! Started logfile: J1007-1247_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:54 2017 obs J1007-1247_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1007-1247_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.679412 visibilities/baseline/integration-bin. ! Found source: J1007-1247 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1007-1247_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813219Jy sigma=0.010003 ! Fit after self-cal, rms=0.761025Jy sigma=0.009404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.08 mas, bpa=-4.054 degrees ! Estimated noise=931.962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181785 Jy ! Component: 100 - total flux cleaned = 0.237298 Jy ! Total flux subtracted in 100 components = 0.237298 Jy ! Clean residual min=-0.011958 max=0.022940 Jy/beam ! Clean residual mean=0.000097 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.237298 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.237298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195666Jy sigma=0.001197 ! Fit after self-cal, rms=0.195555Jy sigma=0.001195 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=6.851 mas, bpa=-2.326 degrees ! Estimated noise=667.938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277936 Jy ! Component: 100 - total flux cleaned = 0.0403948 Jy ! Component: 150 - total flux cleaned = 0.0467427 Jy ! Component: 200 - total flux cleaned = 0.0501799 Jy ! Total flux subtracted in 200 components = 0.0501799 Jy ! Clean residual min=-0.012510 max=0.016216 Jy/beam ! Clean residual mean=0.000054 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 0.287478 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.287478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188071Jy sigma=0.001159 ! Fit after self-cal, rms=0.188056Jy sigma=0.001159 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.87 KP 1.00* LA 1.01 ! MK 0.97 NL 1.03 OV 0.95 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 KP 1.00* LA 1.01 ! MK 0.93 NL 1.12 OV 1.01 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.15 KP 1.00* LA 0.81 ! MK 0.97 NL 1.06 OV 0.94 PT 0.95 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.03 KP 1.00* LA 0.89 ! MK 0.97 NL 1.13 OV 1.00 PT 1.02 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.188056Jy sigma=0.001159 ! Fit after self-cal, rms=0.184636Jy sigma=0.001089 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=6.893 mas, bpa=-3.021 degrees ! Estimated noise=682.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665497 Jy ! Component: 100 - total flux cleaned = 0.00740452 Jy ! Component: 150 - total flux cleaned = 0.00753463 Jy ! Component: 200 - total flux cleaned = 0.00744374 Jy ! Total flux subtracted in 200 components = 0.00744374 Jy ! Clean residual min=-0.013528 max=0.011735 Jy/beam ! Clean residual mean=0.000047 rms=0.003141 Jy/beam ! Combined flux in latest and established models = 0.294922 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.294922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183592Jy sigma=0.001090 ! Fit after self-cal, rms=0.183469Jy sigma=0.001090 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183469Jy sigma=0.001090 ! Fit after self-cal, rms=0.093754Jy sigma=0.000987 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=6.878 mas, bpa=-3.39 degrees ! Estimated noise=684.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330609 Jy ! Component: 100 - total flux cleaned = 0.00375474 Jy ! Component: 150 - total flux cleaned = 0.00387172 Jy ! Component: 200 - total flux cleaned = 0.00396723 Jy ! Total flux subtracted in 200 components = 0.00396723 Jy ! Clean residual min=-0.005502 max=0.009342 Jy/beam ! Clean residual mean=0.000009 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.298889 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.298889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093516Jy sigma=0.000987 ! Fit after self-cal, rms=0.093447Jy sigma=0.000986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00862788 Jy ! Component: 100 - total flux cleaned = 0.0110143 Jy ! Component: 150 - total flux cleaned = 