! Started logfile: J1022-0443_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:20:44 2017 obs J1022-0443_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1022-0443_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87122 visibilities/baseline/integration-bin. ! Found source: J1022-0443 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 19132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1022-0443_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958851Jy sigma=0.009852 ! Fit after self-cal, rms=0.931798Jy sigma=0.009685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=6.654 mas, bpa=0.211 degrees ! Estimated noise=703.807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563986 Jy ! Component: 100 - total flux cleaned = 0.0692511 Jy ! Total flux subtracted in 100 components = 0.0692511 Jy ! Clean residual min=-0.003613 max=0.004840 Jy/beam ! Clean residual mean=0.000006 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0692511 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0692511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167457Jy sigma=0.000794 ! Fit after self-cal, rms=0.167385Jy sigma=0.000794 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.911 mas, bpa=1.128 degrees ! Estimated noise=528.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678077 Jy ! Component: 100 - total flux cleaned = 0.00983648 Jy ! Component: 150 - total flux cleaned = 0.0113992 Jy ! Component: 200 - total flux cleaned = 0.0122673 Jy ! Total flux subtracted in 200 components = 0.0122673 Jy ! Clean residual min=-0.003193 max=0.002729 Jy/beam ! Clean residual mean=0.000006 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0815184 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.0815184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166704Jy sigma=0.000792 ! Fit after self-cal, rms=0.166691Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.60 HN 1.02 KP 1.12 ! LA 1.02 MK 1.02 NL 1.17 OV 1.00 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.74 HN 1.03 KP 1.05 ! LA 0.98 MK 1.05 NL 1.22 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.84 HN 1.07 KP 0.92 ! LA 0.81 MK 1.02 NL 1.24 OV 0.96 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.78 HN 0.93 KP 0.85 ! LA 0.84 MK 1.00 NL 1.03 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.166691Jy sigma=0.000791 ! Fit after self-cal, rms=0.129468Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.994 mas, bpa=1.237 degrees ! Estimated noise=534.479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710207 Jy ! Component: 100 - total flux cleaned = 0.000815314 Jy ! Component: 150 - total flux cleaned = 0.000856859 Jy ! Component: 200 - total flux cleaned = 0.000868656 Jy ! Total flux subtracted in 200 components = 0.000868656 Jy ! Clean residual min=-0.001850 max=0.002045 Jy/beam ! Clean residual mean=0.000001 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0823871 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0823871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129451Jy sigma=0.000784 ! Fit after self-cal, rms=0.129268Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129268Jy sigma=0.000784 ! Fit after self-cal, rms=0.114322Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.01 mas, bpa=1.323 degrees ! Estimated noise=534.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214621 Jy ! Component: 100 - total flux cleaned = 0.00025527 Jy ! Component: 150 - total flux cleaned = 0.000272875 Jy ! Component: 200 - total flux cleaned = 0.000297032 Jy ! Total flux subtracted in 200 components = 0.000297032 Jy ! Clean residual min=-0.001650 max=0.001612 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0826841 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.0826841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114320Jy sigma=0.000782 ! Fit after self-cal, rms=0.114255Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.29089e-05 Jy ! Component: 100 - total flux cleaned = 4.95332e-05 Jy ! Component: 150 - total flux cleaned = 6.33271e-05 Jy ! Component: 200 - total flux cleaned = 7.60903e-05 Jy ! Total flux subtracted in 200 components = 7.60903e-05 Jy ! Clean residual min=-0.001636 max=0.001552 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0827602 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.0827602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114253Jy sigma=0.000782 ! Fit after self-cal, rms=0.114253Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114253Jy sigma=0.000782 ! Fit after self-cal, rms=0.113912Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.01 mas, bpa=1.306 degrees ! Estimated noise=535.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187726 Jy ! Component: 100 - total flux cleaned = 0.000224869 Jy ! Component: 150 - total flux cleaned = 0.000244319 Jy ! Component: 200 - total flux cleaned = 0.00026218 Jy ! Total flux subtracted in 200 components = 0.00026218 Jy ! Clean residual min=-0.001621 max=0.001533 Jy/beam ! Clean residual mean=0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0830223 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.0830223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113910Jy sigma=0.000782 ! Fit after self-cal, rms=0.113906Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00215e-05 Jy ! Component: 100 - total flux cleaned = 2.16004e-05 Jy ! Component: 150 - total flux cleaned = 2.66192e-05 Jy ! Component: 200 - total flux cleaned = 3.62969e-05 Jy ! Total flux subtracted in 200 components = 3.62969e-05 Jy ! Clean residual min=-0.001615 max=0.001526 Jy/beam ! Clean residual mean=0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0830586 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.0830586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113906Jy sigma=0.000782 ! Fit after self-cal, rms=0.113906Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113906Jy sigma=0.000782 ! Fit after self-cal, rms=0.114128Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.483 mas, bmaj=12.88 mas, bpa=0.4685 degrees ! Estimated noise=687.