! Started logfile: J1014+2301_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:20:34 2017 obs J1014+2301_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1014+2301_S_2015_01_23_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.619373 visibilities/baseline/integration-bin. ! Found source: J1014+2301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 4348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1014+2301_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.665189Jy sigma=0.007217 ! Fit after self-cal, rms=0.655534Jy sigma=0.007121 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=7.169 mas, bpa=19.25 degrees ! Estimated noise=1366.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284121 Jy ! Component: 100 - total flux cleaned = 0.374445 Jy ! Total flux subtracted in 100 components = 0.374445 Jy ! Clean residual min=-0.029546 max=0.046576 Jy/beam ! Clean residual mean=-0.000089 rms=0.009380 Jy/beam ! Combined flux in latest and established models = 0.374445 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.374445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259304Jy sigma=0.001853 ! Fit after self-cal, rms=0.259267Jy sigma=0.001852 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=7.956 mas, bpa=15.87 degrees ! Estimated noise=1051.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066681 Jy ! Component: 100 - total flux cleaned = 0.107063 Jy ! Component: 150 - total flux cleaned = 0.132414 Jy ! Component: 200 - total flux cleaned = 0.148695 Jy ! Total flux subtracted in 200 components = 0.148695 Jy ! Clean residual min=-0.030802 max=0.031891 Jy/beam ! Clean residual mean=-0.000045 rms=0.007345 Jy/beam ! Combined flux in latest and established models = 0.52314 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 0.52314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237842Jy sigma=0.001545 ! Fit after self-cal, rms=0.237751Jy sigma=0.001543 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.74 HN 1.43 KP 1.07 ! LA 0.95 MK 1.05 NL 0.98 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.42 KP 0.97 ! LA 0.94 MK 1.00 NL 1.11 OV 1.01 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.02 HN 1.46 KP 0.85 ! LA 0.76 MK 1.01 NL 1.36 OV 0.93 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.31 KP 0.79 ! LA 0.80 MK 1.00 NL 0.98 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.237751Jy sigma=0.001543 ! Fit after self-cal, rms=0.224075Jy sigma=0.001286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=8.3 mas, bpa=17.53 degrees ! Estimated noise=1077.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149649 Jy ! Component: 100 - total flux cleaned = -0.0185395 Jy ! Component: 150 - total flux cleaned = -0.0214353 Jy ! Component: 200 - total flux cleaned = -0.0226722 Jy ! Total flux subtracted in 200 components = -0.0226722 Jy ! Clean residual min=-0.024236 max=0.027582 Jy/beam ! Clean residual mean=-0.000009 rms=0.005693 Jy/beam ! Combined flux in latest and established models = 0.500468 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.500468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221747Jy sigma=0.001259 ! Fit after self-cal, rms=0.221680Jy sigma=0.001258 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221680Jy sigma=0.001258 ! Fit after self-cal, rms=0.518080Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=8.598 mas, bpa=18.42 degrees ! Estimated noise=1085.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00979074 Jy ! Component: 100 - total flux cleaned = -0.0108748 Jy ! Component: 150 - total flux cleaned = -0.0111926 Jy ! Component: 200 - total flux cleaned = -0.0117602 Jy ! Total flux subtracted in 200 components = -0.0117602 Jy ! Clean residual min=-0.012291 max=0.008577 Jy/beam ! Clean residual mean=-0.000027 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.488708 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.488708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518059Jy sigma=0.000853 ! Fit after self-cal, rms=0.518747Jy sigma=0.000852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000856378 Jy ! Component: 100 - total flux cleaned = -0.00131719 Jy ! Component: 150 - total flux cleaned = -0.00172929 Jy ! Component: 200 - total flux cleaned = -0.00209917 Jy ! Total flux subtracted in 200 components = -0.00209917 Jy ! Clean residual min=-0.010756 max=0.008279 Jy/beam ! Clean residual mean=-0.000027 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.486609 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.486609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518868Jy sigma=0.000839 ! Fit after self-cal, rms=0.518866Jy sigma=0.000839 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518866Jy sigma=0.000839 ! Fit after self-cal, rms=0.565981Jy sigma=0.000832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=8.661 mas, bpa=18.29 degrees ! Estimated noise=1083.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00545163 Jy ! Component: 100 - total flux cleaned = -0.00586914 Jy ! Component: 150 - total flux cleaned = -0.0062405 Jy ! Component: 200 - total flux cleaned = -0.00656785 Jy ! Total flux subtracted in 200 components = -0.00656785 Jy ! Clean residual min=-0.008901 max=0.006901 Jy/beam ! Clean residual mean=-0.000021 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.480041 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.480041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.566044Jy sigma=0.000820 ! Fit after self-cal, rms=0.566010Jy sigma=0.000820 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357788 Jy ! Component: 100 - total flux cleaned = -0.00064007 Jy ! Component: 150 - total flux cleaned = -0.000894604 Jy ! Component: 200 - total flux cleaned = -0.00101234 Jy ! Total flux subtracted in 200 components = -0.00101234 Jy ! Clean residual min=-0.007996 max=0.006760 Jy/beam ! Clean residual mean=-0.000021 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.479029 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.479029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.566093Jy sigma=0.000815 ! Fit after self-cal, rms=0.566021Jy sigma=0.000815 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.566021Jy sigma=0.000815 ! Fit after self-cal, rms=0.591827Jy sigma=0.000813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.6 mas, bmaj=10.96 mas, bpa=5.855 degrees ! Estimated noise=1239.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251419 Jy ! Component: 100 - total flux cleaned = -0.00326308 Jy ! Component: 150 - total flux cleaned = -0.00371306 Jy ! Component: 200 - total flux cleaned = -0.00398913 Jy ! Total flux subtracted in 200 components = -0.00398913 Jy ! Clean residual min=-0.008854 max=0.007224 Jy/beam ! Clean residual mean=-0.000035 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.47504 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.47504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.591912Jy sigma=0.000811 ! Fit after self-cal, rms=0.591841Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111263 Jy ! Component: 100 - total flux cleaned = -9.94466e-05 Jy ! Component: 150 - total flux cleaned = -0.000142665 Jy ! Component: 200 - total flux cleaned = -0.000180162 Jy ! Total flux subtracted in 200 components = -0.000180162 Jy ! Clean residual min=-0.008507 max=0.007307 Jy/beam ! Clean residual mean=-0.000035 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.474859 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.474859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.591878Jy sigma=0.000812 ! Fit after self-cal, rms=0.591828Jy sigma=0.000812 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=8.701 mas, bpa=18.17 degrees ! Estimated noise=1081.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.045 x 8.701 at 18.17 degrees (North through East) ! Clean map min=-0.0064825 max=0.38448 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.753 mas, bpa=21.07 degrees ! Estimated noise=1436.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291113 Jy ! Component: 100 - total flux cleaned = 0.379596 Jy ! Component: 150 - total flux cleaned = 0.420099 Jy ! Component: 200 - total flux cleaned = 0.439956 Jy ! Total flux subtracted in 200 components = 0.439956 Jy ! Clean residual min=-0.009765 max=0.013641 Jy/beam ! Clean residual mean=-0.000026 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 0.439956 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.439956 Jy ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=8.701 mas, bpa=18.17 degrees ! Estimated noise=1081.