! Started logfile: J0954+7435_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:20:08 2017 obs J0954+7435_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0954+7435_S_2015_01_23_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975866 visibilities/baseline/integration-bin. ! Found source: J0954+7435 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0954+7435_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.761985Jy sigma=0.007018 ! Fit after self-cal, rms=0.686845Jy sigma=0.006273 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=6.425 mas, bpa=81.4 degrees ! Estimated noise=1003.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274234 Jy ! Component: 100 - total flux cleaned = 0.363186 Jy ! Total flux subtracted in 100 components = 0.363186 Jy ! Clean residual min=-0.049975 max=0.137344 Jy/beam ! Clean residual mean=0.000334 rms=0.014680 Jy/beam ! Combined flux in latest and established models = 0.363186 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.363186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344678Jy sigma=0.002902 ! Fit after self-cal, rms=0.344570Jy sigma=0.002901 ! Inverting map ! Added new window around map position (-19.5, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127036 Jy ! Component: 100 - total flux cleaned = 0.195834 Jy ! Total flux subtracted in 100 components = 0.195834 Jy ! Clean residual min=-0.035909 max=0.072566 Jy/beam ! Clean residual mean=0.000210 rms=0.009581 Jy/beam ! Combined flux in latest and established models = 0.55902 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.559021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275028Jy sigma=0.002041 ! Fit after self-cal, rms=0.266190Jy sigma=0.001933 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0653334 Jy ! Component: 100 - total flux cleaned = 0.1068 Jy ! Total flux subtracted in 100 components = 0.1068 Jy ! Clean residual min=-0.023681 max=0.038947 Jy/beam ! Clean residual mean=0.000148 rms=0.006381 Jy/beam ! Combined flux in latest and established models = 0.665821 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.665821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239354Jy sigma=0.001546 ! Fit after self-cal, rms=0.237688Jy sigma=0.001521 ! Inverting map ! Added new window around map position (-16.5, -12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442213 Jy ! Component: 100 - total flux cleaned = 0.0733957 Jy ! Total flux subtracted in 100 components = 0.0733957 Jy ! Clean residual min=-0.018365 max=0.029298 Jy/beam ! Clean residual mean=0.000102 rms=0.004722 Jy/beam ! Combined flux in latest and established models = 0.739216 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.739216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224608Jy sigma=0.001314 ! Fit after self-cal, rms=0.223974Jy sigma=0.001304 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.516 mas, bpa=82.48 degrees ! Estimated noise=634.482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047033 Jy ! Component: 100 - total flux cleaned = 0.0792433 Jy ! Component: 150 - total flux cleaned = 0.103268 Jy ! Component: 200 - total flux cleaned = 0.122146 Jy ! Total flux subtracted in 200 components = 0.122146 Jy ! Clean residual min=-0.013946 max=0.030692 Jy/beam ! Clean residual mean=-0.000007 rms=0.004978 Jy/beam ! Combined flux in latest and established models = 0.861363 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 122 components and 0.861363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213395Jy sigma=0.001099 ! Fit after self-cal, rms=0.213021Jy sigma=0.001094 ! Inverting map ! Added new window around map position (-14.