! Started logfile: J1016+0513_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:20:39 2017 obs J1016+0513_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2015_01_23_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.807407 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 4360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905935Jy sigma=0.009848 ! Fit after self-cal, rms=0.886502Jy sigma=0.009768 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.535 mas, bpa=-9.159 degrees ! Estimated noise=1334.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0929082 Jy ! Component: 100 - total flux cleaned = 0.11496 Jy ! Total flux subtracted in 100 components = 0.11496 Jy ! Clean residual min=-0.006280 max=0.009580 Jy/beam ! Clean residual mean=0.000007 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.11496 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.11496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108367Jy sigma=0.000846 ! Fit after self-cal, rms=0.108340Jy sigma=0.000846 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=8.728 mas, bpa=-9.361 degrees ! Estimated noise=1023.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111905 Jy ! Component: 100 - total flux cleaned = 0.0165156 Jy ! Component: 150 - total flux cleaned = 0.0195054 Jy ! Component: 200 - total flux cleaned = 0.0214206 Jy ! Total flux subtracted in 200 components = 0.0214206 Jy ! Clean residual min=-0.006463 max=0.009446 Jy/beam ! Clean residual mean=-0.000003 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.13638 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.13638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107748Jy sigma=0.000827 ! Fit after self-cal, rms=0.107741Jy sigma=0.000827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.73 HN 0.98 KP 1.06 ! LA 0.93 MK 1.00 NL 0.94 OV 0.96 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 2.47 HN 1.01 KP 0.96 ! LA 0.94 MK 0.98 NL 1.15 OV 0.98 ! PT 0.95 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 2.42 HN 1.04 KP 0.84 ! LA 0.72 MK 1.07 NL 1.63 OV 0.89 ! PT 0.96 SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 2.00 HN 1.00 KP 0.80 ! LA 0.81 MK 1.01 NL 1.02 OV 0.96 ! PT 0.99 SC 0.94 ! ! ! Fit before self-cal, rms=0.107741Jy sigma=0.000827 ! Fit after self-cal, rms=0.181615Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=8.845 mas, bpa=-9.55 degrees ! Estimated noise=1037.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998556 Jy ! Component: 100 - total flux cleaned = 0.00103564 Jy ! Component: 150 - total flux cleaned = 0.000982692 Jy ! Component: 200 - total flux cleaned = 0.000940008 Jy ! Total flux subtracted in 200 components = 0.000940008 Jy ! Clean residual min=-0.003817 max=0.003892 Jy/beam ! Clean residual mean=-0.000012 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.13732 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.13732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181552Jy sigma=0.000776 ! Fit after self-cal, rms=0.181886Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181886Jy sigma=0.000775 ! Fit after self-cal, rms=0.152640Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.873 mas, bpa=-9.522 degrees ! Estimated noise=1036.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263552 Jy ! Component: 100 - total flux cleaned = -0.00028355 Jy ! Component: 150 - total flux cleaned = -0.000283557 Jy ! Component: 200 - total flux cleaned = -0.000299696 Jy ! Total flux subtracted in 200 components = -0.000299696 Jy ! Clean residual min=-0.003160 max=0.003430 Jy/beam ! Clean residual mean=-0.000003 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.137021 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.137021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152635Jy sigma=0.000763 ! Fit after self-cal, rms=0.152614Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06325e-05 Jy ! Component: 100 - total flux cleaned = -7.00427e-05 Jy ! Component: 150 - total flux cleaned = -8.301e-05 Jy ! Component: 200 - total flux cleaned = -9.53056e-05 Jy ! Total flux subtracted in 200 components = -9.53056e-05 Jy ! Clean residual min=-0.003130 max=0.003395 Jy/beam ! Clean residual mean=-0.000003 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.136925 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.136925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152612Jy sigma=0.000763 ! Fit after self-cal, rms=0.152610Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152610Jy sigma=0.000763 ! Fit after self-cal, rms=0.152954Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=8.885 mas, bpa=-9.561 degrees ! Estimated noise=1037.