! Started logfile: J0958-4110_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:23:30 2016
obs J0958-4110_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0958-4110_S_2014_08_05_pus_uva.fits
! AN table 1: 112 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.409127 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0958-4110
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 8248 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0958-4110_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 407 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 407 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 407 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 407 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.836177Jy  sigma=0.005080
! Fit after  self-cal, rms=0.736996Jy  sigma=0.004455
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=19.67 mas, bpa=0.9814 degrees
! Estimated noise=2000.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191047 Jy
! Component: 100  -  total flux cleaned = 0.281368 Jy
! Total flux subtracted in 100 components = 0.281368 Jy
! Clean residual min=-0.022918 max=0.049017 Jy/beam
! Clean residual mean=-0.000144 rms=0.009085 Jy/beam
! Combined flux in latest and established models = 0.281368 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.281368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193538Jy  sigma=0.001151
! Fit after  self-cal, rms=0.192125Jy  sigma=0.001147
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.497 mas, bmaj=23.87 mas, bpa=0.665 degrees
! Estimated noise=1259.92 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0921316 Jy
! Component: 100  -  total flux cleaned = 0.134398 Jy
! Component: 150  -  total flux cleaned = 0.155959 Jy
! Component: 200  -  total flux cleaned = 0.167873 Jy
! Total flux subtracted in 200 components = 0.167873 Jy
! Clean residual min=-0.011517 max=0.016728 Jy/beam
! Clean residual mean=-0.000029 rms=0.003762 Jy/beam
! Combined flux in latest and established models = 0.449241 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 126 components and 0.449241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151548Jy  sigma=0.000825
! Fit after  self-cal, rms=0.148997Jy  sigma=0.000821
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.87     HN        1.45     KP        1.05     
!   LA        1.10     MK        1.00*    NL        1.19     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        1.59     KP        0.99     
!   LA        1.06     MK        1.00*    NL        1.17     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.18     HN        1.66     KP        0.89     
!   LA        0.83     MK        1.00*    NL        1.16     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        1.39     KP        0.85     
!   LA        0.80     MK        1.00*    NL        1.22     OV        1.00     
!   PT        1.03     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.148997Jy  sigma=0.000821
! Fit after  self-cal, rms=0.168004Jy  sigma=0.000763
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=25.69 mas, bpa=1.7 degrees
! Estimated noise=1306.56 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00124174 Jy
! Component: 100  -  total flux cleaned = -0.00139162 Jy
! Component: 150  -  total flux cleaned = -0.00126556 Jy
! Component: 200  -  total flux cleaned = -0.0011696 Jy
! Total flux subtracted in 200 components = -0.0011696 Jy
! Clean residual min=-0.006526 max=0.008740 Jy/beam
! Clean residual mean=0.000066 rms=0.001959 Jy/beam
! Combined flux in latest and established models = 0.448071 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 135 components and 0.448071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167747Jy  sigma=0.000760
! Fit after  self-cal, rms=0.169027Jy  sigma=0.000760
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169027Jy  sigma=0.000760
! Fit after  self-cal, rms=0.171451Jy  sigma=0.000756
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.522 mas, bmaj=25.88 mas, bpa=1.823 degrees
! Estimated noise=1301.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00169666 Jy
! Component: 100  -  total flux cleaned = -0.00191036 Jy
! Component: 150  -  total flux cleaned = -0.00217972 Jy
! Component: 200  -  total flux cleaned = -0.00233357 Jy
! Total flux subtracted in 200 components = -0.00233357 Jy
! Clean residual min=-0.004881 max=0.005437 Jy/beam
! Clean residual mean=0.000019 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.445738 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 147 components and 0.445738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171250Jy  sigma=0.000755
