total flux subtracted in 200 components = 0.00878147 Jy ! Clean residual min=-0.004315 max=0.004800 Jy/beam ! Clean residual mean=0.000007 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.356883 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 437 components and 0.356883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090065Jy sigma=0.000792 ! Fit after self-cal, rms=0.090041Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953629 Jy ! Component: 100 - total flux cleaned = 0.00141301 Jy ! Component: 150 - total flux cleaned = 0.00176824 Jy ! Component: 200 - total flux cleaned = 0.0019849 Jy ! Total flux subtracted in 200 components = 0.0019849 Jy ! Clean residual min=-0.004279 max=0.004750 Jy/beam ! Clean residual mean=0.000007 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.358867 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 449 components and 0.358867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089990Jy sigma=0.000791 ! Fit after self-cal, rms=0.089993Jy sigma=0.000791 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.82 mas, bpa=-2.409 degrees ! Estimated noise=472.125 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.82 at -2.409 degrees (North through East) ! Clean map min=-0.0030603 max=0.072177 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=6.438 mas, bpa=-1.663 degrees ! Estimated noise=639.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580407 Jy ! Component: 100 - total flux cleaned = 0.0963113 Jy ! Component: 150 - total flux cleaned = 0.125864 Jy ! Component: 200 - total flux cleaned = 0.150008 Jy ! Total flux subtracted in 200 components = 0.150008 Jy ! Clean residual min=-0.008160 max=0.014662 Jy/beam ! Clean residual mean=0.000041 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.150008 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.150008 Jy ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.82 mas, bpa=-2.409 degrees ! Estimated noise=472.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432348 Jy ! Component: 100 - total flux cleaned = 0.072067 Jy ! Component: 150 - total flux cleaned = 0.0930061 Jy ! Component: 200 - total flux cleaned = 0.109594 Jy ! Total flux subtracted in 200 components = 0.109594 Jy ! Clean residual min=-0.008465 max=0.010543 Jy/beam ! Clean residual mean=0.000024 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 0.259603 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 165 components and 0.259603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.514 mas, bmaj=14.48 mas, bpa=0.8813 degrees ! Estimated noise=626.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252028 Jy ! Component: 100 - total flux cleaned = 0.0424865 Jy ! Component: 150 - total flux cleaned = 0.0549536 Jy ! Component: 200 - total flux cleaned = 0.0643768 Jy ! Total flux subtracted in 200 components = 0.0643768 Jy ! Clean residual min=-0.007518 max=0.007499 Jy/beam ! Clean residual mean=0.000018 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 0.323979 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733383 Jy ! Component: 100 - total flux cleaned = 0.0131285 Jy ! Component: 150 - total flux cleaned = 0.0177557 Jy ! Component: 200 - total flux cleaned = 0.0207865 Jy ! Total flux subtracted in 200 components = 0.0207865 Jy ! Clean residual min=-0.005801 max=0.005308 Jy/beam ! Clean residual mean=0.000011 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.344766 Jy ! Adding 145 model components to the UV plane model. ! The established model now contains 292 components and 0.344766 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.82 mas, bpa=-2.409 degrees ! Estimated noise=472.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027059 Jy ! Component: 100 - total flux cleaned = 0.00357596 Jy ! Component: 150 - total flux cleaned = 0.00389767 Jy ! Component: 200 - total flux cleaned = 0.0046653 Jy ! Total flux subtracted in 200 components = 0.0046653 Jy ! Clean residual min=-0.003593 max=0.003720 Jy/beam ! Clean residual mean=0.000003 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.349431 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 310 components and 0.349431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090344Jy sigma=0.000797 ! Fit after self-cal, rms=0.090282Jy sigma=0.000794 wmodel J1022-1037_S_2015_03_17_pus_map.mod ! Writing 310 model components to file: J1022-1037_S_2015_03_17_pus_map.mod wobs J1022-1037_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1022-1037_S_2015_03_17_pus_uvs.fits wwins J1022-1037_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J1022-1037_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000603632 Jy ! Component: 100 - total flux cleaned = 0.000893452 Jy ! Component: 150 - total flux cleaned = 0.00116334 Jy ! Component: 200 - total flux cleaned = 0.00132022 Jy ! Component: 250 - total flux cleaned = 0.0015709 Jy ! Component: 300 - total flux cleaned = 0.00171626 Jy ! Component: 350 - total flux cleaned = 0.00185739 Jy ! Component: 400 - total flux