! Started logfile: J1022-0958_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:20:50 2017 obs J1022-0958_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1022-0958_S_2015_01_23_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793623 visibilities/baseline/integration-bin. ! Found source: J1022-0958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1022-0958_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898122Jy sigma=0.009279 ! Fit after self-cal, rms=0.867015Jy sigma=0.008988 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.193 mas, bpa=2.547 degrees ! Estimated noise=812.984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109441 Jy ! Component: 100 - total flux cleaned = 0.142068 Jy ! Total flux subtracted in 100 components = 0.142068 Jy ! Clean residual min=-0.011574 max=0.013341 Jy/beam ! Clean residual mean=0.000020 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 0.142068 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.142068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234799Jy sigma=0.000929 ! Fit after self-cal, rms=0.234786Jy sigma=0.000928 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.121 mas, bpa=1.722 degrees ! Estimated noise=561.263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158357 Jy ! Component: 100 - total flux cleaned = 0.0228933 Jy ! Component: 150 - total flux cleaned = 0.0253047 Jy ! Component: 200 - total flux cleaned = 0.0256168 Jy ! Total flux subtracted in 200 components = 0.0256168 Jy ! Clean residual min=-0.012419 max=0.013209 Jy/beam ! Clean residual mean=0.000024 rms=0.003226 Jy/beam ! Combined flux in latest and established models = 0.167685 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.167685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232388Jy sigma=0.000913 ! Fit after self-cal, rms=0.232323Jy sigma=0.000912 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.47 HN 0.93 KP 1.04 ! LA 1.38 MK 1.06 NL 1.22 OV 0.92 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.56 HN 0.98 KP 0.95 ! LA 1.36 MK 1.04 NL 1.28 OV 0.97 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.68 HN 0.98 KP 0.82 ! LA 1.09 MK 1.09 NL 1.52 OV 0.87 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.64 HN 0.93 KP 0.78 ! LA 1.16 MK 1.01 NL 0.97 OV 0.95 ! PT 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.232323Jy sigma=0.000912 ! Fit after self-cal, rms=0.149798Jy sigma=0.000861 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.183 mas, bpa=2.073 degrees ! Estimated noise=565.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270259 Jy ! Component: 100 - total flux cleaned = 0.00291079 Jy ! Component: 150 - total flux cleaned = 0.00290531 Jy ! Component: 200 - total flux cleaned = 0.00286468 Jy ! Total flux subtracted in 200 components = 0.00286468 Jy ! Clean residual min=-0.010040 max=0.008031 Jy/beam ! Clean residual mean=0.000041 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 0.170549 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.170549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149676Jy sigma=0.000861 ! Fit after self-cal, rms=0.149726Jy sigma=0.000860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149726Jy sigma=0.000860 ! Fit after self-cal, rms=0.169814Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=8.223 mas, bpa=2.104 degrees ! Estimated noise=568.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225526 Jy ! Component: 100 - total flux cleaned = 0.00270309 Jy ! Component: 150 - total flux cleaned = 0.00294984 Jy ! Component: 200 - total flux cleaned = 0.00300803 Jy ! Total flux subtracted in 200 components = 0.00300803 Jy ! Clean residual min=-0.002367 max=0.003174 Jy/beam ! Clean residual mean=-0.000010 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.173557 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.173557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169734Jy sigma=0.000796 ! Fit after self-cal, rms=0.170249Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291424 Jy ! Component: 100 - total flux cleaned = 0.0035381 Jy ! Component: 150 - total flux cleaned = 0.00348637 Jy ! Component: 200 - total flux cleaned = 0.00348524 Jy ! Total flux subtracted in 200 components = 0.00348524 Jy ! Clean residual min=-0.002119 max=0.002506 Jy/beam ! Clean residual mean=-0.000008 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.177043 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.177043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170189Jy sigma=0.000794 ! Fit after self-cal, rms=0.170166Jy sigma=0.000794 ! Inverting map ! Added new window around map position (1.