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258965 Jy ! Component: 100 - total flux cleaned = 0.0419278 Jy ! Component: 150 - total flux cleaned = 0.0538512 Jy ! Component: 200 - total flux cleaned = 0.0631427 Jy ! Total flux subtracted in 200 components = 0.0631427 Jy ! Clean residual min=-0.010902 max=0.014282 Jy/beam ! Clean residual mean=-0.000030 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 0.924506 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 161 components and 0.924505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210442Jy sigma=0.001027 ! Fit after self-cal, rms=0.210253Jy sigma=0.001025 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.31 HN 0.95 KP 1.09 ! LA 0.98 MK 1.01 NL 1.01 OV 0.96 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.39 HN 1.01 KP 1.02 ! LA 0.95 MK 1.01 NL 1.00 OV 1.00 ! PT 1.00 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.77 HN 1.01 KP 0.88 ! LA 0.78 MK 1.02 NL 1.08 OV 0.93 ! PT 0.99 SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.44 HN 0.99 KP 0.83 ! LA 0.83 MK 1.00 NL 1.04 OV 0.96 ! PT 1.04 SC 1.06 ! ! ! Fit before self-cal, rms=0.210253Jy sigma=0.001025 ! Fit after self-cal, rms=0.266013Jy sigma=0.000836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.574 mas, bpa=82.32 degrees ! Estimated noise=638.783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143403 Jy ! Component: 100 - total flux cleaned = -0.00171499 Jy ! Component: 150 - total flux cleaned = -0.00183614 Jy ! Component: 200 - total flux cleaned = -0.00183804 Jy ! Total flux subtracted in 200 components = -0.00183804 Jy ! Clean residual min=-0.004883 max=0.006114 Jy/beam ! Clean residual mean=0.000007 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.922667 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 184 components and 0.922667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265846Jy sigma=0.000832 ! Fit after self-cal, rms=0.265999Jy sigma=0.000832 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265999Jy sigma=0.000832 ! Fit after self-cal, rms=0.270897Jy sigma=0.000820 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=7.594 mas, bpa=82.93 degrees ! Estimated noise=644.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108403 Jy ! Component: 100 - total flux cleaned = -0.000978775 Jy ! Component: 150 - total flux cleaned = -0.000706299 Jy ! Component: 200 - total flux cleaned = -0.000464273 Jy ! Total flux subtracted in 200 components = -0.000464273 Jy ! Clean residual min=-0.003567 max=0.003448 Jy/beam ! Clean residual mean=-0.000006 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.922203 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 194 components and 0.922203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270739Jy sigma=0.000818 ! Fit after self-cal, rms=0.270757Jy sigma=0.000818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160568 Jy ! Component: 100 - total flux cleaned = -9.09631e-05 Jy ! Component: 150 - total flux cleaned = 3.91837e-05 Jy ! Component: 200 - total flux cleaned = 0.000100469 Jy ! Total flux subtracted in 200 components = 0.000100469 Jy ! Clean residual min=-0.003360 max=0.003179 Jy/beam ! Clean residual mean=-0.000007 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.922303 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 203 components and 0.922303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270694Jy sigma=0.000817 ! Fit after self-cal, rms=0.270699Jy sigma=0.000817 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270699Jy sigma=0.000817 ! Fit after self-cal, rms=0.272383Jy sigma=0.000817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=7.615 mas, bpa=82.97 degrees ! Estimated noise=646.734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383395 Jy ! Component: 100 - total flux cleaned = 0.000537018 Jy ! Component: 150 - total flux cleaned = 0.000472611 Jy ! Component: 200 - total flux cleaned = 0.00041367 Jy ! Total flux subtracted in 200 components = 0.00041367 Jy ! Clean residual min=-0.003134 max=0.003135 Jy/beam ! Clean residual mean=-0.000005 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.922717 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 220 components and 0.922717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272292Jy sigma=0.000816 ! Fit after self-cal, rms=0.272301Jy sigma=0.000816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.32635e-05 Jy ! Component: 100 - total flux cleaned = 3.05896e-05 Jy ! Component: 150 - total flux cleaned = 2.96947e-05 Jy ! Component: 200 - total flux cleaned = 2.97534e-05 Jy ! Total flux subtracted in 200 components = 2.97534e-05 Jy ! Clean residual min=-0.002988 max=0.002931 Jy/beam ! Clean residual mean=-0.000006 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.922747 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 225 components and 0.922747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272266Jy sigma=0.000816 ! Fit after self-cal, rms=0.272268Jy sigma=0.000816 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272268Jy sigma=0.000816 ! Fit after self-cal, rms=0.273459Jy sigma=0.000816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.276 mas, bmaj=12.05 mas, bpa=80.19 degrees ! Estimated noise=850.