! Fit after  self-cal, rms=0.172156Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000704496 Jy
! Component: 100  -  total flux cleaned = -0.000776217 Jy
! Component: 150  -  total flux cleaned = -0.000908251 Jy
! Component: 200  -  total flux cleaned = -0.00102917 Jy
! Total flux subtracted in 200 components = -0.00102917 Jy
! Clean residual min=-0.004873 max=0.005596 Jy/beam
! Clean residual mean=0.000021 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.444708 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 153 components and 0.444709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172036Jy  sigma=0.000755
! Fit after  self-cal, rms=0.172283Jy  sigma=0.000755
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172283Jy  sigma=0.000755
! Fit after  self-cal, rms=0.175999Jy  sigma=0.000755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.506 mas, bmaj=26.08 mas, bpa=1.942 degrees
! Estimated noise=1302.14 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168723 Jy
! Component: 100  -  total flux cleaned = -0.0017854 Jy
! Component: 150  -  total flux cleaned = -0.001933 Jy
! Component: 200  -  total flux cleaned = -0.0020591 Jy
! Total flux subtracted in 200 components = -0.0020591 Jy
! Clean residual min=-0.004932 max=0.005351 Jy/beam
! Clean residual mean=0.000020 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 0.442649 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 157 components and 0.442649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175844Jy  sigma=0.000754
! Fit after  self-cal, rms=0.176402Jy  sigma=0.000754
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000566265 Jy
! Component: 100  -  total flux cleaned = -0.000686635 Jy
! Component: 150  -  total flux cleaned = -0.000797028 Jy
! Component: 200  -  total flux cleaned = -0.000897257 Jy
! Total flux subtracted in 200 components = -0.000897257 Jy
! Clean residual min=-0.004910 max=0.005457 Jy/beam
! Clean residual mean=0.000021 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.441752 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 165 components and 0.441752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176319Jy  sigma=0.000754
! Fit after  self-cal, rms=0.176464Jy  sigma=0.000754
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176464Jy  sigma=0.000754
! Fit after  self-cal, rms=0.180724Jy  sigma=0.000754
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.861 mas, bmaj=33.58 mas, bpa=-1.459 degrees
! Estimated noise=1388.3 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000412119 Jy
! Component: 100  -  total flux cleaned = -0.000653883 Jy
! Component: 150  -  total flux cleaned = -0.000799015 Jy
! Component: 200  -  total flux cleaned = -0.000992754 Jy
! Total flux subtracted in 200 components = -0.000992754 Jy
! Clean residual min=-0.005074 max=0.005965 Jy/beam
! Clean residual mean=0.000027 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.440759 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 168 components and 0.440759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180590Jy  sigma=0.000754
! Fit after  self-cal, rms=0.180989Jy  sigma=0.000753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.95539e-05 Jy
! Component: 100  -  total flux cleaned = -0.000253398 Jy
! Component: 150  -  total flux cleaned = -0.000313955 Jy
! Component: 200  -  total flux cleaned = -0.000372478 Jy
! Total flux subtracted in 200 components = -0.000372478 Jy
! Clean residual min=-0.005053 max=0.005912 Jy/beam
! Clean residual mean=0.000028 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.440387 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 171 components and 0.440387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180914Jy  sigma=0.000754
! Fit after  self-cal, rms=0.180971Jy  sigma=0.000754
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=26.28 mas, bpa=2.068 degrees
! Estimated noise=1301.87 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.491 x 26.28 at 2.068 degrees (North through East)
! Clean map  min=-0.0048576  max=0.27928 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=21.61 mas, bpa=2.368 degrees
! Estimated noise=2123.55 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20355 Jy
! Component: 100  -  total flux cleaned = 0.29554 Jy
! Component: 150  -  total flux cleaned = 0.349062 Jy
! Component: 200  -  total flux cleaned = 0.381646 Jy
! Total flux subtracted in 200 components = 0.381646 Jy
! Clean residual min=-0.009315 max=0.018192 Jy/beam
! Clean residual mean=-0.000050 rms=0.003489 Jy/beam
! Combined flux in latest and established models = 0.381646 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 58 model components to the UV plane model.