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157313 Jy ! Component: 100 - total flux cleaned = 0.0252128 Jy ! Component: 150 - total flux cleaned = 0.0315718 Jy ! Component: 200 - total flux cleaned = 0.0336367 Jy ! Total flux subtracted in 200 components = 0.0336367 Jy ! Clean residual min=-0.006230 max=0.006047 Jy/beam ! Clean residual mean=-0.000018 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.473592 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 53 components and 0.473592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.6 mas, bmaj=10.96 mas, bpa=5.855 degrees ! Estimated noise=1239.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347323 Jy ! Component: 100 - total flux cleaned = 0.00411018 Jy ! Component: 150 - total flux cleaned = 0.00444787 Jy ! Component: 200 - total flux cleaned = 0.00466363 Jy ! Total flux subtracted in 200 components = 0.00466363 Jy ! Clean residual min=-0.008681 max=0.007952 Jy/beam ! Clean residual mean=-0.000033 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.478256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125747 Jy ! Component: 100 - total flux cleaned = 0.000181605 Jy ! Component: 150 - total flux cleaned = 0.000232925 Jy ! Component: 200 - total flux cleaned = 0.00027938 Jy ! Total flux subtracted in 200 components = 0.00027938 Jy ! Clean residual min=-0.008570 max=0.007901 Jy/beam ! Clean residual mean=-0.000033 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 0.478535 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 95 components and 0.478535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=8.701 mas, bpa=18.17 degrees ! Estimated noise=1081.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000348946 Jy ! Component: 100 - total flux cleaned = -3.81665e-05 Jy ! Component: 150 - total flux cleaned = 0.000142149 Jy ! Component: 200 - total flux cleaned = 0.000224657 Jy ! Total flux subtracted in 200 components = 0.000224657 Jy ! Clean residual min=-0.005811 max=0.005933 Jy/beam ! Clean residual mean=-0.000015 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.47876 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.47876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.593501Jy sigma=0.000798 ! Fit after self-cal, rms=0.592161Jy sigma=0.000797 wmodel J1014+2301_S_2015_01_23_pus_map.mod ! Writing 116 model components to file: J1014+2301_S_2015_01_23_pus_map.mod wobs J1014+2301_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1014+2301_S_2015_01_23_pus_uvs.fits wwins J1014+2301_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1014+2301_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197691 Jy ! Component: 100 - total flux cleaned = 0.000662917 Jy ! Component: 150 - total flux cleaned = 0.00134388 Jy ! Component: 200 - total flux cleaned = 0.00207143 Jy ! Component: 250 - total flux cleaned = 0.00245401 Jy ! Component: 300 - total flux cleaned = 0.00282459 Jy ! Component: 350 - total flux cleaned = 0.00318043 Jy ! Component: 400 - total flux cleaned = 0.00365925 Jy ! Component: 450 - total flux cleaned = 0.00392434 Jy ! Component: 500 - total flux cleaned = 0.00405236 Jy ! Component: 550 - total flux cleaned = 0.00423864 Jy ! Component: 600 - total flux cleaned = 0.00453903 Jy ! Component: 650 - total flux cleaned = 0.00465531 Jy ! Component: 700 - total flux cleaned = 0.00465476 Jy ! Component: 750 - total flux cleaned = 0.00476682 Jy ! Component: 800 - total flux cleaned = 0.00476577 Jy ! Component: 850 - total flux cleaned = 0.0047136 Jy ! Component: 900 - total flux cleaned = 0.00461035 Jy ! Component: 950 - total flux cleaned = 0.0046109 Jy ! Component: 1000 - total flux cleaned = 0.00450969 Jy ! Component: 1050 - total flux cleaned = 0.00450918 Jy ! Component: 1100 - total flux cleaned = 0.00441088 Jy ! Component: 1150 - total flux cleaned = 0.00445821 Jy ! Component: 1200 - total flux cleaned = 0.00436429 Jy ! Component: 1250 - total flux cleaned = 0.00427204 Jy ! Component: 1300 - total flux cleaned = 