cleaned = 0.00208561 Jy ! Component: 450 - total flux cleaned = 0.00230615 Jy ! Component: 500 - total flux cleaned = 0.00243484 Jy ! Component: 550 - total flux cleaned = 0.00251922 Jy ! Component: 600 - total flux cleaned = 0.00264402 Jy ! Component: 650 - total flux cleaned = 0.00280542 Jy ! Component: 700 - total flux cleaned = 0.00288541 Jy ! Component: 750 - total flux cleaned = 0.00311866 Jy ! Component: 800 - total flux cleaned = 0.00315701 Jy ! Component: 850 - total flux cleaned = 0.00338055 Jy ! Component: 900 - total flux cleaned = 0.00345255 Jy ! Component: 950 - total flux cleaned = 0.00348843 Jy ! Component: 1000 - total flux cleaned = 0.00355973 Jy ! Component: 1050 - total flux cleaned = 0.00366379 Jy ! Component: 1100 - total flux cleaned = 0.00369782 Jy ! Component: 1150 - total flux cleaned = 0.00383218 Jy ! Component: 1200 - total flux cleaned = 0.00393149 Jy ! Component: 1250 - total flux cleaned = 0.00406213 Jy ! Component: 1300 - total flux cleaned = 0.00415824 Jy ! Component: 1350 - total flux cleaned = 0.00431683 Jy ! Component: 1400 - total flux cleaned = 0.00428582 Jy ! Component: 1450 - total flux cleaned = 0.00434807 Jy ! Component: 1500 - total flux cleaned = 0.00462153 Jy ! Component: 1550 - total flux cleaned = 0.0045615 Jy ! Component: 1600 - total flux cleaned = 0.00459168 Jy ! Component: 1650 - total flux cleaned = 0.00479643 Jy ! Component: 1700 - total flux cleaned = 0.0048258 Jy ! Component: 1750 - total flux cleaned = 0.00505342 Jy ! Component: 1800 - total flux cleaned = 0.00513776 Jy ! Component: 1850 - total flux cleaned = 0.00533215 Jy ! Component: 1900 - total flux cleaned = 0.00541449 Jy ! Component: 1950 - total flux cleaned = 0.00552318 Jy ! Component: 2000 - total flux cleaned = 0.00554984 Jy ! Component: 2050 - total flux cleaned = 0.00568262 Jy ! Component: 2100 - total flux cleaned = 0.00581367 Jy ! Component: 2150 - total flux cleaned = 0.00599498 Jy ! Component: 2200 - total flux cleaned = 0.0060717 Jy ! Component: 2250 - total flux cleaned = 0.00617313 Jy ! Component: 2300 - total flux cleaned = 0.00627337 Jy ! Component: 2350 - total flux cleaned = 0.00634809 Jy ! Component: 2400 - total flux cleaned = 0.00644665 Jy ! Component: 2450 - total flux cleaned = 0.0066166 Jy ! Component: 2500 - total flux cleaned = 0.00668875 Jy ! Component: 2550 - total flux cleaned = 0.00680808 Jy ! Component: 2600 - total flux cleaned = 0.00687882 Jy ! Component: 2650 - total flux cleaned = 0.00697202 Jy ! Component: 2700 - total flux cleaned = 0.00708773 Jy ! Component: 2750 - total flux cleaned = 0.00717959 Jy ! Component: 2800 - total flux cleaned = 0.00733851 Jy ! Component: 2850 - total flux cleaned = 0.00733877 Jy ! Component: 2900 - total flux cleaned = 0.00751707 Jy ! Component: 2950 - total flux cleaned = 0.0075612 Jy ! Component: 3000 - total flux cleaned = 0.0076924 Jy ! Component: 3050 - total flux cleaned = 0.00773571 Jy ! Component: 3100 - total flux cleaned = 0.00784332 Jy ! Component: 3150 - total flux cleaned = 0.00801317 Jy ! Component: 3200 - total flux cleaned = 0.0079287 Jy ! Component: 3250 - total flux cleaned = 0.00807538 Jy ! Component: 3300 - total flux cleaned = 0.00811689 Jy ! Component: 3350 - total flux cleaned = 0.00821994 Jy ! Component: 3400 - total flux cleaned = 0.0083016 Jy ! Component: 3450 - total flux cleaned = 0.00824062 Jy ! Component: 3500 - total flux cleaned = 0.00828085 Jy ! Component: 3550 - total flux cleaned = 0.00834066 Jy ! Component: 3600 - total flux cleaned = 0.00832084 Jy ! Component: 3650 - total flux cleaned = 0.00836008 Jy ! Component: 3700 - total flux cleaned = 0.00843775 Jy ! Component: 3750 - total flux cleaned = 0.00836074 Jy ! Component: 3800 - total flux cleaned = 0.00843733 Jy ! Component: 3850 - total flux cleaned = 0.00839937 Jy ! Component: 3900 - total flux cleaned = 0.00841818 Jy ! Component: 3950 - total flux cleaned = 0.00843706 Jy ! Component: 4000 - total flux cleaned = 0.00838157 Jy ! Component: 4050 - total flux cleaned = 0.00851032 Jy ! Total flux subtracted in 4096 components = 0.00856486 Jy ! Clean residual min=-0.001029 max=0.001027 Jy/beam ! Clean residual mean=-0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.357996 Jy keep ! Adding 376 model components to the UV plane model. ! The established model now contains 686 components and 0.357996 Jy ![Exited script file: muppet] wmap "J1022-1037_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.82 at -2.409 degrees (North through East) ! Clean map min=-0.0023859 max=0.077302 Jy/beam ! Writing clean map to FITS file: J1022-1037_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0773018 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40238 1.40238 2.80477 5.60953 11.2191 22.4381 44.8763 89.7525 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.82 at -2.409 degrees (North through East) ! Clean map min=-0.0023859 max=0.077302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1022-1037_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:25 2016