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160355 Jy ! Component: 100 - total flux cleaned = 0.00200935 Jy ! Component: 150 - total flux cleaned = 0.00231251 Jy ! Component: 200 - total flux cleaned = 0.0023796 Jy ! Total flux subtracted in 200 components = 0.0023796 Jy ! Clean residual min=-0.003575 max=0.003146 Jy/beam ! Clean residual mean=-0.000007 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.925127 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 232 components and 0.925127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273402Jy sigma=0.000816 ! Fit after self-cal, rms=0.273403Jy sigma=0.000816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6086e-05 Jy ! Component: 100 - total flux cleaned = 7.61967e-05 Jy ! Component: 150 - total flux cleaned = 7.54046e-05 Jy ! Component: 200 - total flux cleaned = 7.56014e-05 Jy ! Total flux subtracted in 200 components = 7.56014e-05 Jy ! Clean residual min=-0.003561 max=0.003243 Jy/beam ! Clean residual mean=-0.000007 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.925202 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 234 components and 0.925202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273394Jy sigma=0.000816 ! Fit after self-cal, rms=0.273392Jy sigma=0.000816 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.631 mas, bpa=82.99 degrees ! Estimated noise=649.126 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 7.631 at 82.99 degrees (North through East) ! Clean map min=-0.0029212 max=0.35796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=6.501 mas, bpa=81.98 degrees ! Estimated noise=1036.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.305889 Jy ! Component: 100 - total flux cleaned = 0.446074 Jy ! Component: 150 - total flux cleaned = 0.533238 Jy ! Component: 200 - total flux cleaned = 0.596321 Jy ! Total flux subtracted in 200 components = 0.596321 Jy ! Clean residual min=-0.018713 max=0.036180 Jy/beam ! Clean residual mean=0.000117 rms=0.006203 Jy/beam ! Combined flux in latest and established models = 0.596321 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.596321 Jy ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.631 mas, bpa=82.99 degrees ! Estimated noise=649.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820536 Jy ! Component: 100 - total flux cleaned = 0.138946 Jy ! Component: 150 - total flux cleaned = 0.180429 Jy ! Component: 200 - total flux cleaned = 0.211437 Jy ! Total flux subtracted in 200 components = 0.211437 Jy ! Clean residual min=-0.008247 max=0.018057 Jy/beam ! Clean residual mean=-0.000005 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 0.807758 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 101 components and 0.807758 Jy ! Inverting map ! Added new window around map position (-1.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023766 Jy ! Component: 100 - total flux cleaned = 0.0423 Jy ! Component: 150 - total flux cleaned = 0.0569893 Jy ! Component: 200 - total flux cleaned = 0.068714 Jy ! Total flux subtracted in 200 components = 0.068714 Jy ! Clean residual min=-0.004427 max=0.008280 Jy/beam ! Clean residual mean=-0.000005 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.876472 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 166 components and 0.876472 Jy ! Inverting map ! Added new window around map position (-1.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967852 Jy ! Component: 100 - total flux cleaned = 0.0173627 Jy ! Component: 150 - total flux cleaned = 0.0236179 Jy ! Component: 200 - total flux cleaned = 0.0287423 Jy ! Total flux subtracted in 200 components = 0.0287423 Jy ! Clean residual min=-0.003423 max=0.003831 Jy/beam ! Clean residual mean=-0.000003 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.905214 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 208 components and 0.905214 Jy ! Inverting map ! Added new window around map position (-17.