! The established model now contains 58 components and 0.381646 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=26.28 mas, bpa=2.068 degrees
! Estimated noise=1301.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305276 Jy
! Component: 100  -  total flux cleaned = 0.0445357 Jy
! Component: 150  -  total flux cleaned = 0.051709 Jy
! Component: 200  -  total flux cleaned = 0.0561462 Jy
! Total flux subtracted in 200 components = 0.0561462 Jy
! Clean residual min=-0.004724 max=0.005135 Jy/beam
! Clean residual mean=0.000023 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.437792 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 122 components and 0.437792 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.861 mas, bmaj=33.58 mas, bpa=-1.459 degrees
! Estimated noise=1388.3 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270558 Jy
! Component: 100  -  total flux cleaned = 0.00280214 Jy
! Component: 150  -  total flux cleaned = 0.002892 Jy
! Component: 200  -  total flux cleaned = 0.00297511 Jy
! Total flux subtracted in 200 components = 0.00297511 Jy
! Clean residual min=-0.004861 max=0.005470 Jy/beam
! Clean residual mean=0.000032 rms=0.001478 Jy/beam
! Combined flux in latest and established models = 0.440767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.80772e-05 Jy
! Component: 100  -  total flux cleaned = 0.000146865 Jy
! Component: 150  -  total flux cleaned = 0.000214233 Jy
! Component: 200  -  total flux cleaned = 0.00021369 Jy
! Total flux subtracted in 200 components = 0.00021369 Jy
! Clean residual min=-0.004903 max=0.005298 Jy/beam
! Clean residual mean=0.000033 rms=0.001444 Jy/beam
! Combined flux in latest and established models = 0.440981 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 0.440981 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=26.28 mas, bpa=2.068 degrees
! Estimated noise=1301.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390782 Jy
! Component: 100  -  total flux cleaned = 0.000319397 Jy
! Component: 150  -  total flux cleaned = 0.000250836 Jy
! Component: 200  -  total flux cleaned = 0.000183859 Jy
! Total flux subtracted in 200 components = 0.000183859 Jy
! Clean residual min=-0.004188 max=0.005046 Jy/beam
! Clean residual mean=0.000027 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.441164 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 0.441164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180419Jy  sigma=0.000752
! Fit after  self-cal, rms=0.180921Jy  sigma=0.000752
wmodel J0958-4110_S_2014_08_05_pus_map.mod
! Writing 165 model components to file: J0958-4110_S_2014_08_05_pus_map.mod
wobs J0958-4110_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0958-4110_S_2014_08_05_pus_uvs.fits
wwins J0958-4110_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J0958-4110_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011042 Jy
! Component: 100  -  total flux cleaned = 0.00147276 Jy
! Component: 150  -  total flux cleaned = 0.00188855 Jy
! Component: 200  -  total flux cleaned = 0.00188879 Jy
! Component: 250  -  total flux cleaned = 0.00182575 Jy
! Component: 300  -  total flux cleaned = 0.00176377 Jy
! Component: 350  -  total flux cleaned = 0.00158997 Jy
! Component: 400  -  total flux cleaned = 0.00153566 Jy
! Component: 450  -  total flux cleaned = 0.00148141 Jy
! Component: 500  -  total flux cleaned = 0.0015322 Jy
! Component: 550  -  total flux cleaned = 0.00153247 Jy
! Component: 600  -  total flux cleaned = 0.00153195 Jy
! Component: 650  -  total flux cleaned = 0.00153208 Jy
! Component: 700  -  total flux cleaned = 0.00157968 Jy
! Component: 750  -  total flux cleaned = 0.00158013 Jy
! Component: 800  -  total flux cleaned = 0.00166907 Jy
! Component: 850  -  total flux cleaned = 0.00171238 Jy
! Component: 900  -  total flux cleaned = 0.00171313 Jy
! Component: 950  -  total flux cleaned = 0.00175559 Jy
! Component: 1000  -  total flux cleaned = 0.00179664 Jy
! Component: 1050  -  total flux cleaned = 0.0017979 Jy
! Component: 1100  -  total flux cleaned = 0.00191495 Jy
! Component: 1150  -  total flux cleaned = 0.00202912 Jy
! Component: 1200  -  total flux cleaned = 0.00202947 Jy
! Component: 1250  -  total flux cleaned = 0.00210287 Jy
! Component: 1300  -  total flux cleaned = 0.00217408 Jy
! Component: 1350  -  total flux cleaned = 0.00220917 Jy
