! Started logfile: J0943+6150_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:44 2017 obs J0943+6150_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0943+6150_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0943+6150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0943+6150_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978746Jy sigma=0.014642 ! Fit after self-cal, rms=0.945241Jy sigma=0.014136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=5.87 mas, bpa=47.64 degrees ! Estimated noise=986.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0437236 Jy ! Component: 100 - total flux cleaned = 0.0533599 Jy ! Total flux subtracted in 100 components = 0.0533599 Jy ! Clean residual min=-0.003387 max=0.003981 Jy/beam ! Clean residual mean=-0.000004 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0533599 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0533599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068410Jy sigma=0.000890 ! Fit after self-cal, rms=0.068011Jy sigma=0.000884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.01 mas, bpa=49.33 degrees ! Estimated noise=541.124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449716 Jy ! Component: 100 - total flux cleaned = 0.00666948 Jy ! Component: 150 - total flux cleaned = 0.00789942 Jy ! Component: 200 - total flux cleaned = 0.008474 Jy ! Total flux subtracted in 200 components = 0.008474 Jy ! Clean residual min=-0.002336 max=0.002109 Jy/beam ! Clean residual mean=-0.000004 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0618339 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0618339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067734Jy sigma=0.000880 ! Fit after self-cal, rms=0.067823Jy sigma=0.000880 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.05 ! MK 1.00 NL 1.02 OV 1.04 PT 1.07 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 1.00 ! MK 1.01 NL 1.03 OV 1.06 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* KP 1.00* LA 0.83 ! MK 1.02 NL 0.98 OV 0.96 PT 0.94 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.97 ! MK 1.00 NL 1.10 OV 1.08 PT 1.09 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.067823Jy sigma=0.000880 ! Fit after self-cal, rms=0.066994Jy sigma=0.000875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.029 mas, bpa=49.04 degrees ! Estimated noise=537.607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269607 Jy ! Component: 100 - total flux cleaned = 0.000209285 Jy ! Component: 150 - total flux cleaned = 0.000179912 Jy ! Component: 200 - total flux cleaned = 0.000205138 Jy ! Total flux subtracted in 200 components = 0.000205138 Jy ! Clean residual min=-0.002028 max=0.001975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.062039 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.062039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066982Jy sigma=0.000875 ! Fit after self-cal, rms=0.067246Jy sigma=0.000875 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067246Jy sigma=0.000875 ! Fit after self-cal, rms=0.067686Jy sigma=0.000873 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=7.023 mas, bpa=48.94 degrees ! Estimated noise=538.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285608 Jy ! Component: 100 - total flux cleaned = 0.0002854 Jy ! Component: 150 - total flux cleaned = 0.000259817 Jy ! Component: 200 - total flux cleaned = 0.00022315 Jy ! Total flux subtracted in 200 components = 0.00022315 Jy ! Clean residual min=-0.001841 max=0.001813 Jy/beam ! Clean residual mean=0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0622622 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0622622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067677Jy sigma=0.000873 ! Fit after self-cal, rms=0.067818Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.27577e-05 Jy ! Component: 100 - total flux cleaned = -5.94701e-05 Jy ! Component: 150 - total flux cleaned = -9.42799e-05 Jy ! Component: 200 - total flux cleaned = -0.000127227 Jy ! Total flux subtracted in 200 components = -0.000127227 Jy ! Clean residual min=-0.001878 max=0.001775 Jy/beam ! Clean residual mean=0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0621349 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0621349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067813Jy sigma=0.000873 ! Fit after self-cal, rms=0.067824Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067824Jy sigma=0.000873 ! Fit after self-cal, rms=0.067911Jy sigma=0.000873 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.017 mas, bpa=48.77 degrees ! Estimated noise=538.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255253 Jy ! Component: 100 - total flux cleaned = 0.000279715 Jy ! Component: 150 - total flux cleaned = 0.00026855 Jy ! Component: 200 - total flux cleaned = 0.000247884 Jy ! Total flux subtracted in 200 components = 0.000247884 Jy ! Clean residual min=-0.001831 max=0.001808 Jy/beam ! Clean residual mean=0.000003 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0623828 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0623828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067905Jy sigma=0.000873 ! Fit after self-cal, rms=0.067964Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -67.