! Started logfile: J1003+3244_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:01:36 2016 obs J1003+3244_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1003+3244_S_2014_08_09_pus_uva.fits ! AN table 1: 105 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764868 visibilities/baseline/integration-bin. ! Found source: J1003+3244 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 14456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1003+3244_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952358Jy sigma=0.010628 ! Fit after self-cal, rms=0.926591Jy sigma=0.010364 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=4.857 mas, bpa=-4.904 degrees ! Estimated noise=1000.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518051 Jy ! Component: 100 - total flux cleaned = 0.0709699 Jy ! Total flux subtracted in 100 components = 0.0709699 Jy ! Clean residual min=-0.008207 max=0.022051 Jy/beam ! Clean residual mean=-0.000017 rms=0.002597 Jy/beam ! Combined flux in latest and established models = 0.0709699 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0709699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092321Jy sigma=0.000974 ! Fit after self-cal, rms=0.092071Jy sigma=0.000971 ! Inverting map ! Added new window around map position (3.5, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204605 Jy ! Component: 100 - total flux cleaned = 0.0328874 Jy ! Total flux subtracted in 100 components = 0.0328874 Jy ! Clean residual min=-0.006741 max=0.008533 Jy/beam ! Clean residual mean=-0.000016 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.103857 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.103857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085147Jy sigma=0.000888 ! Fit after self-cal, rms=0.084453Jy sigma=0.000880 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=5.829 mas, bpa=-4.067 degrees ! Estimated noise=534.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180147 Jy ! Component: 100 - total flux cleaned = 0.0300024 Jy ! Component: 150 - total flux cleaned = 0.0387268 Jy ! Component: 200 - total flux cleaned = 0.0451873 Jy ! Total flux subtracted in 200 components = 0.0451873 Jy ! Clean residual min=-0.005481 max=0.009456 Jy/beam ! Clean residual mean=-0.000037 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.149045 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 80 components and 0.149044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079606Jy sigma=0.000824 ! Fit after self-cal, rms=0.079346Jy sigma=0.000821 ! Inverting map ! Added new window around map position (8, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973082 Jy ! Component: 100 - total flux cleaned = 0.0152867 Jy ! Component: 150 - total flux cleaned = 0.0194654 Jy ! Component: 200 - total flux cleaned = 0.0227898 Jy ! Total flux subtracted in 200 components = 0.0227898 Jy ! Clean residual min=-0.004232 max=0.004792 Jy/beam ! Clean residual mean=-0.000028 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.171834 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 125 components and 0.171834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077998Jy sigma=0.000805 ! Fit after self-cal, rms=0.077716Jy sigma=0.000802 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.03 KP 1.07 ! LA 1.06 MK 0.95 NL 1.05 OV 0.98 ! PT 0.93 SC 0.87 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 1.10 KP 1.06 ! LA 0.99 MK 1.01 NL 1.06 OV 1.06 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.14 HN 1.04 KP 0.96 ! LA 0.81 MK 0.99 NL 1.00 OV 0.96 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.98 HN 1.01 KP 0.92 ! LA 0.78 MK 1.00 NL 1.15 OV 0.99 ! PT 0.98 SC 0.95 ! ! ! Fit before self-cal, rms=0.077716Jy sigma=0.000802 ! Fit after self-cal, rms=0.075102Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=5.836 mas, bpa=-3.227 degrees ! Estimated noise=530.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435523 Jy ! Component: 100 - total flux cleaned = 0.00724799 Jy ! Component: 150 - total flux cleaned = 0.00943231 Jy ! Component: 200 - total flux cleaned = 0.0111512 Jy ! Total flux subtracted in 200 components = 0.0111512 Jy ! Clean residual min=-0.002737 max=0.002739 Jy/beam ! Clean residual mean=-0.000004 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.182986 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 0.182986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074804Jy sigma=0.000787 ! Fit after self-cal, rms=0.074745Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074745Jy sigma=0.000787 ! Fit after self-cal, rms=0.073785Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=5.837 mas, bpa=-3.536 degrees ! Estimated noise=527.