! Started logfile: J1014+2301_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:56:09 2016 obs J1014+2301_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1014+2301_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.548148 visibilities/baseline/integration-bin. ! Found source: J1014+2301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1014+2301_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.508844Jy sigma=0.005771 ! Fit after self-cal, rms=0.501607Jy sigma=0.005694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.254 mas, bmaj=12.17 mas, bpa=14.84 degrees ! Estimated noise=2043.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391876 Jy ! Component: 100 - total flux cleaned = 0.499249 Jy ! Total flux subtracted in 100 components = 0.499249 Jy ! Clean residual min=-0.024966 max=0.047103 Jy/beam ! Clean residual mean=-0.000316 rms=0.009844 Jy/beam ! Combined flux in latest and established models = 0.499249 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.499249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124919Jy sigma=0.001253 ! Fit after self-cal, rms=0.124764Jy sigma=0.001252 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.03 mas, bmaj=12.07 mas, bpa=15.04 degrees ! Estimated noise=1655.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518627 Jy ! Component: 100 - total flux cleaned = 0.0770968 Jy ! Component: 150 - total flux cleaned = 0.0918419 Jy ! Component: 200 - total flux cleaned = 0.101884 Jy ! Total flux subtracted in 200 components = 0.101884 Jy ! Clean residual min=-0.021397 max=0.018341 Jy/beam ! Clean residual mean=-0.000187 rms=0.005480 Jy/beam ! Combined flux in latest and established models = 0.601133 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 72 components and 0.601133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098834Jy sigma=0.001014 ! Fit after self-cal, rms=0.098705Jy sigma=0.001013 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.00* KP 1.10 ! LA 0.99 MK 1.00* NL 0.88 OV 1.03 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.00* KP 1.08 ! LA 0.96 MK 1.00* NL 1.00 OV 1.05 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.00* KP 0.96 ! LA 0.79 MK 1.00* NL 1.12 OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.89 HN 1.00* KP 0.93 ! LA 0.84 MK 1.00* NL 1.03 OV 1.00 ! PT 1.06 SC 0.98 ! ! ! Fit before self-cal, rms=0.098705Jy sigma=0.001013 ! Fit after self-cal, rms=0.074972Jy sigma=0.000801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.036 mas, bmaj=12.19 mas, bpa=15.15 degrees ! Estimated noise=1657.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542002 Jy ! Component: 100 - total flux cleaned = -0.000622528 Jy ! Component: 150 - total flux cleaned = -0.000696341 Jy ! Component: 200 - total flux cleaned = -0.000628175 Jy ! Total flux subtracted in 200 components = -0.000628175 Jy ! Clean residual min=-0.009076 max=0.012960 Jy/beam ! Clean residual mean=-0.000068 rms=0.002716 Jy/beam ! Combined flux in latest and established models = 0.600505 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.600505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074813Jy sigma=0.000799 ! Fit after self-cal, rms=0.074729Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074729Jy sigma=0.000799 ! Fit after self-cal, rms=0.074658Jy sigma=0.000799 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.041 mas, bmaj=12.19 mas, bpa=15.14 degrees ! Estimated noise=1655.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104003 Jy ! Component: 100 - total flux cleaned = -0.000973834 Jy ! Component: 150 - total flux cleaned = -0.000912479 Jy ! Component: 200 - total flux cleaned = -0.000852398 Jy ! Total flux subtracted in 200 components = -0.000852398 Jy ! Clean residual min=-0.008804 max=0.012813 Jy/beam ! Clean residual mean=-0.000066 rms=0.002682 Jy/beam ! Combined flux in latest and established models = 0.599653 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.599653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074549Jy sigma=0.000798 ! Fit after self-cal, rms=0.074533Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (71, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011965 Jy ! Component: 100 - total flux cleaned = 0.0180497 Jy ! Component: 150 - total flux cleaned = 0.0211935 Jy ! Component: 200 - total flux cleaned = 0.0237405 Jy ! Total flux subtracted in 200 components = 0.0237405 Jy ! Clean residual min=-0.006051 max=0.006013 Jy/beam ! Clean residual mean=-0.000051 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.623393 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 125 components and 0.623393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072607Jy sigma=0.000774 ! Fit after self-cal, rms=0.072568Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072568Jy sigma=0.000774 ! Fit after self-cal, rms=0.072364Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.054 mas, bmaj=12.17 mas, bpa=15.17 degrees ! Estimated noise=1649.