0.00409061 Jy ! Component: 1350 - total flux cleaned = 0.00400173 Jy ! Component: 1400 - total flux cleaned = 0.0040458 Jy ! Component: 1450 - total flux cleaned = 0.00391539 Jy ! Component: 1500 - total flux cleaned = 0.00387182 Jy ! Component: 1550 - total flux cleaned = 0.00370166 Jy ! Component: 1600 - total flux cleaned = 0.00345017 Jy ! Component: 1650 - total flux cleaned = 0.00316273 Jy ! Component: 1700 - total flux cleaned = 0.00303997 Jy ! Component: 1750 - total flux cleaned = 0.00279945 Jy ! Component: 1800 - total flux cleaned = 0.00256139 Jy ! Component: 1850 - total flux cleaned = 0.00240472 Jy ! Component: 1900 - total flux cleaned = 0.00217275 Jy ! Component: 1950 - total flux cleaned = 0.00190581 Jy ! Component: 2000 - total flux cleaned = 0.00168012 Jy ! Component: 2050 - total flux cleaned = 0.00160614 Jy ! Component: 2100 - total flux cleaned = 0.00153227 Jy ! Component: 2150 - total flux cleaned = 0.00138659 Jy ! Component: 2200 - total flux cleaned = 0.00124181 Jy ! Component: 2250 - total flux cleaned = 0.0010283 Jy ! Component: 2300 - total flux cleaned = 0.00102779 Jy ! Component: 2350 - total flux cleaned = 0.000782373 Jy ! Component: 2400 - total flux cleaned = 0.000574805 Jy ! Component: 2450 - total flux cleaned = 0.000574944 Jy ! Component: 2500 - total flux cleaned = 0.000438686 Jy ! Component: 2550 - total flux cleaned = 0.000303934 Jy ! Component: 2600 - total flux cleaned = 0.000370725 Jy ! Component: 2650 - total flux cleaned = 0.000205266 Jy ! Component: 2700 - total flux cleaned = 0.0001728 Jy ! Component: 2750 - total flux cleaned = 0.000107928 Jy ! Component: 2800 - total flux cleaned = 4.36461e-05 Jy ! Component: 2850 - total flux cleaned = 7.53094e-05 Jy ! Component: 2900 - total flux cleaned = -1.97917e-05 Jy ! Component: 2950 - total flux cleaned = -1.959e-05 Jy ! Component: 3000 - total flux cleaned = -0.000113737 Jy ! Component: 3050 - total flux cleaned = -0.000144588 Jy ! Component: 3100 - total flux cleaned = -0.000298165 Jy ! Component: 3150 - total flux cleaned = -0.000328414 Jy ! Component: 3200 - total flux cleaned = -0.000388948 Jy ! Component: 3250 - total flux cleaned = -0.000419069 Jy ! Component: 3300 - total flux cleaned = -0.000538387 Jy ! Component: 3350 - total flux cleaned = -0.000538129 Jy ! Component: 3400 - total flux cleaned = -0.00062656 Jy ! Component: 3450 - total flux cleaned = -0.000626534 Jy ! Component: 3500 - total flux cleaned = -0.000801321 Jy ! Component: 3550 - total flux cleaned = -0.000858878 Jy ! Component: 3600 - total flux cleaned = -0.000887759 Jy ! Component: 3650 - total flux cleaned = -0.00108834 Jy ! Component: 3700 - total flux cleaned = -0.00128771 Jy ! Component: 3750 - total flux cleaned = -0.00125936 Jy ! Component: 3800 - total flux cleaned = -0.00137245 Jy ! Component: 3850 - total flux cleaned = -0.00156892 Jy ! Component: 3900 - total flux cleaned = -0.0015692 Jy ! Component: 3950 - total flux cleaned = -0.00168058 Jy ! Component: 4000 - total flux cleaned = -0.00170812 Jy ! Component: 4050 - total flux cleaned = -0.00181826 Jy ! Total flux subtracted in 4096 components = -0.00187325 Jy ! Clean residual min=-0.001542 max=0.001537 Jy/beam ! Clean residual mean=-0.000006 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.476887 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 423 components and 0.476887 Jy ![Exited script file: muppet] wmap "J1014+2301_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.045 x 8.701 at 18.17 degrees (North through East) ! Clean map min=-0.0031527 max=0.3879 Jy/beam ! Writing clean map to FITS file: J1014+2301_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.387902 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000513523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.397154 0.397154 0.794308 1.58862 3.17723 6.35447 12.7089 25.4179 50.8357 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.387 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.045 x 8.701 at 18.17 degrees (North through East) ! Clean map min=-0.0031527 max=0.3879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1014+2301_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:20:39 2017