! Started logfile: J1016+0513_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:31:54 2016 obs J1016+0513_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2014_12_20_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894017 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 2092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871094Jy sigma=0.009533 ! Fit after self-cal, rms=0.862625Jy sigma=0.009502 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=6.88 mas, bpa=-1.671 degrees ! Estimated noise=1715.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106142 Jy ! Component: 100 - total flux cleaned = 0.133116 Jy ! Total flux subtracted in 100 components = 0.133116 Jy ! Clean residual min=-0.007630 max=0.010964 Jy/beam ! Clean residual mean=0.000020 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.133116 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.133116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095797Jy sigma=0.000811 ! Fit after self-cal, rms=0.095808Jy sigma=0.000811 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.674 mas, bpa=-0.9038 degrees ! Estimated noise=1445.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150621 Jy ! Component: 100 - total flux cleaned = 0.0223555 Jy ! Component: 150 - total flux cleaned = 0.0267142 Jy ! Component: 200 - total flux cleaned = 0.0295731 Jy ! Total flux subtracted in 200 components = 0.0295731 Jy ! Clean residual min=-0.006621 max=0.005544 Jy/beam ! Clean residual mean=0.000019 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.162689 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.162689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093212Jy sigma=0.000783 ! Fit after self-cal, rms=0.093244Jy sigma=0.000783 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.78 HN 0.97 KP 1.12 ! LA 0.97 MK 0.99 NL 1.06 OV 1.01 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 1.07 KP 1.06 ! LA 0.91 MK 0.97 NL 0.88 OV 1.05 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.03 KP 0.94 ! LA 0.80 MK 1.04 NL 1.15 OV 0.89 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.99 KP 0.92 ! LA 0.78 MK 1.09 NL 1.08 OV 1.06 ! PT 1.06 SC 0.97 ! ! ! Fit before self-cal, rms=0.093244Jy sigma=0.000783 ! Fit after self-cal, rms=0.087999Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.756 mas, bpa=-0.7133 degrees ! Estimated noise=1444.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000411639 Jy ! Component: 100 - total flux cleaned = -0.000464541 Jy ! Component: 150 - total flux cleaned = -0.000485935 Jy ! Component: 200 - total flux cleaned = -0.000504428 Jy ! Total flux subtracted in 200 components = -0.000504428 Jy ! Clean residual min=-0.004068 max=0.004841 Jy/beam ! Clean residual mean=0.000007 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.162185 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.162185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087971Jy sigma=0.000758 ! Fit after self-cal, rms=0.087954Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087954Jy sigma=0.000758 ! Fit after self-cal, rms=0.087934Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.758 mas, bpa=-0.6103 degrees ! Estimated noise=1444.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161797 Jy ! Component: 100 - total flux cleaned = -0.000237188 Jy ! Component: 150 - total flux cleaned = -0.000267671 Jy ! Component: 200 - total flux cleaned = -0.000281798 Jy ! Total flux subtracted in 200 components = -0.000281798 Jy ! Clean residual min=-0.004073 max=0.004772 Jy/beam ! Clean residual mean=0.000007 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.161903 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.161903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087920Jy sigma=0.000758 ! Fit after self-cal, rms=0.087921Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421535 Jy ! Component: 100 - total flux cleaned = 0.00582619 Jy ! Component: 150 - total flux cleaned = 0.00656148 Jy ! Component: 200 - total flux cleaned = 0.00672741 Jy ! Total flux subtracted in 200 components = 0.00672741 Jy ! Clean residual min=-0.003849 max=0.004184 Jy/beam ! Clean residual mean=0.000006 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.16863 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.16863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087624Jy sigma=0.000755 ! Fit after self-cal, rms=0.087632Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087632Jy sigma=0.000755 ! Fit after self-cal, rms=0.087348Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.76 mas, bpa=-0.5274 degrees ! Estimated noise=1444.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183806 Jy ! Component: 100 - total flux cleaned = 0.00204359 Jy ! Component: 150 - total flux cleaned = 0.00209139 Jy ! Component: 200 - total flux cleaned = 0.0020922 Jy ! Total flux subtracted in 200 components = 0.0020922 Jy ! Clean residual min=-0.003750 max=0.004040 Jy/beam ! Clean residual mean=0.000005 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.170722 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.170722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087257Jy sigma=0.000754 ! Fit after self-cal, rms=0.087266Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535768 Jy ! Component: 100 - total flux cleaned = 0.000459493 Jy ! Component: 150 - total flux cleaned = 0.000389009 Jy ! Component: 200 - total flux cleaned = 0.000321859 Jy ! Total flux subtracted in 200 components = 0.000321859 Jy ! Clean residual min=-0.003708 max=0.003936 Jy/beam ! Clean residual mean=0.000005 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.171044 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.171044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087222Jy sigma=0.000754 ! Fit after self-cal, rms=0.087227Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087227Jy sigma=0.000754 ! Fit after self-cal, rms=0.087205Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.805 mas, bmaj=12.11 mas, bpa=-0.9703 degrees ! Estimated noise=1797.