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028383 Jy ! Component: 100 - total flux cleaned = 0.00456027 Jy ! Component: 150 - total flux cleaned = 0.00610473 Jy ! Component: 200 - total flux cleaned = 0.0073369 Jy ! Total flux subtracted in 200 components = 0.0073369 Jy ! Clean residual min=-0.005078 max=0.005273 Jy/beam ! Clean residual mean=-0.000038 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.63073 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 152 components and 0.630731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072118Jy sigma=0.000770 ! Fit after self-cal, rms=0.072114Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125586 Jy ! Component: 100 - total flux cleaned = 0.00209119 Jy ! Component: 150 - total flux cleaned = 0.00267301 Jy ! Component: 200 - total flux cleaned = 0.00315337 Jy ! Total flux subtracted in 200 components = 0.00315337 Jy ! Clean residual min=-0.004973 max=0.004962 Jy/beam ! Clean residual mean=-0.000036 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.633884 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 172 components and 0.633884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072021Jy sigma=0.000769 ! Fit after self-cal, rms=0.072018Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072018Jy sigma=0.000769 ! Fit after self-cal, rms=0.071989Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.404 mas, bmaj=12.67 mas, bpa=18.15 degrees ! Estimated noise=1721.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203066 Jy ! Component: 100 - total flux cleaned = 0.00353192 Jy ! Component: 150 - total flux cleaned = 0.00456137 Jy ! Component: 200 - total flux cleaned = 0.00518977 Jy ! Total flux subtracted in 200 components = 0.00518977 Jy ! Clean residual min=-0.004568 max=0.004547 Jy/beam ! Clean residual mean=-0.000043 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.639074 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 193 components and 0.639074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071939Jy sigma=0.000768 ! Fit after self-cal, rms=0.071933Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437823 Jy ! Component: 100 - total flux cleaned = 0.000835563 Jy ! Component: 150 - total flux cleaned = 0.00116506 Jy ! Component: 200 - total flux cleaned = 0.00149838 Jy ! Total flux subtracted in 200 components = 0.00149838 Jy ! Clean residual min=-0.004411 max=0.004421 Jy/beam ! Clean residual mean=-0.000042 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.640572 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 212 components and 0.640572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071908Jy sigma=0.000768 ! Fit after self-cal, rms=0.071904Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.058 mas, bmaj=12.17 mas, bpa=15.19 degrees ! Estimated noise=1648.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.058 x 12.17 at 15.19 degrees (North through East) ! Clean map min=-0.0047134 max=0.50301 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071904Jy sigma=0.000768 ! Fit after self-cal, rms=0.067685Jy sigma=0.000713 ! Inverting map and beam ! Estimated beam: bmin=6.058 mas, bmaj=12.16 mas, bpa=15.22 degrees ! Estimated noise=1647.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545085 Jy ! Component: 100 - total flux cleaned = 0.000842601 Jy ! Component: 150 - total flux cleaned = 0.00107587 Jy ! Component: 200 - total flux cleaned = 0.0012205 Jy ! Total flux subtracted in 200 components = 0.0012205 Jy ! Clean residual min=-0.004665 max=0.004524 Jy/beam ! Clean residual mean=-0.000032 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.641793 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 233 components and 0.641793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067641Jy sigma=0.000713 ! Fit after self-cal, rms=0.067640Jy sigma=0.000713 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175008 Jy ! Component: 100 - total flux cleaned = 0.000307253 Jy ! Component: 150 - total flux cleaned = 0.000462924 Jy ! Component: 200 - total flux cleaned = 0.000612204 Jy ! Total flux subtracted in 200 components = 0.000612204 Jy ! Clean residual min=-0.004625 max=0.004420 Jy/beam ! Clean residual mean=-0.000032 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.642405 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 240 components and 0.642405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067613Jy sigma=0.000712 ! Fit after self-cal, rms=0.067612Jy sigma=0.000712 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067612Jy sigma=0.000712 ! Fit after self-cal, rms=0.067619Jy sigma=0.000712 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.323 mas, bmaj=12.18 mas, bpa=15.01 degrees ! Estimated noise=2010.