! Started logfile: J1014+2301_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:50:08 2017 obs J1014+2301_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1014+2301_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1014+2301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1014+2301_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.567876Jy sigma=0.006466 ! Fit after self-cal, rms=0.563383Jy sigma=0.006415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.238 mas, bmaj=8.044 mas, bpa=-1.396 degrees ! Estimated noise=1873.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.346598 Jy ! Component: 100 - total flux cleaned = 0.441383 Jy ! Total flux subtracted in 100 components = 0.441383 Jy ! Clean residual min=-0.026479 max=0.041991 Jy/beam ! Clean residual mean=-0.000045 rms=0.008415 Jy/beam ! Combined flux in latest and established models = 0.441383 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.441383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113328Jy sigma=0.001170 ! Fit after self-cal, rms=0.113236Jy sigma=0.001169 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.899 mas, bmaj=8.559 mas, bpa=1.185 degrees ! Estimated noise=1487.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412545 Jy ! Component: 100 - total flux cleaned = 0.0608628 Jy ! Component: 150 - total flux cleaned = 0.0722808 Jy ! Component: 200 - total flux cleaned = 0.0797711 Jy ! Total flux subtracted in 200 components = 0.0797711 Jy ! Clean residual min=-0.014535 max=0.015128 Jy/beam ! Clean residual mean=-0.000045 rms=0.004048 Jy/beam ! Combined flux in latest and established models = 0.521154 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 0.521154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096574Jy sigma=0.000996 ! Fit after self-cal, rms=0.096534Jy sigma=0.000995 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.07 ! LA 1.07 MK 1.00* NL 0.99 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.05 KP 1.00 ! LA 1.04 MK 1.00* NL 0.97 OV 1.03 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.03 KP 0.87 ! LA 0.82 MK 1.00* NL 1.20 OV 0.95 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00 KP 0.79 ! LA 0.90 MK 1.00* NL 1.08 OV 1.03 ! PT 1.03 SC 0.93 ! ! ! Fit before self-cal, rms=0.096534Jy sigma=0.000995 ! Fit after self-cal, rms=0.077607Jy sigma=0.000821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.926 mas, bmaj=8.572 mas, bpa=1.325 degrees ! Estimated noise=1476.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985863 Jy ! Component: 100 - total flux cleaned = 0.013905 Jy ! Component: 150 - total flux cleaned = 0.0155579 Jy ! Component: 200 - total flux cleaned = 0.0163376 Jy ! Total flux subtracted in 200 components = 0.0163376 Jy ! Clean residual min=-0.004893 max=0.004249 Jy/beam ! Clean residual mean=-0.000019 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.537492 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.537492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076319Jy sigma=0.000805 ! Fit after self-cal, rms=0.076328Jy sigma=0.000804 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076328Jy sigma=0.000804 ! Fit after self-cal, rms=0.076256Jy sigma=0.000804 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.925 mas, bmaj=8.577 mas, bpa=1.453 degrees ! Estimated noise=1473.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385951 Jy ! Component: 100 - total flux cleaned = 0.00013084 Jy ! Component: 150 - total flux cleaned = -0.000228602 Jy ! Component: 200 - total flux cleaned = -0.00041224 Jy ! Total flux subtracted in 200 components = -0.00041224 Jy ! Clean residual min=-0.004225 max=0.003837 Jy/beam ! Clean residual mean=-0.000019 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.53708 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.53708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076091Jy sigma=0.000802 ! Fit after self-cal, rms=0.076097Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96908e-06 Jy ! Component: 100 - total flux cleaned = 0.000156584 Jy ! Component: 150 - total flux cleaned = 0.000155729 Jy ! Component: 200 - total flux cleaned = 0.000156064 