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444195 Jy ! Component: 100 - total flux cleaned = 0.00809115 Jy ! Component: 150 - total flux cleaned = 0.0111675 Jy ! Component: 200 - total flux cleaned = 0.0130701 Jy ! Total flux subtracted in 200 components = 0.0130701 Jy ! Clean residual min=-0.003084 max=0.002699 Jy/beam ! Clean residual mean=-0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.918284 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 239 components and 0.918284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.276 mas, bmaj=12.05 mas, bpa=80.19 degrees ! Estimated noise=850.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383225 Jy ! Component: 100 - total flux cleaned = 0.00577359 Jy ! Component: 150 - total flux cleaned = 0.00679139 Jy ! Component: 200 - total flux cleaned = 0.00749535 Jy ! Total flux subtracted in 200 components = 0.00749535 Jy ! Clean residual min=-0.003433 max=0.003201 Jy/beam ! Clean residual mean=-0.000002 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.92578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005393 Jy ! Component: 100 - total flux cleaned = 0.000852036 Jy ! Component: 150 - total flux cleaned = 0.00117919 Jy ! Component: 200 - total flux cleaned = 0.00143075 Jy ! Total flux subtracted in 200 components = 0.00143075 Jy ! Clean residual min=-0.003413 max=0.003215 Jy/beam ! Clean residual mean=-0.000002 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.927211 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 331 components and 0.927211 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.631 mas, bpa=82.99 degrees ! Estimated noise=649.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463356 Jy ! Component: 100 - total flux cleaned = 0.000517306 Jy ! Component: 150 - total flux cleaned = 0.000378781 Jy ! Component: 200 - total flux cleaned = 0.000293458 Jy ! Total flux subtracted in 200 components = 0.000293458 Jy ! Clean residual min=-0.002745 max=0.002379 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.927504 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 352 components and 0.927504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273002Jy sigma=0.000813 ! Fit after self-cal, rms=0.272952Jy sigma=0.000813 wmodel J0954+7435_S_2015_01_23_pus_map.mod ! Writing 352 model components to file: J0954+7435_S_2015_01_23_pus_map.mod wobs J0954+7435_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0954+7435_S_2015_01_23_pus_uvs.fits wwins J0954+7435_S_2015_01_23_pus_map.win ! wwins: Wrote 7 windows to J0954+7435_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000624948 Jy ! Component: 100 - total flux cleaned = -0.000624379 Jy ! Component: 150 - total flux cleaned = -0.000624441 Jy ! Component: 200 - total flux cleaned = -0.000623752 Jy ! Component: 250 - total flux cleaned = -0.000732093 Jy ! Component: 300 - total flux cleaned = -0.000908837 Jy ! Component: 350 - total flux cleaned = -0.00108182 Jy ! Component: 400 - total flux cleaned = -0.00125205 Jy ! Component: 450 - total flux cleaned = -0.00141918 Jy ! Component: 500 - total flux cleaned = -0.00161636 Jy ! Component: 550 - total flux cleaned = -0.00177827 Jy ! Component: 600 - total flux cleaned = -0.00193728 Jy ! Component: 650 - total flux cleaned = -0.00203115 Jy ! Component: 700 - total flux cleaned = -0.00215447 Jy ! Component: 750 - total flux cleaned = -0.00224598 Jy ! Component: 800 - total flux cleaned = -0.00242611 Jy ! Component: 850 - total flux cleaned = -0.0026033 Jy ! Component: 900 - total flux cleaned = -0.00260325 Jy ! Component: 950 - total flux cleaned = -0.00269025 Jy ! Component: 1000 - total flux cleaned = -0.00277593 Jy ! Component: 1050 - total flux cleaned = -0.00269131 Jy ! Component: 1100 - total flux cleaned = -0.00283173 Jy ! Component: 1150 - total flux cleaned = -0.00280366 Jy ! Component: 1200 - total flux cleaned = -0.0028862 Jy ! Component: 1250 - total flux cleaned = -0.00283141 