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.31608e-06 Jy ! Component: 100 - total flux cleaned = -3.42587e-05 Jy ! Component: 150 - total flux cleaned = -4.61577e-05 Jy ! Component: 200 - total flux cleaned = -5.78986e-05 Jy ! Total flux subtracted in 200 components = -5.78986e-05 Jy ! Clean residual min=-0.003086 max=0.003363 Jy/beam ! Clean residual mean=-0.000003 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.136867 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.136867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152953Jy sigma=0.000763 ! Fit after self-cal, rms=0.152954Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.50634e-05 Jy ! Component: 100 - total flux cleaned = -2.62533e-05 Jy ! Component: 150 - total flux cleaned = -3.60594e-05 Jy ! Component: 200 - total flux cleaned = -3.58763e-05 Jy ! Total flux subtracted in 200 components = -3.58763e-05 Jy ! Clean residual min=-0.003064 max=0.003350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.136832 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.136832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152953Jy sigma=0.000763 ! Fit after self-cal, rms=0.152952Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152952Jy sigma=0.000763 ! Fit after self-cal, rms=0.153080Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.427 mas, bmaj=12.62 mas, bpa=-10.32 degrees ! Estimated noise=1268.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019318 Jy ! Component: 100 - total flux cleaned = -0.000208636 Jy ! Component: 150 - total flux cleaned = -0.000223069 Jy ! Component: 200 - total flux cleaned = -0.000247288 Jy ! Total flux subtracted in 200 components = -0.000247288 Jy ! Clean residual min=-0.003706 max=0.004024 Jy/beam ! Clean residual mean=-0.000006 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.136584 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 0.136584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153077Jy sigma=0.000763 ! Fit after self-cal, rms=0.153076Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.31052e-05 Jy ! Component: 100 - total flux cleaned = -3.40566e-05 Jy ! Component: 150 - total flux cleaned = -6.26519e-05 Jy ! Component: 200 - total flux cleaned = -8.90053e-05 Jy ! Total flux subtracted in 200 components = -8.90053e-05 Jy ! Clean residual min=-0.003706 max=0.003982 Jy/beam ! Clean residual mean=-0.000006 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.136495 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.136495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153075Jy sigma=0.000763 ! Fit after self-cal, rms=0.153074Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.894 mas, bpa=-9.609 degrees ! Estimated noise=1037.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.894 at -9.609 degrees (North through East) ! Clean map min=-0.0029985 max=0.12246 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=7.674 mas, bpa=-9.49 degrees ! Estimated noise=1346.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.093603 Jy ! Component: 100 - total flux cleaned = 0.115062 Jy ! Component: 150 - total flux cleaned = 0.123494 Jy ! Component: 200 - total flux cleaned = 0.128434 Jy ! Total flux subtracted in 200 components = 0.128434 Jy ! Clean residual min=-0.003844 max=0.004660 Jy/beam ! Clean residual mean=0.000003 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.128434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.128434 Jy ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.894 mas, bpa=-9.609 degrees ! Estimated noise=1037.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402081 Jy ! Component: 100 - total flux cleaned = 0.0060555 Jy ! Component: 150 - total flux cleaned = 0.00694735 Jy ! Component: 200 - total flux cleaned = 0.00726092 Jy ! Total flux subtracted in 200 components = 0.00726092 Jy ! Clean residual min=-0.003110 max=0.003339 Jy/beam ! Clean residual mean=-0.000002 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.135695 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.135695 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.427 mas, bmaj=12.62 mas, bpa=-10.32 degrees ! Estimated noise=1268.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440908 Jy ! Component: 100 - total flux cleaned = 0.000555284 Jy ! Component: 150 - total flux cleaned = 0.000626299 Jy ! Component: 200 - total flux cleaned = 0.000697052 Jy ! Total flux subtracted in 200 components = 0.000697052 Jy ! Clean residual min=-0.003722 max=0.004000 Jy/beam ! Clean residual mean=-0.000005 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.136392 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.37394e-05 Jy ! Component: 100 - total flux cleaned = 3.4928e-05 Jy ! Component: 150 - total flux cleaned = 5.50809e-05 Jy ! Component: 200 - total flux cleaned = 7.39759e-05 Jy ! Total flux subtracted in 200 components = 7.39759e-05 Jy ! Clean residual min=-0.003702 max=0.003975 Jy/beam ! Clean residual mean=-0.000006 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.136466 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.136466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.894 mas, bpa=-9.609 degrees ! Estimated noise=1037.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229401 Jy ! Component: 100 - total flux cleaned = 0.000251537 Jy ! Component: 150 - total flux cleaned = 0.000288473 Jy ! Component: 200 - total flux cleaned = 0.000273647 Jy ! Total flux subtracted in 200 components = 0.000273647 Jy ! Clean residual min=-0.003049 max=0.003366 Jy/beam ! Clean residual mean=-0.000003 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.13674 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.13674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153083Jy sigma=0.000763 ! Fit after self-cal, rms=0.153085Jy sigma=0.000763 wmodel J1016+0513_S_2015_01_23_pus_map.mod ! Writing 74 model components to file: J1016+0513_S_2015_01_23_pus_map.mod wobs J1016+0513_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2015_01_23_pus_uvs.fits