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018649 Jy ! Component: 100 - total flux cleaned = 0.00264062 Jy ! Component: 150 - total flux cleaned = 0.00321539 Jy ! Component: 200 - total flux cleaned = 0.00367806 Jy ! Total flux subtracted in 200 components = 0.00367806 Jy ! Clean residual min=-0.002489 max=0.002742 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.186664 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 179 components and 0.186664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073709Jy sigma=0.000784 ! Fit after self-cal, rms=0.073690Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247741 Jy ! Component: 100 - total flux cleaned = 0.00357882 Jy ! Component: 150 - total flux cleaned = 0.00401535 Jy ! Component: 200 - total flux cleaned = 0.00440658 Jy ! Total flux subtracted in 200 components = 0.00440658 Jy ! Clean residual min=-0.002310 max=0.002525 Jy/beam ! Clean residual mean=-0.000002 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.19107 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 208 components and 0.19107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073595Jy sigma=0.000783 ! Fit after self-cal, rms=0.073578Jy sigma=0.000783 ! Inverting map ! Added new window around map position (26.5, -88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209322 Jy ! Component: 100 - total flux cleaned = 0.00262282 Jy ! Component: 150 - total flux cleaned = 0.00330964 Jy ! Component: 200 - total flux cleaned = 0.00395916 Jy ! Total flux subtracted in 200 components = 0.00395916 Jy ! Clean residual min=-0.001944 max=0.001802 Jy/beam ! Clean residual mean=0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.195029 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 228 components and 0.195029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073490Jy sigma=0.000782 ! Fit after self-cal, rms=0.073475Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073475Jy sigma=0.000782 ! Fit after self-cal, rms=0.073346Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=5.83 mas, bpa=-3.8 degrees ! Estimated noise=525.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100435 Jy ! Component: 100 - total flux cleaned = 0.00170304 Jy ! Component: 150 - total flux cleaned = 0.00222259 Jy ! Component: 200 - total flux cleaned = 0.00266458 Jy ! Total flux subtracted in 200 components = 0.00266458 Jy ! Clean residual min=-0.001837 max=0.001678 Jy/beam ! Clean residual mean=-0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.197694 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 237 components and 0.197694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073313Jy sigma=0.000781 ! Fit after self-cal, rms=0.073312Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382213 Jy ! Component: 100 - total flux cleaned = 0.000825918 Jy ! Component: 150 - total flux cleaned = 0.00110002 Jy ! Component: 200 - total flux cleaned = 0.00133225 Jy ! Total flux subtracted in 200 components = 0.00133225 Jy ! Clean residual min=-0.001782 max=0.001643 Jy/beam ! Clean residual mean=0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.199026 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 251 components and 0.199026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073292Jy sigma=0.000781 ! Fit after self-cal, rms=0.073290Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073290Jy sigma=0.000781 ! Fit after self-cal, rms=0.073372Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=9.375 mas, bpa=1.049 degrees ! Estimated noise=645.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120791 Jy ! Component: 100 - total flux cleaned = 0.00193484 Jy ! Component: 150 - total flux cleaned = 0.00251665 Jy ! Component: 200 - total flux cleaned = 0.00290137 Jy ! Total flux subtracted in 200 components = 0.00290137 Jy ! Clean residual min=-0.001994 max=0.001874 Jy/beam ! Clean residual mean=0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.201928 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 276 components and 0.201927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073361Jy sigma=0.000781 ! Fit after self-cal, rms=0.073357Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340416 Jy ! Component: 100 - total flux cleaned = 0.00071367 Jy ! Component: 150 - total flux cleaned = 0.000929029 Jy ! Component: 200 - total flux cleaned = 0.0010643 Jy ! Total flux subtracted in 200 components = 0.0010643 Jy ! Clean residual min=-0.001972 max=0.001851 Jy/beam ! Clean residual mean=0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.202992 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 287 components and 0.202992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073350Jy sigma=0.000781 ! Fit after self-cal, rms=0.073347Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.834 mas, bpa=-3.952 degrees ! Estimated noise=525.503 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.778 x 5.834 at -3.952 degrees (North through East) ! Clean map min=-0.0018992 max=0.068451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=4.848 mas, bpa=-4.566 degrees ! Estimated noise=1000.