0.0111415 Jy ! Component: 200 - total flux cleaned = 0.0110343 Jy ! Total flux subtracted in 200 components = 0.0110343 Jy ! Clean residual min=-0.005370 max=0.004601 Jy/beam ! Clean residual mean=0.000008 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.309924 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.309924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092545Jy sigma=0.000976 ! Fit after self-cal, rms=0.092497Jy sigma=0.000975 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092497Jy sigma=0.000975 ! Fit after self-cal, rms=0.092682Jy sigma=0.000974 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=6.842 mas, bpa=-3.554 degrees ! Estimated noise=686.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400932 Jy ! Component: 100 - total flux cleaned = 0.00535539 Jy ! Component: 150 - total flux cleaned = 0.00586559 Jy ! Component: 200 - total flux cleaned = 0.00616554 Jy ! Total flux subtracted in 200 components = 0.00616554 Jy ! Clean residual min=-0.004500 max=0.003653 Jy/beam ! Clean residual mean=0.000011 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.316089 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.316089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092337Jy sigma=0.000973 ! Fit after self-cal, rms=0.092330Jy sigma=0.000973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907905 Jy ! Component: 100 - total flux cleaned = 0.000971212 Jy ! Component: 150 - total flux cleaned = 0.00102876 Jy ! Component: 200 - total flux cleaned = 0.00107909 Jy ! Total flux subtracted in 200 components = 0.00107909 Jy ! Clean residual min=-0.004481 max=0.003425 Jy/beam ! Clean residual mean=0.000009 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.317168 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.317168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092207Jy sigma=0.000973 ! Fit after self-cal, rms=0.092206Jy sigma=0.000973 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092206Jy sigma=0.000973 ! Fit after self-cal, rms=0.093146Jy sigma=0.000972 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=14.2 mas, bpa=3.731 degrees ! Estimated noise=877.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035234 Jy ! Component: 100 - total flux cleaned = 0.00399357 Jy ! Component: 150 - total flux cleaned = 0.00399598 Jy ! Component: 200 - total flux cleaned = 0.00404529 Jy ! Total flux subtracted in 200 components = 0.00404529 Jy ! Clean residual min=-0.006144 max=0.004744 Jy/beam ! Clean residual mean=0.000028 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.321214 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 0.321214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092931Jy sigma=0.000972 ! Fit after self-cal, rms=0.092906Jy sigma=0.000972 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554603 Jy ! Component: 100 - total flux cleaned = 0.000354017 Jy ! Component: 150 - total flux cleaned = 0.000210632 Jy ! Component: 200 - total flux cleaned = 0.000178726 Jy ! Total flux subtracted in 200 components = 0.000178726 Jy ! Clean residual min=-0.006345 max=0.004754 Jy/beam ! Clean residual mean=0.000027 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.321392 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.321392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092874Jy sigma=0.000973 ! Fit after self-cal, rms=0.092865Jy sigma=0.000973 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=6.827 mas, bpa=-3.617 degrees ! Estimated noise=691.624 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 6.827 at -3.617 degrees (North through East) ! Clean map min=-0.004297 max=0.24058 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.548 mas, bmaj=6.095 mas, bpa=-5.224 degrees ! Estimated noise=965.