! Started logfile: J0943+2028_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:55:12 2016 obs J0943+2028_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0943+2028_S_2015_03_17_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.711891 visibilities/baseline/integration-bin. ! Found source: J0943+2028 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 14608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0943+2028_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953587Jy sigma=0.011219 ! Fit after self-cal, rms=0.930891Jy sigma=0.010969 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.766 mas, bpa=17.03 degrees ! Estimated noise=799.287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05279 Jy ! Component: 100 - total flux cleaned = 0.0651402 Jy ! Total flux subtracted in 100 components = 0.0651402 Jy ! Clean residual min=-0.003677 max=0.004989 Jy/beam ! Clean residual mean=-0.000026 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0651402 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0651402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071328Jy sigma=0.000772 ! Fit after self-cal, rms=0.071314Jy sigma=0.000772 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=8.882 mas, bpa=15.89 degrees ! Estimated noise=506.675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00757161 Jy ! Component: 100 - total flux cleaned = 0.0114318 Jy ! Component: 150 - total flux cleaned = 0.0138393 Jy ! Component: 200 - total flux cleaned = 0.0153691 Jy ! Total flux subtracted in 200 components = 0.0153691 Jy ! Clean residual min=-0.002575 max=0.003150 Jy/beam ! Clean residual mean=-0.000021 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0805093 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 0.0805093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070371Jy sigma=0.000764 ! Fit after self-cal, rms=0.070358Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 0.96 KP 1.09 ! LA 0.94 MK 1.13 NL 0.88 OV 1.02 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 1.00 KP 1.06 ! LA 0.94 MK 1.16 NL 0.96 OV 1.09 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.88 HN 0.98 KP 0.98 ! LA 0.77 MK 1.22 NL 1.11 OV 1.00 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.08 KP 0.96 ! LA 0.82 MK 1.23 NL 1.00 OV 1.07 ! PT 1.06 SC 0.95 ! ! ! Fit before self-cal, rms=0.070358Jy sigma=0.000764 ! Fit after self-cal, rms=0.067974Jy sigma=0.000757 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=8.997 mas, bpa=16.57 degrees ! Estimated noise=506.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000782581 Jy ! Component: 100 - total flux cleaned = -0.000909542 Jy ! Component: 150 - total flux cleaned = -0.000986849 Jy ! Component: 200 - total flux cleaned = -0.00103458 Jy ! Total flux subtracted in 200 components = -0.00103458 Jy ! Clean residual min=-0.001834 max=0.002419 Jy/beam ! Clean residual mean=-0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0794747 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0794747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067957Jy sigma=0.000757 ! Fit after self-cal, rms=0.067900Jy sigma=0.000756 ! Inverting map ! Added new window around map position (6.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220659 Jy ! Component: 100 - total flux cleaned = 0.00259965 Jy ! Component: 150 - total flux cleaned = 0.00291045 Jy ! Component: 200 - total flux cleaned = 0.00305738 Jy ! Total flux subtracted in 200 components = 0.00305738 Jy ! Clean residual min=-0.001644 max=0.001515 Jy/beam ! Clean residual mean=-0.000005 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0825321 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 70 components and 0.0825321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067822Jy sigma=0.000755 ! Fit after self-cal, rms=0.067817Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067817Jy sigma=0.000755 ! Fit after self-cal, rms=0.067642Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.036 mas, bmaj=9.027 mas, bpa=16.6 degrees ! Estimated noise=504.