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523797 Jy ! Component: 100 - total flux cleaned = 0.0773739 Jy ! Component: 150 - total flux cleaned = 0.0954162 Jy ! Component: 200 - total flux cleaned = 0.109396 Jy ! Total flux subtracted in 200 components = 0.109396 Jy ! Clean residual min=-0.005467 max=0.008202 Jy/beam ! Clean residual mean=-0.000011 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.109396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.109396 Jy ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.834 mas, bpa=-3.952 degrees ! Estimated noise=525.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168678 Jy ! Component: 100 - total flux cleaned = 0.0284656 Jy ! Component: 150 - total flux cleaned = 0.0369068 Jy ! Component: 200 - total flux cleaned = 0.0433873 Jy ! Total flux subtracted in 200 components = 0.0433873 Jy ! Clean residual min=-0.003767 max=0.003913 Jy/beam ! Clean residual mean=-0.000021 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.152783 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 123 components and 0.152783 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=9.375 mas, bpa=1.049 degrees ! Estimated noise=645.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00916315 Jy ! Component: 100 - total flux cleaned = 0.0157125 Jy ! Component: 150 - total flux cleaned = 0.0207268 Jy ! Component: 200 - total flux cleaned = 0.0247907 Jy ! Total flux subtracted in 200 components = 0.0247907 Jy ! Clean residual min=-0.003504 max=0.003220 Jy/beam ! Clean residual mean=-0.000021 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.177574 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338907 Jy ! Component: 100 - total flux cleaned = 0.00624707 Jy ! Component: 150 - total flux cleaned = 0.00870162 Jy ! Component: 200 - total flux cleaned = 0.0108317 Jy ! Total flux subtracted in 200 components = 0.0108317 Jy ! Clean residual min=-0.002630 max=0.002374 Jy/beam ! Clean residual mean=-0.000010 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.188405 Jy ! Adding 113 model components to the UV plane model. ! The established model now contains 222 components and 0.188405 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.834 mas, bpa=-3.952 degrees ! Estimated noise=525.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145354 Jy ! Component: 100 - total flux cleaned = 0.00283774 Jy ! Component: 150 - total flux cleaned = 0.004115 Jy ! Component: 200 - total flux cleaned = 0.0050445 Jy ! Total flux subtracted in 200 components = 0.0050445 Jy ! Clean residual min=-0.002118 max=0.001884 Jy/beam ! Clean residual mean=-0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.19345 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 251 components and 0.19345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073496Jy sigma=0.000782 ! Fit after self-cal, rms=0.073435Jy sigma=0.000782 wmodel J1003+3244_S_2014_08_09_pus_map.mod ! Writing 251 model components to file: J1003+3244_S_2014_08_09_pus_map.mod wobs J1003+3244_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1003+3244_S_2014_08_09_pus_uvs.fits wwins J1003+3244_S_2014_08_09_pus_map.win ! wwins: Wrote 6 windows to J1003+3244_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246792 Jy ! Component: 100 - total flux cleaned = 0.000248181 Jy ! Component: 150 - total flux cleaned = 7.37631e-05 Jy ! Component: 200 - total flux cleaned = -9.98245e-06 Jy ! Component: 250 - total flux cleaned = -3.6683e-05 Jy ! Component: 300 - total flux cleaned = -0.000165132 Jy ! Component: 350 - total flux cleaned = -0.000265208 Jy ! Component: 400 - total flux cleaned = -0.000338365 Jy ! Component: 450 - total flux cleaned = -0.000314298 Jy ! Component: 500 - total flux cleaned = -0.000383995 Jy ! Component: 550 - total flux cleaned = -0.000451538 Jy ! Component: 600 - total flux cleaned = -0.000451044 Jy ! Component: 650 - total flux cleaned = -0.000451272 Jy ! Component: 700 - total flux cleaned = -0.000472888 Jy ! Component: 750 - total flux cleaned = -0.000473148 Jy ! Component: 800 - total flux cleaned = -0.000473182 Jy ! Component: 850 - total flux cleaned = -0.000473189 Jy ! Component: 900 - total