Jy ! Total flux subtracted in 200 components = 0.000156064 Jy ! Clean residual min=-0.004249 max=0.003700 Jy/beam ! Clean residual mean=-0.000019 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.537236 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.537236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076043Jy sigma=0.000801 ! Fit after self-cal, rms=0.076045Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076045Jy sigma=0.000801 ! Fit after self-cal, rms=0.076047Jy sigma=0.000801 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.923 mas, bmaj=8.584 mas, bpa=1.57 degrees ! Estimated noise=1472.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000264085 Jy ! Component: 100 - total flux cleaned = -0.000478734 Jy ! Component: 150 - total flux cleaned = -0.000554263 Jy ! Component: 200 - total flux cleaned = -0.000519573 Jy ! Total flux subtracted in 200 components = -0.000519573 Jy ! Clean residual min=-0.004014 max=0.003521 Jy/beam ! Clean residual mean=-0.000018 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.536717 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 108 components and 0.536717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076002Jy sigma=0.000801 ! Fit after self-cal, rms=0.076005Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136135 Jy ! Component: 100 - total flux cleaned = 0.000167821 Jy ! Component: 150 - total flux cleaned = 0.000168336 Jy ! Component: 200 - total flux cleaned = 0.000198955 Jy ! Total flux subtracted in 200 components = 0.000198955 Jy ! Clean residual min=-0.003970 max=0.003440 Jy/beam ! Clean residual mean=-0.000018 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.536916 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.536916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=0.000801 ! Fit after self-cal, rms=0.075979Jy sigma=0.000801 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075979Jy sigma=0.000801 ! Fit after self-cal, rms=0.075981Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=9.63 mas, bpa=-8.212 degrees ! Estimated noise=1560.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123999 Jy ! Component: 100 - total flux cleaned = 0.00170009 Jy ! Component: 150 - total flux cleaned = 0.0019381 Jy ! Component: 200 - total flux cleaned = 0.00207012 Jy ! Total flux subtracted in 200 components = 0.00207012 Jy ! Clean residual min=-0.003924 max=0.003634 Jy/beam ! Clean residual mean=-0.000023 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.538986 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 134 components and 0.538986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075979Jy sigma=0.000800 ! Fit after self-cal, rms=0.075979Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204476 Jy ! Component: 100 - total flux cleaned = 0.000230112 Jy ! Component: 150 - total flux cleaned = 0.00022977 Jy ! Component: 200 - total flux cleaned = 0.000229851 Jy ! Total flux subtracted in 200 components = 0.000229851 Jy ! Clean residual min=-0.003856 max=0.003533 Jy/beam ! Clean residual mean=-0.000023 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.539216 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 145 components and 0.539216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=0.000800 ! Fit after self-cal, rms=0.075978Jy sigma=0.000800 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.921 mas, bmaj=8.588 mas, bpa=1.63 degrees ! Estimated noise=1471.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.921 x 8.588 at 1.63 degrees (North through East) ! Clean map min=-0.0037739 max=0.44088 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.254 mas, bmaj=8.034 mas, bpa=-1.116 degrees ! Estimated noise=1841.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340602 Jy ! Component: 100 - total flux cleaned = 0.43356 Jy ! Component: 150 - total flux cleaned = 0.472905 Jy ! Component: 200 - total flux cleaned = 0.4915 Jy ! Total flux subtracted in 200 components = 0.4915 Jy ! Clean residual min=-0.008271 max=0.011033 Jy/beam ! Clean residual mean=-0.000028 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.4915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.4915 Jy ! Inverting map and beam ! Estimated beam: bmin=5.921 mas, bmaj=8.588 mas, bpa=1.63 degrees ! Estimated noise=1471.