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312002 Jy ! Component: 100 - total flux cleaned = 0.000312733 Jy ! Component: 150 - total flux cleaned = 0.000284586 Jy ! Component: 200 - total flux cleaned = 0.000259774 Jy ! Total flux subtracted in 200 components = 0.000259774 Jy ! Clean residual min=-0.001589 max=0.002064 Jy/beam ! Clean residual mean=0.000001 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0833184 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 65 components and 0.0833184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114127Jy sigma=0.000782 ! Fit after self-cal, rms=0.114126Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-128, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127188 Jy ! Component: 100 - total flux cleaned = 0.00127596 Jy ! Component: 150 - total flux cleaned = 0.00125332 Jy ! Component: 200 - total flux cleaned = 0.00127333 Jy ! Total flux subtracted in 200 components = 0.00127333 Jy ! Clean residual min=-0.001382 max=0.001492 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0845917 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 98 components and 0.0845917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114098Jy sigma=0.000782 ! Fit after self-cal, rms=0.114085Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.011 mas, bpa=1.285 degrees ! Estimated noise=537.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.38 x 8.011 at 1.285 degrees (North through East) ! Clean map min=-0.0015132 max=0.07467 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=6.746 mas, bpa=0.3644 degrees ! Estimated noise=719.131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574091 Jy ! Component: 100 - total flux cleaned = 0.0704995 Jy ! Component: 150 - total flux cleaned = 0.0759707 Jy ! Component: 200 - total flux cleaned = 0.0786589 Jy ! Total flux subtracted in 200 components = 0.0786589 Jy ! Clean residual min=-0.002259 max=0.001949 Jy/beam ! Clean residual mean=0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0786589 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0786589 Jy ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.011 mas, bpa=1.285 degrees ! Estimated noise=537.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023652 Jy ! Component: 100 - total flux cleaned = 0.00389659 Jy ! Component: 150 - total flux cleaned = 0.00454263 Jy ! Component: 200 - total flux cleaned = 0.00484032 Jy ! Total flux subtracted in 200 components = 0.00484032 Jy ! Clean residual min=-0.001619 max=0.001594 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0834992 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 58 components and 0.0834992 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.483 mas, bmaj=12.88 mas, bpa=0.4685 degrees ! Estimated noise=687.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000962547 Jy ! Component: 100 - total flux cleaned = 0.00108104 Jy ! Component: 150 - total flux cleaned = 0.00115178 Jy ! Component: 200 - total flux cleaned = 0.00122811 Jy ! Total flux subtracted in 200 components = 0.00122811 Jy ! Clean residual min=-0.001485 max=0.001508 Jy/beam ! Clean residual mean=0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0847273 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.88715e-05 Jy ! Component: 100 - total flux cleaned = 0.000117048 Jy ! Component: 150 - total flux cleaned = 0.000146166 Jy ! Component: 200 - total flux cleaned = 0.000159571 Jy ! Total flux subtracted in 200 components = 0.000159571 Jy ! Clean residual min=-0.001464 max=0.001492 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0848869 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 93 components and 0.0848869 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.011 mas, bpa=1.285 degrees ! Estimated noise=537.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.06629e-05 Jy ! Component: 100 - total flux cleaned = 0.00017982 Jy ! Component: 150 - total flux cleaned = 0.000298206 Jy ! Component: 200 - total flux cleaned = 0.000364032 Jy ! Total flux subtracted in 200 components = 0.000364032 Jy ! Clean residual min=-0.001514 max=0.001551 Jy/beam ! Clean residual mean=-0.000000 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0852509 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.0852509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114059Jy sigma=0.000782 ! Fit after self-cal, rms=0.114055Jy sigma=0.000782 wmodel J1022-0443_S_2015_01_23_pus_map.mod ! Writing 115 model components to file: J1022-0443_S_2015_01_23_pus_map.mod wobs J1022-0443_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1022-0443_S_2015_01_23_pus_uvs.fits wwins J1022-0443_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1022-0443_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.62934e-06 Jy ! Component: 100 - total flux cleaned = 7.67619e-05 Jy ! Component: 150 - total flux cleaned = -1.50965e-05 Jy ! Component: 200 - total flux cleaned = -0.000102872 Jy ! Component: 250 - total flux cleaned = -0.000252173 Jy ! Component: 300 - total flux cleaned = -0.000356028 Jy ! Component: 350 - total flux cleaned = -0.000437402 Jy ! Component: 400 - total flux cleaned = -0.000536566 Jy ! Component: 450 - total flux cleaned = -0.000613977 Jy ! Component: 500 - total flux cleaned = -0.000670818 Jy ! Component: 550 - total flux cleaned = -0.000670654 Jy ! Component: 600 - total flux cleaned = -0.000706923 Jy ! Component: 650 - total flux cleaned = -0.000652505 Jy ! Component: 700 - total flux cleaned = -0.000652824 Jy ! Component: 750 - total flux cleaned = -0.000722635 Jy ! Component: 800 - total flux cleaned = -0.000722535 Jy ! Component: 850 - total flux cleaned = -0.000756395 Jy ! Component: 900 - total flux cleaned = -0.000839505 Jy ! Component: 950 - total flux cleaned = -0.000839354 Jy ! Component: 1000 - total flux cleaned = -0.000871917 Jy ! Component: 1050 - total flux cleaned = -0.000888182 Jy ! Component: 1100 - total flux cleaned = -0.000951433 Jy ! Component: 1150 - total flux cleaned = -0.000967296 Jy ! Component: 1200 - total flux cleaned = -0.000998419 Jy ! Component: 1250 - total flux cleaned = -0.00102911 Jy ! Component: 1300 - total flux cleaned = -0.00105915 Jy ! Component: 1350 - total flux cleaned = -0.00108906 Jy ! Component: 1400 - total flux cleaned = -0.00113321 Jy ! Component: 1450 - total flux cleaned = -0.00110409 Jy ! Component: 1500 - total flux cleaned = -0.00119053 Jy ! Component: 1550 - total flux cleaned = -0.00121907 Jy ! Component: 1600 - total flux cleaned = -0.00123305 Jy ! Component: 1650 - total flux cleaned = -0.00124717 Jy ! Component: 1700 - total flux cleaned = -0.00128887 Jy ! Component: 1750 - total flux cleaned = -0.0013299 Jy ! Component: 1800 - total flux cleaned = -0.00135698 Jy ! Component: 1850 - total flux cleaned = -0.00139731 Jy ! Component: 1900 - total flux cleaned = -0.00145037 Jy ! Component: 1950 - total flux cleaned = -0.00148976 Jy ! Component: 2000 - total flux cleaned = -0.00145078 Jy ! Component: 2050 - total flux cleaned = -0.00148946 Jy ! Component: 2100 - total flux cleaned = -0.00151498 Jy ! Component: 2150 - total flux cleaned = -0.00146439 Jy ! Component: 2200 - total flux cleaned = -0.00153955 Jy ! Component: 2250 - total flux cleaned = -0.0015022 Jy ! Component: 2300 - total flux cleaned = -0.00146527 Jy ! Component: 2350 - total flux cleaned = -0.00148982 Jy ! Component: 2400 - total flux cleaned = -0.00144137 Jy ! Component: 2450 - total flux cleaned = -0.0014895 Jy ! Component: 2500 - total flux cleaned = -0.00150135 Jy ! Component: 2550 - total flux cleaned = -0.00150141 Jy ! Component: 2600 - total flux cleaned = -0.00150144 Jy ! Component: 2650 - total flux cleaned = -0.00148995 Jy ! Component: 2700 - total flux cleaned = -0.00151308 Jy ! Component: 2750 - total flux cleaned = -0.00151308 Jy ! Component: 2800 - total flux cleaned = -0.00154706 Jy ! Component: 2850 - total flux cleaned = -0.00155827 Jy ! Component: 2900 - total flux cleaned = -0.00154711 Jy ! Component: 2950 - total flux cleaned = -0.00155827 Jy ! Component: 3000 - total flux cleaned = -0.00160246 Jy ! Component: 3050 - total flux cleaned = -0.00161343 Jy ! Component: 3100 - total flux cleaned = -0.00163518 Jy ! Component: 3150 - total flux cleaned = -0.00162437 Jy ! Component: 3200 - total flux cleaned = -0.00163509 Jy ! Component: 3250 - total flux cleaned = -0.00167758 Jy ! Component: 3300 - total flux cleaned = -0.00164593 Jy ! Component: 3350 - total flux cleaned = -0.00164607 Jy ! Component: 3400 - total flux cleaned = -0.00163556 Jy ! Component: 3450 - total flux cleaned = -0.0016459 Jy ! Component: 3500 - total flux cleaned = -0.00165611 Jy ! Component: 3550 - total flux cleaned = -0.00161506 Jy ! Component: 3600 - total flux cleaned = -0.00160494 Jy ! Component: 3650 - total flux cleaned = -0.00164531 Jy ! Component: 3700 - total flux cleaned = -0.00160515 Jy ! Component: 3750 - total flux cleaned = -0.00157532 Jy ! Component: 3800 - total flux cleaned = -0.00159507 Jy ! Component: 3850 - total flux cleaned = -0.00157535 Jy ! Component: 3900 - total flux cleaned = -0.0016047 Jy ! Component: 3950 - total flux cleaned = -0.00158531 Jy ! Component: 4000 - total flux cleaned = -0.00156598 Jy ! Component: 4050 - total flux cleaned = -0.0015469 Jy ! Total flux subtracted in 4096 components = -0.00153735 Jy ! Clean residual min=-0.000610 max=0.000540 Jy/beam ! Clean residual mean=-0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0837136 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 388 components and 0.0837135 Jy ![Exited script file: muppet] wmap "J1022-0443_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.38 x 8.011 at 1.285 degrees (North through East) ! Clean map min=-0.0015666 max=0.075027 Jy/beam ! Writing clean map to FITS file: J1022-0443_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0750274 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174985 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.699683 0.699683 1.39937 2.79873 5.59746 11.1949 22.3899 44.7797 89.5594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.38 x 8.011 at 1.285 degrees (North through East) ! Clean map min=-0.0015666 max=0.075027 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1022-0443_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:20:50 2017