Jy ! Component: 1300 - total flux cleaned = -0.00275086 Jy ! Component: 1350 - total flux cleaned = -0.0028308 Jy ! Component: 1400 - total flux cleaned = -0.00285698 Jy ! Component: 1450 - total flux cleaned = -0.00285675 Jy ! Component: 1500 - total flux cleaned = -0.00277883 Jy ! Component: 1550 - total flux cleaned = -0.00283038 Jy ! Component: 1600 - total flux cleaned = -0.00272801 Jy ! Component: 1650 - total flux cleaned = -0.00277895 Jy ! Component: 1700 - total flux cleaned = -0.00277876 Jy ! Component: 1750 - total flux cleaned = -0.00267857 Jy ! Component: 1800 - total flux cleaned = -0.00270332 Jy ! Component: 1850 - total flux cleaned = -0.00267871 Jy ! Component: 1900 - total flux cleaned = -0.00267874 Jy ! Component: 1950 - total flux cleaned = -0.0027026 Jy ! Component: 2000 - total flux cleaned = -0.00263027 Jy ! Component: 2050 - total flux cleaned = -0.00255879 Jy ! Component: 2100 - total flux cleaned = -0.00265367 Jy ! Component: 2150 - total flux cleaned = -0.00255948 Jy ! Component: 2200 - total flux cleaned = -0.0025592 Jy ! Component: 2250 - total flux cleaned = -0.00258239 Jy ! Component: 2300 - total flux cleaned = -0.00258238 Jy ! Component: 2350 - total flux cleaned = -0.00262835 Jy ! Component: 2400 - total flux cleaned = -0.00260558 Jy ! Component: 2450 - total flux cleaned = -0.00258309 Jy ! Component: 2500 - total flux cleaned = -0.00253829 Jy ! Component: 2550 - total flux cleaned = -0.00258295 Jy ! Component: 2600 - total flux cleaned = -0.00256093 Jy ! Component: 2650 - total flux cleaned = -0.00247291 Jy ! Component: 2700 - total flux cleaned = -0.00260413 Jy ! Component: 2750 - total flux cleaned = -0.00256038 Jy ! Component: 2800 - total flux cleaned = -0.00260359 Jy ! Component: 2850 - total flux cleaned = -0.00262508 Jy ! Component: 2900 - total flux cleaned = -0.00262532 Jy ! Component: 2950 - total flux cleaned = -0.00264643 Jy ! Component: 3000 - total flux cleaned = -0.00268866 Jy ! Component: 3050 - total flux cleaned = -0.00266755 Jy ! Component: 3100 - total flux cleaned = -0.00264688 Jy ! Component: 3150 - total flux cleaned = -0.00270907 Jy ! Component: 3200 - total flux cleaned = -0.00268845 Jy ! Component: 3250 - total flux cleaned = -0.00268851 Jy ! Component: 3300 - total flux cleaned = -0.00274974 Jy ! Component: 3350 - total flux cleaned = -0.00270909 Jy ! Component: 3400 - total flux cleaned = -0.00272937 Jy ! Component: 3450 - total flux cleaned = -0.00278957 Jy ! Component: 3500 - total flux cleaned = -0.00278938 Jy ! Component: 3550 - total flux cleaned = -0.00272992 Jy ! Component: 3600 - total flux cleaned = -0.00273001 Jy ! Component: 3650 - total flux cleaned = -0.00276952 Jy ! Component: 3700 - total flux cleaned = -0.00273059 Jy ! Component: 3750 - total flux cleaned = -0.00276963 Jy ! Component: 3800 - total flux cleaned = -0.00282776 Jy ! Component: 3850 - total flux cleaned = -0.00275056 Jy ! Component: 3900 - total flux cleaned = -0.00269294 Jy ! Component: 3950 - total flux cleaned = -0.00269304 Jy ! Component: 4000 - total flux cleaned = -0.00269307 Jy ! Component: 4050 - total flux cleaned = -0.00261742 Jy ! Total flux subtracted in 4096 components = -0.00259856 Jy ! Clean residual min=-0.001271 max=0.001018 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.924906 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 646 components and 0.924905 Jy ![Exited script file: muppet] wmap "J0954+7435_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 7.631 at 82.99 degrees (North through East) ! Clean map min=-0.0022428 max=0.36364 Jy/beam ! Writing clean map to FITS file: J0954+7435_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.363642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000363377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299781 0.299781 0.599562 1.19912 2.39825 4.7965 9.59299 19.186 38.372 76.7439 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.363 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 7.631 at 82.99 degrees (North through East) ! Clean map min=-0.0022428 max=0.36364 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0954+7435_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:20:14 2017