! Started logfile: J0946+5020_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:19:53 2017 obs J0946+5020_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0946+5020_S_2015_01_23_pus_uva.fits ! AN table 1: 119 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.714659 visibilities/baseline/integration-bin. ! Found source: J0946+5020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 15308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0946+5020_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985329Jy sigma=0.010682 ! Fit after self-cal, rms=0.948189Jy sigma=0.010478 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=4.077 mas, bpa=-21.51 degrees ! Estimated noise=956.077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418943 Jy ! Component: 100 - total flux cleaned = 0.0517261 Jy ! Total flux subtracted in 100 components = 0.0517261 Jy ! Clean residual min=-0.004805 max=0.003842 Jy/beam ! Clean residual mean=-0.000003 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.0517261 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0517261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179344Jy sigma=0.000777 ! Fit after self-cal, rms=0.179271Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=4.825 mas, bpa=-20.1 degrees ! Estimated noise=563.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00634371 Jy ! Component: 100 - total flux cleaned = 0.00950684 Jy ! Component: 150 - total flux cleaned = 0.0113335 Jy ! Component: 200 - total flux cleaned = 0.0124675 Jy ! Total flux subtracted in 200 components = 0.0124675 Jy ! Clean residual min=-0.003239 max=0.002219 Jy/beam ! Clean residual mean=-0.000034 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0641936 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.0641936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178545Jy sigma=0.000774 ! Fit after self-cal, rms=0.178575Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.49 HN 0.97 KP 1.11 ! LA 1.03 MK 1.05 NL 1.07 OV 0.99 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.48 HN 1.11 KP 1.01 ! LA 1.02 MK 1.02 NL 1.00 OV 1.10 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.54 HN 1.11 KP 0.98 ! LA 0.86 MK 1.05 NL 1.22 OV 0.95 ! PT 1.08 SC 1.06 ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.51 HN 1.00 KP 0.83 ! LA 0.90 MK 1.00 NL 1.11 OV 0.96 ! PT 1.08 SC 0.99 ! ! ! Fit before self-cal, rms=0.178575Jy sigma=0.000774 ! Fit after self-cal, rms=0.105391Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=4.861 mas, bpa=-20.07 degrees ! Estimated noise=572.621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025748 Jy ! Component: 100 - total flux cleaned = 0.000348217 Jy ! Component: 150 - total flux cleaned = 0.00040693 Jy ! Component: 200 - total flux cleaned = 0.000462801 Jy ! Total flux subtracted in 200 components = 0.000462801 Jy ! Clean residual min=-0.001984 max=0.001819 Jy/beam ! Clean residual mean=-0.000031 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0646564 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.0646564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105386Jy sigma=0.000771 ! Fit after self-cal, rms=0.104936Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104936Jy sigma=0.000770 ! Fit after self-cal, rms=0.094815Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=4.896 mas, bpa=-20.43 degrees ! Estimated noise=569.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122162 Jy ! Component: 100 - total flux cleaned = -7.05948e-05 Jy ! Component: 150 - total flux cleaned = -6.16007e-05 Jy ! Component: 200 - total flux cleaned = -5.28597e-05 Jy ! Total flux subtracted in 200 components = -5.28597e-05 Jy ! Clean residual min=-0.001705 max=0.001663 Jy/beam ! Clean residual mean=-0.000027 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0646036 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0646036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094812Jy sigma=0.000769 ! Fit after self-cal, rms=0.094742Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27756e-05 Jy ! Component: 100 - total flux cleaned = 9.85283e-05 Jy ! Component: 150 - total flux cleaned = 0.000131085 Jy ! Component: 200 - total flux cleaned = 0.000138815 Jy ! Total flux subtracted in 200 components = 0.000138815 Jy ! Clean residual min=-0.001710 max=0.001620 Jy/beam ! Clean residual mean=-0.000027 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0647424 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0647424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094741Jy sigma=0.000769 ! Fit after self-cal, rms=0.094741Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094741Jy sigma=0.000769 ! Fit after self-cal, rms=0.094202Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=4.909 mas, bpa=-20.47 degrees ! Estimated noise=570.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.23797e-05 Jy ! Component: 100 - total flux cleaned = -7.50744e-05 Jy ! Component: 150 - total flux cleaned = -6.70098e-05 Jy ! Component: 200 - total flux cleaned = -5.97273e-05 Jy ! Total flux subtracted in 200 components = -5.97273e-05 Jy ! Clean residual min=-0.001707 max=0.001632 Jy/beam ! Clean residual mean=-0.000027 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0646827 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0646827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094201Jy sigma=0.000769 ! Fit after self-cal, rms=0.094193Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.00547e-06 Jy ! Component: 100 - total flux cleaned = 2.89432e-05 Jy ! Component: 150 - total flux cleaned = 2.87942e-05 Jy ! Component: 200 - total flux cleaned = 2.22171e-05 Jy ! Total flux subtracted in 200 components = 2.22171e-05 Jy ! Clean residual min=-0.001710 max=0.001616 Jy/beam ! Clean residual mean=-0.000027 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0647049 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.0647049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094192Jy sigma=0.000769 ! Fit after self-cal, rms=0.094192Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094192Jy sigma=0.000769 ! Fit after self-cal, rms=0.094142Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.449 mas, bmaj=8.653 mas, bpa=-35.65 degrees ! Estimated noise=718.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.75864e-05 Jy ! Component: 100 - total flux cleaned = 3.10695e-05 Jy ! Component: 150 - total flux cleaned = 2.33667e-05 Jy ! Component: 200 - total flux cleaned = 2.30379e-05 Jy ! Total flux subtracted in 200 components = 2.30379e-05 Jy ! Clean residual min=-0.002005 max=0.002320 Jy/beam ! Clean residual mean=-0.000059 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0647279 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.0647279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094142Jy sigma=0.000769 ! Fit after self-cal, rms=0.094141Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.23686e-06 Jy ! Component: 100 - total flux cleaned = 1.91676e-05 Jy ! Component: 150 - total flux cleaned = 2.19884e-05 Jy ! Component: 200 - total flux cleaned = 2.40118e-05 Jy ! Total flux subtracted in 200 components = 2.40118e-05 Jy ! Clean residual min=-0.002004 max=0.002322 Jy/beam ! Clean residual mean=-0.000059 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0647519 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.0647519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094141Jy sigma=0.000769 ! Fit after self-cal, rms=0.094139Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=4.916 mas, bpa=-20.49 degrees ! Estimated noise=570.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.822 x 4.916 at -20.49 degrees (North through East) ! Clean map min=-0.0016545 max=0.055499 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=4.152 mas, bpa=-21.49 degrees ! Estimated noise=986.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423959 Jy ! Component: 100 - total flux cleaned = 0.0524706 Jy ! Component: 150 - total flux cleaned = 0.0570121 Jy ! Component: 200 - total flux cleaned = 0.0597833 Jy ! Total flux subtracted in 200 components = 0.0597833 Jy ! Clean residual min=-0.003566 max=0.003311 Jy/beam ! Clean residual mean=-0.000006 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0597833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0597833 Jy ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=4.916 mas, bpa=-20.49 degrees ! Estimated noise=570.