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189932 Jy ! Component: 100 - total flux cleaned = 0.252639 Jy ! Component: 150 - total flux cleaned = 0.278747 Jy ! Component: 200 - total flux cleaned = 0.293729 Jy ! Total flux subtracted in 200 components = 0.293729 Jy ! Clean residual min=-0.008186 max=0.010138 Jy/beam ! Clean residual mean=0.000050 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.293729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.293729 Jy ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=6.827 mas, bpa=-3.617 degrees ! Estimated noise=691.624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120103 Jy ! Component: 100 - total flux cleaned = 0.0194728 Jy ! Component: 150 - total flux cleaned = 0.024033 Jy ! Component: 200 - total flux cleaned = 0.025469 Jy ! Total flux subtracted in 200 components = 0.025469 Jy ! Clean residual min=-0.005398 max=0.004112 Jy/beam ! Clean residual mean=0.000017 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.319198 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 45 components and 0.319198 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=14.2 mas, bpa=3.731 degrees ! Estimated noise=877.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253022 Jy ! Component: 100 - total flux cleaned = 0.00314212 Jy ! Component: 150 - total flux cleaned = 0.00313898 Jy ! Component: 200 - total flux cleaned = 0.00313835 Jy ! Total flux subtracted in 200 components = 0.00313835 Jy ! Clean residual min=-0.006322 max=0.004834 Jy/beam ! Clean residual mean=0.000029 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.322336 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.3025e-07 Jy ! Component: 100 - total flux cleaned = -3.07881e-06 Jy ! Component: 150 - total flux cleaned = -7.38781e-06 Jy ! Component: 200 - total flux cleaned = -6.64739e-05 Jy ! Total flux subtracted in 200 components = -6.64739e-05 Jy ! Clean residual min=-0.006319 max=0.004806 Jy/beam ! Clean residual mean=0.000028 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.32227 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.32227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=6.827 mas, bpa=-3.617 degrees ! Estimated noise=691.624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296467 Jy ! Component: 100 - total flux cleaned = 0.000765773 Jy ! Component: 150 - total flux cleaned = 0.00107574 Jy ! Component: 200 - total flux cleaned = 0.00127568 Jy ! Total flux subtracted in 200 components = 0.00127568 Jy ! Clean residual min=-0.004700 max=0.003432 Jy/beam ! Clean residual mean=0.000010 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.323545 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.323545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092902Jy sigma=0.000973 ! Fit after self-cal, rms=0.092895Jy sigma=0.000973 wmodel J1007-1247_S_2014_01_04_pus_map.mod ! Writing 79 model components to file: J1007-1247_S_2014_01_04_pus_map.mod wobs J1007-1247_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1007-1247_S_2014_01_04_pus_uvs.fits wwins J1007-1247_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1007-1247_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199246 Jy ! Component: 100 - total flux cleaned = -0.00366605 Jy ! Component: 150 - total flux cleaned = -0.00493793 Jy ! Component: 200 - total flux cleaned = -0.00601289 Jy ! Component: 250 - total flux cleaned = -0.00638842 Jy ! Component: 300 - total flux cleaned = -0.00674295 Jy ! Component: 350 - total flux cleaned = -0.00683956 Jy ! Component: 400 - total flux cleaned = -0.00674773 Jy ! Component: 450 - total flux cleaned = -0.00683788 Jy ! Component: 500 - total flux cleaned = -0.00692419 Jy ! Component: 550 - total flux cleaned = -0.00675744 Jy ! Component: 600 - total flux cleaned = -0.00667639 Jy ! Component: 650 - total flux cleaned = -0.00663666 Jy ! Component: 700 - total flux cleaned = -0.00644516 Jy ! Component: 750 - total flux cleaned = -0.00637121 Jy ! Component: 800 - total flux cleaned = -0.00629951 Jy ! Component: 850 - total flux cleaned = -0.00622897 Jy ! Component: 900 - total flux cleaned = -0.00626289 Jy ! Component: 950 - total flux cleaned = -0.00606084 Jy ! Component: 1000 - total flux cleaned = -0.00602906 Jy ! Component: 1050 - total flux cleaned = -0.00599727 Jy ! Component: 1100 - total flux cleaned = -0.00587086 Jy ! Component: 1150 - total flux cleaned = -0.00571694 Jy ! Component: 1200 - total flux cleaned = -0.00571717 Jy ! Component: 1250 - total flux cleaned = -0.00556804 Jy ! Component: 1300 - total flux cleaned = -0.00539317 Jy ! Component: 1350 - total flux cleaned = -0.00525083 Jy ! Component: 1400 - total flux cleaned = -0.00516569 Jy ! Component: 1450 - total flux cleaned = -0.00497248 Jy ! Component: 1500 - total flux cleaned = -0.00486517 Jy ! Component: 1550 - total flux cleaned = -0.00478549 Jy ! Component: 1600 - total flux cleaned = -0.00470714 Jy ! Component: 1650 - total flux cleaned = -0.00463006 Jy ! Component: 1700 - total flux cleaned = -0.00450323 Jy ! Component: 1750 - total flux cleaned = -0.0044529 Jy ! Component: 1800 - total flux cleaned = -0.0042815 Jy ! Component: 1850 - total flux cleaned = -0.00425776 Jy ! Component: 1900 - total flux cleaned = -0.00423374 Jy ! Component: 1950 - total flux cleaned = -0.00418698 Jy ! Component: 2000 - total flux cleaned = -0.00407187 Jy ! Component: 2050 - total flux cleaned = -0.00404945 Jy ! Component: 2100 - total flux cleaned = -0.00402708 Jy ! Component: 2150 - total flux cleaned = -0.00402668 Jy ! Component: 2200 - total flux cleaned = -0.00396109 Jy ! Component: 2250 - total flux cleaned = -0.00391812 Jy ! Component: 2300 - total flux cleaned = -0.00389653 Jy ! Component: 2350 - total flux cleaned = -0.0038544 Jy ! Component: 2400 - total flux cleaned = -0.00391697 Jy ! Component: 2450 - total flux cleaned = -0.003896 Jy ! Component: 2500 - total flux cleaned = -0.00393698 Jy ! Component: 2550 - total flux cleaned = -0.00393676 Jy ! Component: 2600 - total flux cleaned = -0.00389678 Jy ! Component: 2650 - total flux cleaned = -0.00391647 Jy ! Component: 2700 - total flux cleaned = -0.00389675 Jy ! Component: 2750 - total flux cleaned = -0.00387778 Jy ! Component: 2800 - total flux cleaned = -0.00387773 Jy ! Component: 2850 - total flux cleaned = -0.00391566 Jy ! Component: 2900 - total flux cleaned = -0.00391529 Jy ! Component: 2950 - total flux cleaned = -0.00385935 Jy ! Component: 3000 - total flux cleaned = -0.00384086 Jy ! Component: 3050 - total flux cleaned = -0.00384089 Jy ! Component: 3100 - total flux cleaned = -0.00382254 Jy ! Component: 3150 - total flux cleaned = -0.00371527 Jy ! Component: 3200 - total flux cleaned = -0.0037154 Jy ! Component: 3250 - total flux cleaned = -0.00364521 Jy ! Component: 3300 - total flux cleaned = -0.00362763 Jy ! Component: 3350 - total flux cleaned = -0.00355835 Jy ! Component: 3400 - total flux cleaned = -0.00357548 Jy ! Component: 3450 - total flux cleaned = -0.00360947 Jy ! Component: 3500 - total flux cleaned = -0.00354173 Jy ! Component: 3550 - total flux cleaned = -0.00349141 Jy ! Component: 3600 - total flux cleaned = -0.00345788 Jy ! Component: 3650 - total flux cleaned = -0.00340812 Jy ! Component: 3700 - total flux cleaned = -0.00332618 Jy ! Component: 3750 - total flux cleaned = -0.00329368 Jy ! Component: 3800 - total flux cleaned = -0.00329372 Jy ! Component: 3850 - total flux cleaned = -0.00327762 Jy ! Component: 3900 - total flux cleaned = -0.00324564 Jy ! Component: 3950 - total flux cleaned = -0.00330923 Jy ! Component: 4000 - total flux cleaned = -0.0032933 Jy ! Component: 4050 - total flux cleaned = -0.00324609 Jy ! Total flux subtracted in 4096 components = -0.00324616 Jy ! Clean residual min=-0.001301 max=0.000980 Jy/beam ! Clean residual mean=0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.320299 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 386 components and 0.320299 Jy ![Exited script file: muppet] wmap "J1007-1247_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 6.827 at -3.617 degrees (North through East) ! Clean map min=-0.0031511 max=0.24065 Jy/beam ! Writing clean map to FITS file: J1007-1247_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.32672 0.32672 0.65344 1.30688 2.61376 5.22752 10.455 20.9101 41.8201 83.6403 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 6.827 at -3.617 degrees (North through East) ! Clean map min=-0.0031511 max=0.24065 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1007-1247_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:58 2017