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212459 Jy ! Component: 100 - total flux cleaned = 0.00228631 Jy ! Component: 150 - total flux cleaned = 0.00220543 Jy ! Component: 200 - total flux cleaned = 0.00213657 Jy ! Total flux subtracted in 200 components = 0.00213657 Jy ! Clean residual min=-0.002086 max=0.002013 Jy/beam ! Clean residual mean=-0.000009 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.179179 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.179179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170112Jy sigma=0.000794 ! Fit after self-cal, rms=0.170109Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170109Jy sigma=0.000793 ! Fit after self-cal, rms=0.181221Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.203 mas, bpa=2.035 degrees ! Estimated noise=573.471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162507 Jy ! Component: 100 - total flux cleaned = 0.00268225 Jy ! Component: 150 - total flux cleaned = 0.00321987 Jy ! Component: 200 - total flux cleaned = 0.00355323 Jy ! Total flux subtracted in 200 components = 0.00355323 Jy ! Clean residual min=-0.001961 max=0.001891 Jy/beam ! Clean residual mean=-0.000007 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.182732 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.182732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181147Jy sigma=0.000793 ! Fit after self-cal, rms=0.181203Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370107 Jy ! Component: 100 - total flux cleaned = 0.000475887 Jy ! Component: 150 - total flux cleaned = 0.000546943 Jy ! Component: 200 - total flux cleaned = 0.000590381 Jy ! Total flux subtracted in 200 components = 0.000590381 Jy ! Clean residual min=-0.001994 max=0.001937 Jy/beam ! Clean residual mean=-0.000007 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.183323 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 117 components and 0.183323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181182Jy sigma=0.000793 ! Fit after self-cal, rms=0.181180Jy sigma=0.000793 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181180Jy sigma=0.000793 ! Fit after self-cal, rms=0.183469Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.269 mas, bmaj=13.37 mas, bpa=0.7731 degrees ! Estimated noise=746.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157737 Jy ! Component: 100 - total flux cleaned = 0.0019275 Jy ! Component: 150 - total flux cleaned = 0.00224283 Jy ! Component: 200 - total flux cleaned = 0.00235147 Jy ! Total flux subtracted in 200 components = 0.00235147 Jy ! Clean residual min=-0.002793 max=0.002492 Jy/beam ! Clean residual mean=-0.000012 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.185674 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 152 components and 0.185674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183402Jy sigma=0.000793 ! Fit after self-cal, rms=0.183409Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414382 Jy ! Component: 100 - total flux cleaned = 0.000488088 Jy ! Component: 150 - total flux cleaned = 0.00055229 Jy ! Component: 200 - total flux cleaned = 0.000564221 Jy ! Total flux subtracted in 200 components = 0.000564221 Jy ! Clean residual min=-0.002874 max=0.002473 Jy/beam ! Clean residual mean=-0.000012 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.186238 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 165 components and 0.186239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183391Jy sigma=0.000793 ! Fit after self-cal, rms=0.183392Jy sigma=0.000793 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.186 mas, bpa=2.022 degrees ! Estimated noise=577.075 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.186 at 2.022 degrees (North through East) ! Clean map min=-0.0020972 max=0.14443 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.298 mas, bpa=2.766 degrees ! Estimated noise=816.617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109854 Jy ! Component: 100 - total flux cleaned = 0.143024 Jy ! Component: 150 - total flux cleaned = 0.157351 Jy ! Component: 200 - total flux cleaned = 0.164754 Jy ! Total flux subtracted in 200 components = 0.164754 Jy ! Clean residual min=-0.003486 max=0.003917 Jy/beam ! Clean residual mean=-0.000000 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.164754 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.164754 Jy ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.186 mas, bpa=2.022 degrees ! Estimated noise=577.