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016448 Jy ! Component: 100 - total flux cleaned = 0.000228783 Jy ! Component: 150 - total flux cleaned = 0.000310874 Jy ! Component: 200 - total flux cleaned = 0.000310569 Jy ! Total flux subtracted in 200 components = 0.000310569 Jy ! Clean residual min=-0.004286 max=0.005017 Jy/beam ! Clean residual mean=0.000009 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.171355 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.171355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087179Jy sigma=0.000753 ! Fit after self-cal, rms=0.087182Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-74.5, 99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027443 Jy ! Component: 100 - total flux cleaned = 0.00317657 Jy ! Component: 150 - total flux cleaned = 0.0033952 Jy ! Component: 200 - total flux cleaned = 0.00383621 Jy ! Total flux subtracted in 200 components = 0.00383621 Jy ! Clean residual min=-0.003664 max=0.003125 Jy/beam ! Clean residual mean=0.000005 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.175191 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 143 components and 0.175191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086926Jy sigma=0.000752 ! Fit after self-cal, rms=0.086936Jy sigma=0.000752 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.766 mas, bpa=-0.5548 degrees ! Estimated noise=1447.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.766 at -0.5548 degrees (North through East) ! Clean map min=-0.0031776 max=0.13863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=6.93 mas, bpa=-1.2 degrees ! Estimated noise=1735.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107222 Jy ! Component: 100 - total flux cleaned = 0.134576 Jy ! Component: 150 - total flux cleaned = 0.146306 Jy ! Component: 200 - total flux cleaned = 0.153055 Jy ! Total flux subtracted in 200 components = 0.153055 Jy ! Clean residual min=-0.004937 max=0.005464 Jy/beam ! Clean residual mean=0.000006 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.153055 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.153055 Jy ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.766 mas, bpa=-0.5548 degrees ! Estimated noise=1447.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535132 Jy ! Component: 100 - total flux cleaned = 0.00854909 Jy ! Component: 150 - total flux cleaned = 0.0109457 Jy ! Component: 200 - total flux cleaned = 0.0131738 Jy ! Total flux subtracted in 200 components = 0.0131738 Jy ! Clean residual min=-0.003767 max=0.003633 Jy/beam ! Clean residual mean=0.000006 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.166229 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 0.166229 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.805 mas, bmaj=12.11 mas, bpa=-0.9703 degrees ! Estimated noise=1797.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036346 Jy ! Component: 100 - total flux cleaned = 0.00566506 Jy ! Component: 150 - total flux cleaned = 0.00673024 Jy ! Component: 200 - total flux cleaned = 0.00756006 Jy ! Total flux subtracted in 200 components = 0.00756006 Jy ! Clean residual min=-0.003777 max=0.003295 Jy/beam ! Clean residual mean=0.000005 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.173789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534997 Jy ! Component: 100 - total flux cleaned = 0.00118085 Jy ! Component: 150 - total flux cleaned = 0.00171812 Jy ! Component: 200 - total flux cleaned = 0.00221477 Jy ! Total flux subtracted in 200 components = 0.00221477 Jy ! Clean residual min=-0.003451 max=0.003148 Jy/beam ! Clean residual mean=0.000004 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.176003 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 111 components and 0.176003 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.766 mas, bpa=-0.5548 degrees ! Estimated noise=1447.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102769 Jy ! Component: 100 - total flux cleaned = 0.00124692 Jy ! Component: 150 - total flux cleaned = 0.00144451 Jy ! Component: 200 - total flux cleaned = 0.00156501 Jy ! Total flux subtracted in 200 components = 0.00156501 Jy ! Clean residual min=-0.003370 max=0.003033 Jy/beam ! Clean residual mean=0.000001 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.177568 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 0.177568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086794Jy sigma=0.000750 ! Fit after self-cal, rms=0.086796Jy sigma=0.000750 wmodel J1016+0513_S_2014_12_20_pus_map.mod ! Writing 140 model components to file: J1016+0513_S_2014_12_20_pus_map.mod wobs J1016+0513_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2014_12_20_pus_uvs.fits wwins J1016+0513_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J1016+0513_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125197 Jy ! Component: 100 - total flux cleaned = -0.00131073 Jy ! Component: 150 - total flux cleaned = -0.00125776 Jy ! Component: 200 - total flux cleaned = -0.00115667 Jy ! Component: 250 - total flux cleaned = -0.0010119 Jy ! Component: 300 - total flux cleaned = -0.000873115 Jy ! Component: 350 - total flux cleaned = -0.000694431 Jy ! Component: 400 - total flux cleaned = -0.000694176 Jy ! Component: 450 - total flux cleaned = -0.00065254 Jy ! Component: 500 - total flux cleaned = -0.000857345 Jy ! Component: 550 - total flux cleaned = -0.000938272 Jy ! Component: 600 - total flux cleaned = -0.00109457 Jy ! Component: 650 - total flux cleaned = -0.00124698 Jy ! Component: 700 - total flux cleaned = -0.00117108 Jy ! Component: 750 - total flux cleaned = -0.00131827 Jy ! Component: 800 - total flux cleaned = -0.00135473 Jy ! Component: 850 - total flux cleaned = -0.00146111 Jy ! Component: 900 - total flux cleaned = -0.0015309 Jy ! Component: 950 - total flux cleaned = -0.00159974 Jy ! Component: 1000 - total flux cleaned = -0.0017678 Jy ! Component: 1050 - total flux cleaned = -0.00166804 Jy ! Component: 1100 - total flux cleaned = -0.0016036 Jy ! Component: 1150 - total flux cleaned = -0.00169996 Jy ! Component: 1200 - total flux cleaned = -0.00173077 Jy ! Component: 1250 - total flux cleaned = -0.00169934 Jy ! Component: 1300 - total flux cleaned = -0.0017602 Jy ! Component: 1350 - total flux cleaned = -0.00175989 Jy ! Component: 1400 - total flux cleaned = -0.00176063 Jy ! Component: 1450 - total flux cleaned = -0.00178971 Jy ! Component: 1500 - total flux cleaned = -0.00178971 Jy ! Component: 1550 - total flux cleaned = -0.00178943 Jy ! Component: 1600 - total flux cleaned = -0.00178941 Jy ! Component: 1650 - total flux cleaned = -0.00181764 Jy ! Component: 1700 - total flux cleaned = -0.00184555 Jy ! Component: 1750 - total flux cleaned = -0.00189994 Jy ! Component: 1800 - total flux cleaned = -0.00187373 Jy ! Component: 1850 - total flux cleaned = -0.00206033 Jy ! Component: 1900 - total flux cleaned = -0.00211275 Jy ! Component: 1950 - total flux cleaned = -0.00211276 Jy ! Component: 2000 - total flux cleaned = -0.00216436 Jy ! Component: 2050 - total flux cleaned = -0.00226632 Jy ! Component: 2100 - total flux cleaned = -0.00231686 Jy ! Component: 2150 - total flux cleaned = -0.00229197 Jy ! Component: 2200 - total flux cleaned = -0.00236652 Jy ! Component: 2250 - total flux cleaned = -0.00241586 Jy ! Component: 2300 - total flux cleaned = -0.00239163 Jy ! Component: 2350 - total flux cleaned = -0.0024639 Jy ! Component: 2400 - total flux cleaned = -0.00251156 Jy ! Component: 2450 - total flux cleaned = -0.00241669 Jy ! Component: 2500 - total flux cleaned = -0.00244023 Jy ! Component: 2550 - total flux cleaned = -0.00237028 Jy ! Component: 2600 - total flux cleaned = -0.00243956 Jy ! Component: 2650 - total flux cleaned = -0.00239341 Jy ! Component: 2700 - total flux cleaned = -0.00230223 Jy ! Component: 2750 - total flux cleaned = -0.00225696 Jy ! Component: 2800 - total flux cleaned = -0.00223458 Jy ! Component: 2850 - total flux cleaned = -0.00216757 Jy ! Component: 2900 - total flux cleaned = -0.00219 Jy ! Component: 2950 - total flux cleaned = -0.00223389 Jy ! Component: 3000 - total flux cleaned = -0.00223386 Jy ! Component: 3050 - total flux cleaned = -0.00223382 Jy ! Component: 3100 - total flux cleaned = -0.00223347 Jy ! Component: 3150 - total flux cleaned = -0.00219026 Jy ! Component: 3200 - total flux cleaned = -0.00214774 Jy ! Component: 3250 - total flux cleaned = -0.00214775 Jy ! Component: 3300 - total flux cleaned = -0.00216883 Jy ! Component: 3350 - total flux cleaned = -0.00216889 Jy ! Component: 3400 - total flux cleaned = -0.00218965 Jy ! Component: 3450 - total flux cleaned = -0.00214846 Jy ! Component: 3500 - total flux cleaned = -0.00210767 Jy ! Component: 3550 - total flux cleaned = -0.00212813 Jy ! Component: 3600 - total flux cleaned = -0.0021482 Jy ! Component: 3650 - total flux cleaned = -0.00214803 Jy ! Component: 3700 - total flux cleaned = -0.00208793 Jy ! Component: 3750 - total flux cleaned = -0.00210776 Jy ! Component: 3800 - total flux cleaned = -0.00214712 Jy ! Component: 3850 - total flux cleaned = -0.00212751 Jy ! Component: 3900 - total flux cleaned = -0.00214694 Jy ! Component: 3950 - total flux cleaned = -0.00214687 Jy ! Component: 4000 - total flux cleaned = -0.00218547 Jy ! Component: 4050 - total flux cleaned = -0.0021854 Jy ! Total flux subtracted in 4096 components = -0.00210902 Jy ! Clean residual min=-0.001134 max=0.001158 Jy/beam ! Clean residual mean=0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.175459 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 394 components and 0.175459 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.766 at -0.5548 degrees (North through East) ! Clean map min=-0.002802 max=0.13845 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138454 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322802 device "J1016+0513_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1016+0513_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.699444 0.699444 1.39889 2.79778 5.59555 11.1911 22.3822 44.7644 89.5289 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.766 at -0.5548 degrees (North through East) ! Clean map min=-0.002802 max=0.13845 Jy/beam quit ! Quitting program ! Log file J1016+0513_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:31:59 2016