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587597 Jy ! Component: 100 - total flux cleaned = 0.000752389 Jy ! Component: 150 - total flux cleaned = 0.000796388 Jy ! Component: 200 - total flux cleaned = 0.000778889 Jy ! Total flux subtracted in 200 components = 0.000778889 Jy ! Clean residual min=-0.001430 max=0.001260 Jy/beam ! Clean residual mean=-0.000004 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.083311 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.083311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067623Jy sigma=0.000754 ! Fit after self-cal, rms=0.067632Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249823 Jy ! Component: 100 - total flux cleaned = 0.000233402 Jy ! Component: 150 - total flux cleaned = 0.000202133 Jy ! Component: 200 - total flux cleaned = 0.000187846 Jy ! Total flux subtracted in 200 components = 0.000187846 Jy ! Clean residual min=-0.001351 max=0.001277 Jy/beam ! Clean residual mean=-0.000003 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0834988 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.0834988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067624Jy sigma=0.000754 ! Fit after self-cal, rms=0.067625Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067625Jy sigma=0.000754 ! Fit after self-cal, rms=0.067432Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.038 mas, bmaj=9.037 mas, bpa=16.65 degrees ! Estimated noise=503.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106186 Jy ! Component: 100 - total flux cleaned = 4.34183e-05 Jy ! Component: 150 - total flux cleaned = 4.29726e-05 Jy ! Component: 200 - total flux cleaned = 2.95127e-05 Jy ! Total flux subtracted in 200 components = 2.95127e-05 Jy ! Clean residual min=-0.001313 max=0.001232 Jy/beam ! Clean residual mean=-0.000004 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0835283 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.0835283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067425Jy sigma=0.000754 ! Fit after self-cal, rms=0.067426Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.68265e-05 Jy ! Component: 100 - total flux cleaned = 7.68909e-05 Jy ! Component: 150 - total flux cleaned = 0.000100348 Jy ! Component: 200 - total flux cleaned = 0.000111583 Jy ! Total flux subtracted in 200 components = 0.000111583 Jy ! Clean residual min=-0.001293 max=0.001241 Jy/beam ! Clean residual mean=-0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0836399 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.0836399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067422Jy sigma=0.000754 ! Fit after self-cal, rms=0.067422Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067422Jy sigma=0.000754 ! Fit after self-cal, rms=0.067338Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.504 mas, bmaj=12.01 mas, bpa=10.92 degrees ! Estimated noise=584.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.87991e-05 Jy ! Component: 100 - total flux cleaned = 0.00016032 Jy ! Component: 150 - total flux cleaned = 0.000229276 Jy ! Component: 200 - total flux cleaned = 0.000246747 Jy ! Total flux subtracted in 200 components = 0.000246747 Jy ! Clean residual min=-0.001220 max=0.001402 Jy/beam ! Clean residual mean=-0.000007 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0838866 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.0838866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067336Jy sigma=0.000754 ! Fit after self-cal, rms=0.067336Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.77612e-05 Jy ! Component: 100 - total flux cleaned = 9.32539e-05 Jy ! Component: 150 - total flux cleaned = 9.33495e-05 Jy ! Component: 200 - total flux cleaned = 8.6521e-05 Jy ! Total flux subtracted in 200 components = 8.6521e-05 Jy ! Clean residual min=-0.001204 max=0.001407 Jy/beam ! Clean residual mean=-0.000007 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0839732 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.0839732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067335Jy sigma=0.000754 ! Fit after self-cal, rms=0.067334Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.047 mas, bpa=16.69 degrees ! Estimated noise=502.268 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.047 at 16.69 degrees (North through East) ! Clean map min=-0.001246 max=0.068757 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.959 mas, bpa=17.86 degrees ! Estimated noise=805.