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683074 Jy ! Component: 100 - total flux cleaned = 0.0111798 Jy ! Component: 150 - total flux cleaned = 0.0142923 Jy ! Component: 200 - total flux cleaned = 0.0164966 Jy ! Total flux subtracted in 200 components = 0.0164966 Jy ! Clean residual min=-0.002147 max=0.002002 Jy/beam ! Clean residual mean=-0.000004 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.18125 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 0.18125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.269 mas, bmaj=13.37 mas, bpa=0.7731 degrees ! Estimated noise=746.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023047 Jy ! Component: 100 - total flux cleaned = 0.00303032 Jy ! Component: 150 - total flux cleaned = 0.00331138 Jy ! Component: 200 - total flux cleaned = 0.00358291 Jy ! Total flux subtracted in 200 components = 0.00358291 Jy ! Clean residual min=-0.002757 max=0.002407 Jy/beam ! Clean residual mean=-0.000010 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.184833 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227117 Jy ! Component: 100 - total flux cleaned = 0.000392707 Jy ! Component: 150 - total flux cleaned = 0.000536348 Jy ! Component: 200 - total flux cleaned = 0.000641559 Jy ! Total flux subtracted in 200 components = 0.000641559 Jy ! Clean residual min=-0.002865 max=0.002465 Jy/beam ! Clean residual mean=-0.000011 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.185475 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 120 components and 0.185475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.186 mas, bpa=2.022 degrees ! Estimated noise=577.075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240459 Jy ! Component: 100 - total flux cleaned = 0.000309822 Jy ! Component: 150 - total flux cleaned = 0.000428261 Jy ! Component: 200 - total flux cleaned = 0.000585684 Jy ! Total flux subtracted in 200 components = 0.000585684 Jy ! Clean residual min=-0.002231 max=0.001933 Jy/beam ! Clean residual mean=-0.000007 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.186061 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.18606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183390Jy sigma=0.000793 ! Fit after self-cal, rms=0.183382Jy sigma=0.000793 wmodel J1022-0958_S_2015_01_23_pus_map.mod ! Writing 142 model components to file: J1022-0958_S_2015_01_23_pus_map.mod wobs J1022-0958_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1022-0958_S_2015_01_23_pus_uvs.fits wwins J1022-0958_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1022-0958_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217542 Jy ! Component: 100 - total flux cleaned = -0.000458553 Jy ! Component: 150 - total flux cleaned = -0.000653844 Jy ! Component: 200 - total flux cleaned = -0.000779094 Jy ! Component: 250 - total flux cleaned = -0.000960889 Jy ! Component: 300 - total flux cleaned = -0.00110842 Jy ! Component: 350 - total flux cleaned = -0.00131102 Jy ! Component: 400 - total flux cleaned = -0.0014803 Jy ! Component: 450 - total flux cleaned = -0.0016463 Jy ! Component: 500 - total flux cleaned = -0.00183607 Jy ! Component: 550 - total flux cleaned = -0.00207453 Jy ! Component: 600 - total flux cleaned = -0.00223085 Jy ! Component: 650 - total flux cleaned = -0.00243547 Jy ! Component: 700 - total flux cleaned = -0.00261067 Jy ! Component: 750 - total flux cleaned = -0.00266007 Jy ! Component: 800 - total flux cleaned = -0.00275781 Jy ! Component: 850 - total flux cleaned = -0.00282955 Jy ! Component: 900 - total flux cleaned = -0.00287648 Jy ! Component: 950 - total flux cleaned = -0.00294626 Jy ! Component: 1000 - total flux cleaned = -0.00296931 Jy ! Component: 1050 - total flux cleaned = -0.00296964 Jy ! Component: 1100 - total flux cleaned = -0.00301425 Jy ! Component: 1150 - total flux cleaned = -0.00310219 Jy ! Component: 1200 - total flux cleaned = -0.00312372 Jy ! Component: 1250 - total flux cleaned = -0.00320987 Jy ! Component: 1300 - total flux cleaned = -0.00321004 Jy ! Component: 1350 - total flux cleaned = -0.0032732 Jy ! Component: 1400 - total flux cleaned = -0.00337709 Jy ! Component: 1450 - total flux cleaned = -0.00345924 Jy ! Component: 1500 - total flux cleaned = -0.00356097 Jy ! Component: 1550 - total flux cleaned = -0.00372143 Jy ! Component: 1600 - total flux cleaned = -0.00376106 Jy ! Component: 1650 - total flux cleaned = -0.00385952 Jy ! Component: 1700 - total flux cleaned = -0.00397589 Jy ! Component: 1750 - total flux cleaned = -0.00397594 Jy ! Component: 1800 - total flux cleaned = -0.004033 Jy ! Component: 1850 - total flux cleaned = -0.00410847 Jy ! Component: 1900 - total flux cleaned = -0.00412729 Jy ! Component: 1950 - total flux cleaned = -0.00425674 Jy ! Component: 2000 - total flux cleaned = -0.00429349 Jy ! Component: 2050 - total flux cleaned = -0.0043841 Jy ! Component: 2100 - total flux cleaned = -0.00445587 Jy ! Component: 2150 - total flux cleaned = -0.00447386 Jy ! Component: 2200 - total flux cleaned = -0.0045796 Jy ! Component: 2250 - total flux cleaned = -0.00464948 Jy ! Component: 2300 - total flux cleaned = -0.00471899 Jy ! Component: 2350 - total flux cleaned = -0.00485637 Jy ! Component: 2400 - total flux cleaned = -0.00489044 Jy ! Component: 2450 - total flux cleaned = -0.00502546 Jy ! Component: 2500 - total flux cleaned = -0.00510915 Jy ! Component: 2550 - total flux cleaned = -0.00515885 Jy ! Component: 2600 - total flux cleaned = -0.00524111 Jy ! Component: 2650 - total flux cleaned = -0.00530638 Jy ! Component: 2700 - total flux cleaned = -0.00537111 Jy ! Component: 2750 - total flux cleaned = -0.00543535 Jy ! Component: 2800 - total flux cleaned = -0.00556286 Jy ! Component: 2850 - total flux cleaned = -0.00559468 Jy ! Component: 2900 - total flux cleaned = -0.00570446 Jy ! Component: 2950 - total flux cleaned = -0.00576679 Jy ! Component: 3000 - total flux cleaned = -0.00582867 Jy ! Component: 3050 - total flux cleaned = -0.00589002 Jy ! Component: 3100 - total flux cleaned = -0.00593588 Jy ! Component: 3150 - total flux cleaned = -0.00601155 Jy ! Component: 3200 - total flux cleaned = -0.00607153 Jy ! Component: 3250 - total flux cleaned = -0.006161 Jy ! Component: 3300 - total flux cleaned = -0.00620535 Jy ! Component: 3350 - total flux cleaned = -0.00623471 Jy ! Component: 3400 - total flux cleaned = -0.00627859 Jy ! Component: 3450 - total flux cleaned = -0.00635125 Jy ! Component: 3500 - total flux cleaned = -0.0063945 Jy ! Component: 3550 - total flux cleaned = -0.00645183 Jy ! Component: 3600 - total flux cleaned = -0.00649443 Jy ! Component: 3650 - total flux cleaned = -0.00657913 Jy ! Component: 3700 - total flux cleaned = -0.00659302 Jy ! Component: 3750 - total flux cleaned = -0.00664876 Jy ! Component: 3800 - total flux cleaned = -0.00666265 Jy ! Component: 3850 - total flux cleaned = -0.00673155 Jy ! Component: 3900 - total flux cleaned = -0.00671804 Jy ! Component: 3950 - total flux cleaned = -0.00681337 Jy ! Component: 4000 - total flux cleaned = -0.00684037 Jy ! Component: 4050 - total flux cleaned = -0.00684044 Jy ! Total flux subtracted in 4096 components = -0.00690735 Jy ! Clean residual min=-0.000755 max=0.000761 Jy/beam ! Clean residual mean=-0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.179153 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 422 components and 0.179153 Jy ![Exited script file: muppet] wmap "J1022-0958_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.186 at 2.022 degrees (North through East) ! Clean map min=-0.0018244 max=0.14547 Jy/beam ! Writing clean map to FITS file: J1022-0958_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.527586 0.527586 1.05517 2.11034 4.22069 8.44138 16.8828 33.7655 67.531 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.186 at 2.022 degrees (North through East) ! Clean map min=-0.0018244 max=0.14547 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1022-0958_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:20:56 2017