wwins J1016+0513_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1016+0513_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119332 Jy ! Component: 100 - total flux cleaned = 0.00141785 Jy ! Component: 150 - total flux cleaned = 0.00157217 Jy ! Component: 200 - total flux cleaned = 0.0018208 Jy ! Component: 250 - total flux cleaned = 0.00196338 Jy ! Component: 300 - total flux cleaned = 0.00200907 Jy ! Component: 350 - total flux cleaned = 0.00200804 Jy ! Component: 400 - total flux cleaned = 0.00200714 Jy ! Component: 450 - total flux cleaned = 0.0019232 Jy ! Component: 500 - total flux cleaned = 0.00171558 Jy ! Component: 550 - total flux cleaned = 0.00143216 Jy ! Component: 600 - total flux cleaned = 0.00131215 Jy ! Component: 650 - total flux cleaned = 0.000921025 Jy ! Component: 700 - total flux cleaned = 0.000652674 Jy ! Component: 750 - total flux cleaned = 0.00038942 Jy ! Component: 800 - total flux cleaned = 0.000204393 Jy ! Component: 850 - total flux cleaned = 5.8511e-05 Jy ! Component: 900 - total flux cleaned = -0.000264347 Jy ! Component: 950 - total flux cleaned = -0.000369873 Jy ! Component: 1000 - total flux cleaned = -0.000613893 Jy ! Component: 1050 - total flux cleaned = -0.000956471 Jy ! Component: 1100 - total flux cleaned = -0.00119299 Jy ! Component: 1150 - total flux cleaned = -0.00135999 Jy ! Component: 1200 - total flux cleaned = -0.00155764 Jy ! Component: 1250 - total flux cleaned = -0.00181752 Jy ! Component: 1300 - total flux cleaned = -0.00191319 Jy ! Component: 1350 - total flux cleaned = -0.00210301 Jy ! Component: 1400 - total flux cleaned = -0.00222803 Jy ! Component: 1450 - total flux cleaned = -0.00232061 Jy ! Component: 1500 - total flux cleaned = -0.00256565 Jy ! Component: 1550 - total flux cleaned = -0.002778 Jy ! Component: 1600 - total flux cleaned = -0.002988 Jy ! Component: 1650 - total flux cleaned = -0.00304736 Jy ! Component: 1700 - total flux cleaned = -0.0033418 Jy ! Component: 1750 - total flux cleaned = -0.0034872 Jy ! Component: 1800 - total flux cleaned = -0.00351603 Jy ! Component: 1850 - total flux cleaned = -0.00371667 Jy ! Component: 1900 - total flux cleaned = -0.00380198 Jy ! Component: 1950 - total flux cleaned = -0.00394299 Jy ! Component: 2000 - total flux cleaned = -0.00405462 Jy ! Component: 2050 - total flux cleaned = -0.00416483 Jy ! Component: 2100 - total flux cleaned = -0.00430184 Jy ! Component: 2150 - total flux cleaned = -0.004519 Jy ! Component: 2200 - total flux cleaned = -0.00459954 Jy ! Component: 2250 - total flux cleaned = -0.00470598 Jy ! Component: 2300 - total flux cleaned = -0.00467937 Jy ! Component: 2350 - total flux cleaned = -0.0046793 Jy ! Component: 2400 - total flux cleaned = -0.00480964 Jy ! Component: 2450 - total flux cleaned = -0.00486127 Jy ! Component: 2500 - total flux cleaned = -0.0048353 Jy ! Component: 2550 - total flux cleaned = -0.00488627 Jy ! Component: 2600 - total flux cleaned = -0.0049374 Jy ! Component: 2650 - total flux cleaned = -0.00506277 Jy ! Component: 2700 - total flux cleaned = -0.00503774 Jy ! Component: 2750 - total flux cleaned = -0.0051862 Jy ! Component: 2800 - total flux cleaned = -0.00518622 Jy ! Component: 2850 - total flux cleaned = -0.00533273 Jy ! Component: 2900 - total flux cleaned = -0.00535722 Jy ! Component: 2950 - total flux cleaned = -0.00547774 Jy ! Component: 3000 - total flux cleaned = -0.00554963 Jy ! Component: 3050 - total flux cleaned = -0.00564478 Jy ! Component: 3100 - total flux cleaned = -0.00581017 Jy ! Component: 3150 - total flux cleaned = -0.00581015 Jy ! Component: 3200 - total flux cleaned = -0.00576336 Jy ! Component: 3250 - total flux cleaned = -0.00590262 Jy ! Component: 3300 - total flux cleaned = -0.0059256 Jy ! Component: 3350 - total flux cleaned = -0.00601729 Jy ! Component: 3400 - total flux cleaned = -0.00606282 Jy ! Component: 3450 - total flux cleaned = -0.00617597 Jy ! Component: 3500 - total flux cleaned = -0.00613115 Jy ! Component: 3550 - total flux cleaned = -0.00626538 Jy ! Component: 3600 - total flux cleaned = -0.00624304 Jy ! Component: 3650 - total flux cleaned = -0.00630952 Jy ! Component: 3700 - total flux cleaned = -0.00635362 Jy ! Component: 3750 - total flux cleaned = -0.00644082 Jy ! Component: 3800 - total flux cleaned = -0.00646261 Jy ! Component: 3850 - total flux cleaned = -0.00659228 Jy ! Component: 3900 - total flux cleaned = -0.00659235 Jy ! Component: 3950 - total flux cleaned = -0.00654956 Jy ! Component: 4000 - total flux cleaned = -0.00663464 Jy ! Component: 4050 - total flux cleaned = -0.00661348 Jy ! Total flux subtracted in 4096 components = -0.00661356 Jy ! Clean residual min=-0.001245 max=0.001336 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.130126 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 380 components and 0.130126 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.894 at -9.609 degrees (North through East) ! Clean map min=-0.0022797 max=0.12283 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000395649 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.966348 0.966348 1.9327 3.86539 7.73078 15.4616 30.9231 61.8463 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.894 at -9.609 degrees (North through East) ! Clean map min=-0.0022797 max=0.12283 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:20:44 2017