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530458 Jy ! Component: 100 - total flux cleaned = 0.0652482 Jy ! Component: 150 - total flux cleaned = 0.070354 Jy ! Component: 200 - total flux cleaned = 0.0737223 Jy ! Total flux subtracted in 200 components = 0.0737223 Jy ! Clean residual min=-0.002422 max=0.002614 Jy/beam ! Clean residual mean=-0.000008 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0737223 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0737223 Jy ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.047 mas, bpa=16.69 degrees ! Estimated noise=502.268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347233 Jy ! Component: 100 - total flux cleaned = 0.00573801 Jy ! Component: 150 - total flux cleaned = 0.00730201 Jy ! Component: 200 - total flux cleaned = 0.00822026 Jy ! Total flux subtracted in 200 components = 0.00822026 Jy ! Clean residual min=-0.001470 max=0.001280 Jy/beam ! Clean residual mean=-0.000005 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0819426 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.0819426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.504 mas, bmaj=12.01 mas, bpa=10.92 degrees ! Estimated noise=584.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106429 Jy ! Component: 100 - total flux cleaned = 0.00144081 Jy ! Component: 150 - total flux cleaned = 0.00171272 Jy ! Component: 200 - total flux cleaned = 0.001928 Jy ! Total flux subtracted in 200 components = 0.001928 Jy ! Clean residual min=-0.001330 max=0.001366 Jy/beam ! Clean residual mean=-0.000008 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0838706 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103412 Jy ! Component: 100 - total flux cleaned = 0.000129185 Jy ! Component: 150 - total flux cleaned = 0.000152344 Jy ! Component: 200 - total flux cleaned = 0.000163027 Jy ! Total flux subtracted in 200 components = 0.000163027 Jy ! Clean residual min=-0.001262 max=0.001374 Jy/beam ! Clean residual mean=-0.000007 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0840336 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 92 components and 0.0840336 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.047 mas, bpa=16.69 degrees ! Estimated noise=502.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55529e-05 Jy ! Component: 100 - total flux cleaned = 6.20776e-05 Jy ! Component: 150 - total flux cleaned = 9.5197e-05 Jy ! Component: 200 - total flux cleaned = 0.000126679 Jy ! Total flux subtracted in 200 components = 0.000126679 Jy ! Clean residual min=-0.001279 max=0.001232 Jy/beam ! Clean residual mean=-0.000003 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0841603 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.0841603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067350Jy sigma=0.000754 ! Fit after self-cal, rms=0.067344Jy sigma=0.000754 wmodel J0943+2028_S_2015_03_17_pus_map.mod ! Writing 113 model components to file: J0943+2028_S_2015_03_17_pus_map.mod wobs J0943+2028_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0943+2028_S_2015_03_17_pus_uvs.fits wwins J0943+2028_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J0943+2028_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305897 Jy ! Component: 100 - total flux cleaned = -0.000501558 Jy ! Component: 150 - total flux cleaned = -0.00068833 Jy ! Component: 200 - total flux cleaned = -0.000708858 Jy ! Component: 250 - total flux cleaned = -0.000709254 Jy ! Component: 300 - total flux cleaned = -0.000746561 Jy ! Component: 350 - total flux cleaned = -0.00072887 Jy ! Component: 400 - total flux cleaned = -0.000729009 Jy ! Component: 450 - total flux cleaned = -0.0007464 Jy ! Component: 500 - total flux cleaned = -0.000730203 Jy ! Component: 550 - total flux cleaned = -0.000746686 Jy ! Component: 600 - total flux cleaned = -0.000746618 Jy ! Component: 650 - total flux cleaned = -0.000715667 Jy ! Component: 700 - total flux cleaned = -0.000700284 Jy ! Component: 750 - total flux cleaned = -0.000744466 Jy ! Component: 800 - total flux cleaned = -0.000729662 Jy ! Component: 850 - total flux cleaned = -0.00077268 Jy ! Component: 900 - total flux cleaned = -0.000814781 Jy ! Component: 950 - total flux cleaned = -0.000801036 Jy ! Component: 1000 - total flux cleaned = -0.00085553 Jy ! Component: 1050 - total flux cleaned = -0.000908766 Jy ! Component: 1100 - total flux cleaned = -0.000934655 