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140352 Jy ! Component: 100 - total flux cleaned = 0.00177321 Jy ! Component: 150 - total flux cleaned = 0.00211874 Jy ! Component: 200 - total flux cleaned = 0.0023109 Jy ! Total flux subtracted in 200 components = 0.0023109 Jy ! Clean residual min=-0.001551 max=0.001528 Jy/beam ! Clean residual mean=0.000004 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0646937 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0646937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067925Jy sigma=0.000872 ! Fit after self-cal, rms=0.067902Jy sigma=0.000872 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067902Jy sigma=0.000872 ! Fit after self-cal, rms=0.067768Jy sigma=0.000872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.483 mas, bmaj=11.4 mas, bpa=51.46 degrees ! Estimated noise=646.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793891 Jy ! Component: 100 - total flux cleaned = 0.00111354 Jy ! Component: 150 - total flux cleaned = 0.00131483 Jy ! Component: 200 - total flux cleaned = 0.00142581 Jy ! Total flux subtracted in 200 components = 0.00142581 Jy ! Clean residual min=-0.001554 max=0.001717 Jy/beam ! Clean residual mean=0.000010 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0661195 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.0661195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067762Jy sigma=0.000872 ! Fit after self-cal, rms=0.067783Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326809 Jy ! Component: 100 - total flux cleaned = 0.000338843 Jy ! Component: 150 - total flux cleaned = 0.0003482 Jy ! Component: 200 - total flux cleaned = 0.000366181 Jy ! Total flux subtracted in 200 components = 0.000366181 Jy ! Clean residual min=-0.001605 max=0.001736 Jy/beam ! Clean residual mean=0.000010 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0664857 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 0.0664857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067782Jy sigma=0.000872 ! Fit after self-cal, rms=0.067784Jy sigma=0.000872 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.017 mas, bpa=48.64 degrees ! Estimated noise=536.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.017 at 48.64 degrees (North through East) ! Clean map min=-0.0014667 max=0.056887 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=5.88 mas, bpa=47.08 degrees ! Estimated noise=975.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04317 Jy ! Component: 100 - total flux cleaned = 0.0531551 Jy ! Component: 150 - total flux cleaned = 0.0565245 Jy ! Component: 200 - total flux cleaned = 0.0586346 Jy ! Total flux subtracted in 200 components = 0.0586346 Jy ! Clean residual min=-0.002915 max=0.003154 Jy/beam ! Clean residual mean=0.000003 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0586346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0586346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.017 mas, bpa=48.64 degrees ! Estimated noise=536.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264257 Jy ! Component: 100 - total flux cleaned = 0.00435668 Jy ! Component: 150 - total flux cleaned = 0.00565002 Jy ! Component: 200 - total flux cleaned = 0.00666446 Jy ! Total flux subtracted in 200 components = 0.00666446 Jy ! Clean residual min=-0.001699 max=0.001694 Jy/beam ! Clean residual mean=0.000005 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.065299 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.065299 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.483 mas, bmaj=11.4 mas, bpa=51.46 degrees ! Estimated noise=646.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107682 Jy ! Component: 100 - total flux cleaned = 0.00165476 Jy ! Component: 150 - total flux cleaned = 0.00178525 Jy ! Component: 200 - total flux cleaned = 0.00187486 Jy ! Total flux subtracted in 200 components = 0.00187486 Jy ! Clean residual min=-0.001638 max=0.001792 Jy/beam ! Clean residual mean=0.000012 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0671739 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55805e-05 Jy ! Component: 100 - total flux cleaned = 5.84036e-05 Jy ! Component: 150 - total flux cleaned = 5.95673e-05 Jy ! Component: 200 - total flux cleaned = 5.0067e-05 Jy ! Total flux subtracted in 200 components = 5.0067e-05 Jy ! Clean residual min=-0.001645 max=0.001770 Jy/beam ! Clean residual mean=0.000011 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.067224 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 76 components and 0.067224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.017 mas, bpa=48.64 degrees ! Estimated noise=536.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.34587e-05 Jy ! Component: 100 - total flux cleaned = -7.81778e-05 Jy ! Component: 150 - total flux cleaned = -0.000115443 Jy ! Component: 200 - total flux cleaned = -0.000164175 Jy ! Total flux subtracted in 200 components = -0.000164175 Jy ! Clean residual min=-0.001543 max=0.001569 Jy/beam ! Clean residual mean=0.000005 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0670598 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.0670598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067790Jy sigma=0.000872 ! Fit after self-cal, rms=0.067756Jy sigma=0.000872 wmodel J0943+6150_S_2014_01_04_pus_map.mod ! Writing 83 model components to file: J0943+6150_S_2014_01_04_pus_map.mod wobs J0943+6150_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0943+6150_S_2014_01_04_pus_uvs.fits wwins J0943+6150_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0943+6150_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.76911e-05 