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256905 Jy ! Component: 100 - total flux cleaned = 0.00377864 Jy ! Component: 150 - total flux cleaned = 0.00440812 Jy ! Component: 200 - total flux cleaned = 0.0045138 Jy ! Total flux subtracted in 200 components = 0.0045138 Jy ! Clean residual min=-0.001784 max=0.001689 Jy/beam ! Clean residual mean=-0.000027 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0642971 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0642971 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.449 mas, bmaj=8.653 mas, bpa=-35.65 degrees ! Estimated noise=718.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344232 Jy ! Component: 100 - total flux cleaned = 0.000358832 Jy ! Component: 150 - total flux cleaned = 0.000370057 Jy ! Component: 200 - total flux cleaned = 0.00037872 Jy ! Total flux subtracted in 200 components = 0.00037872 Jy ! Clean residual min=-0.002022 max=0.002317 Jy/beam ! Clean residual mean=-0.000059 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0646758 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.35895e-07 Jy ! Component: 100 - total flux cleaned = -3.10875e-06 Jy ! Component: 150 - total flux cleaned = -3.06119e-06 Jy ! Component: 200 - total flux cleaned = -6.09668e-06 Jy ! Total flux subtracted in 200 components = -6.09668e-06 Jy ! Clean residual min=-0.002019 max=0.002318 Jy/beam ! Clean residual mean=-0.000059 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0646697 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.0646697 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=4.916 mas, bpa=-20.49 degrees ! Estimated noise=570.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.15474e-07 Jy ! Component: 100 - total flux cleaned = -8.34528e-05 Jy ! Component: 150 - total flux cleaned = -0.000118475 Jy ! Component: 200 - total flux cleaned = -0.000140361 Jy ! Total flux subtracted in 200 components = -0.000140361 Jy ! Clean residual min=-0.001732 max=0.001669 Jy/beam ! Clean residual mean=-0.000027 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0645294 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0645294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094144Jy sigma=0.000769 ! Fit after self-cal, rms=0.094139Jy sigma=0.000769 wmodel J0946+5020_S_2015_01_23_pus_map.mod ! Writing 39 model components to file: J0946+5020_S_2015_01_23_pus_map.mod wobs J0946+5020_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0946+5020_S_2015_01_23_pus_uvs.fits wwins J0946+5020_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0946+5020_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722077 Jy ! Component: 100 - total flux cleaned = -0.00124097 Jy ! Component: 150 - total flux cleaned = -0.0014445 Jy ! Component: 200 - total flux cleaned = -0.00158432 Jy ! Component: 250 - total flux cleaned = -0.00163819 Jy ! Component: 300 - total flux cleaned = -0.00166503 Jy ! Component: 350 - total flux cleaned = -0.00169014 Jy ! Component: 400 - total flux cleaned = -0.00168956 Jy ! Component: 450 - total flux cleaned = -0.00166558 Jy ! Component: 500 - total flux cleaned = -0.00171311 Jy ! Component: 550 - total flux cleaned = -0.00173614 Jy ! Component: 600 - total flux cleaned = -0.00173634 Jy ! Component: 650 - total flux cleaned = -0.0017585 Jy ! Component: 700 - total flux cleaned = -0.00173667 Jy ! Component: 750 - total flux cleaned = -0.00182309 Jy ! Component: 800 - total flux cleaned = -0.00186518 Jy ! Component: 850 - total flux cleaned = -0.00184429 Jy ! Component: 900 - total flux cleaned = -0.00192642 Jy ! Component: 950 - total flux cleaned = -0.00192644 Jy ! Component: 1000 - total flux cleaned = -0.00194658 Jy ! Component: 1050 - total flux cleaned = -0.00204385 Jy ! Component: 1100 - total flux cleaned = -0.00208222 Jy ! Component: 1150 - total flux cleaned = -0.00213931 Jy ! Component: 1200 - total flux cleaned = -0.00221448 Jy ! Component: 1250 - total flux cleaned = -0.00226962 Jy ! Component: 1300 - total flux cleaned = -0.00232441 Jy ! Component: 1350 - total flux cleaned = -0.00239572 Jy ! Component: 1400 - total flux cleaned = -0.00244844 Jy ! Component: 1450 - total flux cleaned = -0.00246592 Jy ! Component: 1500 - total flux cleaned = -0.00253439 Jy ! Component: 1550 - total flux cleaned = -0.00261918 Jy ! Component: 1600 - total flux cleaned = -0.00268643 Jy ! Component: 1650 - total flux cleaned = -0.00270303 Jy ! Component: 1700 - total flux cleaned = -0.00275231 Jy ! Component: 1750 - total flux cleaned = -0.00280109 Jy ! Component: 1800 - total flux cleaned = -0.00281707 Jy ! Component: 1850 - total flux cleaned = -0.00286446 Jy ! Component: 1900 - total flux cleaned = -0.0028485 Jy ! Component: 1950 - total flux cleaned = -0.00287949 Jy ! Component: 2000 - total flux cleaned = -0.00286415 Jy ! Component: 2050 - total flux cleaned = -0.00297061 Jy ! Component: 2100 - total flux cleaned = -0.00295542 Jy ! Component: 2150 - total flux cleaned = -0.00297035 Jy ! Component: 2200 - total flux cleaned = -0.0029852 Jy ! Component: 2250 - total flux cleaned = -0.00298524 Jy ! Component: 2300 - total flux cleaned = -0.00304352 Jy ! Component: 2350 - total flux cleaned = -0.00308673 Jy ! Component: 2400 - total flux cleaned = -0.00312938 Jy ! Component: 2450 - total flux cleaned = -0.00311515 Jy ! Component: 2500 - total flux cleaned = -0.00315716 Jy ! Component: 2550 - total flux cleaned = -0.0031709 Jy ! Component: 2600 - total flux cleaned = -0.00318462 Jy ! Component: 2650 - total flux cleaned = -0.00319824 Jy ! Component: 2700 - total flux cleaned = -0.00323885 Jy ! Component: 2750 - total flux cleaned = -0.00321192 Jy ! Component: 2800 - total flux cleaned = -0.00319863 Jy ! Component: 2850 - total flux cleaned = -0.0032517 Jy ! Component: 2900 - total flux cleaned = -0.0032385 Jy ! Component: 2950 - total flux cleaned = -0.00326467 Jy ! Component: 3000 - total flux cleaned = -0.00329059 Jy ! Component: 3050 - total flux cleaned = -0.00332891 Jy ! Component: 3100 - total flux cleaned = -0.00331612 Jy ! Component: 3150 - total flux cleaned = -0.00332874 Jy ! Component: 3200 - total flux cleaned = -0.00336629 Jy ! Component: 3250 - total flux cleaned = -0.00332896 Jy ! Component: 3300 - total flux cleaned = -0.00335368 Jy ! Component: 3350 - total flux cleaned = -0.00334143 Jy ! Component: 3400 - total flux cleaned = -0.00340254 Jy ! Component: 3450 - total flux cleaned = -0.00343877 Jy ! Component: 3500 - total flux cleaned = -0.00347485 Jy ! Component: 3550 - total flux cleaned = -0.00349877 Jy ! Component: 3600 - total flux cleaned = -0.0034987 Jy ! Component: 3650 - total flux cleaned = -0.00353404 Jy ! Component: 3700 - total flux cleaned = -0.00358087 Jy ! Component: 3750 - total flux cleaned = -0.00359253 Jy ! Component: 3800 - total flux cleaned = -0.00358092 Jy ! Component: 3850 - total flux cleaned = -0.00367307 Jy ! Component: 3900 - total flux cleaned = -0.00362724 Jy ! Component: 3950 - total flux cleaned = -0.00366137 Jy ! Component: 4000 - total flux cleaned = -0.0036613 Jy ! Component: 4050 - total flux cleaned = -0.00370635 Jy ! Total flux subtracted in 4096 components = -0.00369513 Jy ! Clean residual min=-0.000652 max=0.000700 Jy/beam ! Clean residual mean=-0.000009 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0608342 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 356 components and 0.0608342 Jy ![Exited script file: muppet] wmap "J0946+5020_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.822 x 4.916 at -20.49 degrees (North through East) ! Clean map min=-0.001258 max=0.055629 Jy/beam ! Writing clean map to FITS file: J0946+5020_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0556287 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06672 1.06672 2.13344 4.26688 8.53376 17.0675 34.135 68.2701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.822 x 4.916 at -20.49 degrees (North through East) ! Clean map min=-0.001258 max=0.055629 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0946+5020_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:58 2017