flux cleaned = -0.000375283 Jy ! Component: 950 - total flux cleaned = -0.000356412 Jy ! Component: 1000 - total flux cleaned = -0.000281574 Jy ! Component: 1050 - total flux cleaned = -0.000244753 Jy ! Component: 1100 - total flux cleaned = -0.000154631 Jy ! Component: 1150 - total flux cleaned = -0.000101903 Jy ! Component: 1200 - total flux cleaned = -4.96417e-05 Jy ! Component: 1250 - total flux cleaned = -4.98719e-05 Jy ! Component: 1300 - total flux cleaned = 6.1314e-07 Jy ! Component: 1350 - total flux cleaned = 6.17913e-07 Jy ! Component: 1400 - total flux cleaned = 9.79509e-05 Jy ! Component: 1450 - total flux cleaned = 6.5164e-05 Jy ! Component: 1500 - total flux cleaned = 9.64162e-05 Jy ! Component: 1550 - total flux cleaned = 6.54156e-05 Jy ! Component: 1600 - total flux cleaned = 5.04649e-05 Jy ! Component: 1650 - total flux cleaned = 0.000111045 Jy ! Component: 1700 - total flux cleaned = 6.65638e-05 Jy ! Component: 1750 - total flux cleaned = 0.000125079 Jy ! Component: 1800 - total flux cleaned = 0.000168239 Jy ! Component: 1850 - total flux cleaned = 0.000182452 Jy ! Component: 1900 - total flux cleaned = 0.000210499 Jy ! Component: 1950 - total flux cleaned = 0.000251939 Jy ! Component: 2000 - total flux cleaned = 0.000224558 Jy ! Component: 2050 - total flux cleaned = 0.000292176 Jy ! Component: 2100 - total flux cleaned = 0.000318815 Jy ! Component: 2150 - total flux cleaned = 0.000371993 Jy ! Component: 2200 - total flux cleaned = 0.000384896 Jy ! Component: 2250 - total flux cleaned = 0.00046214 Jy ! Component: 2300 - total flux cleaned = 0.00042381 Jy ! Component: 2350 - total flux cleaned = 0.000436595 Jy ! Component: 2400 - total flux cleaned = 0.000448993 Jy ! Component: 2450 - total flux cleaned = 0.00051043 Jy ! Component: 2500 - total flux cleaned = 0.000522351 Jy ! Component: 2550 - total flux cleaned = 0.000534508 Jy ! Component: 2600 - total flux cleaned = 0.000570539 Jy ! Component: 2650 - total flux cleaned = 0.000605988 Jy ! Component: 2700 - total flux cleaned = 0.000629332 Jy ! Component: 2750 - total flux cleaned = 0.000652412 Jy ! Component: 2800 - total flux cleaned = 0.000709658 Jy ! Component: 2850 - total flux cleaned = 0.0007209 Jy ! Component: 2900 - total flux cleaned = 0.000720904 Jy ! Component: 2950 - total flux cleaned = 0.000709839 Jy ! Component: 3000 - total flux cleaned = 0.000687934 Jy ! Component: 3050 - total flux cleaned = 0.0007207 Jy ! Component: 3100 - total flux cleaned = 0.000774492 Jy ! Component: 3150 - total flux cleaned = 0.00069966 Jy ! Component: 3200 - total flux cleaned = 0.000720913 Jy ! Component: 3250 - total flux cleaned = 0.000741983 Jy ! Component: 3300 - total flux cleaned = 0.000741956 Jy ! Component: 3350 - total flux cleaned = 0.000741955 Jy ! Component: 3400 - total flux cleaned = 0.00074169 Jy ! Component: 3450 - total flux cleaned = 0.000792239 Jy ! Component: 3500 - total flux cleaned = 0.000742243 Jy ! Component: 3550 - total flux cleaned = 0.000742343 Jy ! Component: 3600 - total flux cleaned = 0.000791433 Jy ! Component: 3650 - total flux cleaned = 0.000791462 Jy ! Component: 3700 - total flux cleaned = 0.000791484 Jy ! Component: 3750 - total flux cleaned = 0.000801097 Jy ! Component: 3800 - total flux cleaned = 0.000810605 Jy ! Component: 3850 - total flux cleaned = 0.000829554 Jy ! Component: 3900 - total flux cleaned = 0.00085766 Jy ! Component: 3950 - total flux cleaned = 0.000894748 Jy ! Component: 4000 - total flux cleaned = 0.000894731 Jy ! Component: 4050 - total flux cleaned = 0.000903857 Jy ! Total flux subtracted in 4096 components = 0.000922042 Jy ! Clean residual min=-0.000519 max=0.000642 Jy/beam ! Clean residual mean=0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.194372 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 541 components and 0.194372 Jy ![Exited script file: muppet] wmap "J1003+3244_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.778 x 5.834 at -3.952 degrees (North through East) ! Clean map min=-0.0012872 max=0.070048 Jy/beam ! Writing clean map to FITS file: J1003+3244_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0700482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164009 device "J1003+3244_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1003+3244_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.702414 0.702414 1.40483 2.80966 5.61931 11.2386 22.4772 44.9545 89.909 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.778 x 5.834 at -3.952 degrees (North through East) ! Clean map min=-0.0012872 max=0.070048 Jy/beam quit ! Quitting program ! Log file J1003+3244_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:01:43 2016