! Component: 1400  -  total flux cleaned = 0.00252053 Jy
! Component: 1450  -  total flux cleaned = 0.00272531 Jy
! Component: 1500  -  total flux cleaned = 0.00292687 Jy
! Component: 1550  -  total flux cleaned = 0.00309331 Jy
! Component: 1600  -  total flux cleaned = 0.00335566 Jy
! Component: 1650  -  total flux cleaned = 0.00364734 Jy
! Component: 1700  -  total flux cleaned = 0.0038388 Jy
! Component: 1750  -  total flux cleaned = 0.00399699 Jy
! Component: 1800  -  total flux cleaned = 0.00418478 Jy
! Component: 1850  -  total flux cleaned = 0.00440115 Jy
! Component: 1900  -  total flux cleaned = 0.0045537 Jy
! Component: 1950  -  total flux cleaned = 0.00476554 Jy
! Component: 2000  -  total flux cleaned = 0.00500488 Jy
! Component: 2050  -  total flux cleaned = 0.00515314 Jy
! Component: 2100  -  total flux cleaned = 0.00538817 Jy
! Component: 2150  -  total flux cleaned = 0.00562078 Jy
! Component: 2200  -  total flux cleaned = 0.00585165 Jy
! Component: 2250  -  total flux cleaned = 0.00588016 Jy
! Component: 2300  -  total flux cleaned = 0.00607945 Jy
! Component: 2350  -  total flux cleaned = 0.00616413 Jy
! Component: 2400  -  total flux cleaned = 0.0061642 Jy
! Component: 2450  -  total flux cleaned = 0.00622027 Jy
! Component: 2500  -  total flux cleaned = 0.00630368 Jy
! Component: 2550  -  total flux cleaned = 0.00638659 Jy
! Component: 2600  -  total flux cleaned = 0.00641391 Jy
! Component: 2650  -  total flux cleaned = 0.00638639 Jy
! Component: 2700  -  total flux cleaned = 0.00649521 Jy
! Component: 2750  -  total flux cleaned = 0.00646805 Jy
! Component: 2800  -  total flux cleaned = 0.00652205 Jy
! Component: 2850  -  total flux cleaned = 0.00652213 Jy
! Component: 2900  -  total flux cleaned = 0.00657544 Jy
! Component: 2950  -  total flux cleaned = 0.00660209 Jy
! Component: 3000  -  total flux cleaned = 0.00660192 Jy
! Component: 3050  -  total flux cleaned = 0.00668083 Jy
! Component: 3100  -  total flux cleaned = 0.00662826 Jy
! Component: 3150  -  total flux cleaned = 0.00665444 Jy
! Component: 3200  -  total flux cleaned = 0.00660234 Jy
! Component: 3250  -  total flux cleaned = 0.00662852 Jy
! Component: 3300  -  total flux cleaned = 0.00665434 Jy
! Component: 3350  -  total flux cleaned = 0.00662851 Jy
! Component: 3400  -  total flux cleaned = 0.00660281 Jy
! Component: 3450  -  total flux cleaned = 0.0066282 Jy
! Component: 3500  -  total flux cleaned = 0.00662836 Jy
! Component: 3550  -  total flux cleaned = 0.00667928 Jy
! Component: 3600  -  total flux cleaned = 0.00667939 Jy
! Component: 3650  -  total flux cleaned = 0.00670467 Jy
! Component: 3700  -  total flux cleaned = 0.0067804 Jy
! Component: 3750  -  total flux cleaned = 0.00675521 Jy
! Component: 3800  -  total flux cleaned = 0.00680556 Jy
! Component: 3850  -  total flux cleaned = 0.00685587 Jy
! Component: 3900  -  total flux cleaned = 0.00688111 Jy
! Component: 3950  -  total flux cleaned = 0.00685619 Jy
! Component: 4000  -  total flux cleaned = 0.00693154 Jy
! Component: 4050  -  total flux cleaned = 0.00703181 Jy
! Total flux subtracted in 4096 components = 0.0070818 Jy
! Clean residual min=-0.001651 max=0.001375 Jy/beam
! Clean residual mean=0.000035 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.448246 Jy
keep
! Adding 360 model components to the UV plane model.
! The established model now contains 525 components and 0.448246 Jy
![Exited script file: muppet]
wmap "J0958-4110_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.491 x 26.28 at 2.068 degrees (North through East)
! Clean map  min=-0.0037791  max=0.28389 Jy/beam
! Writing clean map to FITS file: J0958-4110_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.283894 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000507585 
device "J0958-4110_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0958-4110_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.536382 0.536382 1.07276 2.14553 4.29105 8.58211 17.1642 34.3284 68.6569
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.283 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.491 x 26.28 at 2.068 degrees (North through East)
! Clean map  min=-0.0037791  max=0.28389 Jy/beam
quit
! Quitting program
! Log file J0958-4110_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:23:36 2016