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.384185 Jy ! Component: 100 - total flux cleaned = 0.486063 Jy ! Component: 150 - total flux cleaned = 0.53118 Jy ! Component: 200 - total flux cleaned = 0.554338 Jy ! Total flux subtracted in 200 components = 0.554338 Jy ! Clean residual min=-0.010335 max=0.015569 Jy/beam ! Clean residual mean=-0.000117 rms=0.003622 Jy/beam ! Combined flux in latest and established models = 0.554338 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.554338 Jy ! Inverting map and beam ! Estimated beam: bmin=6.061 mas, bmaj=12.16 mas, bpa=15.24 degrees ! Estimated noise=1647.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163245 Jy ! Component: 100 - total flux cleaned = 0.0274257 Jy ! Component: 150 - total flux cleaned = 0.0361571 Jy ! Component: 200 - total flux cleaned = 0.0433667 Jy ! Total flux subtracted in 200 components = 0.0433667 Jy ! Clean residual min=-0.006655 max=0.007586 Jy/beam ! Clean residual mean=-0.000099 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.597705 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 73 components and 0.597705 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.405 mas, bmaj=12.67 mas, bpa=18.21 degrees ! Estimated noise=1720.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00799968 Jy ! Component: 100 - total flux cleaned = 0.0142738 Jy ! Component: 150 - total flux cleaned = 0.0193941 Jy ! Component: 200 - total flux cleaned = 0.023644 Jy ! Total flux subtracted in 200 components = 0.023644 Jy ! Clean residual min=-0.005776 max=0.004395 Jy/beam ! Clean residual mean=-0.000089 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.621349 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356671 Jy ! Component: 100 - total flux cleaned = 0.00657461 Jy ! Component: 150 - total flux cleaned = 0.00912201 Jy ! Component: 200 - total flux cleaned = 0.0112948 Jy ! Total flux subtracted in 200 components = 0.0112948 Jy ! Clean residual min=-0.004889 max=0.004393 Jy/beam ! Clean residual mean=-0.000068 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.632644 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 172 components and 0.632644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.061 mas, bmaj=12.16 mas, bpa=15.24 degrees ! Estimated noise=1647.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007081 Jy ! Component: 100 - total flux cleaned = 0.00176792 Jy ! Component: 150 - total flux cleaned = 0.00241495 Jy ! Component: 200 - total flux cleaned = 0.00306526 Jy ! Total flux subtracted in 200 components = 0.00306526 Jy ! Clean residual min=-0.004666 max=0.004450 Jy/beam ! Clean residual mean=-0.000044 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.635709 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 188 components and 0.635709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067755Jy sigma=0.000714 ! Fit after self-cal, rms=0.067720Jy sigma=0.000714 wmodel J1014+2301_S_2015_03_17_pus_map.mod ! Writing 188 model components to file: J1014+2301_S_2015_03_17_pus_map.mod wobs J1014+2301_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1014+2301_S_2015_03_17_pus_uvs.fits wwins J1014+2301_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1014+2301_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.39363e-06 Jy ! Component: 100 - total flux cleaned = -0.000136942 Jy ! Component: 150 - total flux cleaned = -0.000474931 Jy ! Component: 200 - total flux cleaned = -0.000665224 Jy ! Component: 250 - total flux cleaned = -0.000725184 Jy ! Component: 300 - total flux cleaned = -0.000727316 Jy ! Component: 350 - total flux cleaned = -0.000726931 Jy ! Component: 400 - total flux cleaned = -0.000678148 Jy ! Component: 450 - total flux cleaned = -0.000679552 Jy ! Component: 500 - total flux cleaned = -0.000679198 Jy ! Component: 550 - total flux cleaned = -0.000594969 Jy ! Component: 600 - total flux cleaned = -0.000473025 Jy ! Component: 650 - total flux cleaned = -0.000354757 Jy ! Component: 700 - total flux cleaned = -0.000239947 Jy ! Component: 750 - total flux cleaned = -0.000166985 Jy ! Component: 800 - total flux cleaned = -0.000130314 Jy ! Component: 850 - total flux cleaned = -0.00012927 Jy ! Component: 900 - total flux cleaned = -0.000264926 Jy ! Component: 950 - total flux cleaned = -0.000464604 Jy ! Component: 1000 - total flux cleaned = -0.000660201 Jy ! Component: 1050 - total flux cleaned = -0.000851519 Jy ! Component: 1100 - total flux cleaned = -0.00103887 Jy ! Component: 1150 - total flux cleaned = -0.00122309 Jy ! Component: 1200 - total flux cleaned = -0.00143382 Jy ! Component: 1250 - total flux cleaned = -0.00155193 Jy ! Component: 1300 - total flux cleaned = -0.00172569 Jy ! Component: 1350 - total flux cleaned = -0.0018677 Jy ! Component: 1400 - total flux cleaned = -0.00195114 Jy ! Component: 1450 - total flux cleaned = -0.00203333 Jy ! Component: 1500 - total flux cleaned = -0.00211442 Jy ! Component: 1550 - total flux cleaned = -0.00214123 Jy ! Component: 1600 - total flux cleaned = -0.00224618 Jy ! Component: 1650 - total flux cleaned = -0.00234926 Jy ! Component: 1700 - total flux cleaned = -0.00242504 Jy ! Component: 1750 - total flux cleaned = -0.00244997 Jy ! Component: 1800 - total flux cleaned = -0.00247447 Jy ! Component: 1850 - total flux cleaned = -0.00257207 Jy ! Component: 1900 - total flux cleaned = -0.00254782 Jy ! Component: 1950 - total flux cleaned = -0.00259561 Jy ! Component: 2000 - total flux cleaned = -0.00261941 Jy ! Component: 2050 - total flux cleaned = -0.0026433 Jy ! Component: 2100 - total flux cleaned = -0.00276069 Jy ! Component: 2150 - total flux cleaned = -0.00283069 Jy ! Component: 2200 - total flux cleaned = -0.00294718 Jy ! Component: 2250 - total flux cleaned = -0.0030865 Jy ! Component: 2300 - total flux cleaned = -0.00320247 Jy ! Component: 2350 - total flux cleaned = -0.00334103 Jy ! Component: 2400 - total flux cleaned = -0.00345626 Jy ! Component: 2450 - total flux cleaned = -0.00357114 Jy ! Component: 2500 - total flux cleaned = -0.00370874 Jy ! Component: 2550 - total flux cleaned = -0.0038461 Jy ! Component: 2600 - total flux cleaned = -0.0039603 Jy ! Component: 2650 - total flux cleaned = -0.00412 Jy ! Component: 2700 - total flux cleaned = -0.00423375 Jy ! Component: 2750 - total flux cleaned = -0.00434756 Jy ! Component: 2800 - total flux cleaned = -0.00446127 Jy ! Component: 2850 - total flux cleaned = -0.00452943 Jy ! Component: 2900 - total flux cleaned = -0.0046883 Jy ! Component: 2950 - total flux cleaned = -0.00477919 Jy ! Component: 3000 - total flux cleaned = -0.00491538 Jy ! Component: 3050 - total flux cleaned = -0.00500628 Jy ! Component: 3100 - total flux cleaned = -0.00509705 Jy ! Component: 3150 - total flux cleaned = -0.00521053 Jy ! Component: 3200 - total flux cleaned = -0.00530144 Jy ! Component: 3250 - total flux cleaned = -0.00543788 Jy ! Component: 3300 - total flux cleaned = -0.00555184 Jy ! Component: 3350 - total flux cleaned = -0.00568891 Jy ! Component: 3400 - total flux cleaned = -0.00578056 Jy ! Component: 3450 - total flux cleaned = -0.00587243 Jy ! Component: 3500 - total flux cleaned = -0.0059879 Jy ! Component: 3550 - total flux cleaned = -0.00603423 Jy ! Component: 3600 - total flux cleaned = -0.00608075 Jy ! Component: 3650 - total flux cleaned = -0.00615072 Jy ! Component: 3700 - total flux cleaned = -0.00624474 Jy ! Component: 3750 - total flux cleaned = -0.00629179 Jy ! Component: 3800 - total flux cleaned = -0.0063868 Jy ! Component: 3850 - total flux cleaned = -0.00643462 Jy ! Component: 3900 - total flux cleaned = -0.00645866 Jy ! Component: 3950 - total flux cleaned = -0.00650691 Jy ! Component: 4000 - total flux cleaned = -0.00662838 Jy ! Component: 4050 - total flux cleaned = -0.00665306 Jy ! Total flux subtracted in 4096 components = -0.00667777 Jy ! Clean residual min=-0.001441 max=0.001428 Jy/beam ! Clean residual mean=-0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.629031 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 511 components and 0.629031 Jy ![Exited script file: muppet] wmap "J1014+2301_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.061 x 12.16 at 15.24 degrees (North through East) ! Clean map min=-0.0033724 max=0.50176 Jy/beam ! Writing clean map to FITS file: J1014+2301_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.50176 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.26244 0.26244 0.524881 1.04976 2.09952 4.19905 8.3981 16.7962 33.5924 67.1848 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.501 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.061 x 12.16 at 15.24 degrees (North through East) ! Clean map min=-0.0033724 max=0.50176 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1014+2301_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:14 2016