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012245 Jy ! Component: 100 - total flux cleaned = 0.0209985 Jy ! Component: 150 - total flux cleaned = 0.0275358 Jy ! Component: 200 - total flux cleaned = 0.0324804 Jy ! Total flux subtracted in 200 components = 0.0324804 Jy ! Clean residual min=-0.004434 max=0.005181 Jy/beam ! Clean residual mean=-0.000031 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.52398 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.52398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=9.63 mas, bpa=-8.212 degrees ! Estimated noise=1560.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490354 Jy ! Component: 100 - total flux cleaned = 0.00826049 Jy ! Component: 150 - total flux cleaned = 0.0107787 Jy ! Component: 200 - total flux cleaned = 0.0122745 Jy ! Total flux subtracted in 200 components = 0.0122745 Jy ! Clean residual min=-0.004350 max=0.003960 Jy/beam ! Clean residual mean=-0.000029 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.536255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757595 Jy ! Component: 100 - total flux cleaned = 0.00102754 Jy ! Component: 150 - total flux cleaned = 0.0013212 Jy ! Component: 200 - total flux cleaned = 0.00154392 Jy ! Total flux subtracted in 200 components = 0.00154392 Jy ! Clean residual min=-0.004248 max=0.003791 Jy/beam ! Clean residual mean=-0.000026 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.537799 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 94 components and 0.537799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.921 mas, bmaj=8.588 mas, bpa=1.63 degrees ! Estimated noise=1471.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015062 Jy ! Component: 100 - total flux cleaned = -0.00169801 Jy ! Component: 150 - total flux cleaned = -0.00158332 Jy ! Component: 200 - total flux cleaned = -0.00143345 Jy ! Total flux subtracted in 200 components = -0.00143345 Jy ! Clean residual min=-0.003917 max=0.003597 Jy/beam ! Clean residual mean=-0.000018 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.536365 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.536365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076057Jy sigma=0.000801 ! Fit after self-cal, rms=0.076046Jy sigma=0.000801 wmodel J1014+2301_S_2015_01_22_pus_map.mod ! Writing 113 model components to file: J1014+2301_S_2015_01_22_pus_map.mod wobs J1014+2301_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1014+2301_S_2015_01_22_pus_uvs.fits wwins J1014+2301_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1014+2301_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233904 Jy ! Component: 100 - total flux cleaned = -0.000293358 Jy ! Component: 150 - total flux cleaned = -0.000403466 Jy ! Component: 200 - total flux cleaned = -0.000985737 Jy ! Component: 250 - total flux cleaned = -0.00138938 Jy ! Component: 300 - total flux cleaned = -0.00177908 Jy ! Component: 350 - total flux cleaned = -0.00215142 Jy ! Component: 400 - total flux cleaned = -0.00228559 Jy ! Component: 450 - total flux cleaned = -0.00245422 Jy ! Component: 500 - total flux cleaned = -0.00249414 Jy ! Component: 550 - total flux cleaned = -0.00257453 Jy ! Component: 600 - total flux cleaned = -0.00276631 Jy ! Component: 650 - total flux cleaned = -0.00291352 Jy ! Component: 700 - total flux cleaned = -0.00291292 Jy ! Component: 750 - total flux cleaned = -0.00291229 Jy ! Component: 800 - total flux cleaned = -0.00301337 Jy ! Component: 850 - total flux cleaned = -0.0031442 Jy ! Component: 900 - total flux cleaned = -0.0033044 Jy ! Component: 950 - total flux cleaned = -0.00336739 Jy ! Component: 1000 - total flux cleaned = -0.0035213 Jy ! Component: 1050 - total flux cleaned = -0.00361144 Jy ! Component: 1100 - total flux cleaned = -0.00375835 Jy ! Component: 1150 - total flux cleaned = -0.003873 Jy ! Component: 1200 - total flux cleaned = -0.00395731 Jy ! Component: 1250 - total flux cleaned = -0.00409528 Jy ! Component: 1300 - total flux cleaned = -0.00423062 Jy ! Component: 1350 - total flux cleaned = -0.00441628 Jy ! Component: 1400 - total flux cleaned = -0.0045465 Jy ! Component: 1450 - total flux cleaned = -0.00464898 Jy ! Component: 1500 - total flux cleaned = -0.00475012 Jy ! Component: 1550 - total flux cleaned = -0.00492362 Jy ! Component: 1600 - total flux cleaned = -0.00509344 Jy ! Component: 1650 - total flux cleaned = -0.00514094 Jy ! Component: 1700 - total flux cleaned = -0.0052354 Jy ! Component: 1750 - total flux cleaned = -0.00525894 Jy ! Component: 1800 - total flux cleaned = -0.00530512 Jy ! Component: 1850 - total flux cleaned = -0.00535061 Jy ! Component: 1900 - total flux cleaned = -0.00539512 Jy ! Component: 1950 - total flux cleaned = -0.00541703 Jy ! Component: 2000 - total flux cleaned = -0.00541724 Jy ! Component: 2050 - total flux cleaned = -0.0054599 Jy ! Component: 2100 - total flux cleaned = -0.00548089 Jy ! Component: 2150 - total flux cleaned = -0.00548086 Jy ! Component: 2200 - total flux cleaned = -0.00548092 Jy ! Component: 2250 - total flux cleaned = -0.00544026 Jy ! Component: 2300 - total flux cleaned = -0.00542009 Jy ! Component: 2350 - total flux cleaned = -0.00538038 Jy ! Component: 2400 - total flux cleaned = -0.00540008 Jy ! Component: 2450 - total flux cleaned = -0.00540024 Jy ! Component: 2500 - total flux cleaned = -0.00543892 Jy ! Component: 2550 - total flux cleaned = -0.00549652 Jy ! Component: 2600 - total flux cleaned = -0.00547745 Jy ! Component: 2650 - total flux cleaned = -0.00549645 Jy ! Component: 2700 - total flux cleaned = -0.00555284 Jy ! Component: 2750 - total flux cleaned = -0.00555288 Jy ! Component: 2800 - total flux cleaned = -0.00557147 Jy ! Component: 2850 - total flux cleaned = -0.0056451 Jy ! Component: 2900 - total flux cleaned = -0.00560853 Jy ! Component: 2950 - total flux cleaned = -0.00566323 Jy ! Component: 3000 - total flux cleaned = -0.00566332 Jy ! Component: 3050 - total flux cleaned = -0.0056814 Jy ! Component: 3100 - total flux cleaned = -0.00573514 Jy ! Component: 3150 - total flux cleaned = -0.0057351 Jy ! Component: 3200 - total flux cleaned = -0.00573515 Jy ! Component: 3250 - total flux cleaned = -0.0057529 Jy ! Component: 3300 - total flux cleaned = -0.00569996 Jy ! Component: 3350 - total flux cleaned = -0.00573518 Jy ! Component: 3400 - total flux cleaned = -0.00573515 Jy ! Component: 3450 - total flux cleaned = -0.00573527 Jy ! Component: 3500 - total flux cleaned = -0.00577006 Jy ! Component: 3550 - total flux cleaned = -0.005718 Jy ! Component: 3600 - total flux cleaned = -0.00571807 Jy ! Component: 3650 - total flux cleaned = -0.00570086 Jy ! Component: 3700 - total flux cleaned = -0.00573522 Jy ! Component: 3750 - total flux cleaned = -0.00576953 Jy ! Component: 3800 - total flux cleaned = -0.00573541 Jy ! Component: 3850 - total flux cleaned = -0.00580352 Jy ! Component: 3900 - total flux cleaned = -0.00582059 Jy ! Component: 3950 - total flux cleaned = -0.0058037 Jy ! Component: 4000 - total flux cleaned = -0.00582072 Jy ! Component: 4050 - total flux cleaned = -0.00582069 Jy ! Total flux subtracted in 4096 components = -0.00583757 Jy ! Clean residual min=-0.001324 max=0.001023 Jy/beam ! Clean residual mean=-0.000006 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.530527 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 350 components and 0.530528 Jy ![Exited script file: muppet] wmap "J1014+2301_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.921 x 8.588 at 1.63 degrees (North through East) ! Clean map min=-0.0028794 max=0.44006 Jy/beam ! Writing clean map to FITS file: J1014+2301_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.440064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.190675 0.190675 0.381351 0.762702 1.5254 3.05081 6.10161 12.2032 24.4064 48.8129 97.6258 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.44 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.921 x 8.588 at 1.63 degrees (North through East) ! Clean map min=-0.0028794 max=0.44006 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1014+2301_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:50:14 2017