Jy ! Component: 1150 - total flux cleaned = -0.000934694 Jy ! Component: 1200 - total flux cleaned = -0.000960054 Jy ! Component: 1250 - total flux cleaned = -0.00096009 Jy ! Component: 1300 - total flux cleaned = -0.000997342 Jy ! Component: 1350 - total flux cleaned = -0.00100952 Jy ! Component: 1400 - total flux cleaned = -0.000997415 Jy ! Component: 1450 - total flux cleaned = -0.000985864 Jy ! Component: 1500 - total flux cleaned = -0.000974348 Jy ! Component: 1550 - total flux cleaned = -0.000997419 Jy ! Component: 1600 - total flux cleaned = -0.0010086 Jy ! Component: 1650 - total flux cleaned = -0.000997076 Jy ! Component: 1700 - total flux cleaned = -0.00099707 Jy ! Component: 1750 - total flux cleaned = -0.000986117 Jy ! Component: 1800 - total flux cleaned = -0.0010402 Jy ! Component: 1850 - total flux cleaned = -0.00105084 Jy ! Component: 1900 - total flux cleaned = -0.00106154 Jy ! Component: 1950 - total flux cleaned = -0.00112412 Jy ! Component: 2000 - total flux cleaned = -0.00113414 Jy ! Component: 2050 - total flux cleaned = -0.00118507 Jy ! Component: 2100 - total flux cleaned = -0.00120534 Jy ! Component: 2150 - total flux cleaned = -0.0012751 Jy ! Component: 2200 - total flux cleaned = -0.00132435 Jy ! Component: 2250 - total flux cleaned = -0.00138294 Jy ! Component: 2300 - total flux cleaned = -0.00143107 Jy ! Component: 2350 - total flux cleaned = -0.00143113 Jy ! Component: 2400 - total flux cleaned = -0.00148811 Jy ! Component: 2450 - total flux cleaned = -0.00154443 Jy ! Component: 2500 - total flux cleaned = -0.00160925 Jy ! Component: 2550 - total flux cleaned = -0.00159997 Jy ! Component: 2600 - total flux cleaned = -0.00165461 Jy ! Component: 2650 - total flux cleaned = -0.0016907 Jy ! Component: 2700 - total flux cleaned = -0.00176206 Jy ! Component: 2750 - total flux cleaned = -0.00179738 Jy ! Component: 2800 - total flux cleaned = -0.00179733 Jy ! Component: 2850 - total flux cleaned = -0.00183212 Jy ! Component: 2900 - total flux cleaned = -0.00184948 Jy ! Component: 2950 - total flux cleaned = -0.00185798 Jy ! Component: 3000 - total flux cleaned = -0.00184954 Jy ! Component: 3050 - total flux cleaned = -0.00188328 Jy ! Component: 3100 - total flux cleaned = -0.00184981 Jy ! Component: 3150 - total flux cleaned = -0.00185825 Jy ! Component: 3200 - total flux cleaned = -0.00186645 Jy ! Component: 3250 - total flux cleaned = -0.00185831 Jy ! Component: 3300 - total flux cleaned = -0.00185016 Jy ! Component: 3350 - total flux cleaned = -0.00184209 Jy ! Component: 3400 - total flux cleaned = -0.00182609 Jy ! Component: 3450 - total flux cleaned = -0.00184191 Jy ! Component: 3500 - total flux cleaned = -0.00184191 Jy ! Component: 3550 - total flux cleaned = -0.00181056 Jy ! Component: 3600 - total flux cleaned = -0.00180283 Jy ! Component: 3650 - total flux cleaned = -0.00183377 Jy ! Component: 3700 - total flux cleaned = -0.00177222 Jy ! Component: 3750 - total flux cleaned = -0.00176463 Jy ! Component: 3800 - total flux cleaned = -0.00175708 Jy ! Component: 3850 - total flux cleaned = -0.001757 Jy ! Component: 3900 - total flux cleaned = -0.00172692 Jy ! Component: 3950 - total flux cleaned = -0.00171194 Jy ! Component: 4000 - total flux cleaned = -0.00168215 Jy ! Component: 4050 - total flux cleaned = -0.00164524 Jy ! Total flux subtracted in 4096 components = -0.00164522 Jy ! Clean residual min=-0.000420 max=0.000439 Jy/beam ! Clean residual mean=-0.000002 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0825151 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 395 components and 0.0825151 Jy ![Exited script file: muppet] wmap "J0943+2028_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.047 at 16.69 degrees (North through East) ! Clean map min=-0.0009749 max=0.068727 Jy/beam ! Writing clean map to FITS file: J0943+2028_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.068727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.597729 0.597729 1.19546 2.39091 4.78183 9.56366 19.1273 38.2546 76.5093 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.047 at 16.69 degrees (North through East) ! Clean map min=-0.0009749 max=0.068727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0943+2028_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:55:17 2016