Jy ! Component: 100 - total flux cleaned = 0.00018465 Jy ! Component: 150 - total flux cleaned = 0.000303164 Jy ! Component: 200 - total flux cleaned = 0.000501899 Jy ! Component: 250 - total flux cleaned = 0.000648669 Jy ! Component: 300 - total flux cleaned = 0.000769207 Jy ! Component: 350 - total flux cleaned = 0.000864924 Jy ! Component: 400 - total flux cleaned = 0.000993792 Jy ! Component: 450 - total flux cleaned = 0.00111787 Jy ! Component: 500 - total flux cleaned = 0.00122097 Jy ! Component: 550 - total flux cleaned = 0.00130455 Jy ! Component: 600 - total flux cleaned = 0.00141836 Jy ! Component: 650 - total flux cleaned = 0.00148195 Jy ! Component: 700 - total flux cleaned = 0.00152886 Jy ! Component: 750 - total flux cleaned = 0.00154417 Jy ! Component: 800 - total flux cleaned = 0.00158885 Jy ! Component: 850 - total flux cleaned = 0.00158892 Jy ! Component: 900 - total flux cleaned = 0.00157443 Jy ! Component: 950 - total flux cleaned = 0.00157422 Jy ! Component: 1000 - total flux cleaned = 0.0015186 Jy ! Component: 1050 - total flux cleaned = 0.00151882 Jy ! Component: 1100 - total flux cleaned = 0.00153216 Jy ! Component: 1150 - total flux cleaned = 0.00151875 Jy ! Component: 1200 - total flux cleaned = 0.00149299 Jy ! Component: 1250 - total flux cleaned = 0.0014804 Jy ! Component: 1300 - total flux cleaned = 0.0014932 Jy ! Component: 1350 - total flux cleaned = 0.00150557 Jy ! Component: 1400 - total flux cleaned = 0.00152977 Jy ! Component: 1450 - total flux cleaned = 0.0015537 Jy ! Component: 1500 - total flux cleaned = 0.00157737 Jy ! Component: 1550 - total flux cleaned = 0.00163535 Jy ! Component: 1600 - total flux cleaned = 0.00165829 Jy ! Component: 1650 - total flux cleaned = 0.00168106 Jy ! Component: 1700 - total flux cleaned = 0.00174831 Jy ! Component: 1750 - total flux cleaned = 0.00180355 Jy ! Component: 1800 - total flux cleaned = 0.00183628 Jy ! Component: 1850 - total flux cleaned = 0.00186861 Jy ! Component: 1900 - total flux cleaned = 0.00192187 Jy ! Component: 1950 - total flux cleaned = 0.00197463 Jy ! Component: 2000 - total flux cleaned = 0.0020371 Jy ! Component: 2050 - total flux cleaned = 0.00208862 Jy ! Component: 2100 - total flux cleaned = 0.00216006 Jy ! Component: 2150 - total flux cleaned = 0.00219038 Jy ! Component: 2200 - total flux cleaned = 0.00224045 Jy ! Component: 2250 - total flux cleaned = 0.00230965 Jy ! Component: 2300 - total flux cleaned = 0.00232935 Jy ! Component: 2350 - total flux cleaned = 0.00236829 Jy ! Component: 2400 - total flux cleaned = 0.00241645 Jy ! Component: 2450 - total flux cleaned = 0.00245464 Jy ! Component: 2500 - total flux cleaned = 0.00247358 Jy ! Component: 2550 - total flux cleaned = 0.00252053 Jy ! Component: 2600 - total flux cleaned = 0.00253909 Jy ! Component: 2650 - total flux cleaned = 0.00255759 Jy ! Component: 2700 - total flux cleaned = 0.00259427 Jy ! Component: 2750 - total flux cleaned = 0.00260341 Jy ! Component: 2800 - total flux cleaned = 0.00263049 Jy ! Component: 2850 - total flux cleaned = 0.0026484 Jy ! Component: 2900 - total flux cleaned = 0.00266622 Jy ! Component: 2950 - total flux cleaned = 0.00267505 Jy ! Component: 3000 - total flux cleaned = 0.00270147 Jy ! Component: 3050 - total flux cleaned = 0.00271031 Jy ! Component: 3100 - total flux cleaned = 0.00274508 Jy ! Component: 3150 - total flux cleaned = 0.00277962 Jy ! Component: 3200 - total flux cleaned = 0.0027797 Jy ! Component: 3250 - total flux cleaned = 0.00283092 Jy ! Component: 3300 - total flux cleaned = 0.00283942 Jy ! Component: 3350 - total flux cleaned = 0.00285638 Jy ! Component: 3400 - total flux cleaned = 0.00288154 Jy ! Component: 3450 - total flux cleaned = 0.00288988 Jy ! Component: 3500 - total flux cleaned = 0.00291477 Jy ! Component: 3550 - total flux cleaned = 0.00290655 Jy ! Component: 3600 - total flux cleaned = 0.00294768 Jy ! Component: 3650 - total flux cleaned = 0.00296403 Jy ! Component: 3700 - total flux cleaned = 0.00295589 Jy ! Component: 3750 - total flux cleaned = 0.00297218 Jy ! Component: 3800 - total flux cleaned = 0.00299643 Jy ! Component: 3850 - total flux cleaned = 0.00299637 Jy ! Component: 3900 - total flux cleaned = 0.00299635 Jy ! Component: 3950 - total flux cleaned = 0.00298834 Jy ! Component: 4000 - total flux cleaned = 0.0029963 Jy ! Component: 4050 - total flux cleaned = 0.00299626 Jy ! Total flux subtracted in 4096 components = 0.00298833 Jy ! Clean residual min=-0.000519 max=0.000395 Jy/beam ! Clean residual mean=0.000002 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0700481 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 311 components and 0.0700481 Jy ![Exited script file: muppet] wmap "J0943+6150_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.017 at 48.64 degrees (North through East) ! Clean map min=-0.0010492 max=0.056344 Jy/beam ! Writing clean map to FITS file: J0943+6150_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0563441 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126143 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.671642 0.671642 1.34328 2.68657 5.37314 10.7463 21.4926 42.9851 85.9702 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.017 at 48.64 degrees (North through East) ! Clean map min=-0.0010492 max=0.056344 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0943+6150_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:48 2017